Magician (8125) Bluetooth MP3 playing?? - JAM, MDA Compact, S100 General

Hello all!! I just want to say thank you so far for this site! its taught me a ton about my phone! but I have one unsolved question
How do I get mp3s to play through my bluetooth head set! I've heard this is possible and I would love to know how!
Thanks!

nm! found the thread!

please help me
how do u install the cabs that is posted...

Copy the cab file to your device, and then run the cab file.

Can you share the link Please?

Sure!
http://www.howardforums.com/showthread.php?t=843374&page=62&pp=15

how to play mp3s and movie audio to your bluetooth headset
try http://www.simplesmartphone.com/BlueCast/ it worked on bluetooth headset thru cingular 8125 . but will not woked on imate jam. i tried it and its great. i used a jabra bt100

Related

moto BT stereo headphones(ht820) with XDAII

Does anyone tried to connect the XDA II with the new moto BT stereo heaphones with XDAII?
I have ht820 but can not install it.
siamth said:
Does anyone tried to connect the XDA II with the new moto BT stereo heaphones with XDAII?
I have ht820 but can not install it.
Click to expand...
Click to collapse
I can connect it to listen MP3 but can't use for handfree
Anyone who can,please reply :roll: :roll:
guys, check out http://forum.xda-developers.com/viewtopic.php?p=149761#149761
if you get it working, let me know because I'd like to buy the ht820 but only if I can get it to work with both mp3 and handsfree.
mp3 and ht820
Thanapan,
You have the ht820 working with MP3? how'd you get it working with mp3? how did you get the bluetooth profile to work with it? does it come with software that you installed on your xdaII?
Best regards...
Winston
m1000 and the HT820's
Hi Guys,
I've looked everywhere and can't find a way of changing my M1000's bluetooth from V1.0 upto V1.2. If anyone knows how please enlighten us all!!! I have a friend with the XDA IIi and the headphones stream mp3's fine... ok the quality is naf, really tinny but at least he can get something out of it! So here I am with a set of bluetooth headphones a M1000 but no tunes....
See this guys
http://forum.xda-developers.com/viewtopic.php?t=27733&highlight=stereo+headphone
http://forum.xda-developers.com/viewtopic.php?t=27973&highlight=stereo+headphone
http://forum.xda-developers.com/viewtopic.php?t=14687&highlight=stereo+headphone
http://forum.xda-developers.com/viewtopic.php?t=18215&highlight=stereo+headphone

