Related
I 'suddenly' am unable to have my JasJar connected to Activesync. I have been successfully connecting the last two weeks and did not cahange anything to the PC's set-up.
I killed my antivirus and have no firewall software running.
I have a direct USB connection to my Laptop (no usb hub).
I have tried both Activesync V4.0 and V4.1.
I have deleted all partnerships to get a fresh start.
I have also tried to delete the PPC in the PC's device manager and connect again (I did notice the PPC was listed under the network adapters only, nothing was listed under the USB section).
Nothing seems to help and I am really desperate since I can not sync anything anymore now.
Any suggestions are more than welcome !
Thansk in advance,
Paul
have you tried another PC ? at least this way you can be sure that everything is ok .
I am travelling and will not have any access to another PC before the WE.... I did try another cable but got not lucky..
It does seem to work on another PC.
Anybody any suggestion as to what else I could try to make it work again?
firewall?, thats my pain on my work lappy, i have to vpn into work and that blocks my JJ, i get connecting but no connected, all i can do is disconnect from work which then opens the activesync ports back up. check 7438 and 5679 on your firewall
After a week with AS 4.0 I suddenly found that the only way I could get it to work was to soft reset the Jas Jar while connected. I'm guessing you've already tried that though...
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Carnivor said:
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Click to expand...
Click to collapse
I have the same problem. Get a kind of "USB not recognized" when the jasjar is on/open".
I close the Jasjar after having taken the USB out of course.
Then, after a while ( You say 10 seconds) it works fine and Activesync starts the job.
I can live with it. No soft reset needed.
Very positive to me is the fact that I can also connect to a USB HUB. So no need to plu it directly in my portable.
After connection I can open my little toy. (Gush how I love this thing)
Huib
Yes I have the same problem I only synk when the jasjar is turned off. Most probably one of the reasons apart from firewall issus is office 2003. They said to me from club-imate support that we need the newest office 2003 with sp1.
Dear All,
Please help, my new O2 EXEC is sitting here almost totally useless without ActiveSync.
I did a very stupid thing:
I plugged in the Exec via the USB cable before installing ActiveSync 4.0.
What used to happen (back inthe day 2001 etc) would be that windows would install its own driver for the portable device and then when you subsequently installed ActiveSync its drivers would not go in and hence ActiveSync would not recognise your device.
What is happening now seems like the same sort of issue in that now having installed ActveSync it is just sitting there saying no connection.
For ActiveSync 3.6 and below this is a documented problem and here is the fix
http://support.microsoft.com/kb/264693/en-us
BUT for me this does not work (well because there is no yellow unknown device in Device managers other devices).
In AUDIBLE terms
a) I get a du-duh sound when I plug in EXEC (like if you plugged in a USB key for example)
b) It shows up in the Device Manager-> Network Adapters as "Windows Mobile-based Device"
c) ActiveSync 4.0 or 4.1 does NOT give me the dulde-de-dah sound
d) ActiveSync shows no connections
Anybody any bright ideas? Surely I am not the only twonk to have inadvertently plugged in the EXEC first
Answers greatly appreciated.
BASICALLY HELP
PS: Have also looked at ActiveSync trouble shooter 2001, the ActiveSync 4.0 troubleshooting article from Msoft, tried switching off firewall, no result. Have tried deleting the Mobile-based Device, uninstalling AS 4.0, rebooting, reinstalling AS 4.0 or 4.1 then plugging EXEC,no good.
PPS: I convinced a friend to let me install AS 4.1 on his computer and then plugged in the EXEC and all was fine, so the EXEC itself is sound.
Maybe this will help:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Sorry, didn't read your message good.
Just see now you already did looked at the link....
But another idea: if your device works on your friend PC, then why not
do a clean install for the OS on your own PC?
Maybe this will solve your problem.
Dodger,
Thanks for the thoughts. Well actually thinking about a reinstall of my computer due a moments lapse of concentration is a difficult undertaking. With the backup of the on computer databases as well as over 100 applications installed, I think this would take me several person days.
Currently my thoughts are to clone the partition and then do a windows "over install" onthe clone, but logically that will not work because <of course> the whole point of an over install is that the registry and all applications are preserved.
I spent over 3 solid hours of googling, installing, uninstalling drivers yesterday trying to fix and can't believe I am the only one who has had this problem!
Perhaps somebody with a working ActiveSync can elaborate how does the EXEC show up in device manager (when its plugged in and synced), and also what device driver XP and /or Windows 2003 server would be using.
Thanks mb.
