Related
I can't get TTN5 to pick up my BT GPS. I think the problem is that I can only seem to be able to assign COM0, COM8 or COM4 in the BT settings dialogue.
TTN5 need 6 or 7 IIRC.
Even though the BT COM ports dialogue allows me to select any COM from 0 to 9. It complains about not being able to create the port if I select anything other than 0, 8 or 4.
Any ideas?
I am having the same issue connecting with my GPS and Destinator 3 s/w.
Try pairing the GPS with your device before loading tomtom, and assign COM0. That's what I did and tomtom picked up the device immediately without problems.
Having said that my GPS is a tomtom.
Can't install TT5... any suggestion?
I get an error and than installation quits...
you have to connect through COM5. At least it works for me.
Strange enough, now Tomtom doesn't show this port anymore, so they day they unpair, I'm screwed.
I have the same problem. I can only select com 0, 4 or 8 and none of these ports show up in TT5. I am unable to make it work. I even tried ti activate the GPS control panel (http://forum.xda-developers.com/viewtopic.php?p=154825#154825) but it seems this control panel does actually not work (probably why it was hidden in the first place).
Any suggestions to make TT5 work are very welcome.
Some how (no idea how), TT5 was working with the GPS. Yeterday I had to hard reset due to several reasons, I now, again, I cannot manage to connect the damn bluetooth GPS.
Same reason as always: NO COM5 in TT5.
Damn!
Guys now I am really stuck! I have been messing about with the registry, this is what i have found; COM6 friendly name is RIL (radio something or another I think basically the phone etc…) I have changed that to another port (HKLM\Drivers\BuilIn\Serial….) changing the index to another port i.e. a free one like 0/4/8 upon reboot allows me to map port 6 to BT gps under MSBT stack; however the phone (radio) stops functioning although BT serial port has been assigned to 6 TT5 still does not start the connection! Looking through the reg under HKLM\Drivers\BuiltIn\serial_BTUR this is the default BT serial port; this is set to port 7 (Index) if you change that port to something other than 7 reboot BT stops working. I have loaded the old TT3.7 GPS driver/software (Not complete TT3 just the gps update) and I can connect and communicate with the BT GPS. The BT GPS is seen as BT GPS. I can leave it connected however as soon as I fire up TT5 still no GPS communication. Tried to get TT5 working for over a week and have still failed. I think we need to find how TT5 detects available ports and edit/hack that area. There is on thing I have noticed though; if I select TomTom GPS there appears to be some BT communication although no thing on the GPS screen the BT light on my GPS unit (Fortuna) flickers periodically. Seriously stuck any help greatly appreciated as I am currently running out of ideas…..
Guys now I am really stuck! I have been messing about with the registry, this is what i have found; COM6 friendly name is RIL (radio something or another I think basically the phone etc…) I have changed that to another port (HKLM\Drivers\BuilIn\Serial….) changing the index to another port i.e. a free one like 0/4/8 upon reboot allows me to map port 6 to BT gps under MSBT stack; however the phone (radio) stops functioning although BT serial port has been assigned to 6 TT5 still does not start the connection! Looking through the reg under HKLM\Drivers\BuiltIn\serial_BTUR this is the default BT serial port; this is set to port 7 (Index) if you change that port to something other than 7 reboot BT stops working. I have loaded the old TT3.7 GPS driver/software (Not complete TT3 just the gps update) and I can connect and communicate with the BT GPS. The BT GPS is seen as BT GPS. I can leave it connected however as soon as I fire up TT5 still no GPS communication. Tried to get TT5 working for over a week and have still failed. I think we need to find how TT5 detects available ports and edit/hack that area. There is on thing I have noticed though; if I select TomTom GPS there appears to be some BT communication although no thing on the GPS screen the BT light on my GPS unit (Fortuna) flickers periodically. Seriously stuck any help greatly appreciated as I am currently running out of ideas….. I Think there is only one Man that maybe able to help; ITSME help please!
I've completely given up. I've spent most of the day hacking the registry to COM5, with multiple combinations on the GPS control panel, etc... with no success.
I've hard reseted the device and I won't install TT5 until someone figures out how to connect it to a Bluetooth GPS.
I can't believe such a new device hasn't sorted out a simple connection to a Bluetooth GPS.
Well... not yet.
I've been able to set up TT5 working with my old Bluetooth GPS, but it doesn't work with my new Syson Blue Sirf III. Have no idea why, maybe someone can lighten me up.
Anyway, this is what I've done for non SIRF III and it works for me.
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Hope it works for everybody.