finally audio out from ms stack

hi, finally there is software to enable the audio out from ms stack to bluetooth headset. but i tried on xdaii wm5 still cannot. can anybody especially buzz fix this? Get the software from below link.
http://www.beyondthetech.com/blogs/kjam/
audio out to headset
BTAudio Utilities
These utilities will allow you to turn on/off the redirection of all system audio audio to your Bluetooth Headset.
This requires NO other hacks or modifications to your i730.
The attached ZIP file contains 3 files:
BTAudioOn.exe
BTAudioOff.exe
BTAudioToggle.exe
DONATIONS
If you find these programs useful and would like to send me money, you can donate via PayPal here.
INSTRUCTIONS:
Unzip and place these files on your i730.
- To redirect all sound to your BT headset, run BTAudioOn.exe
- To stop redirecting sound, run BTAudioOff.exe.
- To toggle the redirection on and off, run BTAudioToggle.exe.
- The effects are immediate and the program will not display anything unless there is an error.
NOTES:
BTAudioToggle.exe does not authoritatively know what the current state of audio redirection is, it simply turns the redirection on or off, alternating each time it is run. It uses a temp file, \BTAudio.tmp, to track whether it should next turn on or off. Thanks to johntchow for the icon.
The /v command-line argument will display a sucess message. Failure messages are always shown. Also, if you know how to set up a shortcut, you technically don't need both .exe's. You can run BTAudioOn.exe with the /off argument and it will do the same thing as BTAudioOff. But since each file is less than 4k, which I think is the block size for the RAM file system, it would not actually save any space so what's the point.
This was made possible mostly due to the information at http://blogs.msdn.com/cenet/archive.../12/451012.aspx
Note; Buzz or any expert out there.Please make this utility work with xdaii wm2005c. Please.....Buzz?
:lol:
It works great on my K-Jam. Too bad it is only mono. But still better than nothing!
Wouter
ya. u r luckey fren. working on your k-jam, right?. but why it didnt work on xda11wm2005c with hs820? the mic got responses from the utility but the sound still havent transfer to the bluetooth headset. Ooooo....someone who know software, please help to make this utility work. Moat of the people without widcom installed already started to enjoy all audio transfer to their headset except xda11. Buzz, are u there?
this is the original thread from pdaphonehome.com http://pdaphonehome.com/forums/showthread.php?s=&threadid=54951
When i try to turn the audio on it writtes "Failed to enable BT audio".
What have o done worng. I have put the files in Application Data. It is a Qtek 9100
Did you first turn on your bluetooth?
Sometimes this happens to me too but I now only use the BTaudioToggle tool. I made a shortcut on the todayscreen and it works great!
Wouter
Will this transfer the mic too? I would like to use it for my voip program.
John
www.skynetworks.gotdns.com
I can still use my headset for phonecalls but I don't know if it will work with a computer and VOIP. Haven't tried that one yet!
Wouter
Doesn't work on i-mate jam though
Hey, guys. Found out this great featured hack and still haven't been able to toggle ALL audio out of bluetooth headset on my i-mate jam. Doesn't work! I can only redirect audio from GSM source to headset and back, but can't redirect music from audio players.... seems to be the problem of JAM bt stack...
Who has the same problem please respond
audio out to headset
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
hi guys
don't suppose anyone has tested this stack on the IMATE JASJAR ?
Cheers
ANy one tried this on an MDA compact UK, or MDA PRO UK
I sure hope T-mobile relase a new ROM with A2DP , streaming support now MS have officially improved their own stack.
http://www.theunwired.net/?itemid=2762
tgmweb said:
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
Click to expand...
Click to collapse
I've managed to do it by using the information that can be found at http://forum.xda-developers.com/viewtopic.php?t=33756. If you set the registry value then the files work a treat (but are a bit redundant because you can switch the audio to/from headset using the button on it).
Cheers,
Steve.
have you guys tried VJVolubilis? It should work in the same manner.
V
Hi Guys!
Uuupppsss ....
unfortunately the download of the ZIP file is still not working. could anyone of the honourable sirs share it with me?
Thanks in advance.

Play music through bluetooth headset?