I was facing similar issue. Solution? Yes, uninstall my firewall, connect and sync with my JasjAr and then install the Firewall with Jasjar already connected !
This may help:
Open network connections on ur PC so u can see all connections.
Make sure AS (PC side) is enabled for USB
turn off JJ and plug it in to USB
Turn on JJ whilst watching the window of netwrok connections on ur PC
A new connection icon should pop up, then MAYBE dissapear again
Right click this icon, before it dissapears, and check it's enabled, then select properties
Now check the following items:
- does top box say "windows mobile based device"
- click "configure"
- under configure, is there a button somewhere (mine's working so I can't recall exactly where) that says something like "enable mobile device". If so, then you need to click this.
If this all fails, then repeat but with another USB port. The reason for this seeming waste of time is that you will get a DIFFERENT "Local area connection nn" icon, which may work for you.
I cant believe there hasnt been one mention of rebooting your PC - Which I can assume you already have done?
What OS are you running on your PC?
I have only just got my MDA PRO but this may help! as I did the same thing and for a while XP Pro wouldnt recognise the device.
Uninstall ActiveSync
Reboot PC
Install Activesync V4.0
Plug in USB Device
If there is still a problem connecting you shoudl see a USB device not recognised in your deviuce manager.
It almost seems like there is a time you have to wait before XP will respond normally to you unplugging and replugging in the USB.
Failing this you may have to uninstall Activesync and tehn remove all activesync registry keys it may have left behind! Then reboot and start again!
Just having tisproblem now, this is pïss poor of MS to still be foisting off onto us this Activesync package in such a terible state.
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Moandal said:
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Click to expand...
Click to collapse
What works for me is to turn off the handheld, and connect the cable after that. Then turn on the device if needed. Works mot of the time then.... no excuse for MS though....
Hello,
I'm currently trying to get a second hand I-Mate syncing with ActiveSync using a USB cradle. Everything else works fine, with the exception of a USB sync. When my I-Mate cradle is plugged in via USB, and the powered-on I-Mate is placed in the cradle, a Windows device message appears stating "USB Device Not Recognized". This happened with another I-Mate I was able to try and on multiple computers with multiple cradles. I'm quite baffled. I've tried verstions 3.7, 3.8 and 4.0 of ActiveSync.
I would really like to get the USB cradle working so I can try WM2005 and not have to xfer software to the I-Mate over my GRPS connection
Thanks in advance.
-Chris.
Hi Chris.
That certainly is odd since you've tried multiple ActiveSync versions on multiple PCs with multiple i-Mates!
What OS are the PCs running?
Normally when you first connect the i-mate via the cradle after installing ActiveSync, XP will launch the Add Hardware Wizard, which should find the drivers as ActiveSync installs them.
I have heard that reverting from ActiveSync 4 to 3.x can cause problems, but if you started with 3.7 & worked up from there, that isn't your issue.
Can you launch ActiveSync manually via Start - All Programs etc.?
Perhaps check the XP driver-signing policy - maybe it's stopping the driver from installing. I'd normally suggest trying a different USB port, but trying another PC covers that one .
Good luck - I know this one would annoy the hell out of me too!
Hi Chris.
That certainly is odd since you've tried multiple ActiveSync versions on multiple PCs with multiple i-Mates!
What OS are the PCs running?
Normally when you first connect the i-mate via the cradle after installing ActiveSync, XP will launch the Add Hardware Wizard, which should find the drivers as ActiveSync installs them.
I have heard that reverting from ActiveSync 4 to 3.x can cause problems, but if you started with 3.7 & worked up from there, that isn't your issue.
Can you launch ActiveSync manually via Start - All Programs etc.?
Perhaps check the XP driver-signing policy - maybe it's stopping the driver from installing. I'd normally suggest trying a different USB port, but trying another PC covers that one .
Good luck - I know this one would annoy the hell out of me too!
The PCs that I've tried have been running XP. My work machine SP1 while my home machine SP2.
I tried disabling the windows firewall in SP2 to no avail. The two other units I tried were in various states of order so that could be contributing to the issue.
The touchscreen is unresponsive on one while the other is stuck showing serial information (both issues I've found out how to resolve reading this forum, that'll make 2 more functional I-Mates!)
I have since completley removed ActiveSync from my PC at home. When I place my I-Mate into the cradle, no windows device messages appear and when I go into the device manager the I-Mate isn't even seen anymore.