Now, how to make it work in SIRF III - no idea. I've made the same process with the Sirf III GPS and it doesn't connect.
Success!!!!
You sir, are a genius.
I salute you.
I've got a Fortuna Clip on and it sucks
They had to screw us again with the BT stack. Morons. It is abslutely impossible to set this baby up with TT5. I got TT5 to work on the Magician, and the XDA 2, but this, abosulutely beats me. It seems Tomtom barely let's me choose any ports...lost
Top Man andreuroig
Thanks andreuroig your a top mman Just got it working on Fortuna Clipon BT GPS; Can I pick your brains about maybe trying to install the WIDCOM BT stack on the universal; have tried manually hacking away at this; but have given up now....
mikeycollins13
hi mikeycollins13 wrote
It is abslutely impossible to set this baby up with TT5. I got TT5 to work on the Magician, and the XDA 2, but this, abosulutely beats me. It seems Tomtom barely let's me choose any ports...lost.
I agree Have tried andreuroig way, I can´t get a com0 in tomtom ,
Please help.
:?
MIracle, got it to work. Clip on + tt 5.1
This how I did it:
1.) IN BT settings, (After having paired and chosen 'Serial', went to COM ports and selected 0
2.) Then, from inside tt5, went to gps...picked the 'other BT', it ehn showed IR ports, serial cable etc, Port 7 (no use, couldn't do much) and THEN Com port 0. Clicked that and it worked.
Done
PM if you need help
slight subject change, but.... JasJar, Tomtom 5.1.......slight twist
possible to have the 100mb GB map stored on the phone, so to use a SD GPS Card?, Due to the new memory layout of the phone this could be an issue.
I have that and TTN3 was ok with the 32mb map in, but since 5.1 you cant have smaller than GB 105mb, so im stuck on TTN3 for SD GPS unit and TTN5 for the, err not yet purchased BT GPS unit,
Some sort of map cutter would be nice,
Ive ordered my Jasjar but waiting for the post,
What i really what to know is, do i put the SD GPS unit on ebay now and recoupe some losses having to get a bluetooth unit or not ????
TiA
Jasjar, BT GPS and TT V5.1
Some people here state that they installed TT V5.1. Actually V5.1 is an upgrade that can be downloaded from the TT support site. It requires V5 as a basis. BUT the V5.1 only comes in EXE format (no CAB fiile) so I wonder how you guys were able to get 5.1 installed as the setup program crashes as soon as it connects to Activesync 4.0 or 4.1.
?
you have to copy the 5.0 cab files across, then run them and it installs that way,
then just the 5.1 ugrade to copy across
faisal.husain: no idea about how to install de Widcom BT. That is out of my league.
JoseF:
Start from zero. Erase your bond with your GPS. Start TT5 and select any port that you have free (COM7 or even Serial on COM1).
Pair your GPS and follow the steps I've mentioned. It should work, but only, if it's not a non SIRF III gps.
Hi, I'm hoping to get the new Windows Mobile 5 device dubbed the HTC Universal, AKA o2 xda Exec.
TomTom tell me TomTom Navigator 5 is NOT compatible with it.
www.mobilefun.co.uk state that it is compatible.
Some people on forums say they have 5.1 working with the device.
Other people state the Bluetooth won't lock in.
Does anyone here know the truth?
Yes it will work
It works. I use TT 5.1 about every day (via a bluetooth receiver). Here's the instructions to install the program.
http://www.pocketgps.co.uk/modules.php?name=Forums&file=viewtopic&t=28171&highlight=
Go about half way down.
To install your BT GPS receiver. First pair the device. Then add a new COM Port under the Bluetooth settings. You want to add an OUTGOING port. I usually specify it as COM0. Then start up TT5, go into GPS configuration, selct "Other BT Receiver", then select COM0 from the menu. TOMTOM will automatically start up BT (it doesn't have to on before you launch the program), find the already paired receiver and start communicating with (give it some time though. the whole process takes about 30 seconds to a minute).
Hope this helps.
Cool, thanks!
And finally... I assume the Universal can support 2 simultaneous bluetooth connections? E.g. can I use TomTom with the bluetooth GPS at the same time as speaking on a bluetooth car kit?
To keep things simple
Tomtom 5.0 does NOT work with the Universal. Tomtom 5.1 Does. Hpoe this helps
Received my T-Mobile UK MDA PRO today. I can confirm that TomTom 5.1 DOES work great on it with any bluetooth GPS device, although it was a few hours before I stumbled upon a thread in this forum which had instructions on how to get it working
jasjar works fine with tt5.1 and can connect at same time with gps,headset and many bluetooth devices
Re: To keep things simple
mikeycollins13 said:
Tomtom 5.0 does NOT work with the Universal. Tomtom 5.1 Does. Hpoe this helps
Click to expand...
