Related
Anyone got TomTom 5 working with Windows Mobile 5?
I received my k-Jam this morning but the setup.exe bombs out so I cannot get TT5 installed at all
any help appreciated!
thanks
Try to install the .cab file instead, it should work.
thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks
TomTom 5 install Problem
I had the same problem with the auto run procedure on my mini SD card.
I solved the problem by navigating to the '2577' folder and running each cab file directly on the phone (didnt use activesync). This seemed to work for me.
However, now Im having trouble with bluetooth com ports. Tomtom configuration does not show the port numbers assigned to my paired gps reciever.
Try this
http://forum.xda-developers.com/viewtopic.php?t=29282&highlight=tt5+kjam+qtek+wm5
Let me know how well tt5 runs on the k-jam ie how smooth etc as i'm awaiting my miniSD so can't try it yet!
TomTom Navigator 5.10 works with Windows Mobile 5 and Activesync 4 - but it's NOT easy. The instructions in this thread got it working for me (though I used COM4 instead of COM0):
http://forum.xda-developers.com/viewtopic.php?t=28386
Also I found that the bluetooth GPS had to be locked on to a signal for TomTom to see it at first - was fine after that.
Although my device is a HTC Universal, it has the same OS and Activesync version as your Wizard so there's no reason why it shouldn't work. Go to the above link and enjoy :lol:
Re: re: K-Jam / Windows Mobile 5 & TomTom 5
hampers said:
thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks
Click to expand...
Click to collapse
I had the same problem. All cabs would install except the ttn cab. Here's how I solved it.
1. uninstall everything
2. install gps.cab
3. remove sd card and soft reset (this is the important bit)
4. install ttn.cab and this time it should work
Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
[/quote]
aikibrown said:
Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
Click to expand...
Click to collapse
The setup.exe is meant to be run on your PC, it uses activesync. Obviously we know this doesn't work so the solution is to get the 5.10 upgrade from TomTom website as the ZIP FILE, NOT THE EXE - this is important
Anyway, extract the zip, and copy the directory with the 4 cab files in it to your SD card (where you have the map on). Then execute the cabs one by one, using the tip by jdee246 above if any of the cabs don't want to install.
After you install it, then the fun begins trying to get the damn thing to recognise your GPS device, see the link in my earlier post for a guide
Thanks guys - the soft reset seemed to do it. The manual install worked fine in the end.
I now have to wait for TomTom support to give me a code as I already had two a few months back so I can't report on how well it runs yet. Overall tho the Wizard/k-Jam is pretty slow - esp for screen refreshes.
I did try the BAKONL hack which I use to test TomTom on various devices but the ttn.cab on that patch just will not install for me under Win Mob 5.
thans
Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.
aikibrown said:
Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.
Click to expand...
Click to collapse
Hello ,
How can I install the folder "voices" because it's not a ".cab" ?
Thanks for your help.....
Who had install Tomtom 5 on the K-jam ?
Because it's too hard for me and I don't understand everything .... :?
Thanks for your help !!!!
:idea:
In total you have to copy 4 files from your wm2003 device and paste to wm2005 in these dir:
mobile device\tomtom\CurrentMap.dat
\TomTom\TomTom\data05.bmp (voice files on cd)
\TomTom\TomTom\data05.chk (voice files on cd
\Program Files\navigator\data.chk
\Program Files\navigator\tomtom navigator.exe
\Program Files\navigator\navigator.cfg
that's all.
data05.bmp and .chk is for example, you can choose one of your own voices.
Look this up on your device other wise i send you my files so you can try them.
Good Luck
GuidO
Thanks for your help !!!!!
I try this tomorrow ....
regards.
T-Mobile MDA Compact
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!
This for all of you who are still having problems...
This is what i did to get my Tomtom working on my T-mobile MDA Compact:
1. uninstall tomtom using add/remove programs.
2. using file explorer deleted the following folders:
\tomtom
\program files\navigator
\program files\contacts navigation
3. Using a registry editor - browse the software sub-folders of HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE and delete any tomtom, tomtom navigator, and/or tomtom gps/ tomtom bluetooth supprt folders.
(in order to avoid steps 1,2,3 you can also perform a hard reset after you have backed up all your data & files)
4. Navigate to HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial
5. Now change the index key from 4 to 6.
6. Exit the registry editor.
7. Soft reset your MDA.
8. Now install TTN5
9. After following the initial setup prompts of TTN5 exit it.
10. Now install tomtom nav. 5.1 (update available from the tomtom website)
11. Go back into tomtom and select "change preferences"
12. Go into GPS CONFIGURATION
13. Select Other Bluetooth
14. Select COM5
15. Click Done
16. Give tomtom about 10 seconds and your GPS navigation should now work OK!!!!
Hope this helps everyone who is trying to get this to work. I have spent a lot of time trying to find a solution that works and this i feel is it!
