Database Users

Is there a basic large PHONE pad available ?

Just wondering if there is a very basic phone pad skin available for the M3100...
Just a single line for the number, maybe 2 if the number is too long so the digits don't get too small...
Large buttons for numbers, no video buttons etc just numbers, no need for the TALK/END sort of stuff as the hardware green/red buttons work fine..
Just looking for something that people with wide fingers can use without a stylus....
If there isn't one, what do I need to do to create one ??
Searched the forum but can't really find anything of use on the subject.
Many thanks Phil

I found that the vista theme on Paulya.com worked wonders for this:
http://www.paulya.com/etenskins.htm
http://www.paulya.com/Projects/Eten_Skins/Vista/Vista_Trans/Vista_Trans_Origin.zip
I am tempted to go back to this dialer as it was so good on my Wizard - just lacks a video button.

Hi, Thanks for that.... Managed to get the skin to work that is included with the eten dialer... I also downloaded the eten_ans etc .zip and put it in the windows dir on the phone after extracting it.. can't seem to find how to enable it (am I thick or something... Don't answer that !!)
The only thing I didn't do was use active sync... I copied the extracted file to my memory card then copied them over from that as the PC I'm at, at the moment doesn't run activesync 4 or higher (horrible win98 se machine..
Any comments much appreciated
Phil

I jast ran the cab file from my storage card and it installed perfectly. I did have diffulculty installing additional skins though.

Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.

GavinN said:
Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.
Click to expand...
Click to collapse
Great - Any chance of a screenshot?

Have you guys seen Buzz's Virgy DeepOcean Dialer for WM5 QVGA?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://buzzdev.net/component/option,com_remository/func,fileinfo/id,335/
V

Hi sorry to be thick
ok i downloaded the buzzdev.net qvga dialer
but how does one install it. Do i just run the cab via activesync or run it on the vario2 or what sorry about the stupid questions
also i download the splash screen stuff from there too how do i make that appear instead of the default tmobile one when starting up
thanks
JEREMY

Just stick it onto your device, tap it to load it, install and then when prompted reboot (just hit OK and it'll do it) - the PIN entry screen remains the same, but the main dialer screen changes.
It looks very nice, and I'd use it all the time - except there's no way to use the T9 dialing feature which the regular dialer offers (where you can just type the name of the person you wish to call and it shows all valid entries from the list, so e.g. if I wanted to call my Mum - whose entry is Mum, ironically - I'd type 6-8-6 and then hit Dial). It's quite sad to see that this feature is missing, probably for a good reason as it does cause a fair bit of slowdown on my phone - more than on my old Alpine! - but I still use it all the time and I'm going to have to uninstall the skin because I really neeeeeeeeed that feature. :/

ok if I wanted to get the original tmobile dialer back then all I would have to do is uninstall it then? cool
how would I install the splash screen then?
Jeremy

Vijay55,
I installed it OK, the large buttons are awesome, however I have had the following problems:
1) DTMF (Tones) don't work properley when accessing voice mail etc (UK T-mobile) or any other press x application
2) Jog Dialer not active
3) No Smart dialling
Am I doing anything wrong?
Have had to pull it off becasue of the DTMF problem, I've installed it, removed it, rebooted, changed the options etc, nothing seems to fix it.

Fixed it!!
Though I am now using the Eten dialler with smart dial support and one of Paulya's Dark Blue Glass skins.
Editing the registry and setting the value to 0, then soft reboot and dtmf tones are working.
Setting it to 0 wasn't the obvious choice, and previously I hadn't soft rebooted.
Found the following from dhushy in:
http://forum.xda-developers.com/showthread.php?t=276700
Worked it out. For anyone with a similar problem, use the registry editor to locate the following key:
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x0 0010001,1
Change the value from 1 to a 0 and Bob's yer Uncle (for non-British readers that means everything will be cushty - see Only Fools and Horses for a contextual translation)
Did this and I was able to manipulate my voicemail messages as normal.
Click to expand...
Click to collapse
I am on T-Mobile UK.

skin HTC Touch for Inesoft Address Book

skin HTC Touch (QVGA) for Inesoft Address Book v.1.67 and 1.68b2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.68b2
Unpack Skin in \My Documents\ Start Address Book, in adjustments is tab Skin, press "add"
download http://www.inesoft.com/beta/
v1.67
Rename a folder skin (HTC Touch v01b7) in CIDSkin, put in a folder of installation Address Book, finish work Caller ID. Then again start Caller ID

