Database Users

AAAHHHHH this phone stinks!!!!!!!!

WHY DOSN'T Activesync work?????
I can put up with Activesync not working under VPC on my Mac but I CANNOT put up with it not Activesyncing with a brand new 2 month old IBM laptop running XP Pro and all the latest patches.
Is it the phone that is at fault or Microsoft or a combination?????
My old PDA2K Activesyncs fine on BOTH VPC and the IBM so why not this device?
Anyone PLEASE HELP ME.......
Robin

Are you using ActiveSync v.4.1?
If it is a Windows Mobile 5 device (Wizard, Universal) instead of a Windows Mobile 2003SE Device, you need a minimum version 4.1 of ActiveSync

Yup it is a Wizard and I am using AS 4.1.
I have tried Firewall on, off, VPN on, off.
I have de-installed and re-installed 4.1.
Still NOTHING.
The Laptop see's new hardware, says it has installed okay and then AS does NOTHING.!!!!!!!!
Robin

in my case it was the firewall
you sure both your windows and software firewall is off?
also check in network connections that your phone network connection is connected
what happens in activesync... errors? does it display its trying to sync ? just "it is not syncing" doesnt help

If the laptop sees the device as new hardware and not the actual device it means that you do not have active Synch 4.1 or that the installation was borked . because 4.1 includes the drivers for this phone to be recognized by windows.. so if you had 4.1 it would show your phone name and then it might not have worked , but not the way you are describing it now.
Also you might wanna put up a bit more objective title when posting something like this if you want psotive feedback instead of flamez...

very good point avocaz
totally missed the point that it does detect but possibly does not install which would be down the active sync 4.1 not being there

akash84 said:
in my case it was the firewall
you sure both your windows and software firewall is off?
also check in network connections that your phone network connection is connected
what happens in activesync... errors? does it display its trying to sync ? just "it is not syncing" doesnt help
Click to expand...
Click to collapse
1. Certainly I turned off the Windows Firewall, don't know about any other Firewall. HOWEVER the fact my PDA2K can connect surely rules out a Firewall problem?
2. Don't know how to do this? I am a Mac user and am using XP JUST to sync my phone.
3. Nothing happens in Activesync. I get the normal, bing bong chime. but the AS icon does not turn green or open.
If I manually open AS and tellit to cennect it cannot find an attached PDA.
On the other hand if I attach my PDA2K I get the bing bong, the icon turns green, AS opens fine.
Is that clearer?
Is there any more info you need?
Robin

akash84 said:
very good point avocaz
totally missed the point that it does detect but possibly does not install which would be down the active sync 4.1 not being there
Click to expand...
Click to collapse
But surely the fact that when I connect my PDA2K AS 4.1 opens and works indicates it IS there and working?
If I check its version it says 4.1?
AS 4.1 is the first instal of AS on this machine, never had an earlier version on it.
Sorry about the title but I guessed I would at least get some response with it. :lol:
I am pulling my hair out here and don't want to return the phone but without a computer connection it is totally useless to me.
Robin

Its not your desktop. Its the AS client on the device itself that causes these problems. Apparently, the next ROM Update is supposed to fix all AS issues. Just hold on till mid-Jan.

universaldoc said:
Its not your desktop. Its the AS client on the device itself that causes these problems. Apparently, the next ROM Update is supposed to fix all AS issues. Just hold on till mid-Jan.
Click to expand...
Click to collapse
Sounds reasonable HOWEVER if I cannot get the damn thing to connect to a PC I am never going to be able to laod the new rom to fix the problem it won't connect to a pc, so I won't be able to connect ot a PC ...........
I am losing it big time...
How would I install the update without a PC connection?
Robin

Use the wifi to download the rom ? Sorry your having problems but this phone definately doesnt stink. Havent put mine down since Christmas day .... the wife is definately not pleased. She keeps giving it daggers :lol:

Okay
My FIRST bit of success.
I found out my laptop has a IRD port and the phone HAS connected via this so it is most certainly a USB issue.
Now the question is can a rom update be done of IRD or does it need to be the USB connection?
Robin
PS WiFI download would not help as the rom needs to be loaded FROM a PC.