Needless to say use this solution at your own risk - all i can say is that its worked for me!
once installed, use this procedure.
http://forum.xda-developers.com/viewtopic.php?t=32267
It works 100%
Re: T-Mobile MDA Compact
unknown01000 said:
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!
Click to expand...
Click to collapse
Can you confirm that HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial is correct - My Vairo didnt have that key...
Plus I seem to be having the same probs as you did but with the Qstarz Q880...
Terran
ttn.CAB won't install despite reset
Tried installing TT5.0 on my Vario, but no luck. Like posted before, it won't install ttn.CAB. I tried:
removing all TT files, also from registry
soft reset,
installing gps.CAB,
remove SD,
soft reset,
then install ttn.CAB
but it still says 'installation failed'. Aaarrrggghhhhh
Any ideas, anyone?
Has anyone managed to install Destinator 3.075 on Jasjar
Yes, try searching and you'll find your answers!
1. Copy across the "DestinatorApps" directory to the PPC manually using active sync instead of using the installer
2. Copy the "DestDll.dll" into the windows directory of the PPC manually using active sync
Now you have destator installed (almost) the DestDll.dll also needs to be registered!
3. to register the dll I used "regsvr_arm.exe". just copy it onto the device, and run then select the "DestDll.dll" to register it.
4. Run Destinator and active it with you licence code as you would have previously
i had problems with connecting the com ports on destinator....so i just followed these steps:
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device (use a free com port usually try every single port until it accepts it)
And then do this:
5. Copy the "DestinatorApps/Destinator/Destinator.ini" to your desktop
6. Open this in a hex editor and change where it says C.O.M.6 to the com port of your gps. Mine was Com4 so I just changed
the 6 to a 4.
7. Copy the "Destinator.ini" file back onto the PPC
steps 5-7 i dont know if this is necessary coz after i did these steps, i closed the destinator program and then ran it and the "GPS was found automatically"....but when u go to the gps settings on the destinator program its on COM 1....and COM 4 was not on the list......but i didnt bother trying to set it up as per instructions coz its already working for me......just another note, if u turn off your gps receiver while the destinator program is running and then turn on the receiver again ur not going to be able to connect to a gps satellite etc......u have to actually close the destinator program and start it again and it will again automatically connect ur gps......its a bit complicated trying to follow the instructions......but if u follow it properly it will work.......well it worked on my jasjar as well as my XDA II with WM2003SE.....good luck
yes, thanks hadn't thought of that....
of coarse I have tried searching, I have spent 3 hours doing so ... I have found lots of references especially to a post by believer... haven't as yet found the post which gives the actual full answer ...
found one which gave the ini mod for getting around the os check
-------
if anyone else is looking for answers that part is:
modify the [Platforms] section of C:\DestinatorApps\Installer\Console\Default.ini
add the line
P2577V351=ARM
-------
what I haven't found is the issue of the dll being registered.
Now that you have wasted everybodies time and had me write all of this, are you likely to be helpful and provide a link, (as you seem to know where it is) or are you more a smartass without a clue than a geovass.
Thank you irv777 nice to see someone with intelligence
no probs
davidberrysmith said:
Thank you irv777 nice to see someone with intelligence
Click to expand...
Click to collapse
You didnt search correct...
http://buzzdev.net/index.php?option...c=view&id=2529&catid=26&limit=15&limitstart=0
geovass, thanks for the link...
irv777, followed your instructions and the only thing I changed was to install from the consol and disconect the device when I got a error re registration of file. All the rest... Perfect.
Thanks again
Destinator on JasJar and regsvr_arm.exe
Can anybody please point me in the right direction as to find regsvr_arm.exe. I have followed all the directions so far and when I try run destinator I get a Destinator object creation error. The only thing I havn't done is the register bit, please.
here you go
Destinator turns off after some minutes
First of all, thank you everybody who gave instructions for the installation, of the Destinator specially for irv777. I followed the irv777 instructions and I could install the Destinator and configure the GPS perfectly. But I could notice that after using some minutes the Destinator, the screen of my Pocket PC turned off and when I turned it on again (using the light button), the GPS communication was lost because the GPS COM Port was changed. Does anybody have the same problem? Does anyone have any idea of what is happening in my case? I could realize that when I open the registry on HKEY_LOCAL_MACHINE/SOFTWARE/Apps/DestinatorApps of my Pocket PC it is different from the registry of the Pocket PC of my friend who installed the Destinator using the custom metodology (he doesn't have WM5). Is it the cause of that problem? If it is the cause how can I fix it? I don't know how to edit registry.