Is it possible to play music through a bluetooth headset? Not a stereo headset, just a normal, mono headset.
If so, does it automatically pause the music when you get a call?
yes you can using the bt audio software on http://www.htcwizardweb.net/system/files?file=btaudio.zip
download it unzip it and copy the folder to your storage card or your pda and enable or disable it at your convinience. hope i was helpfull
I tried that BT Audio app with the 750, and it doesn't work. I also tried every media player I could find...still nothing.
Has anyone had success with this theory working? I need it in a BAD way.
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
What I do for my 8125 is activate the BT toggling program and then Mortplayer. I tie the two programs together using MortScript and then activate a playlist through voice command by creating a shortcut into the Programs file.
usng bt headset with htc wizard with fafio crossbow
yes it is capable to do this i have wizard htc running clocking at 286 speed, tomtom mobile 5, with the jabra 2020 bluetooth earpiece all works great gps every single thing to do with sound comes through ear piece even key tapping try this program called btnav you can download it then allocate one of the the buttons to activate it as i do. my normal day using gps system intails switching on earpiece then wizard, pushing allocated button my earpiece beeps then start tomtom all works great then when at work i can listen to audio tracks aswell great little toy hope this helps
zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
BEAUTIFUL THING
Bluetooth Audio
I've downloaded the bluetooth audio to my Samsung Blackjack II and installed it. I have tried several combinations of steps to get the music to play through my headset but I cant get it to work. Do you have any suggestions for me? Is there a specific bluetooth headset I need to get? Or did I just mess something up?
Hey thanks alot for this cab because I've been looking for this cab all over and finally you had the solution to my problem.....
I just installed that cab file and while it seems to function correctly by sending music to the earpiece on the phone, it does not send it to the BT device. The BT device acknowledges when the program is turned on and when it is turned off, but no sound is coming out.
I'm using a Blackjack2 and an Isymphony BT headset/speaker which is not stereo.
I just want to be able to hear my phone on my BT headset/speaker.
Is there some setting I'm missing? Does this program not work? Why for some and not others? Where can I find documentation? Who made that program?
Well, I dont know why you blackjack people are here(this being the Wizard forum and all!), but what I used to use on my Excalibur is the little shareware program called:BTAUDIO(link at bottom of post)
Its shareware in the fact that it only works for 30 minutes at a time, but it does indeed send ALL audio that the phone emits to your bluetooth headset.
Instructions:
1-Install BTAUDIO .cab to your phone
2-Activate your bluetooth headset, and put it in "find" mode
3-Goto your phones comm manager and turn Blueooth on
4-Now pair your headset with your phone
5-Start BTAUDIO
6-Follow the instructions on the screen and BAM, you are done!
I hope that helps!
DOWNLOAD LINK FOR BTAUDIO=
http://www.megaupload.com/?d=9MLLW0MC
Thanks for the reply.
I gave this program a try and it didn't seem to work either. I'm guessing it's a BlackJack problem. That download appeared to be pretty much the same thing as the other link to the "BTaudio" program by Triangle but is limited to 30 minutes, like you said. The first link was not limited to 30 minutes. (so you might want to check that one out)
As for why the Blackjack guys are coming here I'm guessing it's the same reason I found this place. A Google search.
The Blackjack forums don't seem to have any solution other than... "go spend another $75 on a new set of headphones"
Myself, I want to use a BT mono speaker for listening to mono recordings and don't really want a stereo headset.
Thanks for all your help!
THANX for the CAB file
REaly thank you for the cab file works gr8.......................................
Thanks...
This one is very nice. I can't speak for others, but here is what I've learned in a short time....
My personalized ring tones are now coming through the BT, along with the called annoucement. Sorta disorienting, but I like it. I bet if I disable call annoucements, this will fix it. I'll look around..... Thanks for this tweak....
I love it!
thanks
hi this is the first time i am using this site hope it works
I just intalled this cab on a Samsung Ace i325 6.1 (Sprint). I'm using the Jawbone II bluetooth and it works perfectly! Thanks for the cab file.
Hi ,
i really appreciate you cooperation about this issue
i have the same problem but with java platform phone SE w550i) with bluetooth headset
i need a java application that let me hear the music via bluetooth headset (application like msi blue player) in jar format
Can any one help (regarding that my bluetooth headset support a2dp and w550i has no problem with that just need application to stream audio through bluetooth headset)
thanks in advance
my mail is [email protected]
THANX for the CAB file
zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
thank you bro you solved my problem
This application works awesome... Great work
One issue occurred.... The BT Audio is switched ON, i receive a call, i answer/end it. After the call ends, the music is routed back to the phones speaker. I have to switch ON BT Audio again.
Keep up the good work

