I am sorry to disturb you all but i have a problem and i searched and read a lot of posts in vain.
the problem i am facing with my HD2 is that when i edit the screen alignment option in settings, i get the alignment option for stylus and not for finger touch.
Now i performed hard reset 4 times and i still get the same thing (the cross mark i should tap with the stylus)
Would you or could you please check what is the problem?
I am running a default 1.66.405.2 (76641) WWE rom
Thank you
Thats all your ever going to get......
its the default winmo screen alignment utility....
If youve hard reset your screen should be aligned, why do you need to alter it?
what i really want is the finger touch alignment screen you know the blinking circle cause the one i have is for stylus
Im not sure which one you mean.
Ive only ever seen the stylus based one.
Sorry.
Related
Has anyone else experienced the following problem:
After using the k-Jam for a while (often after a lot of opening/closing the keyboard), my screen alignment gets out of whack. Basically the touch-screen alignment moves by about an icon's (e.g. the close application icon) width to the right.
If I do a soft reset, most of the time this fixes the alignment (though sometimes I need to run through a screen alignment wizard again to correct it).
Has anyone else experienced this? Does anyone know what might be happening?
Thanks!
Happens to me but I don't do a soft reset. I have seen this many times before in the past with other devices from different companies. What is happening is that the flexi-lead from the display to the keyboard is moving as they normally add lubicant to the flexi-cable port. What I have found that works and is quicker than a soft rest or align the screen is to simply open and close the keyboard fully.
HI Guys
Recently I found that after extensive using the screen with stylus, screen alignment goes for a toss, When trying to do the screen alignemen again, after tapping centre and the for corners, alignemnt doens;'t happen and again the same screen appears....
Infact my screen is not at all damaged..
Does any one have idea if this is a bug in ROM or some other issue which is addressed ?
Currently my ROM is 1.13WWE and Radio 1.12 (PM10A)
Hi to u all
i have a major problem with the screen alignment
there was a small damage on the foil thats on the screen of the tytn
Now i have flasht a new rom image and got stuck on the screen alignment
i can press the small X and it will move and starts over and over again
is there a way to bypass the screen alignment
Hope there is someone who has a solution
You need a cab install called remote screen alignment. You also need another Hermes to get the alignment settings off.
''remote Screen Alignment gets the alignment settings and stores it on your pc. If for some reason you require them to be re-entered but can't do so manually it can fix this. It was originally intended for people with poor eyesight or other problems who had trouble hitting all 5 points on the calibration. Its a freeware cab.
Hope this helps...
My dear fellow owners of a Blue Angel ppc. I've recently updated my Blue angel to wm6.1 by xplode and was having a weird problem. My screen was de calibrating at a very steady pace (around 1mm per day) and every time I tried to align my screen the touch screen simply friezed. I had to shut the device down and turn it on again in order to leave the align screen and the touch screen was functional again.
I tough it was a problem of the rom and posted my trouble in the topic of the rom. But since I'm not the kind of person that stays put waiting for other to solve my problem I went on a search trough the forum and found out that several other members of the forum where experiencing the same problem (on other devices) and the common thing on all of them was the installation of the cube/touch flo.
I started wondering if that was my problem to. So I uninstalled cube and the touch screen stopped responding. So I soft reset the device and the touch screen was working again (I just got a error message that the touch flo couldn't be started) and I was able to successful align my screen.
In resume:
Issue: The touch screen stops responding uppon entering the "Align Screen" screen.
Important considerations: do you have touch flo or cube installed?
Solution: If yes to question above, then remove the touch flo and/or cube from your device and the problem should be solved.
thank you for reading and I hope I was useful.
Be well!
I have the same problem, but my BA did not install any touch flo nor cube!
Cound it be any other reason?
Thanks.
Could you please describe your problem in more detail? What's your rom, why can't you align screen, etc.
Use a thin card!!!
I been using this once when I had the same problem. Use a thin card and swipe it between the keyboard and the main phone. Do it on top and bottom. During the time you do it yo will hear something like a clip sound. I think thats the screen calibrator, i don't know. but it works
Not bad if you try it.
ebautista said:
I been using this once when I had the same problem. Use a thin card and swipe it between the keyboard and the main phone. Do it on top and bottom. During the time you do it yo will hear something like a clip sound. I think thats the screen calibrator, i don't know. but it works
Not bad if you try it.
Click to expand...
Click to collapse
????????????????????
You must be kidding?!
No I'm not
marko_serb said:
????????????????????
You must be kidding?!
Click to expand...
Click to collapse
No I'm not kidding. Me and My Brother-in-law did that. We have the same device. I did it first after finding somewhere in modaco. He told me that it worked.
hello guys,
I have a problem with my Htc Hd that the screen becomes not aligned, so if i am using the in screen keyboard pressing on letters always gives the wrong letter and the scroll bars will not work. I have to re-calibrate the screen for that to work again, i do that like twice or 3 times a day.
i noticed that this problem happens on the right end side of the screen, i tried to see if a specific software is causing that but i couldn't spot a single software that would cause such a problem, any help with that???
regards