Just a thought, but are you connecting via a usb hub?
Best not to, and I find always using the same usb socket also helps...

Robster said:
WHY DOSN'T Activesync work?????
Click to expand...
Click to collapse
Had the same problem.
What helped me is: http://support.microsoft.com/default.aspx?scid=/support/pocketpc/tshoot/activesync/default.asp
Good luck,
Radek

DO NOT INSTALL ROM UPDATE VIA IR.
It should be done via USB ONLY. Thats one of the main instructions in the ROM update page that pops up on executing the RU file.

I had problems because of the ports. AS4.X needs a hand full of ports to communicate with the PPC, in my case TCP Port 990 was already in use.

B744 said:
Just a thought, but are you connecting via a usb hub?
Best not to, and I find always using the same usb socket also helps...
Click to expand...
Click to collapse
No, I am connecting dirtectly to the laptop.
Robin

S0NIC said:
I had problems because of the ports. AS4.X needs a hand full of ports to communicate with the PPC, in my case TCP Port 990 was already in use.
Click to expand...
Click to collapse
HOw do I check this, I am not very PC Literate.
I am much more used to a Mac where things normally 'just work' :?

I have just noticed a couple of things following some of the Microsoft trouble shooting guide.
If I have AS open on the KJAM it shows the spinning green button and that it is trying to connect, still nothing on the PC end.
HOWEVER what I did notice on the PC end in Device Manager is that a Windows mobile-based device appears under netowrk connectors.
So SOME KIND of connection IS happening.
Robin
PS Many thanks for being a sounding board for me and your helpful ideas, it is very much appreciated, I just wish I was making more progress.

Let me set the record straight.
This phone does NOT stink. The more I use it the more I like it.
Certainly it is a big improvement over my PDA2K in size and usability.
HOWEVER I still cannot get it to connect to my laptop and I am getting so frustrated cause its the last thing left for me before I really start to LIKE this phone..............
Any more ideas out there because I have tried everything I can think of with no luck at all except via IRDA.
Robin

Active Sync Problem after I-Mate Upgrade

I can't perform a sync. My computer recognizes the new device, but active sync just hangs showing a window stating: "retrieving settings..."
Any ideas as to how to fix active sync?
I already tried uninstalling active sync and performing a hard reset on my Exec, but it still end up with active sync hanging.

I have the same Problem and no Idea what to do...

OK, I was able to sync using BT. Now when I connect my Exec using USB, my Exec still won't sync via USB. I already checked the settings if I had the check mark on syncing via USB and I do. I can access my SD Card via USB, but it still won't allow me to sync via USB. Any ideas?
I know I am missing a setting somewhere. Hmmmmm.

OK, another update guys, it seems that active sync allows me to install programs without syncing, so to me this is no hindrance, as long as I can access my SD Card and install applications via USB, it's good enough for me. I guess if I want to sync I just have to use BT. But any solutions on your part is also appreciated.

Hi,
somteimes that's an issue related to firewall or antivirus.
If you're using Sygate or Kaspersky that could happen.
If you use Sygate there's a file in Buzzdev.net to solve the issue.
Hope to be helpful

durius said:
Hi,
somteimes that's an issue related to firewall or antivirus.
If you're using Sygate or Kaspersky that could happen.
If you use Sygate there's a file in Buzzdev.net to solve the issue.
Hope to be helpful
Click to expand...
Click to collapse
I don't use Sygate. I do have System Suite with NetDefense Firewall. I'll try and disable my firewall to check if that is what causing me to unable to sync via USB. But how come it allows me to access my SD Card and insatall applications if my firewall is blocking active sync. Shouldn't it be blocking all functions of active sync? I'll post my update once I disable my firewall. Thanks durius.

Hi, it's not the firewall.

BUMP,
I still have this problem.

