Hi,
I have just upgraded to an orange SPV m600. However, I can't seem to get it to work with my thinkoutside stowaway IR keyboard. Apparently it "should" work with the windows mobile 5 drivers but its not even installing the software.
I can get it to install ok occasionally get the following after the soft reset.
"The keyboard driver ("StowawayXT.dll") has not been loaded on the system.
Please use the correct installation process."
Anyone else had any problems with this, or indeed, got it working ?
thanks
Matt
Have actually managed to install it now.
Howver, I now get
"keyboard driver not functioning"
"the keyboard driver "stowaway.dll" is not responding. Please re-install."
any ideas ?
thanks
Matt
Same thing here... Any ideas
Help, its the same issue with me...
Do you have the latest driver?
http://www.thinkoutside.com/support/download.asp?did=161&pid=9&link=/support/Download Support/PPC5/En/dr/Think Outside ppc5 En.zip
Works for me.
You were right Lucas... How simple, yet profound. Works great now. Thanks.
Related
Yorch, yorch.net has finally performed a Miracle! He brought back my Pocketop keyboard from the dead. He gave it a new life, now I CAN USE IT. May GOD BLESS YORCH and may He not forget those thiefs at Pocketop.
The driver as given to me by YORCH is attached.
*****!!! I BELIEVE THAT ITS USE IS LEGITIMATE FOR ALL OWNERS OF THE POCKETOP KEYBOARD******!!!!!!!!!!!!!
Pocketop & the Magician?
Anyone tried this driver with the Magician??
Dont really want to mess it up if the driver's wrong
Thanks
For any interested I have modified the file to install on a magician and it works a treat, can't see why it shouldn't work on any other HTC device with some modification, pm me.
How to modify the driver?
I'm interested in how you have modified the driver, cause i'd want to use it with the Trinity.
Tnx
Pocketop driver for HTC P3600
Eureka!!!
I've modified the Pocketop driver to work with the HTC P3600.
It works !!!
rungaldin said:
Eureka!!!
I've modified the Pocketop driver to work with the HTC P3600.
It works !!!
Click to expand...
Click to collapse
can you show me were are the directions to do it?
I know that this is old but can some one help me? Been trying to edit this but no luck.
I've modified the Pocketop driver to work with the Dell x50v wm6 following Gillius post. http://www.aximsite.com/boards/x50-x51-accessories/104638-pocketop-driver-hack-axim-x51v-wm5.html
It works !!! All credits to Gillius.
Installation:
1. Go to start -> settings -> Connections -> Beam and ensure that "recieve all incoming beams" is disabled.
2. To install the driver, copy the CAB to the device and run it.
3. The installer probably will not ask you to restart, but if it does, let it do a soft reset.
4. Open your favorite program (like Word Mobile), and select Pocketop Keyboard and enjoy
Thanks for all your post, I have the same problem and now it has been sorted!
hx4700
Does anyone have the pocketop drivers for the HP iPaq hx4700?
It runs WM2003.
Thanks
Did anyone successfully install TomTom5 on a WindowsMobile5 device?
When I try to install it on my Qtek9000 the installation program stops after I click next on the "The following software will be installed on your device:" screen and nothing further happens.
I hope someone has had more luck than me
If you use the search function you will find that his has been discussed and solved many times.
theres posts round here on it, but quickly said, its copy the cab files to the device and run them from there, that will install it fine
works a treat and the map quality is amazing at vga
Hi everybody,
I own a HTC P3600 (under the S300+ brand) and despite a lot of attempt to setup a bluetooth connection it seems that the hardware is not recognized at all.
I have the message "there is no bluetooth hardware installed" and each time i check the BT box "activate BT" when i switch back to the activaton tab the option is unchecked. When i try to scan other devices i have an error message "problem with the bluetooth hardware"
I thought i could find a software that could verify the hardware configuration like the one we have on win XP or a driver i could install over the actual configuration but i didnt find anything.
At first the internal GPS didnt work as well but after i flashed the OS with the original OS version + the radio extension V1.48 it now works fine. However i would like to use my external BT GPS (sirf III) which is more accurate and efficient.
I'm really desperate and dont know what to do to activate the BT.
i tried hardware and soft reset, even an OS upgrade (WM6) without results.
If anyone has an idea of what i could do to test the hardware to verify if the BT is dead or if its related to a software problem.
Just one more bump and if nobody has any idea well then i give up..
dijou31 said:
Just one more bump and if nobody has any idea well then i give up..
Click to expand...
Click to collapse
Hello:
I m having the same problem with the bluetooth, i tried to turn on a a message " error bluetooth hardware". Whata did you do to fix your problem.
i apreciate a lot your help.
thanks
i have a i mate no bluetooth
no bluetooth hardware after replacing backup bat tried rom up load no go hard boot any ideas.
I have the same probleme, do you have any idea Please ?
JeremaX said:
I have the same probleme, do you have any idea Please ?
Click to expand...
Click to collapse
Try upgrading/reflashing you Radios.
same problem after a backup restore. Hardware error radio 1.56.70.11
Hi, i've discovered that is a registry problem but i don't know what is the wrong key to repalce it
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums
I don't understand why, but after updating my shift, bt and lan drivers went missing.
do you have those drivers?!?
and even more, how can you connect to the web from the vista side?!?
It doesn't work!
even if winmo side is connected, vista doesn't work and tells I am not connected!
how can I solve?!?
thank you very much!!!
luca
a few months passed, but still no answer...
hallo developers!
could anyone help me with bt?!?
I have vista on my shift, as mentioned before, after the software update bt doesn't work anymore.
when I start bt, I am asked to install drivers that shift doesn't find on the hard disc.
can you help me with the vista bt drivers?!?
I can't find them anywhere!!!
luca
viskas said:
hallo developers!
could anyone help me with bt?!?
I have vista on my shift, as mentioned before, after the software update bt doesn't work anymore.
when I start bt, I am asked to install drivers that shift doesn't find on the hard disc.
can you help me with the vista bt drivers?!?
I can't find them anywhere!!!
luca
Click to expand...
Click to collapse
You can download all Shift drivers from HTC.
Or you can select "rollback driver" in device manager...
Did you try searching for the driver online using windows update?