Thanks,very nice JUVS(e202)
vivi

very nice skin for Inesoft Address Book. keep up the good work

How to
Hi Guys,
Love this great skin. I have installed v1.67 but cannot find the adjustments tab. Am I looking wrong? Or is this option only in v1.68 beta
thanks

hakanos said:
Hi Guys,
Love this great skin. I have installed v1.67 but cannot find the adjustments tab. Am I looking wrong? Or is this option only in v1.68 beta
thanks
Click to expand...
Click to collapse
Rename a folder skin (HTC Touch v01b7) in CIDSkin, put in a folder of installation Address Book, finish work Caller ID. Then again start Caller ID

cool
Thx for this beautiful skin.... i go to buy adresse book !!!
hehe

Looks good JUVS..
I would just rotate the hang-up botton so it looks like its hung-up, or maybe change the color to red or something.. just a suggestion..

ggggggg great
thx man... hope you give some more power on skinning other apps. vey nice. wisbar skin in touch style would be great.

Hey!
I'm new around here, I love this skin and I'm using it atm, thanks
The only problem i had with it was that the red button isn't red, so i made another version of those bmp's, i hope you don't mind.
Maybe someone else will find them useful as well.
View attachment btn_red_down.bmpView attachment btn_red_up.BMP
---
Ruxandra

Great skin JUVS!
When i have a private or a unknown call come in the default 'unknown' and 'private' pictures you have in your skin pack don't come up. Is there something special I have to enable to have this work?
All I get is a the phone number of incoming call, no photo.
Otherwise great work mate! ;p

lampllight said:
Great skin JUVS!
When i have a private or a unknown call come in the default 'unknown' and 'private' pictures you have in your skin pack don't come up. Is there something special I have to enable to have this work?
All I get is a the phone number of incoming call, no photo.
Otherwise great work mate! ;p
Click to expand...
Click to collapse
unknown call - as i understand, it is suppressed number that is if number is not defined at all (It is not certain).
p.s.. And in general it is a question to developers)) I only did on a curve)))

rux_denis_acc said:
Hey!
I'm new around here, I love this skin and I'm using it atm, thanks
The only problem i had with it was that the red button isn't red, so i made another version of those bmp's, i hope you don't mind.
Maybe someone else will find them useful as well.
View attachment 45009View attachment 45010
---
Ruxandra
Click to expand...
Click to collapse
I did a theme in style Touch and red there was not entered, on it I avoided these colors))

Can you please explain more ?
Very very beautiful skin.
But I have tried a whole day I cannot install it.
The version I am using is V.167
I installed it on my card.
So on my card there is a folder call inesoft address book. So that what I need to do is to put the file inside it ?

Thanks,very nice

I cannot install it. Can you please explain more ? Step by step? Because to many files to download. And I don't know which one the first file to install....Please...please...please...

duckandchris said:
Very very beautiful skin.
But I have tried a whole day I cannot install it.
The version I am using is V.167
I installed it on my card.
So on my card there is a folder call inesoft address book. So that what I need to do is to put the file inside it ?
Click to expand...
Click to collapse
To install a skin on your mobile device, create CIDSkin folder in Address Book installation folder, and copy skin.ini and all BMP pictures to. Restart for the changes to take effect.

Change "Incoming Call Screen" ??

How can I change the "Incoming" call screen? Because the standard looks ugly... und it's hard to use with the fingers...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm totally agree with you, I use Pointui and all the interface is made for finger navigation, but when there's an incoming call it looks ugly like you said, it doesn't fit with Pointui. Surprising that nobody thought about It.

Use S2U2

doesn't work ... already posted in the thread...

I would also really like to be able to change the incoming call notification. A big nice answer / reject screen that covers the whole of the screen would have been really nice.
When you think about it - it's quite a basic skinning request.
Then again - [email protected]#$soft is real rubbish and they can miss the most obvious things in everything they do.

no one skins that because everone uses s2u2 !
here is more softwar (not freeware): http://forum.xda-developers.com/showthread.php?p=1978809

Get a Diamond Comes with a nice big button call screen.

There are a lot of programs with big and nice call screens. U could try InesoftAddressBook. Its also a contact app.

dzign-it said:
Get a Diamond Comes with a nice big button call screen.
Click to expand...
Click to collapse
that is a good concept, can any developer design that caller notification for qvga devices????

Is there a solution that doesn't require me to change anything else, only the incoming call screen?
S2U2 is nice, but I don't want the app to be my main page, I don't need the lock feature, want to keep my device as it is, only have a nicer and bigger incoming call screen.
InesoftAddressBook: same problem. I don't want to change my contacts manager...

