Yorch, yorch.net has finally performed a Miracle! He brought back my Pocketop keyboard from the dead. He gave it a new life, now I CAN USE IT. May GOD BLESS YORCH and may He not forget those thiefs at Pocketop.
The driver as given to me by YORCH is attached.
*****!!! I BELIEVE THAT ITS USE IS LEGITIMATE FOR ALL OWNERS OF THE POCKETOP KEYBOARD******!!!!!!!!!!!!!
Pocketop & the Magician?
Anyone tried this driver with the Magician??
Dont really want to mess it up if the driver's wrong
Thanks
For any interested I have modified the file to install on a magician and it works a treat, can't see why it shouldn't work on any other HTC device with some modification, pm me.
How to modify the driver?
I'm interested in how you have modified the driver, cause i'd want to use it with the Trinity.
Tnx
Pocketop driver for HTC P3600
Eureka!!!
I've modified the Pocketop driver to work with the HTC P3600.
It works !!!
rungaldin said:
Eureka!!!
I've modified the Pocketop driver to work with the HTC P3600.
It works !!!
Click to expand...
Click to collapse
can you show me were are the directions to do it?
I know that this is old but can some one help me? Been trying to edit this but no luck.
I've modified the Pocketop driver to work with the Dell x50v wm6 following Gillius post. http://www.aximsite.com/boards/x50-x51-accessories/104638-pocketop-driver-hack-axim-x51v-wm5.html
It works !!! All credits to Gillius.
Installation:
1. Go to start -> settings -> Connections -> Beam and ensure that "recieve all incoming beams" is disabled.
2. To install the driver, copy the CAB to the device and run it.
3. The installer probably will not ask you to restart, but if it does, let it do a soft reset.
4. Open your favorite program (like Word Mobile), and select Pocketop Keyboard and enjoy
Thanks for all your post, I have the same problem and now it has been sorted!
hx4700
Does anyone have the pocketop drivers for the HP iPaq hx4700?
It runs WM2003.
Thanks
Related
Hi,
Ive got 5 CAB files which all go together to run a little program i have written, however, when installing them on my XDA IIS every one of them displays the message 'The program you installed may not display properly because it was designed for a previous version of windows Mobile software'. I think these errors may become a problem when i place it in the Extended Rom folder.
the files are as follows
- OpenNETCF.PPC3.ARM
- MyProgram_PPC.ARM.CAB
- sql.ppc3.arm.CAB
- sqlce.dev.ppc3.arm.CAB
- sqlce.ppc3.arm.CAB
Any suggestions would be great!
Thanks,
James
Hi LinQ
The problem is that the OpenNETCF and SQL CAB files were built for WM2003 and _NOT_ WM2003SE. This means that WM2003SE cannot verify that they will work correctly with features such as the screen rotation facility.
To stop your app from coming up with the same message, you need to download the WM2003SE SDK from MS (haven't got a link sorry... but google for it and you should find it) and then target your application at the new WM2003SE device option that you get.
Hope that helps
Softick released Card Export 2.15 today and recommended I try it. Sure enough, it works, even on my Mac! There is a catch however, you must enable the following option in Preferences -> Hardware:
- Use Dumb Endpoint
(Alt Init Order may also help if you're having issues, but on my Mac it made no difference either way)
I have attached the .cab since it seems only an exe is available on the website, this should be useful for other Mac users without VirtualPC.
Enjoy!
Nope, doesnt work with my T-Mobile MDA Vario with latest Qtek ROM.
Same problem as v2.12, it hangs when you get the balloon with 'Found new USB device'. I used an Acer Travelmate laptop with Windows XP Pro with latest patches.
Thanks mate...
Works like a dream, solved part of my mac/WM5 problems, now sync to entourage is the only one left...
Do not suppose you got a wondersolution to that Sprezzatura
I mean MissingSync and PocketMac does not yet.
Thanks again for the tip off...
Tubbie
molski said:
Nope, doesnt work with my T-Mobile MDA Vario with latest Qtek ROM.
Same problem as v2.12, it hangs when you get the balloon with 'Found new USB device'. I used an Acer Travelmate laptop with Windows XP Pro with latest patches.
Click to expand...
Click to collapse
I had the same issue until i read a post on the Softick forum. Softick support and another user suggested enabling a combination of "Alt init order" and "Use dumb endpoint" in Card Export Preferences (Hardware tab) as with what sprezzatura posted above.
Now i can use the software perfectly and can swap to / from ActiveSync & Card Export with no problems and no soft resets are required (except for the mandatory reset immediately after installing Card Export)
Goto: http://softick-forum.com/index.php to read what others have said.
Thanks sprezzatura for the heads up that they released the new version.
Cheers,
Chris
p.s. I have tested this and it works for me on every Dell, Toshiba & Clone PC / Laptop i have.
Wicked **** !!
v2.15 works perfect with those 2 settings. Great stuff !!
Hi all,..
I would like to know if it is possible to use the WM6 internet sharing on a official T-Mobile NL WM5 ROM.
Is there a (working) CAB file or something?
Regards
A.