I had the same problem
1. no Activesync exept the first time
2 no Mailsynch via wireless
3 MSN messenger wouldn't log in
I did a hard reset with the same rom and voila
everything works now.
I jus deleted the wireless remove cab from the xtended rom before the hard reset as i wanted the Wireless Today item back

I also had problems with new Rom , installed ActiveSync 4.1 ,big mistake. Rolled back to 4.0 and now all perfect.

Activesync not working after ROM update HTC Wizard (Vario)
admisi said:
I also had problems with new Rom , installed ActiveSync 4.1 ,big mistake. Rolled back to 4.0 and now all perfect.
Click to expand...
Click to collapse
Hi,
I had same problem too after installing i-mate ROM - Activesync just kept saying 'Connecting...'. I went into Device Manager, disabled the Windows Mobile card within network cards, checked for updated drivers (it didn't find any so assume this step is irrelevant) then re-enabled the network card and it all worked like a dream.
Hope this helps.
Steve

I had this same issue, drove me crazy. I managed to fix it, but I'm about to be really unhelpful as I din't fix it in a particularly scientific manner.
I was so annoyed that I did the following 3 things, in this order
1 - Went to Device Manager and unistalled Windows Mobile device #X
2 - Uninstalled Activesync build 4.1.41xx, went into \windows\system32 and deleted rapi.dll, then reinstalled version 4.1.40xx something or other
3 - Turned off my firewall
I then managed to sync the phone again, turned the firewall back on. It now syncs fine, but I do still get the msg on the PPC saying "unable to get an IP address"
I sync with two PCs, my home machine and a work laptop. I don't know if maybe I was running two different versions of activesync, but I was able to sync with the laptop even while this was going on.
From what stevegiraffes says, it appears that it was actually step 1 above that fixed the issue. The strange thing was that my PPC device name had been M5000, but after managing to get the damn thing to sync at home it became WM_Ownername again; minor point.
Very odd, but major panic now over
Happy Pi day everyone!

durius said:
Hi,
somteimes that's an issue related to firewall or antivirus.
If you're using Sygate or Kaspersky that could happen.
If you use Sygate there's a file in Buzzdev.net to solve the issue.
Hope to be helpful
Click to expand...
Click to collapse
I stand corrected. It was Windows Firewall that caused the problem. I tried disabling both my firewalls again and it worked. Thanks!
Thanks to everyone that responded. I tried all your suggestions, but in the end it was the FIREWALL after all. I am glad this was over.

Active sync problems!!!!!! (with pics)

was going to upgrade to the new exec ROM today.... except Active sync decided to fail on me.
I'm running 4.1 on windows XP (SP2) and when i connect the exec via USB NOTHING happens at all, the little icon doesn't even go green or anything. i just get two "bum" and "bum, bum" sounds lol
However the LED on the exec does turn orange (the charging mode colour)
any help is much appreciated on how i can resolve this issue.
thanks everyone!

Check your ActiveSync connection settings (file -> connection settings) and make sure USB is enabled.

done that, and it is ticked....
i have also tried reinstaling active sync....

Turn OFF all your firewalls and try it again.

done that too........ followed the whole trouble shooting thing aswell... all in vain...

in the device manger from my desktop, under "network adaptors", "windows-mobile based device" is showed with a yellow circle with an explanation in it. it then states uunder "properties"
"The drivers for this device are not installed. (Code 28 )
To reinstall the drivers for this device, click Reinstall Driver."

The usual reason that ActiveSync has is the firewall. I pull out my WiFi card, disable the firewall, then connect the cable.
Once the unit has been sync'd I can put the firewall back on and get back on the net.
YMMV.
If your firewall wasn't blocking it before, then it might not be this.

quck update. when i coneect now, in the task bar a little bubble apears stating "new hardware found"
then a box appears with "Found new hardware wizard" on it.

i have a similar problem:
when i connect, activesync does recognize and attempt to sync, but when it starts 'looking for changes', it never ends! it keeps on 'looking for changes' for ever, or at least VERY LONG, ending up with an error on my PC saying that synchronisation failed and that i should restart my desktop computer, which doesn't solve thw problem..
with my blueangel i never had this problem, although i was using activesync 4.1 already back then too..
ideas, anyone?