You can disable the Lock part of S2U2, and leave it as just a CID program...

i made this one for the inesoft caller id.

If anyone can work out how to disable the default CID screen, I can make a replacement. (In fact, I have a replacement, it just gets interupted...)

l3v5y said:
If anyone can work out how to disable the default CID screen, I can make a replacement. (In fact, I have a replacement, it just gets interupted...)
Click to expand...
Click to collapse
That would be great if you can do that. I've been looking for years to find a small app just to do a full screen CID...

l3v5y said:
If anyone can work out how to disable the default CID screen, I can make a replacement. (In fact, I have a replacement, it just gets interupted...)
Click to expand...
Click to collapse
I was working on a CID too and I need to check if I was able to surpress it. I stopped working on this a long time ago.

it wud be great if some one can find the same...
i use iFonz application...it comes along with fulscreen CID with photo..(S2U2 only)

Mikulec said:
There are a lot of programs with big and nice call screens. U could try InesoftAddressBook. Its also a contact app.
Click to expand...
Click to collapse
+1 With inesoft AdressBook, you'll change your incoming call interface.
Try it and you'll keep it.

Inesoft Address Book skins the dialer with an easy to use finger-friendly incoming call screen.

My current idea is a small piece of software that's memory resident, and pops up when it gets notified of an incoming call.
Using the .NET CF, that part's not hard, and the pick up/reject is easy to do via virtual keystrokes, but so far, I haven't found a way to stop WM showing it's own CID screen...
The main reason I have for this is for FSD (my dialer), but if it can be done, I'll release a stand alone CID program.

kramerica2 said:
Is there a solution that doesn't require me to change anything else, only the incoming call screen?
S2U2 is nice, but I don't want the app to be my main page, I don't need the lock feature, want to keep my device as it is, only have a nicer and bigger incoming call screen.
InesoftAddressBook: same problem. I don't want to change my contacts manager...
Click to expand...
Click to collapse
S2U2 will not be your main page. If you choose not to lock your device in S2U2 settings then only time you'll ever see it is when someone calls you.

[Come on!] Develope a photodial today plugin! Please!

Hi there.
I ahve tried many different soulutions to get a todayplugin working on UL or else that can:
- use photos from Outlook contacts
- speeddial with single tap
- choose sms, call, email
- easy apllying contacts
I only found:
- makecall.exe = difficult to customize and need of own made icons
- vjphone = also difficult to customize
- dialtab.cab = floating arround - seems to be part of SPB Mobile shell - very easy! great! BUT not freeware. shows "trial expired"
So how difficult can it be for some of you guys out here to create a plugin that works 100% ???
Hope someone will join this project. I WILL try everything. But i´m not a programmer!
THANKS for helping!

Hi papmopps, have you tried face contacts? There is a free demo: http://www.cnetx.com/products/contact/

uniqueboy said:
Hi papmopps, have you tried face contacts? There is a free demo: http://www.cnetx.com/products/contact/
Click to expand...
Click to collapse
yeah. that´s the problem. i is not freeware
I´m searching for cooking into my rom!

I have the spb trial version too and I noticed that if u remove the program and reinstall it, it'll keep startn over

ludarip said:
I have the spb trial version too and I noticed that if u remove the program and reinstall it, it'll keep startn over
Click to expand...
Click to collapse
i don´t have it installed. it is cooked in... and not the complete one. BUT only a selfmade cab for ONLY the photodialpart on today.

New App Should Be Made
While I like and use the Face Contacts photo dial, I think thats the name, I too think a new app should be created. When the Diamond came out, it opened up a whole new level to today plugs for us WM users. The functionality of the photo dialer plug on that device is leaps ahead of other software. Its functional, and by god its beautiful.
I cant wait to see these plugs start getting ported over for our devices. Until then , I hope one of you geni's on here make something to hold us over. Actually, knowing how most of you all operate, you'll make something that puts the Diamonds Contact Plug to shame!!!

this is what you need!
testtodayplugin.cab
from a theme by who i cant remember, or somewhere else, sorry cant remember ..
[EDIT] from this http://forum.xda-developers.com/showthread.php?t=371049

papamopps said:
Hi there.
I ahve tried many different soulutions to get a todayplugin working on UL or else that can:
- use photos from Outlook contacts
- speeddial with single tap
- choose sms, call, email
- easy apllying contacts
I only found:
- makecall.exe = difficult to customize and need of own made icons
- vjphone = also difficult to customize
- dialtab.cab = floating arround - seems to be part of SPB Mobile shell - very easy! great! BUT not freeware. shows "trial expired"
So how difficult can it be for some of you guys out here to create a plugin that works 100% ???
Hope someone will join this project. I WILL try everything. But i´m not a programmer!
THANKS for helping!
Click to expand...
Click to collapse
don´t know if that´s what your looking for, give it a try. i don´t use it, so i can´t say if you can choose email/sms, but photos work.
steph