I havn't found any problems with it on mine. a possible work around for you might be to change the power and light settings so they don't turn off when you are using destinator.....
;-)
good luck
obviously i am doing something wrong here....
copy the destinator apps were in the ppc? i dont have enough memory eventhough my exec is recently formated (ppc 32mb free/destinator apps 36mb).
anybody?
edit: please mates.... i am leaving for a road trip in ten days and i could realy use a gps
Aussie topic - destinator cont'
hi guys,
I followed the instructions:
1. installed destinator on PC
2. copy all files (140MB) of them to the storage card
3. were trying to run ...\ARM\Independent\DestinatorApps\Destinator\Destinator.exe and got the error message described in the discussion
4. registered the dll in the windows directory...
now when trying to run the destinator.exe from the storage card I'm getting nothing (the screen flicker once)...
any ideas? any help would be appriciated.
irv777 said:
1. Copy across the "DestinatorApps" directory to the PPC manually using active sync instead of using the installer
2. Copy the "DestDll.dll" into the windows directory of the PPC manually using active sync
Now you have destator installed (almost) the DestDll.dll also needs to be registered!
3. to register the dll I used "regsvr_arm.exe". just copy it onto the device, and run then select the "DestDll.dll" to register it.
4. Run Destinator and active it with you licence code as you would have previously
i had problems with connecting the com ports on destinator....so i just followed these steps:
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device (use a free com port usually try every single port until it accepts it)
And then do this:
5. Copy the "DestinatorApps/Destinator/Destinator.ini" to your desktop
6. Open this in a hex editor and change where it says C.O.M.6 to the com port of your gps. Mine was Com4 so I just changed
the 6 to a 4.
7. Copy the "Destinator.ini" file back onto the PPC
steps 5-7 i dont know if this is necessary coz after i did these steps, i closed the destinator program and then ran it and the "GPS was found automatically"....but when u go to the gps settings on the destinator program its on COM 1....and COM 4 was not on the list......but i didnt bother trying to set it up as per instructions coz its already working for me......just another note, if u turn off your gps receiver while the destinator program is running and then turn on the receiver again ur not going to be able to connect to a gps satellite etc......u have to actually close the destinator program and start it again and it will again automatically connect ur gps......its a bit complicated trying to follow the instructions......but if u follow it properly it will work.......well it worked on my jasjar as well as my XDA II with WM2003SE.....good luck
Click to expand...
Click to collapse
Is the procedure similar if you have an embedded GPS?
I have a Mio P350 & want to put Destinator 3 on it, do you install the console on the PC first, if so what files & from where do you install on the PDA, & what do you install on the SD card?
Appreciate any help I can get, as the MioMap v3.2 is driving me crazy!
I have a O2 XDA II mini s and Tomtom Naviagator 5 software. I am using a Tomtom BT GPS Reciver.
When I try installing the software I get the Windows Error Box.
Can anyone give me a straight forward solution to this problem, I have trawled through just about every forum I can find to no avail.
Its driving me nuts please help!
The solution is simple really.
tomtom 5.00 is apparently not compatable with wm5... well it is just not off the CD.
You have a choise either you direct to the cd "pocket pc" and copy the zip/cab files over to your phone and install it from your phone. Then you install maps onto your hard disk and copy them to a storage point.
OR
d/l tomtom 5.** about .20 currently, install that then you will still have to copy the voice from the voice directory on the CD tp the storage on your phone and will still have to do the same with the maps.
if you want you b.t. gps to work I found to copy the gps cab file and install from the phone.
it all works very well even 5.00 but like I said you cant install from the CD.
its a pain, hope this helps
Ive Tried copying the following cab files
D:\tomtom\nveur\pocketpc\gps.zip
D:\tomtom\nveur\pocketpc\PIMMAddin.zip
D:\tomtom\nveur\pocketpc\ttn.zip
D:\tomtom\nveur\pocketpc\wizard.zip
Ive installed them on my phone but i cant find the application to launch Tomtom.
Ive also tired download the update and installing the cab files, i have the same problem with that.
Am i missing anything?
Im thinking of getting ALK CO-Pilot has anyone had any problem installing it to a Wizard.
just remove it and try d/l 5.21 off the tt website.
install it from your PC not as cab.