spdfrx said:
i have a similar problem:
when i connect, activesync does recognize and attempt to sync, but when it starts 'looking for changes', it never ends! it keeps on 'looking for changes' for ever, or at least VERY LONG, ending up with an error on my PC saying that synchronisation failed and that i should restart my desktop computer, which doesn't solve thw problem..
with my blueangel i never had this problem, although i was using activesync 4.1 already back then too..
ideas, anyone?
Click to expand...
Click to collapse
i used to get that problem before, it seemed to resolve itself :?
but now nothing happens, not even the swirly motion of the active sync in the taskbar, the LEDs on my exec is the only thing that lets me know its connected. :evil:

This is exactly what I have on my computer too. The only solution for me is to turn OFF windows firewall and all other firewalls I have, then active sync works as it should be. You have to remember to turn OFF all firewalls BEFORE connecting your Universal via USB for it to work. It will not work if you connect the Universal first then shut OFF all firewalls. It has to be the other way around.

Ok i have a simlar problem, but let me explain first:
I upgraded to winmobile2005 on my Himalaya which went well and without a hitch. I was on my parents pc and i active sync' without a problem.
Ive now come home, and i cant sync. It sits there saying 'Retreaving settings...' and just doesnt go any further. Ive soft and hard reset device, checked firewalls etc - no luck.
It has identified the old active sync name, but nothing else. I can explore the device before it crashes after looking though about 5 directories/downloading large files.
How can i remove the old sync information from the device (as i guess this is the issue)?
Cheers for your time,
Sam.

have you tried to delete that partnership?

blofse said:
Ive soft and hard reset device
Sam.
Click to expand...
Click to collapse
If you already "Hard Reset" your device, then whatever information on it has already been erased clean to factory defaults, unless you are restoring from a backup program after the hard reset. Then I suggest you restore to a file prior to performing an active sync connection to your parents' computer.

cktlcmd said:
This is exactly what I have on my computer too. The only solution for me is to turn OFF windows firewall and all other firewalls I have, then active sync works as it should be. You have to remember to turn OFF all firewalls BEFORE connecting your Universal via USB for it to work. It will not work if you connect the Universal first then shut OFF all firewalls. It has to be the other way around.
Click to expand...
Click to collapse
i have turned off all my firewalls... still doesnt work...

budo*85 said:
have you tried to delete that partnership?
Click to expand...
Click to collapse
The partnership doesnt exist on my pc, and isnt listed until i plug it in.
cktlcmd said:
If you already "Hard Reset" your device, then whatever information on it has already been erased clean to factory defaults, unless you are restoring from a backup program after the hard reset. Then I suggest you restore to a file prior to performing an active sync connection to your parents' computer.
Click to expand...
Click to collapse
Well yes it used to do that on WM2003, but it doesnt on this version. And im not using a backup program. Unless the program auto-saves to my storage card in some way? In which case whats the active sync file im looking for?

budo*85 said:
spdfrx said:
i have a similar problem:
when i connect, activesync does recognize and attempt to sync, but when it starts 'looking for changes', it never ends! it keeps on 'looking for changes' for ever, or at least VERY LONG, ending up with an error on my PC saying that synchronisation failed and that i should restart my desktop computer, which doesn't solve thw problem..
with my blueangel i never had this problem, although i was using activesync 4.1 already back then too..
ideas, anyone?
Click to expand...
Click to collapse
i used to get that problem before, it seemed to resolve itself :?
but now nothing happens, not even the swirly motion of the active sync in the taskbar, the LEDs on my exec is the only thing that lets me know its connected. :evil:
Click to expand...
Click to collapse
you're right! it did! (i already had turned firewalls off, i always do, hate them)
and to tbe last poster: are you using activesync 4.1 at your home?