A2DP cab

I have the cingular 8125 and the plantronics 590a wireless headphones but I can not seem to find the cab file I need to enable A2DP. All I keep finding is ROM upgrades. Any help would be much appreciated.
here you go!
Thank you very much. The cab installed fine but I still can not get the phone to play music files over bluetooth. What am I missing here?
128d what ROM are you running? I believe you must have an AKU 2.0 or above ROM for the a2dp hack to work.
Also, did you soft reset your device after the install?
This is the thread that I used to get a2dp working on my Universal and 8125s (Yes I read the whole thing and you should too because nearly every problem is solved)
http://forum.xda-developers.com/viewtopic.php?t=48502&postdays=0&postorder=asc&start=0
Don't skip a reply, read the whole thing and all the pages. There's another cab file with the registry settings on one of those middle pages that saved me a lot of time and frustration. :wink:
My ROM is 2.25.11.1 WWE
Everytime you want to listen to music you have to go to Bluetooth settings and tap-and-hold where it says Plantronics 590, then choose Stereo headset. Very frustrating and I haven't found a better solution for it. I think the guy behind PhoneAlarm is working on a sollution though.
Dmon said:
Everytime you want to listen to music you have to go to Bluetooth settings and tap-and-hold where it says Plantronics 590, then choose Stereo headset. Very frustrating and I haven't found a better solution for it. I think the guy behind PhoneAlarm is working on a sollution though.
Click to expand...
Click to collapse
i dont have that problem with my HT820.. as soon as i turn on the device and bluetooth on my phone and they sync up i can start playing music in stereo... my settings stay
Unless I've missed something fundamental this must be an issue with the 9100. It seems that it switches between two settings, one for talking and one for music. If you watch a movie you also notice that the audio lags for 2-3 seconds. Obviously this does not happen during conversations.
In one thread on the forum they were discussing creating a little program or applet to activate the headset with just the push of a button. Haven't checked their progress lately though...
Dmon said:
Unless I've missed something fundamental this must be an issue with the 9100. It seems that it switches between two settings, one for talking and one for music. If you watch a movie you also notice that the audio lags for 2-3 seconds. Obviously this does not happen during conversations.
In one thread on the forum they were discussing creating a little program or applet to activate the headset with just the push of a button. Haven't checked their progress lately though...
Click to expand...
Click to collapse
interesting.. my ht820 dont switch profiles between music or talking... it still has the notorious skipping problem when playing mp3's.. but that dont bother me, i only got the headset for phone calls.. im going deaf in my young age from to many loud concerts and a phone call in stereo is very helpful to me
Dmon you trick worked. I can now listen to music with my plantronics. The only problem is the buttons on the headset dont function. Have you had any luck with this?
What player are you using? You have to use, as far as I know, WMP or the newest version of Pocket Player (think it's 2.8) if you want to be able to skip songs and pause etc. I use Pocket Player and I think it's the best player around but unfortunately it's not free. The equalizer is a lot better so you can play with the high registry to remove some of the hissing noices.
8125 A2dp CAB
Installed the cabinet file and it works well in terms of getting the audio to the Jabra BT320S. However, when using the stereo wireless function that it enables, it slows everything else on the phone. Takes 6 to 10 seconds to get the system to recognize any command.
Any suggestions as to what might help speed it up?
My skills are not such that I’m comfortable messing with the ROM (2.25.11.1 WWE)
Thanks for all your work.
Giving this a whirl with my 8125 running Molski 2.26.10.2 Final and Jabra 250.
Holy thread resurrection, Batman!
Here, try these cabs instead. This is the 3.3 stack. Install the cert. before you install the patch.
jwzg said:
Holy thread resurrection, Batman!
Here, try these cabs instead. This is the 3.3 stack. Install the cert. before you install the patch.
Click to expand...
Click to collapse
worked like a charm on my 8125
thx man
..?
Aslo for Wizard ??
mazterjay said:
Aslo for Wizard ??
Click to expand...
Click to collapse
Of course!
!!
Yeah,, U'r right,,, just tested it.. But got a minilag in about every 10-12 secs.. Its a lag of a second.. Each time.. Who know how-to fix this ??
ByTheWay.. I am using a Logitech HS210 ( AKA_ Logitech Mobile Stereo Headset..
Controls are working fine..

Listening Music Via Blutooth.

Hi People,
I have O2 XDA II mini running on Wm2003 SE.my question is that can i listen music thru bluetooth?
1)Which bluethooth device should i have to purchase?
2)Which software should i have to install on my device?
Plzz Help me,
I want bluetooth for both the ears.
Motorola HT820 http://forum.xda-developers.com/showthread.php?t=249219
u will need a A2DP profile for listening music thru bluetooth. u can try the stack but otherwise its not possible in mini to listen music using bluetooth. it jsut doesnt support the profile for bluetooth music transfer.
Hi
OK OK OK OK OK OK OK And jou did not check the link ,no.
Anyone give me a quick walkthrough on how to install the cab file and how to activate headphones.{We're all newbies once}
Paul

Categories

Resources