Click to collapse
Yes it does. I have 5.0 running on my JASJAR now. Haven't upgraded to 5.1 yet in case it breaks something.
just replace the tomtom navigator.exe with the 5.1 version, all done.
How on earth did you manage to get TT5.0 to work?
I have tried everything (all the above tricka and then some) and cannot get the right com port to show up from within Tomtom? Can you tell me step by step?
How on earth did you manage to get TT5.0 to work?
I have tried everything (all the above tricka and then some) and cannot get the right com port to show up from within Tomtom? Can you tell me step by step?
Re: How on earth did you manage to get TT5.0 to work?
mikeycollins13 said:
I have tried everything (all the above tricka and then some) and cannot get the right com port to show up from within Tomtom? Can you tell me step by step?
Click to expand...
Click to collapse
It does work, if you follow the guide in this thread exactly:
http://forum.xda-developers.com/viewtopic.php?t=28386
However, I had to use COM4 instead of COM0.
I also had a problem where I connected everything to the right COM port, could see TomTom accessing the GPS device by the LEDs, but still "no GPS device found!" - it seems TomTom likes your GPS device better if it's actually locked onto a signal (so go outside!), give all this a try
...talking of TTN5....
Has anyone had any success getting TT working with the Wired GPS mouse? Is there a way to connect it to the Exec...?(mini USB to serial connector?)
If the 2 can be physically connected, does the software see it/connect up properly?
TIA
cheers
Paul
FYI, I emailed TOMTOM about the installer crashing, and guess what they said. "TOMTOM 5 is not supported on the IMATE JasJar."
What a load of cobblers. It works perfectly well if you install it using the cab files. TOMTOM support is the biggest load of s**t I have ever come across.
JJ works fine with the following:
1) Navigon MN 5
2) TT 5.1
3) OnCourse Navigator
4) iGuidance
These have been tried and tested.
Just cause it's not supported it doesn't mean they don't think it'll work. it just means that they won't help you fix it if it goes wrong becuase they have not tested on that platform. always worth a try regardless of what the vendor or devlopers say!
Another MDA Pro with TT5
I just got an MDA Pro a couple of weeks ago, and being the fool I am, bought a copy of Tom Tom 5 from Fleabay (doh!).
On receipt, I could not get the software to load from my PC, and when trying to copy over the cab files manually, the ttn.cab file will not load on the PDA. On closer inspection, this has got something to do with 'Bekonl' so appers I have wasted some money on cracked software that does not work.
Is this right? Or if I can obtain an alternative ttn.cab file, will it load, if so will it be locked? I was just looking for a reasonable low priced SatNav solution - but this is proving to be harder than I thought!
For those of you coming from a WM2003 device you can simply install TomTom on a memory card on that. Take the memory card out and put in Universal. It works. That's it.
I am not unfortunately. I am coming from a Mk1 paper diary, a £3.99 map from the petrol station, and a bullet proof Nokia 6310i!
All help gratefully received though.
Tuscan said:
I am not unfortunately. I am coming from a Mk1 paper diary, a £3.99 map from the petrol station, and a bullet proof Nokia 6310i!
All help gratefully received though.
Click to expand...
Click to collapse
If the ttn cab fails to install try this;
uninstall all tomtom entries from remove programs.
Remove sd card from device
install gps.cab
soft reset (this is the important bit)
install ttn.cab
JJ
JJ works fine with Oziexplorer, Tomtom5x
:wink:
im having a nightmare!!! after reading through hundreds of forums to get tomtom 5 on the xda mini s i finally manged to install tomtom 5.21 on my device but now i have a problem, a couple of forums advised to just install 5.21 not version 5 (not compatible with wm5). 5.21 installs perfectly, i have all the maps and voices, but now as i have obtained the tomtom 5.21 update when i get past the voice section it tells me to enter a product code, i only have a copy of tomtom 5 so i havent got a product code. is there anyway round this????? ive tried a crack 5.21 but it just tells me when i try to install it on my device "tomtom failed to start"
anyone got any step by step suggestions its driving me crazy!!!!
straffs said:
im having a nightmare!!! after reading through hundreds of forums to get tomtom 5 on the xda mini s i finally manged to install tomtom 5.21 on my device but now i have a problem, a couple of forums advised to just install 5.21 not version 5 (not compatible with wm5). 5.21 installs perfectly, i have all the maps and voices, but now as i have obtained the tomtom 5.21 update when i get past the voice section it tells me to enter a product code, i only have a copy of tomtom 5 so i havent got a product code. is there anyway round this????? ive tried a crack 5.21 but it just tells me when i try to install it on my device "tomtom failed to start"
anyone got any step by step suggestions its driving me crazy!!!!
