I have jasjar with latest rom from imate.
I have two major problem with my operator: TIM
1. follwing all the instructions about MMS on the TIM website I still get an error, receiving and sending MMS
2. changing the pin, I get "unknown sim error". I tried with two different sim, an old 32kB and a new one 128kB.
Any other italian reader with kaskar and TIM?
thanks
Rosario
Hi, I'm Italian and I get it working.
You need to:
1) set a new connection (I put it in My Work Connection): name timMMS,select a modem:Cellular Line (GPRS,3G),Access Point name: mms.tim.it
2) go to mms configuration (it's in the menu in the messaging centre), and you put the data you can find here: www.i.tim.it/file/0,,774,00.pdf
So server name TIM_mms (or whatsoever), gateway 213.230.130.89, port number 9201, server address http://mms.tim.it/servlets/mms
connect via Work, and IMPORTANT: choose Wap version WAP 1.2, not 2.0 or it doesn't work
Ciao
I configured it in this way too. But no luck, I still get an error after 30 secs sending messages, or retriving it.
Very strange, same sim, same parameters but different phone and everything works great.
I don't understand why in some jasjar they work and in others they don't.
Do you get an error when you try to change the pin code to you sim?
thanks
ciao
anyone of you got the MobileTV working ... which are the RTSP addresses ?
rpingar, I disabled the pin code.
Maybe you should try this (I haven't a clue, but...)
Please pay attention to put it in WAP mode 1.2
anyone know with file cab for install MMS seting please help. I use file cab from i mate jasjar but not use. When i change this only have text message outlook and hotmail doesn't have MMS this only have mms configuration.
Hi
I had mms working on my imate jasjam but now it is gone from the pda completely, and I am unable to get it back has any one got a telstra mms cab that i can load onto it to fix the problem??? I have also tried the I-Mate JasJam 1.31.305.103 ExtROM - Telstra Australia Specific. This did not fix the problem
Hello I recently flashed with WM2003 and have been looking for the Arcsoft MMS application, many that I have tried to download and installed said that its not a valid windows CE file.
Does anybody have a link to an Arcsoft MMS Composer that I can try?
Thanks,
Kidcash
I found this one : http://forum.xda-developers.com/showthread.php?t=225853&highlight=arcsoft+mms
It is version 1.6.0.14, I believe now version 5 is out?, looks like I got a very old verison, but at least it works, the others gave a "this is not a valid windows ce install file" error.
if they were exe files then it that error is typical
user trying to run a pc activesync install file directly from their pda
install files to be run on pda's are in 99% of cases cab and not exe
Hi all experts.
I have a MMS-send/receive problem on my T5358+ phone.
I have installed Arcsoft 5.2.2.22 and put in all the required settings for MMS-server ect. It's running WM6.5, .NET ver. 3.7.
When I try to send a MMS, the phone connects to the GPRS-network through the created MMS-connection (Celluar GPRS and MMS-APN name) and then immidiatly disconnects.
The phone can use the normal GPRS connection (Celluar GPRS and internet-APN name) for surfing the net, updating weather ect. It works OK.
The problem only accurs on the MMS-connection.
I know the settings for the MMS-connection is OK.
I have the same settings on another WM6.1 phone with arcsoft 4.8, and it's working OK.
If I set MMS-retries to 3, the first try disconnects. The next try does not disconnect, but no data is sent. the last try dis-connects.
Can you help me in the right direction to find the error ??
THX in advance.
Regards
Sthh
Hi all
Found the solution.
I had run into the WAP-bug.
It's all explained here:
http://forum.xda-developers.com/showpost.php?p=3815864&postcount=218
I haven't searched enough in the forum before I posted. Sorry.
Stha