variosteph said:
don´t know if that´s what your looking for, give it a try. i don´t use it, so i can´t say if you can choose email/sms, but photos work.
steph
Click to expand...
Click to collapse
http://www.freewarepocketpc.net/ppc-download-photodialer-today-plug-in.html

badaas said:
this is what you need!
testtodayplugin.cab
from a theme by who i cant remember, or somewhere else, sorry cant remember ..
[EDIT] from this http://forum.xda-developers.com/showthread.php?t=371049
Click to expand...
Click to collapse
just found out the one i linked to was originally by TofClock, known as TofClock Today Plugin, i think he passed on reading some posts so RIP, peace.

The "testtoday" would be the best one, but you may know that there were complaints from Palm about this being posted!! At least that's if my memory serves me correct.

TheChampJT said:
The "testtoday" would be the best one, but you may know that there were complaints from Palm about this being posted!! At least that's if my memory serves me correct.
Click to expand...
Click to collapse
sorry didn't know that it is the same one posted in the freeware link here as well, my bad, apologies.
will remove my links if fuss is made

You can use RLtoday with a little help from the VJDialer:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://rotlaus-software.de/forum/viewtopic.php?id=1190
use a png for each picture and change the phone number in the skin file, thats all. You can also remove the clock.
Download (33kb): http://rapidshare.de/files/38410792/Callers.zip.html

twolf said:
use a png for each picture and change the phone number in the skin file, thats all. You can also remove the clock.
Download (33kb): http://rapidshare.de/files/38410792/Callers.zip.html
Click to expand...
Click to collapse
sorry BUT didn´t i said in first post that i DO NOT wnat to create own icons like on UL and VJdialer????
It shall take outlook pics!!!

Sorry, I understood that you didnt wanted to make icons, not images.
Its not the same to me, jpg/png/gif is not .ico
I did tried severall programs like that, but none freeware.

twolf said:
Sorry, I understood that you didnt wanted to make icons, not images.
Its not the same to me, jpg/png/gif is not .ico
I did tried severall programs like that, but none freeware.
Click to expand...
Click to collapse
that´s teh problem. but it should be so difficult to create such an app for a developer!

well, rltoday can read registry values, if the contact list is somehow linked there inside, you should be able to make some sord of tool...

papamopps said:
Hi there.
I ahve tried many different soulutions to get a todayplugin working on UL or else that can:
- use photos from Outlook contacts
- speeddial with single tap
- choose sms, call, email
- easy apllying contacts
I only found:
- makecall.exe = difficult to customize and need of own made icons
- vjphone = also difficult to customize
- dialtab.cab = floating arround - seems to be part of SPB Mobile shell - very easy! great! BUT not freeware. shows "trial expired"
So how difficult can it be for some of you guys out here to create a plugin that works 100% ???
Hope someone will join this project. I WILL try everything. But i´m not a programmer!
THANKS for helping!
Click to expand...
Click to collapse
I was also searching for this kind of software for a long time. I would say, I tried everythig.
Till now the best solution was htc home and the cube, they act just how i would suppose and like it.
I would like to add something to this request: make it flexible, so you can specify something like x rows and y columns on your screen, I don't like those one-line plugins.
For the meanwhile I would really really love to see a tool to convert contact-pictures to icos.

Hey,
I second this request!
Will pay a good donation for a good quality plug-in.
Requirements:
1. Adjustable contact grid eg. 3x3, 4x4, 5x5
2. Photos pulled from outlook database.
3. Skinable.
4. Low memory footprint.
Pleeeeeeze!

Or This?
I saw this one posted earlier today.
http://solsie.com/2008/11/elecont-dialer-for-windows-mobile-released/
It's not freeware, but $6.95 isn't bad.

iCaller 0.1.0.3 alpha Xperia Style

Hey guys,
I hate the tiny Windows Mobile standard screen for "incoming call", so I looked for a program who shows me incoming calls with a bigger screen.
I found "icaller", but the program didn't work on my Xperia, the caller information and the picture were not at the middle of the screen.
So i fixed the problem and modified the program a bit.
Fixed the position problem
Made the font bigger
Put caller information on the top
Xperia style screen when contacts without pictures call you
SU2U (ipod style) background for calling information
The features of the program are the same like in the non-edit version.
Click here to go to the orignal thread of the program and here to go to the developer's side.
I just edit the style, so i can't help you if you have problems with iCaller. If you have, please ask the developer.
It looks like this when sombody calls you (plus the taskbar):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I uploaded a german (just working on german Windows Mobile!) and an english version. I didn't test the english version on my Xperia, so if the english version doesn't work, tell me and I will try to fix the problem. Don't forget to take a look at the readme and the settings!
As far as I know there are problems if you use iCaller and CallerID at the same time, so please turn off CallerID when you use this program.
I hope you like it!!
Enjoy!