Click to expand...
Click to collapse
I do not think you will find a hack for this at the moment...
Just use your original product code, but that is just a beginning of nightmares. Bluetooth does not work with GPS devices. That is a present from Microsoft. You would think with new version compatibility would improve. Well, let's just wait for M-soft updates.
@peralex:
That's complete nonsense!
You just need to pair the wizard with the gps, assign a new outgoing port (COM6 by default) DO NOT CHECK THE SECURE CONNECTION CHECKBOX!
Turn off the wizard, turn it on, now start TTN5.21 WITHOUT manually enabling BT. (TTN enables it for you) Then select 'other BT GPS' on COM6 and voila, wait for a fix and navigate away.
@Topicstarter
Your TTN5 product key should work with 5.21.
well thats the thing i need a crack so i dont have to enter a product code, because the ttn5 is a copy i dont have a product code!
Wow, I did not know that you have to go through the whole voodoo ritual to enable simple GPS, but thanks, I will try it.
peralex said:
Wow, I did not know that you have to go through the whole voodoo ritual to enable simple GPS, but thanks, I will try it.
Click to expand...
Click to collapse
Remember to stick a needle in your styrofoam dummy gps receiver before switching the real thing on!
By word simple I did not mean "styrofoam" and from respect to this forum I am not going into BS with you MoFo.
I've been using the Atom since early Jan and TomTom 5.21 is the program thats not working, it's also a program that I really badly need.
But I am having big problems trying to get it to work
I've got a crack version and it installs fine but when it comes to selecting a voice.. it always freezes and goes no further.
I've been trying for days and nights but i'm getting nowhere
Can someone please help or advise me!!
Many thanks.
peralex said:
By word simple I did not mean "styrofoam" and from respect to this forum I am not going into BS with you MoFo.
Click to expand...
Click to collapse
Dude, keep your shirt on. Try reading a post for a change before losing the temper and you would have noticed the trailing smiley in my post.
Invisible Sense said:
I've been using the Atom since early Jan and TomTom 5.21 is the program thats not working, it's also a program that I really badly need.
But I am having big problems trying to get it to work
I've got a crack version and it installs fine but when it comes to selecting a voice.. it always freezes and goes no further.
I've been trying for days and nights but i'm getting nowhere
Can someone please help or advise me!!
Many thanks.
Click to expand...
Click to collapse
Writing a little step by step guide for a working TTN 5.21 installation, I'll post it in about 3 or 4 hours, I'm at work now... I'll try and answer all PM's as well by then.
TTN 5.21 on wizard (originally SD install of 5.0):
- Insert Memorycard into PPC and ,in case of WM5, cancel installation.
- Connect PPC to PC and run the 5.21 update (available on tomtom.com)
- When installed, activate (or "activate" :wink: )
Use GPS instruction above and navigate away. Easy, isn't it?
If it's not working, post it, I'll see if I can help.[/b]
i installed tomtom 5.21 on sd card, then start the 4 (i think) cab files from folder 2577, place then on device. you will have to do a reset with one of the files, it tells u when. then goto programs and run tomtom. thats it. been working all day no probs, just need a phone that works now.?
dont forget the blue tooth peairing, like u have been told above.
there are many guides on TTN5 on WM5 on this forum, i have read & added to some of them.
* 5.21 IS Version 5, so your version 5 key should work fine
* Bluetooth should be paired, open a port, then add in TTN as "other BT GPS on port XX"
* If TTN hangs when you start do a google for tomtom5 currentmap.dat (or search this forum)
* you DO NOT need to install 5.0 then upgrade
* you CAN just install the 4 CAB files direct to your PDA without using a PC
FOR THE PPL THAT NEED THAT"""FILE"""" TO MAKE IT WORK
email me [email protected] and il email it to you
I thought i should post in this thread being as tho I had loads of problems getting thins to work on my wizard but now it's done it works a treat. Here's how i did it:
1. Installed the 4 .cab files from the "2577" folder into the root of my mini s
2. coped the GB map onto my mini sd card
3. updated to 5.21 (i've read that you dont have to install version 5 first but i did and it work for me). To update i installed the 2 .cabs files
4. soft reset
5. create a "tomtom" folder and put it in "my documents"
6. in the "tomtom" folder put your voice files that you want to use also make sure that the "currant map" file is in there
7. pair your gps receiver with your mini s. Create outgoing port 6 then tick the serial port box.
