Please post here details of BT headsets that work with the new stack to stream audio,
Please include:
Headset make and model
Any issues or if it works perfect
Quality good / average / bad
Cheers!
iTECH BLUEBAND works perfectly with the new A2DP (and others!) BT Stack. Streams audio pretty well and switches to headset mode when there's an incoming call. Flawless so far!
Sound could be better, but now I need to look for a good jukebox for Pocket PC. Suddenly the JAM has become my default music player!
PS: Music drags and sometimes gets cutoff during heavy CPU activity (while I was installing some software over Active Sync and had about 45 tracks lined up on WMP!). However, the music continues from where it left off!!!
What about the Itech Clip s35?
Does anyone know I'm supposed to get the new stack to pair up with the Clip s35 so the "Default Headset" dragdown window appears and I can get the BT to start streaming MP3 music?
Keith
Hi guys,
I have a Himalaya but am just wondering - when you say you have a fully functional bluetooth stack with A2DP and which receives calls while you listen to music, do you mean a Microsoft stack on your Magician's?
Thanks
What about the Itech Clip s35?
Does anyone know I'm supposed to get the new stack to pair up with the Clip s35 so the "Default Headset" dragdown window appears and I can get the BT to start streaming MP3 music?
Keith
Hey, humans!
After searching through the forums for a couple of days, I thought I would go ahead and post to ask if anyone has a fix for the following problem...
I recently purchased the Jabra BT 620s stereo Bluetooth headphones, tapped the A2DP cabs, and got wireless stereo working (along with all of the buttons and the mic) right away.
Unfortunately, every time I turn off the headphones and reconnect them, they connect to the phone as "Hands-Free" only. In this state, I can use the answer/call/play/pause/etc. buttons and the mic, but audio is delivered through the 8125's speakers and not the headset. To fix it, I have to open the BT settings, click on the Jabra phones, Refresh (because it still says that the set is connected as "Hands-Free" and "Wireless Stereo"), and reactivate "Wireless Stereo" every time I want to listen to music.
Is there any trick/registry tweak that could help me bypass this extra step? Oh, and does anyone know of a media player that doesn't hog my resources like WMP, uses AVRCP, and can play streams?
Thanks in advance!
In response to my own (2nd) question...I've read that TCPMP respondes to AVRCP commands.
Does anyone know how to get them to work with the Jabra BT 620s headphones?
I'm continuing to look for a solution to my problem and find an alternative to WMP10, which sucks up so much memory.
I have finally managed to get Pocket Player 2.72 (http://www.conduits.com/products/player/download.asp) working with AVRCP. Although it is supposed to work right out of the box, I tried using it and received no feedback from the Jabra BT 620s's buttons.
While looking for a WMP today plugin -- one that I had hoped would have a smaller footprint while still allowing AVRCP controls to function -- I came across a post and eventually found a .dll for Pocket Player that allows me to use my Jabra's controls to influence the player.
Unfortunately, Pocket Player is a woefully bad player (even worse than WMP10 in my opinion!) and I can't get much use out of it because it “skips” constantly and forces the screen back on (it doesn't automatically shut off again) with every command from the headphones. However, for everyone who prefers PP and can't get Bluetooth to work through it, trying downloading this rar file (http://www.modaco.com/index.php?act=Attach&type=post&id=19163), unrar'ing it, and placing the enclosed .dll in your Pocket Player directory.
I personally really like pocket player, but you need to wait for v2.73 out soon apparently. If you go to conduits forum you can see alot of info on this issue.
I find it plays beautifully thru iTech Clip R35 (I admit I have a different device ie jamin).
But to your first point, I still have that problem as well, I have to manually switch on the bluetooth stereo option, I haven't found a solution for that yet.
cheers
groverbot said:
Hey, humans!
After searching through the forums for a couple of days, I thought I would go ahead and post to ask if anyone has a fix for the following problem...
I recently purchased the Jabra BT 620s stereo Bluetooth headphones, tapped the A2DP cabs, and got wireless stereo working (along with all of the buttons and the mic) right away.
Unfortunately, every time I turn off the headphones and reconnect them, they connect to the phone as "Hands-Free" only. In this state, I can use the answer/call/play/pause/etc. buttons and the mic, but audio is delivered through the 8125's speakers and not the headset. To fix it, I have to open the BT settings, click on the Jabra phones, Refresh (because it still says that the set is connected as "Hands-Free" and "Wireless Stereo"), and reactivate "Wireless Stereo" every time I want to listen to music.