I might just cut my losses and go cough up $40 for a usb bluetooth adapter for the desktop and sync that way. I'd rather not do this as I don't believe I can upgrade the ROM via bluetooth, and I'd very much like to throw WM2005 on one of these puppies, providing I can even get that far.
Ok, so a good majority will probably hate me after this.
My sync problem was caused by me not using a 5v power adapter. Yes, it was that simple. My power adapter looks like some kind of alien as it's being converted with 3 devices to conform to standard 110v north american AC. It was purchased for European users originally.
BUT, here's my saving grace. The I-Mate I was playing with won't sync via USB, it will do bluetooth and even serial but not usb???
Even more annoying is the unit I'm now using has an annoying issue with the touchscreen. If I receive a call or take care of any other incoming data activity, the screen freezes. I will not be able to use the touch screen until the battery is taken out. Very annoying, to the point I'm using the bluetooth unit. It's got the latest firmwares of the units (1.72wwe, 1.14 radio, 1337.38 for g (general?) bluetooth unit has 1,66wwe, 1.10 radio and 1337.2x for g) ...haha, sorry I thought that one was awesome and very fitting for a faulty device... just not the right number for a release...
I could get my TyTn to sync with my computer occasionally after installing AS 4.2, but ActiveSync would still disconnect itself from my device after a few minutes (I could get it to sync most times though, but I'd have to shuffle round USB ports etc)... Installed ActiveSync 4.5.0 beta (build 5509 BETA) last night, and now my phone won't sync AT ALL with my PC. AS can't even see the device, it can see it's been plugged in because it kicks into action, but nothing more ever happens apart from the (useless) Troubleshooter coming up.
Just a word of warning... Don't install 4.5 beta unless you're absolutely certain it'll work. I've gone from a somewhat-functional sync ability to absolutely nothing at all, and now I'm going to have to rollback my ActiveSync installation (if I can!)
That and the fact my TyTn won't even see my bluetooth headset (an Avro GW-BT-002, which my Alpine can both see and use absolutely fine), I'm beginning to get a little frustrated with this device.
Further proof that more often than not:
BETA = BROKEN
I've had the beta AS 4.5 for a week now and no problems whatsoever with dopod CHT9000 (hardware) using latest i-mate, dopod, or cingular ROM's.
All of these ROM's all work perfectly with sony-ericsson hbh-ds970 bluetooth headset.
After you upgraded to 4.5, did you delete your PC from the activesync partnership and rebuild a new partnership?
* Activesync > Options > press on desktop computer's name and delete it. Then, delete mobile device from desktop AS. You'll then be asked if you want to keep your file directory. Afterwards, reboot pocketpc and connect with usb cable or over bt.
It does work.
Cheers
Yep, did exactly that.
AS 4.5 works perfect with my prophet.
Issues:
Had to set-up my device again (old settings disappeared)
All programs that I installed via active sync before were gone
Top:
Improved speed of syncing files
Easier change of settings
Robin
Hmm. Beginning to wonder if I have either a dodge device, because my Alpine always synced fine
4.5 works for me with my TyTN. (slow as hell - but works).
/Martin
I can't get it to work, either. It completely blew away my partnerships... :evil:
I've gone back to AS4.2 and will wait for this to go GA before making this mistake again...
Dopod 838 Pro
Worked a treat on mine. No issues whatsoever. Biggest difference I can see is a different looking AS icon
Bloody hell...
... Beginning to think it's my computer, might end up reinstalling Windows on it this weekend. Annoyinggggggggg.
After a crap installation of AS4.5, downgraded back to 4.2, but it's still not seeing my TyTn at all, so I'm figuring that it's more likely to be a PC problem. It's not the best Windows installation either, it's become bogged down with stuff, and it never worked right after I made a couple of 'tweaks'... That's me, always fiddling with things when they work fine in the first place :roll:
I'm having similar issues with my TyTN, installed 4.5 on my PC, plug in my PDA and it starts charging (via USB) but ActiveSync can't find it, although does state that USB is available, just keeps searching?!
ActiveSync needs rebuilding from the floor, its always been a rather 'naff' featureless product.
christopherwoods said:
Bloody hell...
... Beginning to think it's my computer, might end up reinstalling Windows on it this weekend. Annoyinggggggggg.
After a crap installation of AS4.5, downgraded back to 4.2, but it's still not seeing my TyTn at all, so I'm figuring that it's more likely to be a PC problem. It's not the best Windows installation either, it's become bogged down with stuff, and it never worked right after I made a couple of 'tweaks'... That's me, always fiddling with things when they work fine in the first place :roll:
Click to expand...
