Related
When you need to input text, you can click on the icon at the bottom of the screen to bring up the text entry area. You can tap on the little triangle beside the icon to bring up a window to select between block recognizer, keyboard, letter recognizer, phone pad, and transcriber.
On my 8125, it is taking a long time for this window to pop up after tapping the triangle. It is taking a few seconds, when it used to take maybe 1/3 of a second. It is quite frustrating!
Why is is doing this? And what can I do to speed it up like it used to be?
This has happened before. It was when I first got the phone and was installing apps and games on it. One day I noticed this slow behavior, and I ended up doing a hard reset and slowly adding my apps and registry tweaks back on one at a time to see what would cause the problem. Well, nothing caused the problem and it stayed fast for a long time.
Then yesterday I updated to Summiter's latest ROM and started adding my apps back on. This text entry type window was working just fine through most of it, and suddenly as I'm finally finished putting everything back to where I want it, this problem is back!
Help! I don't want to do another hard reset already!
I have the same problem, I use transcriber as SIP but since it takes so long to show up when you click the triangle, I just put a shortcut to transcriber.exe in the start menu folder. So, I just use the Programs menu, it's much faster
I like to switch between letter recognizer, keyboard, and transcriber. I suppose I could put links to them in the start menu, but it would be so much nicer if I could just figure out why it's being so slow!
Any ideas?
I've read this is due to having MS Voice Command installed, although I haven't confirmed this myself.
I have the problem and never installed Voice Command, so there must be another explanation
anyone idea what the keyboard exe is called?
thanks
This is supposedly caused by a bug in the OS. I use an application called 'Smartskey'. There is a setting that talks about reboot notification for a Wizard. This affects the time it takes for the input method choice popup-. See the text about it from the manual:
REMOVEDUPSDDAEMON=0 (0 or 1)
Only for HTC Wizard. The function is originally not related to SmartSkey. The HTC Wizard contains a program called sddaemon that is the voice command program for wizard. It contains a bug that it will automatically create one more
notification for each reboot. It will make the program slower and slower after a number of reboot and overflow the notification system. To set this to 1 will automatically remove the duplicated notification event. If you are a user of Wizard, it is suggested to set it to 1. The flag is harmless for other machines.
I cannot remember where I downloaded the program, but if you search this forum, you should be able to find a copy.
i dont use smartskey, so is it something else causing my slowdown? i dont understand.
is that a reg key your talking about there?
funy said:
i dont use smartskey, so is it something else causing my slowdown? i dont understand.
is that a reg key your talking about there?
Click to expand...
Click to collapse
Smartskey isn't the problem. It solves a problem with the OS. zIt appears that every time the device restarts, it makes a record in a log file somewhere. Eventually, the log is so full, it takes longer and longer to pull up the menu. I don't recall all of the details, but I found it here. You can probably search to find more information.
The setting I put in the post is a smartskey.ini setting to resolve the problem.
thanks, might give it a try then
mrschwarz said:
Smartskey isn't the problem. It solves a problem with the OS. zIt appears that every time the device restarts, it makes a record in a log file somewhere. Eventually, the log is so full, it takes longer and longer to pull up the menu. I don't recall all of the details, but I found it here. You can probably search to find more information.
The setting I put in the post is a smartskey.ini setting to resolve the problem.
Click to expand...
Click to collapse
just put that ley in but stil doesnt seem to have done anything
If you're looking to get rid of the menu bar at the bottom of the Today Screen, read on. This is not a new tip, but might save you time, as there's a lot of different versions of these programs flying around. Only the one below works on WM6 / HTC Touch.
I personally find that the Menu Bars at the bottom of the Today Screen really spoil the look of the HTC Touch's sleek black/grey theme. Besides, the Comm Manager and Contacts are both accessible via the spinning cube (or the camera button if you install Double Launcher) so there's no need to have on the Today Screen, you may as well get more space for plugins, or just to keep everything looking neat and tidy. See screenshot below!