Is there any trick/registry tweak that could help me bypass this extra step? Oh, and does anyone know of a media player that doesn't hog my resources like WMP, uses AVRCP, and can play streams?
Thanks in advance!
Click to expand...
Click to collapse
Hi, I just bought the BT-620s and have exactly the same problem you have mentioned, otherwise a great BT headset.
Did you ever manage to find a fix for this problem?
Using the M3100 with the itech clip S35 Headset
firstly i've been using the fit4cat tweaker which has an A2DP quality improvememt tweak - unfortunately the tweak makes the quality worse so i've tuned it off and the music quality is not too bad when playing through my car stereo. However, I need to try some decent headphnes with the unit because the ones supplied sound very tinny!
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Thirdly, I have the S35 outputting through my car stereo. When people are calling me they can hear an echo (of themselves speaking as the sound comes out through the car speakers). There is some sort of delay i suppose but this is very annoying. I'm not sure why its happening because when I tried the headset using my Sony Ericsson W800i there was no such echo!
therfore, is the echo problem an A2DP thing (as the w800i does not support it and this works ok) or is it a m3100 thing? To test this I could turn off A2DP and ry the headset again - is this possible?
any suggestions appreciated
I have the Jabra BT620s headphones and I have indentical problems.
After install all works well but as soon as you disconnect media player just plays via the phone speaker
at least you guys get it to work once. WMP never plays through my iPAQ bluetooth headset. AVRCP controls work fine though. TCPMP plays fine through the bluetooth headset as long as I pair it up before I execute TCPMP. This is exactly how it worked with my 8125.
The WMP issue is very strange and is likely yet another example of the lack of QA testing in the A2DP portion of the TyTN's implementation. I would expect that these issues will all be fixed in a subsequent TyTN ROM update.
I'm getting on ok with this
quality is pretty good both using the headset with my own sony ear buds. Vast improvement over the itech supplied ear buds.
A2DP - no skipping during normal playback and it works well - quality is not an issue through the car stereo either - not bad at all . I've even been listening to music over A2DP and running sat nav using a GPS BT receiver. A slight pause in music when GPS connects but then all runs well.
My only 2 gripes are:-
1. When you disconnect or go out of range of the headset, it reconnect perfectly with the phone application. This isn't the case with the wireless stereo. I have to enter BT settings, uncheck the wireless stereo setting, save then recheck the setting before it reconnects. Slightly annoying but accesptable (for now)
2. the echo using the headset through my car stereo. People calling me can hear themselves again (about a 0.5 second delay) through the car speakers! Just to repeat my earlier post, this does not happen with my W800i. not sure if its an A2DP problem or something else.
Similarly here, I don't seem to be able to make A2DP (and the handsfree profile, for that matter) work.
Using HTC and an Itech clip, I am able to pair the "wireless stereo" and then play music for some 10 seconds on the GS Player, after which the Wireless Stereo symbol disappears from the top bar and the connection is interrupted. I actually believe that the Itech clip is 'shut off', as I have to turn it on again.
When I try to reconnect the headset, it just won't work and the whole machine is slowed down. Only a soft reset helps.
I hope this is a ROM problem (and not mine) and it'll be fixed soon...
WMP and the Itech clip work fine for me, with the current German ROM.
a2dp issues w/th Hermes
With the CHT9000 WWE rom I had the wireless stereo drop off after about 1 minute, then I would have to reconnect. I flashed to the other dopod WWE ROM (latest) and the problem is gone....sound is comparable to my prophet. Reg tweaks suggested in other forums definetely make the sound quality worse for either ROM version. I think further updated ROM's will improve A2DP reliability (or someone may find a reg hack)...as with the prophet A2DP it just takes time.
Hi guys, I've got the vario ii and the Sony Ericsson HBH-610.
I can add the headset fine and make calls through it, but I don't know how to get the music in wmp to play through it.
If anyone has a few mins spare and could explain it for me I would be really grateful
Headsets..HBH 610...