Just copy the files to the Windows folder and create a shortcut under Start Menu>Programs>whatever folder you want.
Try this. Let us know if it works.
---
Well,..
same error. I've recently tried the CAB file from an earlier post (maybe the same one as this one),...and get the error:
INTShRUI.exe is not a Valid PocketPC application.
please advice...
regards
A.
Cheers, been looking for this
Thanks for that, have been looking for this app. for awhile now.
Softbank X01HT (Hermes) ROM contains those files, but reports "IntShrUI.exe is not a valid Pocket PC Application" when executed. The files on the X01HT ROM were: IntShrUI.exe 184 bytes, intshare.dll 208bytes.
The files posted above execute properly and detect my net connections. Now I just need to find out what to do about this message: "Cannot connect for an unknown reason. To change your connections settings tap Settings."
Will post if I find the answer.
INTShRUI.exe is not a Valid PocketPC application.
not work on my Eten M600+
but thanks anyway
Works great for me on my WM5 XDA Flame, by cable and BT !
Thank you very much !
Im gonna try it on my Treo 700wx and tell !
Hope it works!!
Have you voted guys?
Nope. Not working. Donno how to make it work.
Not workin for me too..
I don`t know it this counts but I`m using WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5 ROM
and Radio ROM 1.15.00.
I found on the net bluesoleil bluetooth stack - so I decided to change it from original one witch comes with ROM (I`ve heard that this stack is better than MS stack). I installed cab as normal program. After soft reset I lost any bluetooth settings. So I remove this stack using Remove Programs (not without problems - some files stayed) - but it didn`t help - for example I didn`t have Bluetooth settings in HTC Comm Manager - "The file 'NULL' cannot be opened.".
So I found on this forum Broadcom stack build 3900.
I have done the 3900 upgrade (using this time restartradio - according to wiki) and after this the BT fails to start due to insufficient driver memory available (there is 60mb of available program memory). I`ve no access to Advanced tab and BlueTooth Manager. Soft reset the device as instructed - same thing.
Bluetooth in Settings always shows "Bluetooth is OFF".
In Remove Programs there is no Broadcom stack, Bluesoleil was.
So, my request is - What should I do to restore standart settings comes with ROM? How to remove broadcom stack? Any ideas?
Best regards,
Watcher01
One and very easy: do a PROPER hard reset and you have everything back working and then restore your backup from before the installation of BT stack.
BTW: where did you find BlueSoleil stack for PPC? Never heard of BlueSoleil writing stacks for Windows Mobile.
Find the Helmi MS_enable cab and install it; you'll get the ms stack back.
@jakubd: The bluesoleil stack for mobile isnt working on BA; will install, but you get the Null error.
jakubd said:
One and very easy: do a PROPER hard reset and you have everything back working and then restore your backup from before the installation of BT stack.
Click to expand...
Click to collapse
Hard reset is not an option - I`ve installed to many programs to do it again -
so I`m looking for easy way to restore default stack without hardresetting
jakubd said:
BTW: where did you find BlueSoleil stack for PPC? Never heard of BlueSoleil writing stacks for Windows Mobile.
Click to expand...
Click to collapse
On other ppc forum.
DANDANA said:
Find the Helmi MS_enable cab and install it; you'll get the ms stack back.
Click to expand...
Click to collapse
I can`t find this cab. I`m looking for it on this forum and in google - nothing found till now. Also I want to remove Broadcom cause it`s using about 3 MB precious main storage, but I don`t know which files and where do I have to remove (there is no information in Remove Programs)
jakubd said:
One and very easy: do a PROPER hard reset and you have everything back working and then restore your backup from before the installation of BT stack.
Click to expand...
Click to collapse
Hard reset is not an option - I`ve installed to many programs to do it again -
so I`m looking for easy way to restore default stack without hardresetting
jakubd said:
BTW: where did you find BlueSoleil stack for PPC? Never heard of BlueSoleil writing stacks for Windows Mobile.
Click to expand...
Click to collapse
On other ppc forum.
DANDANA said:
Find the Helmi MS_enable cab and install it; you'll get the ms stack back.
Click to expand...
Click to collapse
I can`t find this cab. I`m looking for it on this forum and in google - nothing found till now. Also I want to remove Broadcom cause it`s using about 3 MB precious main storage, but I don`t know which files and where do I have to remove (there is no information in Remove Programs)
watcher01 said:
I can`t find this cab. I`m looking for it on this forum and in google - nothing found till now. Also I want to remove Broadcom cause it`s using about 3 MB precious main storage, but I don`t know which files and where do I have to remove (there is no information in Remove Programs)
Click to expand...
Click to collapse
Here... in the first post
DANDANA said:
Here... in the first post
Click to expand...
Click to collapse
Thanks man, you saved my life.
I have my HTC Shift bought in EN.
I localized it to Czech language by VISTA CZ.