Also you may need to install your today cab, but this is not a normal thing. also you may have to send off for a new activation code if you used tt5 on another phone.
good luck and you will have the same problem with co-pilot as it also designed for wm2003/se so stick with tomtom.
look in the jamin section there is a post i put in about solving this problem
been searching this and many other forums but i still cannot seem to find the answer.
is wm5 only capable of working with tomtom5.21? what about earlier versions? i cannot seem to get them working on mine (version 5.0/5.1).
any idea?
To make Tomtom work on a WM5 Pocket PC you need to use version 5.21
hmmm so it looks like i will need to get newer maps for tomtom coz i hear that older US maps dun work with 5.21 right?
I am sorry I can not Help you on the Information about the USA Maps.
I Hope someone elase can?
Would have thought it would try it what have you got to loose, you can get the update fromm tomtom website for free.
yea but i cant seem to find the updates for the US map on tomtom
Hi,
I don't have a Universal but have delt with this problem with the Blue Angel.
As long as you have version 5.20 you can install the software by inserting your TomTom CD/DVD and cancelling any autorun programs that load.
You then need to download the *ZIP* file from- http://www.tomtom.com/support/index.php?Language=1&query=5.21&FID=3361
Extract the ZIP and copy the setup.exe file to it's own directory, run it and it will load the setup on the CD/DVD with some extra compatability. Everything should install then.
On my Blue Angel I find the "TomTom" icon doesn't appear in my Programs list, although everything is installed. It's just a cause of creating a shortcut to "My Device/Navigator/Tom Tom Navigator"
Also, if that fails, there is another way of doing it...
http://forum.xda-developers.com/viewtopic.php?t=28085&start=0
First of all, I had some minor problems getting Activesync to recognize my 8525. (XP, Net 2.0). After a couple of driver updates or whatever, it finally worked!
I tried flashing to a different ROM but had problems during the HardSPL procedure. I stopped it, but THEN had some problems trying to connect my 8525 to the PC!! (Activesync again, ugh!) I uninstalled & re-installed Activesync like 3 times, and FINALLY got it to work again!
Now I have problems installing .CAB files to my 8525. I keep on getting the warning:
"The program is from an unknown publisher. You should install it only...."
I press "YES" and it comes as "unsuccessful".
I press "NO" and I get the "... program cannot be installed because it is not digitally signed with a trusted certificate".
Besides having installation problems, I also noticed that Activesync keeps on disappearing/uninstalling from my PC. I have to install Activesync 4.5 every time I turn on the PC.
Can some one tell me what's going on? What should I do? Should I do a "HARD RESET"? (I have done a SOFT RESET but to no avail). I would appreciate some help. Thanks!
I found out that I shouldn't do a HARD RESET because it will erase the "unlocked" feature in my phone. (I bought the phone unlocked).
I have researched the wiki, and some threads, and ACTUALLY someone else had this problem, way back in 2006. (The .CAB problem). But no one responded.
I also had to uninstall a program I had previously installed in my 8525 due to the fact that it stopped responding. It just wouldn't work anymore. I got the same "unsigned certificate" message.
I guess I'm going to RE-INSTALL Activesync ALLL over again. Maybe it will help it or something...
(This is literally going to be like the 5th time I install Activesync. And I just got the 8525).
IF ANYBODY CAN HELP ME WITH THE .CAB PROBLEM I WOULD APPRECIATE IT.
(I'm running WM6 Pro, AT&T)
freakin piece of crap!
its STILL NOT WORKING!!!!!
It USED TO WORK! I used to be able to install .CAB files. I have only installed 2 .cab files into internal memory (NO external. dont have one yet). I installed Opera Mini, and Wifi Radar. I also installed a couple of themes. I also installed animated themes but deleted them since they wouldn't work. (I think they required some other stuff). I also deleted all the themes except for one.
THEN one day, i tried doing that HardSPL-V7, and I got to the last step but quit since I got an error telling me that if I continue the (usb?)device could stop working.
Another time I tried installing SPB Finance 2.8 .CAB and that's when I noticed it would no longer install .CAB files. (It also won't install directly using .exe)
I researched Google and the forums, and found out a guy that had the same problem (no one responded).
Today I noticed that Pocket Wifi Radar wouldn't run. It said something about the certificates. I uninstalled it, tried to install it again, but it wasn't successful.
So far this has been the history of my 8525. Could it be because the "certificates" were installed in the ORIGINAL computer profile? Since I have installed Activesync many times, I noticed every time it creates a new profile. For example, the first time it was called "Windows PC". Then it was called "Windows PC2". Just right now I installed it again, and it was going to be named "Windows PC3", but I changed the name to something else, and of course it still didn't work.