Here's how to banish them forever (?!) :
1. Download ToggleTodayIIAlpha from this link:
http://www.vijay555.com/vj/releases/vjtoggletodayii/vjtoggletodayiialpha.exe
2. Copy it to your \Windows\Startup directory. (or somewhere else and paste a shortcut instead)
3. Go into the registry and edit this key:
HKLM/Software/Vijay555/VJTodayToggle
Change these keys:
Softkeysize = 1
StartSize = 26
TrayVisible = 1
That's it! I've had no massive problems with this so far, although I haven't been testing it for too long. I'd be interested to hear how people get on in terms of stability/bugs. You WILL get problems if you try to use any of the older VJTodayToggle programs in the thread on this forum:
http://forum.xda-developers.com/showthread.php?t=243211
(SIP keyboard staying on, SIP moving to the top of the screen, menu titles disappearing but not the background, etc.)
...in fact, that's precisely why I'm sharing this info with you, as this thread is 39 pages long and it's only towards the end that things become totally clear! I'll post again if there's any unexpected side-effects, I'm currently minimising BatteryStatus and I don't know whether this will
Good luck!
Carlos
NOTES / ADVANCED
=======================
A: If you want to make your screen even neater AND still overclock your Touch, then, in step 3 above, you can make TrayVisible=0 then you can minimise the BatteryStatus plugin and it won't show up on your today screen. (right click on batterystatus icon, choose 'show rows -> minimise') I haven't tested this properly yet.
B: If you want to explore hiding the Start Menu, feel free, it looks superb when you first do it, but then I have found that the HTC biotouch (spinning cube) automatically re-instates the start menu bar when it's deactivated each time.
C: Please note, this program ( tt2.exe) DOES NOT TOGGLE, even though it's called that! Again, it's a 39 page thread, I warned you...
D: You can also run TT2.exe with a -config option to avoid editing the registry, but this would actually make the above even more long-winded to explain to any n00bs.
E: A nice new HTC wallpaper is doing the rounds without the logo. (As you can see from my screenshot, it's mis-positioned with the extra screen space) See http://forum.xda-developers.com/showthread.php?t=319830
F: Vijay555 has been meaning to release a new (non-alpha) version of the software for some time, but sounds pretty busy. He seems like an all-round splendid guy though and I'd like to thank him for this software and his continued postings/programming.
I have the HTC X7500 WM6 and I've been desperate to make it works.
I've been trying other version from the 40 pages thread, so I'll try this one and I will post result.
BigDede said:
I have the HTC X7500 WM6 and I've been desperate to make it works.
I've been trying other version from the 40 pages thread, so I'll try this one and I will post result.
Click to expand...
Click to collapse
Good luck! The honest truth is that after I'd posted this, I discovered a couple of bugs that appeared in soak testing. I gave up in the end - it worked 90% but I would still occasionally get conflict, e.g. the SIP keyboard would appear at the top of the screen sometimes and only a soft reset would put it back where it was meant to be!
carlosp_uk said:
Good luck! The honest truth is that after I'd posted this, I discovered a couple of bugs that appeared in soak testing. I gave up in the end - it worked 90% but I would still occasionally get conflict, e.g. the SIP keyboard would appear at the top of the screen sometimes and only a soft reset would put it back where it was meant to be!
Click to expand...
Click to collapse
Yep I confirm that, SIP keyboard is there, and sometimes as well softkeys stay there after softreset.
Well actually for me it's even worse, it's hiding the system tray (the bar just above the softkeys bar) where we can add shortcuts icons and keep the softkeys bar enabled..
Im disappointed but thks for vijay555 for all the efforts
Perfect... without HTC Logo is even better...
Thanks Carlos,
I've just installed and its working fine. With the clean background from http://forum.xda-developers.com/showthread.php?t=319830 looks even better.
Cheers,
Marcelo
BigDede said:
Yep I confirm that, SIP keyboard is there, and sometimes as well softkeys stay there after softreset.
Well actually for me it's even worse, it's hiding the system tray
Click to expand...