8. start tomtom and setup etc choose "other gps unit" and select port 6
thats it it worked for me. tomtom will switch on your bluetooth automatically. it took me a while but it's simple once your've done it. I'ce hard reset me mini s a couple of times now and reinstalled tomtom and it's worked no problems.
cheers
I am having major problems with TT5 and my mini s. I have tried everything suggested and can get TT5 working but not 5.1 or 5.2 (just freezes when selecting a voice). However TT doesn't see my bluetooth gps. COM6 just doesn't appear in the list of COM ports available in the TT gps setup.
Any ideas?
Any advice would be greatly appreciated.
I had the same problem but then did the following:
1. On your desktop, launch Notepad.
2. Type & \Storage Card\XXXXXX_map\ (don't forget to add the final back slash and have a space between the "&" and the first backslash. (XXXX = the name of your map directory on ur SD card)
3. Save the file as CurrentMap.dat. Make sure it doesn't end up as CurrentMap.dat.txt!
4. Create a folder on your KJam \My Documents\TomTom
5. Copy your newly created CurrentMap.dat file from your desktop into \My Documents\TomTom on your wizard
Soft reset - hopefully it now works!
thanks for all,
finally, i had got it working.
BUT what folder i can Delete after all working?
thanks
Hi all. I’m having a real problem with my xda mini s and Bluetooth. After reading through the advice her got it working with Tomtom turning on Bluetooth and connecting to the receiver. After the mini s was turned off overnight Tomtom wouldn’t turn on Bluetooth, and turning it on manually was no good, as Tomtom wouldn’t connect to the receiver (see earlier post).
After much messing around did a hard reset and reinstall and all was fine, until the next day, when after the mini s was turned off overnight Tomtom wouldn’t turn on Bluetooth, and turning it on manually was no good Etc Etc!!
Does anyone know what is going on as I don’t want to have to do a reinstall ever morning!! Should I have kept my XDA2?
Hope you can help, as I don’t have much hair left as it is.
G'day,
I am trying to install TomTom v5.21 onto the rw6828 without much luck.
Tried to copy cab files and get instal unsucessful when running.
Tried to install from PC and get an error that setup.exe encountered an error and the application closed.
Any help appreciated
Cheers,
Matt
on Atom I did it. I use cracked version 5.2.1 and maps for eastern europe.
http://4pda.ru/forum/uploads/img-10857-tt_navigator_ppc_521.rar
(with russian voices)
if you need install instruction - I will translate
Have progressed
Ok..I managed to install the application but I am unable to install the maps now.
I am not sure if I need to start again, as I installed the app first then ran the wizard, it came up with no maps found, I then copied the map and config file to the storage card , when I click on the cab it thinks for a while then reports install unsuccessful.
Any help appreciated
write the correct path in config file (thats locate in "My documents")
I am sure, that the name of your storage card is different with current config.
Problem with GPS Reciver on Atom XDA with Tomtom
Hello, i've installed Tomtom 5.21 and the maps and everything is ok. but i can't make the link between my gps reciver (Royaltek Star III) and the atom XDA. I've installed the partnership in the settings but it doesn't connect with the antenna. I've seen in my other pda (ipaq hx4700 and ipaq hx2790) that there is a bluetooth manager in the connection setting but there is non in the atom xda. Do you know what's the solution ?
Thanks
kropotov, what is the procedure to install your version of tomtom ?? and how do you change the path in currentmap.dat ??? THX in advance
solal
actualy I use cracked version 5.21 from www.4pda.ru
to run the program, you must
1. copy several files to Mydocument (include config file)
2. copy map to card
3. copy application to program files.
When you run application, it look to config in my documents.
So in different devices, you have different names of storage card (Storage, Memory card, SD card, CF card e.t.c.) you must edit config (storage name) to correct path to map files.
OK i am going to try I'll let you know thx
cookie,
i also own an rw6828. i purchased an HP iPAQ bluetooth receiver for it and am having the same issue as dragsterbox. that is i cannot seem to pair the receiver to the rw6828 (which is the same as the O2 Atom). what i would like to know from you is what gps receiver you are using and how you successfully paired the two. no-one has been able to diagnose, even on other forums.
i had no problems installing my version of tomtom on the phone though. i simply copied all installation files to the sd card and tapped the .cab files to install. program (v5) seems to work fine. it is just that the phone and gps receiver dont pair (which is dragsters issue). i am in australia also.
regards,
danield11
Daniel,
Never got Tom Tom working, but got Destinator happening.
