Touch-screen alignment problem - 8125, K-JAM, P4300, MDA Vario General

Has anyone else experienced the following problem:
After using the k-Jam for a while (often after a lot of opening/closing the keyboard), my screen alignment gets out of whack. Basically the touch-screen alignment moves by about an icon's (e.g. the close application icon) width to the right.
If I do a soft reset, most of the time this fixes the alignment (though sometimes I need to run through a screen alignment wizard again to correct it).
Has anyone else experienced this? Does anyone know what might be happening?
Thanks!

Happens to me but I don't do a soft reset. I have seen this many times before in the past with other devices from different companies. What is happening is that the flexi-lead from the display to the keyboard is moving as they normally add lubicant to the flexi-cable port. What I have found that works and is quicker than a soft rest or align the screen is to simply open and close the keyboard fully.

Related

keyboard slide out problems

I did some searching for someone reporting a similar issue but i didnt find anything.
my question is with an issue im having with my cing 8125. when i slide the keyboard out, or even start to slide it out, the screen goes really crazy, and isnt readable. i tried to take some screen shots of it, but the issue doesnt show up on screen shots since the screen capture intercepts the signal before it gets to the display. has any one else had an issue like this? is it possible to open up my wizard and fix it, or am i stuck using the onscreen keyboard until i get a new phone?
Have you tried to reset your device? Maybe its really just a problem with your firmware. If it were a hardware problem, it would not only appear if you slide the keyboard out, i think.
Duke

Major problem with screen alignment

Hi to u all
i have a major problem with the screen alignment
there was a small damage on the foil thats on the screen of the tytn
Now i have flasht a new rom image and got stuck on the screen alignment
i can press the small X and it will move and starts over and over again
is there a way to bypass the screen alignment
Hope there is someone who has a solution
You need a cab install called remote screen alignment. You also need another Hermes to get the alignment settings off.
''remote Screen Alignment gets the alignment settings and stores it on your pc. If for some reason you require them to be re-entered but can't do so manually it can fix this. It was originally intended for people with poor eyesight or other problems who had trouble hitting all 5 points on the calibration. Its a freeware cab.
Hope this helps...

Alignment problem

hello guys,
I have a problem with my Htc Hd that the screen becomes not aligned, so if i am using the in screen keyboard pressing on letters always gives the wrong letter and the scroll bars will not work. I have to re-calibrate the screen for that to work again, i do that like twice or 3 times a day.
i noticed that this problem happens on the right end side of the screen, i tried to see if a specific software is causing that but i couldn't spot a single software that would cause such a problem, any help with that???
regards

Screen Alignment problem

I am sorry to disturb you all but i have a problem and i searched and read a lot of posts in vain.
the problem i am facing with my HD2 is that when i edit the screen alignment option in settings, i get the alignment option for stylus and not for finger touch.
Now i performed hard reset 4 times and i still get the same thing (the cross mark i should tap with the stylus)
Would you or could you please check what is the problem?
I am running a default 1.66.405.2 (76641) WWE rom
Thank you
Thats all your ever going to get......
its the default winmo screen alignment utility....
If youve hard reset your screen should be aligned, why do you need to alter it?
what i really want is the finger touch alignment screen you know the blinking circle cause the one i have is for stylus
Im not sure which one you mean.
Ive only ever seen the stylus based one.
Sorry.

G4 Digitizer problem?

I have a Moto G4 that has had the touch screen become very erratic lately. This issue appeared shortly after a factory reset. The phone is stock, recently OTA updated to NPJ25.93-14.7. It frequently freezes and won't respond to touches of apps or the home/back/recent buttons, and won't side scroll to the next screens properly. Sometimes random apps launch on their own without any touch, and if you try to quit them with the back button they keep relaunching. The problem is intermittent.
I activated "Show Taps" in Developer Options and when the problem is happening there is a tap dot near the lower right side of the screen. It bounces up and down a little bit and vibrates sometimes. When this dot is visible tapping on anything else like app icons or buttons usually has no effect, however the taps are shown on the screen. If I hit the power button to make the screen go black it will sometimes recover when I reopen the display, other times it takes a reboot.
Wondering if it's a hardware issue, a guy at a Verizon store who seemed to know more than most said it was a faulty digitzer--it's seeing touches where there are none. I've replaced displays successfully before, would just like to have a confidence level that the digitzer is really bad before doing that, as opposed to a software or other hardware issue. Any ideas about problems that might cause this problem, like other hardware or a corrupted OTA? Seems very hardware-ish to me, but I'm no expert.
I have Drive links to a couple of short videos on the symptoms, can send links. Much appreciate any insights.
Mine has that issue as well. It will spam the 9 key on the unlock screen or anything in that spot if an app is open or what is on that spot at the home screen. I have to double unlock the phone to fix it. I guess turning the screen on and back off resets it for that session. But it's mostly every time the screen goes dark and comes back up I have to turn the screen off and back on to use the phone.
I had a similar problem and was able to send it in under warranty and get a replacement phone
G4 Digitizer or ghost touch
Apparently this is called Ghost Touch issue, and affects many phones. One solution tried is to disable Battery Optimization for System UI and Google Now Launcher in Settings>Battery>Battery Optimization. That seemed to cure it for a week or so, but the problem returned today. I can sometimes recover form it by hitting the power button to blank the screen and then reopen. Other times it requires a reboot. I see all kinds of alleged solutions out there from dimming the brightness to removing tempered glass protector to using a slow charger, but those don't seem like real fixes but workarounds (if they even work at all). Any other ideas?

Categories

Resources