On web and in old installation I found:
INTEL drivers,
Realtek sound drivers,
VGA driver,
AuthenTec Fingerprint Driver
Synaptics Pointing Device Driver,
HTC control center,
ORIGAMI
---------------------
BUT I can not find:
HTC VistaEC driver, V1.0.0.6
HTC TrunON Devices solution
CSR Vista Audio Feature Pack V1.05
Marvell SD8686 Wireless LAN SDIO Driver, V8.114.123.139
HTC G-Sensor Driver, V1.0.0.2
HTC Touch Screen Driver, V1.0.0.2
HTC TrunOFF Devices solution
Intel Graphic Driver addin solution
Intel Graphic Driver addiin
MicroSoft HotFix KB934796(USB)
MicroSoft HotFix KB929761(WUSA)
Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)
Can anybyody help me?
RIP it from original VISTA preinstall or from web...
sorry I cant really help. My question is where did you get origami experience 2? M shift came without it and I really want it. Would you share please?
same here, Where is it?
I thought I saw the installation file in the next folder:
c:\program files\HTC\ somewhere here
hmmmines not there...anyone wants to upload it? please?
kornelt said:
hmmmines not there...anyone wants to upload it? please?
Click to expand...
Click to collapse
I will look for it when I got home (working now)
great, thanks
Still miss marvell sd8686 driver
I worked on it very hard.
My tips :
In Program Files\HTC dir are all apps.
In WINDOWS\SYSTEM32 are
1.REG
BT.REG
ENABLEUAC.REG
D.REG
DE.REG
DS.REG
-----
Hotfixes is possible to download from MS web
MicroSoft HotFix KB934796(USB)
MicroSoft HotFix KB929761(WUSA)
-----
To install ALL of it automatically You should run only 1.REG.
After restall all will autostart.
(on clear system must be before it instaled /or imported/ all drivers)
more is
http://forum.xda-developers.com/showthread.php?t=374885
All drivers I extracted by DRIVERMAX and DriverGenius App.
Except marvell sd8686 driver for WiFi.
Dont You have any idea ?
HTC Shift WLAN problem
Have you had any problems with your WLAN Marvell sd8686. I can not seem to get mine to work correctly. It seems to have some problem with it. When I go to connect to a network. It does not show any of the 4 networks that should be in range. 1 sits 2 feet away. I have tried everything com manager turn off and on, reinstall device, restart, Format and reinstall Vista. It was working for the first day then I turned it off and back on after that I have had to mess with it like restarting etc. It works sometimes and others it doesnt. I tried to find new drivers but cant seem too. I called HTC europe support but they are closed. Any Help would be great.
WiFi
I have problem with driver.
In system manager is written: Driver is not working.
So I dont have WiFi to use.
I need do driver install process first time.
But I dont have driver package......
Vista drivers shift
Hello every one,
Can one of you guys can help, my computer tech did, format the shift hdd drive so lost every thing including restore partition... I did reinstall vista but still no drivers !
Does one of you guys have all the drivers like a .zip pack or can some one do it for me ?
Sorry for this but htc wont help me so must try other ways...
Cordially,
Manga23
Windows Mobile Device Center is avaiable on Internet, add-on for Vista.
mickeyace said:
Have you had any problems with your WLAN Marvell sd8686. I can not seem to get mine to work correctly. It seems to have some problem with it. When I go to connect to a network. It does not show any of the 4 networks that should be in range. 1 sits 2 feet away. I have tried everything com manager turn off and on, reinstall device, restart, Format and reinstall Vista. It was working for the first day then I turned it off and back on after that I have had to mess with it like restarting etc. It works sometimes and others it doesnt. I tried to find new drivers but cant seem too. I called HTC europe support but they are closed. Any Help would be great.
Click to expand...
Click to collapse
This is exactly what I am finding....WiFi has somehow died a natural death, or been nullified by some activity I may have been doing (lots of reinstalls etc)....
Did you find any help? Thanks
https://phatpipez.homeftp.org/HTCShift/Shift/
just check my stuff, maybe it will help.
its always good to make an Acronis backup of your working shift.
this way you can restore it easily.
Thanks - that's very nice of you to provide those d/l's.
If you, or anyone else is running XP can you confirm the following for me in terms of the WiFi card setup from control panel?
Device Manager-Network adaptors - Marvell sd8686 - advanced
802.11bg Ad Hoc - not present
802.11D Support - disable
-Everything else "Not Present" except
Radio Off - Enable Radio
Does this match whateveryone else has listed under this Advanced tab?
For network I have configured everything to be basic/normal...taken firewall off so there's no blockages there...
Thanks
HTC shift (clio 160)
I had to format my htc shift (CLIO 160) and reinstall a new vista ultimate.
But since i done this, wifi and touchscreen doesnt work anymore.
I went on HTC website and downloaded the drivers for MARVELL SD8686 WIRELESS LAN SDIO ADAPTER and driver for touchscreen but it still not working.
Could you please help me.
Thank you
VISTA Drivers for Shif from HTC
Here are installers directly from HTC
http://www.htc.com/www/SupportDownload.aspx?p_id=60&cat=1&dl_id=82
But there's no Bluetooth drivers, are there?
BT drivers
Isnt it in VISTA directly /no drivers needed/ ?
medellinrob said:
But there's no Bluetooth drivers, are there?
Click to expand...
Click to collapse