Follow this link to have the GPS recognised
http://www.mtekk.com.au/Forums/tabid/56/forumid/29/postid/58463/view/topic/Default.aspx
This worked and solved by issues. I am using a HP IPAQ GPS
Map of India
Hi every Buddy
Tell me is there any software which can Guide to Travel in India
THANKING IN ADVVVVVV
Hey everyone,
I have finally got my gear (HP iPAQ rw6828 & HP iPAQ Bluetooth GPS Receiver) talking to each other using TomTom Navigator 5 on Windows Mobile 5!
I thought I would post what worked for me in case I could possibly assist any others out there with the same issue. From what I have seen there have been a couple. If I have helped, I would love to hear from you!
If you have had many attempts at this, I would recommend you clear all previous bluetooth pairings, installations and GPS settings then do a soft reset at the minimum. A hard reset is preferable (be sure to backup all contacts, etc to a computer before doing so!).
1. Install TomTom on your device. DO NOT pair the bluetooth receiver yet!
2. Go to Start, Settings, System, GPS.
3. Set GPS program port to COM0.
4. Set GPS hardware port to COM7. Tap OK to exit. DO NOT pair the bluetooth receiver yet!
5. Go to Start, TomTom Navigator.
6. Configure TomTom and your connection as Other Bluetooth Receiver and select COM0 (the GPS program port) as it should be available now (it was never previously available to me in all my other efforts!).
7. Exit TomTom Navigator.
8. NOW pair the bluetooth receiver in Start, Settings, Connections, Bluetooth. Switch bluetooth on and then on the Devices tab select New Partnership. Once found select the bluetooth receiver and tap Next. Enter the required passcode and tap Next. Check the Serial Port box and tap Finish. BEFORE creating bluetooth COM ports go to the next step.
9. Tap OK to go back to Settings then System tab and GPS.
10. Set GPS program port to None. If you do not do this, you will not be able to set the incoming port as COM0 in your Bluetooth settings. We will come back and change it again later. Tap OK to exit.
11. Go back to the Connections tab and click Bluetooth.
12. On the COM Ports tab select New Outgoing Port. Select your GPS receiver and tap next. Select COM7 (the GPS hardware port) and tap Finish.
13. Now select New Incoming Port and select COM0. If you cannot do this, it is most likely you skipped step 10. Tap Finish to exit.
14. Tap OK to go back to Settings then System tab and GPS.
15. Set GPS program port back to COM0. Tap OK to exit then close the settings window.
16. Startup TomTom Navigator and... VOILA! You should be seeing your current location in a matter of seconds!
The truly bizarre thing about my 3 weeks of attempting to get this to work was that I had actually performed all the above steps but possibly in different order (well all apart from the changing around of the GPS program ports in that particular way!). I could never get COM0 as a port in TomTom. So I highly recommend following these instructions to a T if you are having serious trouble like I was. I managed to put all the information I had gathered from various forums, HP support and colleagues at HP (yes I work for HP!!!) together and come up with a RELATIVELY simple way of doing it! In the age of Plug n Play, this seems like a very laborious way to do things. Couldn't someone make an easier way???
Many thanks to all that had responded in my desparation. You all have in one way or another assisted in getting this to work for me. My faith in the PDA world has been restored!
I think my next purchase will definitely need to have an inbuilt receiver :wink:
Happy Trails Everyone!
It drives me crazy !
Hello,
I also own a rw6828. When I installed Tomtom 5 on my pocket pc from the ttn.cab file, the install works. I can launch the product, but it says I need an activation code. When I then replace the exe by the c---k one (which works for a colleague, but not having a rw6828), then it fails... Would you have any idea plse ? Which c---k should I be using ? Where can I find one ?
Thks for your help as this issue is driving me crazy and I am nearly regretting having bought that device !!!
Thanks !
Re: It drives me crazy !
sibertoul said:
Hello,
I also own a rw6828. When I installed Tomtom 5 on my pocket pc from the ttn.cab file, the install works. I can launch the product, but it says I need an activation code. When I then replace the exe by the c---k one (which works for a colleague, but not having a rw6828), then it fails... Would you have any idea plse ? Which c---k should I be using ? Where can I find one ?
Thks for your help as this issue is driving me crazy and I am nearly regretting having bought that device !!!
Thanks !
Click to expand...
Click to collapse
Version 5.21 does not need activation in wm5 devices
Here is a very simple tutorial:
connect device via A/sync
run TomTom installer from desktop install via Benelux and tick "install the application".