Click to collapse
See my original post, have you tried setting TrayVisible=1 in the registry, this should show the system tray.
I followed exactly what u posted, it displayed it correctly the first time, then after soft reset it was displaying only the softkeys bar and hiding the system tray bar
Thks anyway
How does this look on screens BESIDES the today screen? I have used other programs on different WM phones in the past and although the bottom bar disappears on the today screen, it is still on other screens.
Also, can you use the bottom of the screen or is it just dead space? Some of us have moved the HTC Home Plug to the bottom of the page and if it is just dead space, it is going to look bad....
maevro said:
How does this look on screens BESIDES the today screen? I have used other programs on different WM phones in the past and although the bottom bar disappears on the today screen, it is still on other screens. Also, can you use the bottom of the screen or is it just dead space? Some of us have moved the HTC Home Plug to the bottom of the page and if it is just dead space, it is going to look bad....
Click to expand...
Click to collapse
The menu bar is visible on other screens, this behaviour is by design. I cannot see why anybody would want it invisible on other screens, as you normally need those softkeys for menus in most programs!
As far as I know you can use the bottom of the screen, it is not dead space. But why not try it out - it's unlikely to do any harm. You can always delete it from your startup directory to uninstall if you don't want it.
C
Well it works well so far.....(Not my screen, Neo's screen @ HoFo)
I can't remember if the TrayVisible setting even works - I think it was something I was intending to build in, but never got around to it.
Apologies... I'm kinda programming again, had lots going on, so never finished the app. Sorry for you guys having to use my unfinished piece of cr*p. I'll make it work properly one day!
V
vijay555 said:
I can't remember if the TrayVisible setting even works - I think it was something I was intending to build in, but never got around to it.
Apologies... I'm kinda programming again, had lots going on, so never finished the app. Sorry for you guys having to use my unfinished piece of cr*p. I'll make it work properly one day!
Click to expand...
Click to collapse
Thks a lot vijay555
HELP!!!
I installed this, but I don't know how to get into the registry from an .exe file, so I just tried to open the file through my phone, and instead it has hidden my start bar, as well as the bottom bar. How do I reverse this???
maevro said:
Well it works well so far.....(Not my screen, Neo's screen @ HoFo)
Click to expand...
Click to collapse
How did you "move" the HTC Home plugin to the bottom part of the Today-screen without any plugin above it? I searched all over the forums, but I cannot find the answer to this question
--Marc
soulstar said:
HELP!!!
I installed this, but I don't know how to get into the registry from an .exe file, so I just tried to open the file through my phone, and instead it has hidden my start bar, as well as the bottom bar. How do I reverse this???
Click to expand...
Click to collapse
Just soft reset your phone.
marc2503 said:
How did you "move" the HTC Home plugin to the bottom part of the Today-screen without any plugin above it? I searched all over the forums, but I cannot find the answer to this question
Click to expand...
Click to collapse
Use the HTC Home customizer to "unlock" it. Then you can move it around like normal.
However, it doesn't redraw correctly on the right side if you unlock it, and a scrollbar comes and goes.
i have a other solution!! PCM shrink installe it and your bar remove it s very easier! For become to the original config juste delete the programmz!!
won't stick
Hi..very nice and easy Zip File..just one problem: the toggle won't stick after a soft reset = one has to go into File Explorer..double click the Toggle File and only than the screen is "clean" again.
Any way to make the toggle "stick"?
I have not this problem! I install the cab i going on the explorer and today shrink and clik on after i reboot my pda ans the bar not appear ... You can try put a abbreviated of today skrink in WINdows/started for star the application automatic on windows sartup
the result of the appl:
I have this running at startup on my Tilt, works with screen rotations and everything! And the hard keys are still mapped to calendar and contacts for quick access, awesome.
Many thanks, couldn't stand those useless soft keys before.
- Charles
SensorScroll uses the HTC Touch Diamond/PRO Gesture Wheel to scroll up and down inside windows which allow scrolling (has a scroll bar). It can also emulate key pressing instead of scrolling.
