I did some searching for someone reporting a similar issue but i didnt find anything.
my question is with an issue im having with my cing 8125. when i slide the keyboard out, or even start to slide it out, the screen goes really crazy, and isnt readable. i tried to take some screen shots of it, but the issue doesnt show up on screen shots since the screen capture intercepts the signal before it gets to the display. has any one else had an issue like this? is it possible to open up my wizard and fix it, or am i stuck using the onscreen keyboard until i get a new phone?
Have you tried to reset your device? Maybe its really just a problem with your firmware. If it were a hardware problem, it would not only appear if you slide the keyboard out, i think.
Duke
Related
My Niki's touch screen won't work when the slider is open but when i close it touch screen is fine...
Anybody else having this problem??
look this thread
many other niki owners are experiencing the same problem.
look in this thread:
http://forum.xda-developers.com/showthread.php?p=2174328#post2174328
whatever it is it's a bit frustrating. it only happens when the slider is down and it happens intermittently. seems to be a hardware problem although i'm not sure and not yet willing to do a hard reset to find out. =/
Well, i've tried a hard reset. and unfortunately no dice. will eventually bring it to HTC service center to have it looked at, i guess it's a hardware issue. unless anybody else out there has a solution??
Hey guys... I'm having a lot of troubles with the lcd screen on my 8525 and this start about a month ago.. I've had this phone for almost one year... bought it as a refurb.
1. when i'm using the phone portrait mode the screen alignment would be perfect... however when i slide the keyboard open the screen goes to landscape and my alignment would be completely off. Heres the interesting part... say if it is still in landscape and i align it then.. it would work perfectly in landscape but then when i close the keyboard and go back to portrait the alignment would be extremely off again.
2. now when i'm in portrait mode and i go to start -> settings -> system -> screen and switch the screen to landscape (w.o sliding the keyboard open) the screen would be perfectly aligned... but when i slide the keyboard open... the alignment would be completely off again... now if i align it while it is in landscape (keyboard open) and go to start..settings..system..screen and change it to portrait the alignment would be perfect... but when i close the keyboard.... it would be off again...
is there anyway i can fix this? I've done a hard reset and flashed the firmware all over again... btw i'm using WM6 from the htc website. if anyone can help...lemme know what i have to do....
thankz
p.s my phones starts with s/n ht649.
Can't say I've seen that reported before. Sounds software based. You could try backing up and hard resetting.
Mike
I already tried that.. it didn't work.
Sorry, my bad - you clearly said you had done that already.
I can't fathom what hardware problem there could be. The magnet orientation switch is clearly fine it seems the X Y co-ords are not swapping over - but that seems a software matter, yet your hard reset suggests hardware - Im stumped.
Mike
If the whole screen is moving, including the start menu etc,
I have seen this before, when building my phone, if the lcd ribbon cable is not alligned perfectly this can occur... but resetting the device did not resolve the issue in this instance.
Cheers
Steve
So I guess I'll have to take it to a cellphone repair shop and have it looked at. I just hope it won't cost too much... the phone was a refurb and i got it for $100. Do you guys have any other suggestions?
Whenever i slide out the keyboard the screen either becomes unresponsive or blacks out. I tried flashing two diff roms from itje and smaberg but they both have the same problem. The screen also becomes very inaccurate and unresponsive. Anyone have such problems?
Nope, here is fine.
The question - does the situation STAY this way or just happens for a few seconds?
Now the screen doesnt even work, when i slide out the keyboard the whole screen blanks out.
custom rom?
Exactly.
The questions:
1. Do you use custom ROM's?
2. Or what did you install
Also
3. Did your phone falled down? I mean - it may be a mechanical problem with connection with 2 parts of the device, no?
I've tried 2 custom now im back on the official one, looks like its going to the service centre. I think its a mechanical problem. When the keyboard is slid out, the screen appears to power down with some colours appearing, when it is in fact still on.
I think the magnet of your x1 has some problem,as we all know,system determine the keyboard sliding by magnetic induction,
and here is a way to test it,you can put you x1 on somethings which has a big magnet, if x1's screen rotate, I think magnet of your x1 has some problem or lose,
I sent it to service center. Hope it gets fixed well.
Hey Guys,
I wonder if someone else has experienced the following: When you use your mobile during charge it's hard to use swype or "slide" through your apps since the display "jitters". I mean that when you try to do a straight line on the display it's not possible.
It's the same as with the issues the HTC HD2 displays suffered from.
It would be great if someone could confirm my experiences with the GalaxyS display.
Cheers!!!
quicky
Defective unit? mine doesnt do it.....
Well... don't know, however I didn't realize until I tried to "swype" a message. So tapping an Icon or similar "actions" work perfect. It only happens on swyping or e.g. when you slide in Launcher Pro and keep finger on display... then it doens't hold still but jums around all the time :-(
Hi,
My DZ is clearly defective. It first happened on CM7 and this is stock rom. Check it out for yourself. Whenever the keyboard it pulled out, the screen fades to black. Has anyone else had this problem? I'm posting this as I see a lot of screen problem threads and wondering if maybe this is a new one.
http://www.youtube.com/watch?v=jkAohfyfuso
I beleive the cable has been damaged. Im talking about the one under ur screen, when you slowly slide out the keyboard
Sent from my Desire Z
Did you manage to find out why it's happening? It started to happen to me as well. It doesn't seem to be a software issue since I tried different ROMs (CM7, MIUI, G-Lite) and same thing happened. I did notice later on that if I tried to open the keyboard slowly, the screen would unlock and turn on just fine. If I slide the keyboard fast like I usually do, the phone unlocks, the soft buttons and the keyboard light up, but the screen stays black.
thatmarksguy said:
Did you manage to find out why it's happening? It started to happen to me as well. It doesn't seem to be a software issue since I tried different ROMs (CM7, MIUI, G-Lite) and same thing happened. I did notice later on that if I tried to open the keyboard slowly, the screen would unlock and turn on just fine. If I slide the keyboard fast like I usually do, the phone unlocks, the soft buttons and the keyboard light up, but the screen stays black.
Click to expand...
Click to collapse
I had very similar behavior on mine and it was the ribbon cable, I can't really think of another thing that would cause that
Sent from my Bulletproof G2