By default it will install to main memory(whether you select SD or not)
copy your map to SD card putting raw map files into a folder called "TomTom".
If you have other maps you can create another folder called "TomTom1" and drop raw map files into there.
Pair your device with Bt GPS receiver, serial port should come up under partnership settings, make sure box is ticked.
Tap com ports tab and select New Outgoing Port, select com7
There is no need for an incoming Port!
Run TomTom and goto "Change Preferences" goto "Show GPS Status" selet BT receiver and select com7..... Done!
Great thanks
homer285,
Thanks a lot for your support. I have been having issues for 10 days and thanks to you, it is solved now !
Thanks !
What I did
Hello,
Just a quick note to describe what I did. For a reason I don't know, I never managed to install Tomtom 5.00 from the DVD, idem for 5.10 or 5.21. Therefore, I installed TTN from the sd card using a ttn.cab file. I directly install the 5.21 version with its patch. I did pair my BT GPS receiver and finally launch TTN 5.21 and had the pleasure to see it working. I was happy because I started regretting having bought this device.
My error was that I thought that I needed to patch the 5.00 version, then secondly install the 5.10, and finally install the 5.21 version.
Hope this helps and thx for your support.
Cheers
(HP iPAD rw6828, mini SD 1 Gb, Globalsat bt338, TTN 5.21)
there is already TTN 6 for WM5 and WM2003 exist
I need to backup my data and systems before even thinking about a new TT version :lol:
This is the reason why I asked in another post if there was a tool to do that, and I am under the impression that I need to add another softwarez to do so, ie there is no already installed tool on the ipaq rw6828, which, imho, is a shame !
backup? Why? TT6&maps can be installed in SD card
TT6
I installed TTN 5.21 on my device, and maps on my storage card. It's true that I could have installed on the storage card, but I was not asked the question...
Is TT6 already available ? What's the enhancements wrt TTN5 ? I may open another post...
Got my htc tytn loaded totom 5 onto it and guess what bluetooth gps doesn't work with it! Cannot get correct comm port .According to HTC TomTom know about this. Just hoping somebody already has a fix for this?
Had no problems pairing my BT Slim GPS with my Vario II, TomTom runs fine.
What GPS receiver you using ?
works fine on my xda trion as well.......im using tom tom 5.21 with BT-338 gps receiver.......im also using com port 0......you basically have to pair it and then add outgoing port as com port 0.....and during the installation on tom tom make sure you choose com port 0......that worked for me anyways....hope that helps.
Bluetooth GPS HTC TYTN
Thanks guys have re-installed tomtom and now it comes up with com prt 0.Probably didn't install correctly first time .Now up and running .Fantastic!!!!
I could cry
Hi everyone - I am having a similar problem
I have a new GPS receiver and have established a bluetooth partnership and done the outgoing port to com0 which is the default.
Tom Tom is installed and when I try and configure it I am not seeing all the options shown on the website. It just says no gps detected or something similar. I am sure its something simple.
Can anyone help please?
mobilecat said:
Hi everyone - I am having a similar problem
I have a new GPS receiver and have established a bluetooth partnership and done the outgoing port to com0 which is the default.
Tom Tom is installed and when I try and configure it I am not seeing all the options shown on the website. It just says no gps detected or something similar. I am sure its something simple.
Can anyone help please?
Click to expand...
Click to collapse
There's a program CreatePorts that is floating around (you'll have to do a search) that allows TomTom to see additional com ports in the Bluetooth GPS setup. I used this same program on my Samsung i730, and now on the 8525.
You just paid your GPS with the PPC, create the outbound port (in my case I used com 2), run CreatePorts, and then go in to TomTom GPS setup.
Once you get it set up, you don't have to run the app anymore, and TomTom works great
OUCH
dew.man said:
There's a program CreatePorts that is floating around (you'll have to do a search) that allows TomTom to see additional com ports in the Bluetooth GPS setup. I used this same program on my Samsung i730, and now on the 8525.
You just paid your GPS with the PPC, create the outbound port (in my case I used com 2), run CreatePorts, and then go in to TomTom GPS setup.
Once you get it set up, you don't have to run the app anymore, and TomTom works great
Click to expand...
Click to collapse
I tried running this but i can still only assign certain points from my bluetooth manager and dont have these displayed on the tomtom menu.
When you go into the GPS Status settings on Tomtom and tap configure, have you tried looking to see which com ports it lists and then going back to the bluetooth settings and doing trial and error to allocate any of those port numbers as an outgoing port for your GPS unit?