Regarding Firewall
I've posted this earlier in another thread, but I guess it is not bad to post here again
Regards
------------
Thank you for your suggestion, I would however say this "Be Careful", I would NOT turn firewall completely if I were you guys, IF I have doubt that it is due to firewall, I would turn the firewall ONLY for the Universal interface
pls find the steps here
1. Start
2. Settings
3. Control Panel
4. Security Center
5. Windows Firewall icon in the lower part
6. Advanced Tab
7. UNCHECK the Network Connection that represents your Universal
Note,
A. To be sure that you are not disableing firewall on the wrong interface, please rename your Local Area Connection (x) to your Pocket PC device, so then you would know for sure you are dealing with the RIGHT connection (I use SPV M5000), renaming it is very easy, right click on the connection in the NETWORK CONNECTIONS, then RENAME
B. Disabling firewall for all connections IS VERY DANGEROUS especially IF YOU ARE ONLINE or ON A NETWORK, you might get SERIOUS problems, from viral infections to Hacking (only God knows)
C. The above applies only for WINDOWS FIREWALL on Windows XP Service Pack 2, I have no idea how to do it with Zone Alarm or ANY other software as I dont use any, but I think there must be someway to do so.
All the best & good luck.

spdfrx said:
and to tbe last poster: are you using activesync 4.1 at your home?
Click to expand...
Click to collapse
Yes, both locations have v 4.1 installed. Does no one know of the files i should be removing on my PDA then? :S

Blofse : there are no files to remove - you've already said that you've done a hard reset and returned it to the factory settings which removes all user data and therefore, the device has nothing on it at all about partnerships with computers - i would suggest looking elsewhere for a resolution.
Budo : I think your problem is the yellow symbol on the network card entry in device manager. In this case, I would unplug the exec, righht click on this network card entry and click remove. Then uninstall activesync. Make sure the actve sync folder is deleted and check the windows\system32 folder for files called rapi.dll and ceutil.dll (these might have gone during the uninstall, but check anyway).
Reboot your PC and reinstall activesync before plugging in your exec again.
Hopefully, this will sort you out but post back if it doesn't.
Cheers,
Smiffy.

Activesync doesnt sync via USB, works great wth Bluetooth ?

Hi,
today i found a new problem which alarmed me a bit. For all these days, I have been syncing my qtek9100 with my laptop using activesync bluetooth partnership. Everything worked great all the time - no issues.
today i just tried using the usb cable to sync. I can see that the moment I connect the cable to the phone, activesync recognises the phone and presents the authentication window and then later connects me to the phone. Great till here. But then, the pc activesync window shows "Looking for changes.." for a brief moment and then shows "Syncronizing.." and gets stuckup. On the qtek side, all I see is "Connecting" and thats it. I tried to be patient but nothing happens at all.
Interesting thing is that, with this USB cable connection the Tools->Add Remove programs and Tools->Explore Pocket PC work absolutely fine. I could install a software too, successfully.
Can someone tell me if I am missing some steps coz of which it doesnt sync when on usb connection ?
Very important concern is that, if I want to upgrade the ROM I need to establish PC<->qtek connection via usb. Since I am able to explore or install software when on usb, is it safe to go ahead with upgrading process ? (the fact that i am not able to sync using usb makes me feel my partnership is not setup properly enough for me to start the upgrade)
Can anybody guide me through this ?
Anup

I have the same problem with my brand new Qtek9100 (I received it just today). I think it's just a bug in the ROM (I am using the latest stable from the XDA FTP). I don't think there is much we can do, to be honest. My ActiveSync doesn't have such problems with any of my other 6 PDAs.

Firewalls?
Guys, are you sure it's not a software firewall ? I had the same problem. Even opened up the firewall completely and it wouldn't work. If I exit the SW firewall, it works perfectly.
Hope that helps, DBo.