Click to collapse
I had the same problem. Hard reset of my XDA Exec and it worked. draw yor own conclusions.
Have you tried turning off the "USB advanced network functionality" - this seemed to sort the same problem out for me;
go start - settings - connections - USB to PC - untick box "Enable advanced network functionality"
You are aware that AS 4,5 REQUIRES Outlook 2003 !?!?
otherwise it will not work at all
That beta works fine. The only problem I've had is related to remote NDIS interfering with my soft firewall, even after all access rules allowing it. Only workaround is to disable smart ARP filtering in Outpost Firewall or change transfer mode of phone to Serial and everythin is gravy for sync.
Your problem seems related to device manager misconfig of the device or something else.
why don't you try this from start --> run --> cmd line
set devmgr_show_nonpresent_devices=1
start devmgmt.msc
Then, once device manager loads, click view --> show hidden devices. From there, scroll down to network adapters, expand, and delete any instance of Windows Mobile-based Device. On the phone, delete Activesync relationship with PC. Then reboot computer, and plug in your phone again. Let us know if that solved your problem.
I had numerous issues with AS4.2 and AS4.5 Beta initially. And I had issues with Vista RC2 (both x64 and x86) syncing with the WMDC B3 as well.
Then it dawned on me that I was connecting my 838pro to the computer via a Belkin USB hub. So I removed the sync cable from the hub and directly attached to the computer. Now I have no more problems whatsoever (that's in the past 2 weeks.....)
So the moral is: DIRECTLY CONNECT YOUR Hermes TO THE COMPUTER'S USB PORTS!
Just put AS4.5B2 on today - no real probs - no real improvements
R
Hi christopherwoods
I am sorry if this is the wrong forum but its the only one I could find with reference to my bluetooth headset.
I am the owner of an Avro GW-BT-002 bluetooth headset which was free with my old mobi. Unfortunately I can no longer remember how to set it up or any of the other settings to use with my new Motorola V3x 3G phone. Is there any possiblity that you could post the instructions of its settings etc to this forum for me.
Many many thanks
Craeg
Same Issue - Fixed
I had a problem with ActiveSync after upgrading to 4.2.
I am now running 4.5B and it is working after deleting prior partnerships from my handheld.
(I am running Outlook 2007)
ActiveSync 4.5 finally working!
I had the same problems with ActiveSync 4.5 (beta) until I actually put in the original install disk I had with the phone (it had ActiveSync 3.7 on it) when I first tried to connect my phone and it wouldn't detect it. 4.5 (beta) is now working fine for me!
Hello, and thanks in adance for any help
My Magician (ROM 1.13) is no longer recognised by my PC when I connect it via USB.
The device charges, but It does not connect to sync.
PPC Activesync doe have an error rmessage;
"Verify your dialup or proxy settings"
• I have tried all the suggestions from MS Troubleshooting
• I have tried all the suggestions on this and other forums.
• I have tried disabling Firewall (Kerio)
• I have tried with upgrade to Activesync 4.5 (was previously trying with 3.8)
Coincidence? The PPC failed to connect after I installed SonicStage, and plugged in a friends MD player into the same USB cable.
?? I would have liked to try rolling back USB drivers - though not entirely sure which ones - MS Device Manager not very helpful in describing what USB controllers are actually for (i.e. USB Composite Device?) ... however
• I tried restoring PC to an earlier state via Ghost (to a point I know the connection worked) but still no joy.
So I am now conerned it may be a problem with the connection manager on the Magician itself.
I don't want to hard reset just yet because I need to sync (an have little faith/experience with xBackup - which just took close to 1 hour)
Any help/pointers most appreciated
===========================
I've been using the Magician for 1.5 years, pretty successfully - consider myself fairly adept in IT, though not a hardcore coder.
But his has me stumped.
argh double post
yup i had this happen a few times, totally ticked me off.
try deleting your activesync profile and re-syncing, backup ur contacts etc first in outlook on the pc side just to make sure you dont over sync something.
other than that id say a hard reset is on the cards
double post
I always try due-diligence in researching answers before posting for help.
UPDATE
I didn't mention the specifics of my trials, but I had tried deleting the partnership in Activesync, but the problem is that my Magician just doesn't connect.
I did a hard reset, and Ghosted my PC back, but even in this "virgin" setup the Magician doesn't connect.
Am pleased that xBackup did work completely - restored everything including installed apps and settings. Small comfort.
Am now convinced that the problem is with the mini-USB port on my Magician.
Will be sending it back under 2Year warranty.