It is in beta stage, please use carefully. All bug reports, fresh ideas and recommendations are welcome.
Instructions:
1. Install the application. It adds shortcut in Programs and in \Windows\Startup folders!
2. Right after installation you can run the application from Programs shortcut to start using it. There is no need for soft reset to have it running for the first time!
3. To use the application open a Window with a vertical scroll bar like Programs or File Explorer and try rotating the scroll sensor clockwise for scroll down and counter clockwise for scroll up. Don't forget to try the touch action too (double tap on the central button to switch on/off and touch the direction keys)
4. To fine tune the application behavior use the SensorScroll Settings application
5. Have fun!
6. To stop, run it again and you will have an option to stop it.
Notes:
Inside installation folder there is a file named no_process.txt. The file contains a list of process names which will not be affected by the application (or by SensorScroll Settings). It already has some entries like opera, teeter, etc.
The application is freeware (and will always stay free)
Known issues:
* Does not work with GScroll ! Both programs act like they have disabled each other.
Todo:
* Clear the source code and add some comments
* Open the source code if i consider it good enough to be open
Search for new ideas:
We can do something with the rest of the touch sensitive area. I'm collecting ideas. We can use single, double or triple click. Known limitation: you could track press and release coordinates, but cannot track finger movement (at least I don't know how). If you come with a good idea please share it and post a reply. Thanks in advance!
History:
* v0.7.1 (20.05.2009)
- Fixed a nasty bug resulting in SensorScroll working with all programs including those who needs to be ignored
- Temporary removed windows enumeration in SensorScroll Settings. I'll try to put some more complex code to handle poorly working API functions in the next version.
* v0.7 (17.05.2009)
- Fully changed working principles. Should be much more stable and compatible now.
- Added support for screen rotation. Read the manual about the 3 key screen rotation.
- Added support for process identify. Read the manual.
- Added handling of power notifications. Now it should consume almost no CPU when suspended.
- Added support for preventing the device to go to suspended state while using the d-pad
- Added support for vibrate feedback for "touch gestures switch", "screen rotation", "process identify"
- Fixed problem with saving/loading settings with non english versions of windows mobile
- Fixed problem with double tap working not only for the center button, but also in other areas (home, back, call, end call)
- Removed process enumeration in SensorScroll Settings. This caused more problems then it solved.
Full version history can he found here
Old version 0.6 can be found here
Thanks. Works well so far. One early issue I noticed upon installing your .cab is my device freezes for no apparent reason. I am also running GScroll, may have something to do with that. I'll try disabling it and report back.
Great app...props already http://www.fuzemobility.com/?p=1479
mr.jcarter said:
Thanks. Works well so far. One early issue I noticed upon installing your .cab is my device freezes for no apparent reason. I am also running GScroll, may have something to do with that. I'll try disabling it and report back.
Click to expand...
Click to collapse
Confirmed.... Does not play nice nice w/GScroll. After disabbling GScroll it works great unfortunately I need GScroll so I can have the double tap functionality to bring up SecondToday
Randomly the program will stop working (not sure if it completely shuts down or if its actually running, but not working). Instead of scrolling the page, it will start to scroll by each item. For example, in the Program menu it will go from app to app.
Works Perfectly for me.
Thanks!
The Mobile Spoon
Working perfect - thank you!
edit: after testing as already pointed out seems to turn off.
How does this compare with the cabs already out? I mean does it work in EVERY app? I mean I use RRE's Smart Touch Wheel Scroll.cab, but I'll try this one and see if there is any difference.
Kraize - this works in far more applications. It's really an expansion because you can set it to leave the defaults in place that Diamond Tweaks puts in. The only problem appears to be that it turns off at some points. Not sure what is causing the behavior.
Great App!!! is there any way you could make this scroll through touchflo? Like left 2 right? Always wanted this....lol sorry . Anyways thank you!