Could ANYBODY give me some tips as to what I should do? Thank you.
go to settings>connections>usb to pc. uncheck "enable advanced network functionality".
if it syncs a few times with no problems run unlocker tool found in upgrades section. then hard spl then if you feel game enough upgrade os with one of your choice.
Hope this helps... cheers
holy cow, relax guy. you are not the only person to ever get the not digitally signed message.
http://www.google.com/cse?cx=000825...igned&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
as for the hardspl problem, i responded to that thread you created, didnt you see?
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
neojammer said:
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
Click to expand...
Click to collapse
dont hit stop dude, u're suppose to hit continue. hitting stop prevents the drivers from being installed and then the RUU wont run
Well I did press "Continue" the first time and I did not see any improvements. I just saw that it installed "HTC USB Sync".
I AM able to successfully install Activesync, I just can't get .CAB files to install.
Could it be because I pressed "STOP" whenever I tried using HardSPL? Should I try and run HardSPL AGAIN and this time pressing "Continue"?
Oh, and are you sure I'm supposed to press "Continue"? After all, I do get that error about Microsoft strongly recommends that you stop this installation. It sounds fishy pressing "Continue".
I just installed Activesync ALLLL over again, but this time in the D:/ drive... still the same .CAB problem.
Oh, and I no longer have the problem where Activesync would uninstall by itself. I noticed it fixed itself yesterday.
BUT I'm still having problems installing .CAB files.
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Try installing the SDK certificates and see if that helps
Finally Works!!!!! Hard Reset!
OK, so I've been up for about 3hrs straight trying to figure this out. Reinstalled/uninstalled activesync... tried installing HardSPL again (twice)... didn't work. So I was like, you know what...f* it. I'm going to do a Hard Reset. I'm just gonna try it.
IT WORKED!!!! AND IT STILL STAYED IN WM6!!!! And I think it's still unlocked (although I've read from threads that a HR will disable the unlocked feature).
I AM GLAAAAD THAT I CAN INSTALL FILES NOW!!!! YAY!! (hehe). THANKS TO THOSE WHO TRIED TO HELP!!! SERIOUSLY. It feels really bad when no one tries to help you, even though you don't have a CLUE as to what to do.
** I solemnly swear I will no longer try to use HardSPL or try flashing to a different ROM*. I will use the ROM that came with the phone, and be glad everything is WORKING **
*= at least for until a couple of more months
AND for those who are having this problem (and it's a lot of ppl, based from search results), try a HARD RESET. It helped me anyways.
"and like j-lo's this is a big but"
Glad it worked but I wouldnt allow one bad experiance to turn you off flashing... If I were you I'd still flash hard spl ( in case you find something that you really like). It DOES make it easier to fix "bricks". But just to satisfy your curiosity, go to bootloader and see if it says that you have 2.10 or 2.30 SPL. Also if you want to try flashing, try the sd card method. Its a heap safer (from my experience) than flashing by activesync. Check the wiki for how to do it.
PS. you dot need to reformat the sd card. if you have all the stuff you want on it then just copy the .nbh to the root of the sd card and rename to "hermimg.nbh", it will load as soon as the hermes is put into bootloader and you wont have to re-install anything. Works every time for me and I've done it about 30 or 40 times...Cheers......
ultramag69 said:
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Click to expand...
Click to collapse
i think his problem is that he can't install .cab files period. he's having the same problem as me. my first phone had that prob, i updated .net 2.0 and it was fine. got my second phone here, update .net to 3.5, but still can't transfer/execute ANY cab files to my phone. the pc just doesn't recognize the phone period. i can't copy/paste, can't push anything through onto my phone. it's crazy. so what else can we do? i'd like to think i'm pretty tech savvy, but this isn't cool LOL
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
geh said:
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
Click to expand...
Click to collapse
I've got the same problem. please help
sascha.egerer said:
I've got the same problem. please help
Click to expand...
Click to collapse
I finally done a hard reset, and now all is OK.
No other solution found.
geh said:
I finally done a hard reset, and now all is OK.
No other solution found.
Click to expand...
Click to collapse
Trying the same thing for my Diamond after trying out Android on it.
Same problem here. Running android 1.0 got me into this trouble.
(Running android 0.8 multiple times did not cause this problem.)
Did anybody find a better solution than hard reset?
Re
Same problem here cant run .cab files after trying run Android 0.8.
Damn , dunno why i tried to run Android 0.8