i formated my memory card in my computer last night and now its not even reconiseing it in my MDA compact
what should i do
its a 128meg SD card
ok ive just soft reseted my mda and its found the card now
sorry to of bothered you
8) 8)
Related
Hello
Tried searching but no answers, so i will pose this question.
Normally the phone 'comes on' when you insert/remove SD card but for the past couple of days my EXEC soft resets itself whenever i insert SD card. Any thoughts please??
Thanks
PS I have a 1GB 'K-Data' branded SD card which i have been using for 3 months now, without any problems.
Have you checked if there's anything in the 2577 folder on the SD card?
V
dont use a 2577 folder on SD card, and also its Intermittant!!!!
on monday the battery was at 20% so put it down to power as after i charged the battery it was ok but today battery is at 42%..
where I can get program to format sd card? when I am formating in my mda compact i don't see it later, after format. anyone can help?
Pocket Mechanic can do it for you & your PC with a cardreader.
M
I can't use pocket mechanic because my mda don't see this sd card. when I put it in mda I have question Do you want format this card bla bla bla, then I click yes and I get it that card is formated, but when I get to the file explorer I didnt see Storage Card folder. what could it be?
I have the same problem.
I cannot read my 1GB miniSD card on my Wizard device at all any more. It started being weird yesterday but after a reset I was able to access the data, but today it is totally gone.
A 16MB one works fine. :? These cards don't generally die that easily do they?
Tried in a card-reader? I had some probs a while ago & solved it with Pocket Mechanic (scan for errors) & several formats in my card-reader & magician.
But yes your SD could have died, try it in another device to make sure.
M
I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?
Hi there,
Recently i had a problem with my jasjar: my sd card (1gb) apperars to be always "uninstalled". I tried to reinsert the memory card, soft reset the device, using another memory card... but the jasjar simply don't "see" the sd card installed.
I have many programs installed on my sd card... and I need space to store files, so please HELP! Anybody knowing something about this annoing problem?
Thank you all!
hey check in your registry settings that drivers for sd card are installed or got deleted by mistake
Thank you indeed for your replay! just a question: how can I see the registry? And what is the sd card key to verify? Thank you again.
hi, i had the same problem..i was using mini SD card with SD adapter and my universal could see it...so i just bought myself a new SD card from sandisk and have no problems now. the sandisk i am using now seems to be slightly thicker the the kingston i had.
thank you cudo, but my sd card is a "normal" size, with no adapter... and I used it with JJ untill 2 days ago, than always "uninstalled" :-(
i am getting the same issue is there any workaround?
All,
I have a 2gb Sandisk Mini SD Card in my Qtek 9100 and up until today its been working fine. However my Qtek started to behave strange today and suddenly would connect to my pc via ActiveSynch nor could it read the sd card.
Well in fear of loosing all my stuff on the sd card I tried in other phones, on another pc, in my camera....jsut to save it but I couldnt.
I ended up doing a hard reset of the Qtek since I couldnt solve the ActiveSynch issue and now its up and running.
BUT.....my SD card is only on 1gb now. :-( So what can be done ? Format it....yup but I dont have any program to do it with....
Help help help....the next step is to send the sd card back to the company I bought it from but then I'll have to wait for a new one
Please help
Jakob
Well I have just formattet the storage card with StorageTools and when I have the card in my qtek it shows 1gb
But if I put it in my camera and then connect it to my pc I see 2gb....
i had problems on my card and formated using wm5torage from the desktop...and it is working flawlessly, i suggest to do that...but usually that size problems happen in fake cards...do u filled the card some time or at least passed the 1gb limit?