AT&T FUZE Touch Pro unstable
Awesome idea! Installed it on my 1 day old AT&T FUZE and crashed a few times and rebooted the phone once. Hopefully will be fixed soon. HAve the feeling AT&T touch flow 3D is causing the issue.
Nice app any way to get this to work with S2U2?
Thank you for sharing, I will give it a try
cheers
Works fine on my Touch Pro. Tnx mate for this!
the program chashes at my touch pro after a few minutes and doens´t scoll anymore so i have to exit and restart it again.
why runing additional app when this should be integrated just need to tell registry
check this - http://forum.xda-developers.com/showthread.php?t=406206
i don't have stability problems, but the app doesn't survive the first suspend
sheitan said:
why runing additional app when this should be integrated just need to tell registry
check this - http://forum.xda-developers.com/showthread.php?t=406206
Click to expand...
Click to collapse
it's still better to import dozens of reg files after each hard reset + it works with ALL toolbar-scroll windows ^^
hello, is it possible for you to make a version wich moves LEFT <> RIGHT instead of UP <> DOWN ?
I mean to scroll tabs on manilla, to change word when typing a sms cause may big fiingers are to dummy to easily use the left right keys
PS : excuse my english, i'm french
Perfect..
It works fine on my device
Thank a lot man
Thank you for your replies! I'll check the application with GScroll. I've never used it so far. I hope it will be possible to fix the problem.
Does anyone know how to do this? I have an app idea that im trying to make work that I posted about a few days ago and no one seemed to respond. Im tackling the problem with mortscript and am almost there. I just need to figure out how how to change the spbmobileshell's active window name since it is blank and doesnt have one. It makes my script work for every program....
Is it possible to change this?
If not... Does anyone know how to make a script run that will execute only when mobile shell is active in portrait. waiting for a key board slide and will launch secondtoday... and minimize second today anytime if it is closed to portrait from a landscape position. this may seem a bit tedious, but the idea here is to make a simple script that will allow keyboard slides to open and close apps quick and easily without taking up too many resources
thanks for the help....
Hi!
I just got my new topas and I am wondering if there is a possibility to reduce the brightness of the screen when needed. As a biologist I often observe wildlife at night and look for a way to keep the screen so dim that I can just barely use it in the dark. This would help me keep my visibility down and my night vision up.
Is there any way to do this?
Best regards
Jamie White
Use this:
http://forum.xda-developers.com/showthread.php?t=548402
Hmm, doesn´t look too easy to use, but I´ll give it a try. Thanks for the quick reply!
The simplest way is to "turn the backlight off" which, with the Topaz, means a very dim backlight. You might find a small app to do that, for which you can put the shortcut in the start menu.
Alternatively, if the dimmest setting of the backlight when it's on is dim enough, you can make a shortcut to take you straight to the wm power settings page. I think the shortcut is: "20#ctlpnl cplmain.cpl,3" (without the "", just save the plain text file containing the characters as a yourname.lnk file and put it in \windows\start menu\programs folder.
Thanks Pete!
I just made the Lnk-file you suggested, but it´s still opened by word when I run it. I might have to make the file on my pc at home and see if that works out.
I think if I use a red and black desktop theme instead of the blue one I could do with the "backlight off" - option, although I have to try it out in the woods. I´m alway amazed how bright even a little light seems when you´ve been in the dark for some hours.
I just made the Lnk-file you suggested, but it´s still opened by word when I run it.
Click to expand...
Click to collapse
That's probably because WM file explorer is hiding the true extension (.txt), all you're doing is adding ".lnk" as part of the main filename. Get another file manager, I recommend Total Commander, which shows all files and their true extensions. It's even got a built in text editor, so you can modify and save your file without using Word.
The other thing I've realised since posting my reply, is some of the Control panel shortcuts don't work quite how they used to in previous versions of WM (although they won't do any harm if wrong).
I also came across this the other day http://forum.xda-developers.com/showthread.php?t=485141 which I haven't tried yet but sounds just what you're looking for.