Re: Firewalls?
davebo said:
Guys, are you sure it's not a software firewall ? I had the same problem. Even opened up the firewall completely and it wouldn't work. If I exit the SW firewall, it works perfectly.
Hope that helps, DBo.
Click to expand...
Click to collapse
Oh !!, well thats something I need to check out. When I go bck home today, let me check it. I dont have any other firewall software installed other then the one which came with windows xp sp2.
By the way, I just let the activesync run the whole night just see what happens, and in the morning, I was presented with this error.
0x80072ee2
The server could not be reached. This can be caused by temporary network conditions.This condition is generally temporary. Try to sync again later.
Click to expand...
Click to collapse
Let me see what more I can dig into. But with this situation, is it safe to upgrade the ROM ? I mean can I assume that my activesync partnership via usb is working properly and its just a sync issue ?
Anup

Activesync 4.5 doesn't work anymore

Hi. I've had a really good search for info before posting and tried lots of things but I'm stumped!
I've got a Softbank X01HT (HTC Hermes 200). It used to work fine with AS4.2 and 4.5 but stopped working one day and hasn't worked since!
When I connect the phone via USB everything looks normal. I get bing-bong and bong-bing etc, I can see the phone is attached in device manager, the phone charges etc. etc. but AS won't connect to the phone. In AS connection setting it says USB is available etc. I have deselected advanced USB connection and tried "work"/"internet" etc.
I haven't done anything to the phone. No upgrading of ROMS or OS or anything. I even gave my laptop a first birthday!
I have a Dell Precision M60 running Win XP SP2 and a fresh installation.
I have deselected "do not allow exceptions" in Windows Firewall and AS has put exceptions for itself in there.
I am not running through a hub.
I'm hoping someone can help - maybe I missed something in all my searching for a solution.

Had something similar happen to me once. Resolved it by deleting the partnership on the pc from within active sync on pc (make sure phone isn't connected or active sync won't let you delete the partnership). Issue was with the partnership profile on the pc getting corrupted nothing to do with phone at all. Once partnership is deleted connect phone (make sure you have reset your phone settings that you have changed back to default) and set up a new partnership. Good luck and let us know if it works.
Cheers
Barney

Barney
Thanks for replying.
As mentioned, my laptop got a "first birthday" i.e. the HDD was wiped and the OS re-installed. There are therefore no pertnerships or remnants buried deep in the registry etc. to delete. In AS (with or without the phone connected) everything except for "connections settings" is greyed out.
Cheers
Bryce

Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney

tatuanui, have a look at
http://pocketpcapps.net/activetweak.aspx
maybe this freeware tool can help you
cheers jost

Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me

Active sync
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.

Thehoodedclaw_uk said:
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.
Click to expand...
Click to collapse
Thanks but, as metioned, already tried that one.

g35driver said:
Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me
Click to expand...
Click to collapse
Thanks. I wish it was something simple (yet annoying) like that...

Barneyabz said:
Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney
Click to expand...
Click to collapse
Barney
Cheers. When at work, Windows firewall is off. When at home it is on but exceptions are allowed and AS has put itself in the exceptions. Switching off the firewall completely is not an option as the admin has switched that function off (greyed out). This is no different to when it was all working so I'm not so sure it's that.
I don't have zone alarm. In fact I have re-installed very little since having reinstalled Windoze.
Keep the suggestions coming though!

tatuanui said:
Barney
Keep the suggestions coming though!
Click to expand...
Click to collapse
Had a similar problem.
Open task manager. Is RAPImgr.exe taking up all the processor time on a CPU (so will take 50% on a dual core machine, 100% on single core).
I had this issue with AS 4.5 when upgrading from the old machine (Wizard) to the new Hermes and basically had to reboot between connection attempts to get RAPIMgr to die. When I killed it manually, the computer rebooted anyway.
The problem with this seemed to be disconnecting it mid-sync and then connecting a new phone which then broke it. The way I solved it was to stop connecting the Wizard.....
Perhaps try removing the relationships on AS on the phone. I guess it might work....

Hi last suggestion I have - I know you mentioned your pc was wiped so there are no partnerships, however the first time you tried to connect your phone since then something might have gone wrong and a partnership might have started to be created but not yet completed. With your phone disconnected can you open active sync, click on "file" then on "delete mobile device" (if it allows you to - it might be greyed out) - See if that works and get back to us.
Cheers
Barney