For my genuine Tomtom GPS unit, I did not even have to set up a port, I just had to pair the device but when I used a friends alternative brand of GPS unit for a short while, I was only able to get that one working under Com port 4. I can't quite remember but it may even have been a case that Com 4 only became visible in the Tomtom GPS configure menu after I had allocated it as an outgoing port for the GPS device (sorry, it is a while back so I can't quite remember the order in which I set it up)
Hope you get it sorted
arghh
I a so annoyed. I did this and had no luck. Later on I did something and got the option for port 2 and used it and it was great. I had to do a soft reset for something else and I cant do it again. tried everything.
MMMM
Happy yet frustrated
I have deleted create ports from my device as it only works once. I have reset my device. I reinstalled createports and extracted the file. I then saw port 2 straight away - the one that had been missing in tomtom.
The only problem is that if I do a soft reset I have to do that again!
It is very frustrating trying to get some of these things working. Have you thought about upgrading to Tomtom 6? you may find you have less problems getting the pairing and ports working right.
Failing that, I am sure you will be able to get it working again, just keep trying all the com ports one by one until you find one that appears in the Tomtom configuration. Like I said, on my XDA Vario II (Hermes) I managed to get it working on Com 4 and when I had an XDA Mini S (Wizard) I seem to remember that it was either Com 6 or Com 7 which worked on that one.
You might want to check the bluetooth settings for security and beam as well. Try turning security off (ie. passkey required off) and make sure the beam setting is ticked to receive all incoming beams.
I will keep my fingers crossed for you
download co-pilot for uk
Dashley said:
Got my htc tytn loaded totom 5 onto it and guess what bluetooth gps doesn't work with it! Cannot get correct comm port .According to HTC TomTom know about this. Just hoping somebody already has a fix for this?
Click to expand...
Click to collapse
Any one got the co-pilot softwear to insallate for MDA VARIO 2.
download co-pilot softwear for UK.
Any one got the co-pilot softwear to insallate for MDA VARIO 2.
another thread
I have just seen another thread about XDA with a patch for this that seems to work. Can someone merge the threads?
Createports
Can anyone point me in the right direction to find this program. I think that it is hidden on the web somewhere near the holy grail.
Help with TT6 + TYTN + Royaltek 2110 please
I have a TYTN and a GPS Royaltek 2110. I have position com0 and other programs GPS work correctly. The problem is that the TT6 always shows he himself message “GPS nonfound”, although always I can say to him that this in the COM0 but does not find satellite.
That I can do? I put the TT5
somebody it has the CreatePorts program and it can put it?
Thanks
try this thread:-
http://forum.xda-developers.com/showthread.php?t=288865
Pairing TOMTOM 6 with Bluetooth GPS
For all of you that are having problems pairing your GPS Bluetooth receiver with your Hermes see the instruction set below:
#Hermes can not be in flight Mode#
1st: Run BTHTools1100.exe
--------------------------------------------------------------------------------------------------
2nd:
Pair them in Bluetooth Manager
Set:
Holux (outgoing port com4)
Incoming Port (com8)
no security
------------------------------------------------
3rd:
In settings >> Connections >> GPS
Programs set GPS program port to Com 8
Hardware set GPS hardware port to Com 4
baud rate 4800
If GPS program is not seen in settings\Connections
Use resco registry or other program and:
Go to Hkey_local_Machine\ControlPanel\GPS settings\ creat (make new) "Group" with Dword data =2
---------------------------------------------------------------------------------------------------
In TomTom chose:
Bluetooth GPS
Com4
should be working Now
Pairing TOMTOM 6 with Bluetooth GPS (easy) - Kaiser
First after reading the posts I thought I had to reinstall Tom Tom or install another software. Luckily, I paused and read the message when I was about to configure my other bluetooth receiver. It said, first you must establish your bluetooth connection. Well, I lied coz I did try to go on and couldnt find COM 0 or whatever you guys have said.
But that's what I did, eventually. Paired the device as BT GPS, check the serial connection (not sure if secure connection needs to be checked but I left it unchecked to find out later). After that go to com port tab, and click add new port ie selected COM0.
Then go back to TT6 (restarted in my case), and to other bluetooth gps receiver then found COM 0 in there. Voila!!
Chose COM0, but still got no gps device message. Waited for about 2 mins while reading further into the posts and now my TT6 is working.
You could call that strike of luck I dont really care but yeah.. saving some batt power on my kaiser for the bank holiday;s trip. Have a great one everyone!!
P/s: Mine is O2 stellar on Dutty's great work.
Com 4 is the only one that works with Schaps 3.54