With my CHT 9000 I use an OMIZ 5660...works great for calls and wireless stereo. I don't have any other headset to compare it to (since I only have used this brand)....I believe that if your "options" do not list wireless stereo then you can't use the A2DP function on your device, at least as it is designed to be used.
I'm not aware of a one-piece headset that supports A2DP that is available (all should have either 2 headphones or two wired ear plugs)..
THE ONLY WAY, I FIND :
I have a 590A Plantronics Bluetooth HeadSet
You must refresh Services of your iTech or your Plantronics !
Go Parameters, Bluetooth, Select your Headset, Refresh.
Then reselect services and Save !
Each time you lost the link (Bluetooth turn off or ...) you will have to Refresh,reselect and Save !
I am searching for a Solve but not find another !
I forget something else !
It is the same thing with my Bluetooth GPS (GNS).
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
So far A2DP has worked fine for me with my Nokia HS-12W. I have applied some registry settings and optimised my SD card and so far it has played with hardly a skip. Definitely better than my previous BA with WM5.
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
hutton118 said:
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
Click to expand...
Click to collapse
This is probably headset dependent because with my Nokia HS-12W if i need to reconnect i just press the Audio button and it re-establishes the A2DP connection. No going to BT settings at all.
Interesting, can you just confirm what you mean by the Audio button. Is that just hitting 'Play' in WMP?
Thanks
No, the Nokia has a Music key (not Audio, my mistake) which switches from A2DP to the built-in radio. So if i have lost the BT connection pushing the Music key to select the Audio player will re-establish the connection and music is streamed to the headset. You will see the A2DP icon on the today screen when it has connected and get the chime in the headset.
Ok, thanks for that.
Just one last point, if the connection is lost while music is streaming, does the audio switch to the phone speaker instead??
My problem is I'll be listening to music on the subway then or some reason I'll loose the connection (interferance, low battery...whatever) and immediately music starts coming out the speaker, much to my embarrassment!
Thanks again!
for all my other PDA/Phones (iPaq) i could listen to videos or music via the BT headset. but with my tytn running BlackMajik wm6, i cant. i would normally pair up my bt headet. then play a vid and sound would run contantly thru the earpiece. now i have to press the "connect" button on the earpiece and sound would play, BUT it would stop after about 10 sec and play thru the speakerphone.
i have tried both Logitech and Samsung BT headsets. both do the same thing.
is there any workaround or registry mod?
yeah. I used Destination Gotland Bluetooth Mono Sound.... It's around here on xda. just use the search
It worked on stock, black majik, and schaps 3.60.
teksoft software but not free is the best router
madman604 said:
for all my other PDA/Phones (iPaq) i could listen to videos or music via the BT headset. but with my tytn running BlackMajik wm6, i cant. i would normally pair up my bt headet. then play a vid and sound would run contantly thru the earpiece. now i have to press the "connect" button on the earpiece and sound would play, BUT it would stop after about 10 sec and play thru the speakerphone.
i have tried both Logitech and Samsung BT headsets. both do the same thing.
is there any workaround or registry mod?
Click to expand...
Click to collapse
Try Teksoft Bluemusic it is the best software available where you can route your music via any bluetooth headset, but is a paid software, you can try it, it gives 2 mins music trial period.
Regards
change the rom.I've never had this happen with any bt headset or with any rom! I play vids the same way daily. Just bought Moto S9 bt headset and am overwhealmed
anyone else have some insight beore i attempt to wipe out my pda by updating the ROM?
EDIT: I tried Bluemusic 2.0 works like a charm. MANY THANKS!!!!
Only to say I use Black Satin to watch vids daily (long train commute) with no problems at all.
My BT headset is the i-radio: http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02050
The media player I use is TCPMP.
I just found that while I had my bluetooth hbh-pv740 mono bluetooth connected and played music via media player on X1i, I pressed call button on headset and voice command went to stand by.... the I said cancel and for about 5-7 seconds the music resumed in my bluetooth headset. Then is went back to the phones' speaker.
Does anyone know of a registry hack to make it stay in the mono headset and not go back to the phone?
Or even better, make the sound come out the mono bluetooth in the first place?
Would be great somehow.
You can try a software BlueMusic.
Version 3 can use with X1.
SUPER. Thank you very much, tried and just bought this thing! Works great! I knew somehow it WILL be possible to play music over a mono bluetooth! Thanks again!