Could you provide a screen shot?

It look's like on the picture I posted.
Does it work so far on english Xperia?

Lets Try...

very nice one thumbs up

If you want I can post two alternative backgrounds tomorrow.
TF3D style:
Xperia style 2:

The Touch HD dialer has a full screen incoming call screen too, it looks pretty good .

dekeijzer said:
The Touch HD dialer has a full screen incoming call screen too, it looks pretty good .
Click to expand...
Click to collapse
I didn't know that , but i don't like the Touch HD Dialer anyway.
Is the incoming call screen included in the normal Touch HD Dialer cab?

F-Styla said:
If you want I can post two alternative backgrounds tomorrow.
TF3D style:
Xperia style 2:
Click to expand...
Click to collapse
I'd like the first one, can you upload it please?
Oh, and is it still not compatible with TF3D?

Aerodeath said:
I'd like the first one, can you upload it please?
Oh, and is it still not compatible with TF3D?
Click to expand...
Click to collapse
Ok I will upload it tomorrow
This program is compatible with TF3D (cab version), I tested it! No matter which style you use. I don't know if it's compatible with the rom version, because I don't use it.
@ user with english Xperia phones: does the program work phone?

Locked phone
Hi,
I've noticed that Icaller doesn't work when Xperia is locked.
Have anyone had simillar issue and know the solution ?

i had the same problem. it wouldnt let me answer the phone calls, just lets me reject them.
The solution is to uninstall it.
Thats it...

It works for me in an unbranded, Dutch Xperia (after some tweaking to make it understand Dutch )
Only, for some reason the screen does not look like the screendump you posted. Instead, the Caller ID picture (or the background if there isn't one), goes all the way to the top of the screen, and the Caller ID text runs through it. I managed to help that by changing the html file a bit.
Now I'm trying to get the Caller ID picture to be either screen-wide or non-repetetive, but so far, no luck. I created a picture that has exactly the same size as the provided "NoCallerPicture.png", but that doesn't make a difference.
It seems there is in fact a difference between using that, or using a picture coming from the phone :-( Any ideas on how I can make it just the on picture showing?

Hey there, thanks for the work.. but the link doesn't point to the iCaller app, but rather to a file called attachement.php.. I tried with different browsers, same results. would u please post a different location for the file.. thanks

Qinx said:
It works for me in an unbranded, Dutch Xperia (after some tweaking to make it understand Dutch )
Only, for some reason the screen does not look like the screendump you posted. Instead, the Caller ID picture (or the background if there isn't one), goes all the way to the top of the screen, and the Caller ID text runs through it. I managed to help that by changing the html file a bit.
Now I'm trying to get the Caller ID picture to be either screen-wide or non-repetetive, but so far, no luck. I created a picture that has exactly the same size as the provided "NoCallerPicture.png", but that doesn't make a difference.
It seems there is in fact a difference between using that, or using a picture coming from the phone :-( Any ideas on how I can make it just the on picture showing?
Click to expand...
Click to collapse
Be care that the caller picture stored by outlook in the agenda is reduce in size so you need to create a folder named "caller picture" with pictures inside named by phone number. In this way, Icaller will open first the good resolution picture intead of the reduce one from outlook.

X1_Kemist said:
Hey there, thanks for the work.. but the link doesn't point to the iCaller app, but rather to a file called attachement.php.. I tried with different browsers, same results. would u please post a different location for the file.. thanks
Click to expand...
Click to collapse
What do you mean?
The download link on the first page?
It works for me.
@Others
Sry that I didn't answer in this thread, but I am right in my school leaving examination, I am done on Thursday ^^

where there is a picture, there is the truth.

popup incoming call
hi!
how can i disable the WM "incoming call" popup bubble, when i have an incoming call? thx A.

so does this mean if i add a picture for my contact does it display a full screen sized pic of them like the iphone does?

as_x1 said:
hi!
how can i disable the WM "incoming call" popup bubble, when i have an incoming call? thx A.
Click to expand...
Click to collapse
I have the same question ...
Regards,
Stamba