I've had my T-Mobile MDA since Feb 22...loving it!! UNTIL today. Came home from work and my SD card is wiped clean....tried to restore the files they are just GONE!! So I reformated the card and loaded a couple of programs on it and then soft reset....damn screen has just been sitting here starring at me for the last 2 hours while I search and try and figure out how to get this thing started!!!
Can someone please tell me how to hardreset this thing from this screen...I gotta get some sleep soon.
I think I have searched and tried every reset opt so far but nothing seems to work!! HELP!!
Thanks
Tippy
T-Mobile MDA
IPL 1.08
SPL 1.08
GSM 01.09.10
OS 1.8.10.2
If its the MDA VARIO ( = Wizard ) then the hardreset has to be done this way:
1. Push the ( AND HOLD! ) the Comm Manger Button AND the VOICE DIAL Button
2. Now ( still holding the two buttons! ) push the Reset Button
3. Now ( still holding the two buttons! ) let go of the reset Button
4. Wait for the Screen to change/Message comes up with info to push the SEND Button ( = green telephone button ) to format/hard reset
5. The Hardreset begins & you can setup your MDA again.
Thanks!! Was tired of looking at that splash screen...am thinking I just might take the plunge and do a new rom this weekend.
tippy
Related
I have dopod c 800 which is broke wjile install the WM 6 ,now the condition just the startup screen with :
- dopod logo
- ipl 1.09.001
- spl 1.09.001
-gsm 02.69.90
i'm trying to get into bootloader by pressing camera and stylus or camera+comm manager + Stylus , but the screen was goin back to the logo of dopod again.see the figure
i think after get into bootloader i can install the original rom first then install again the wm 6
some body help please
Try holding the Camera Button after Reset, until Bootloader Screen appears, this must work out !
You have to hold both buttons (camera and commanager) until the bottscreen appears. only teh softreset button is pushed once.
DOn´t left the other bottons before bootscreen appears.
Good luck
Thanks
papamopps said:
You have to hold both buttons (camera and commanager) until the bottscreen appears. only teh softreset button is pushed once.
DOn´t left the other bottons before bootscreen appears.
Good luck
Click to expand...
Click to collapse
Thanks it works but pls find the way to make the gsm work after ugrading to WM 6 , nice system ..but sad always searching signal for the handphone.
Thank you
I have a big problem with my mda vario.
the begenning: !. i done a hardreset and before finishing a softreset.
now my ppc doesnt boot anymore. the hung up is by the screen of t-mobile.
Plese help me!
What can i do now, is my mda vario over?
No resets bring me forward
Touchscreen or any other buttons doesnt react and doesnt work anymore.
The only thing that i can do is to remove the battery
Stupid question, but why would you do a soft reset in the middle of a hard reset?
Anyway, probably your best bet would be to download the latest t-mobile rom, put your phone in bootloader mode and flash the rom again. This time, avoid doing a soft reset in the middle of it.
how do i install the rom in the ppc if it doesnt boot.
can you give me a todo list, please ?
how can i put my phone in bootloader mode
Press and hold the camera key and then press the on button. When multicolored bootloader screen comes up release the camera button and then you're ready to flash.
Ok got my phone doing some funky stuff...
Before I turned off the phone, the phone was default, with extra programs that is all. Basically i was doing my thing, then the phone kept trying to record a new sound file, in the notes section.
I turned off the phone and back on, now the phone starts in the bootloader, 3 color screen.
I can successfully patch ROM files to the phone, but I can't get past the bootloader. I have pulled all the casing off the phone, just to see if anything was holding the buttons in, but no such luck either.
IPL 2.20
SPL 2.20
Loaded on some of your rom's cause it's about time i did this.
I can hold the camera key, and get to the reset factory default, but when i press the green key nothing happens. Anyone got any idea's what is going on
fixed with a hard reset
how to hard reset this model ?
com button, power on +camera ;keep them
how to do this ??? and what - where is the Com button
how to do this ??? and what - where is the Com button ?
what is ???
please reply to this email [email protected]
Could anyone please use the mtty method to back up their cingular 8125 onto the sd card and upload it so i can restore the pda half of my phone. I've been trying to get this thing out of boot screen for days and days. I've tried to downgrade , upgrade you name it. I took it to a cingular store and (it came back to me this way )when I picked it up the guy said it just happened and blammed it on the phone. I told him to replace it or I'll call the cops for him messing up my phone and he kicked me out of the store. Anyway ,it gets to the boot screen and say cingular raising the bar and heres the other info..
ipl 1.08
spl 3.08
gsm 01.09.11
os 1.8.11.1
i have used a couple downgraders from here to try anything..any help would be great. Thank you in advance for any help.
Rocky
try to format it
Press Hold on comm mangaer key + Voice Tage
and press reset key down of the IRDA on time
after restart will find black screen them press the call key (Green Key)
I've tried that.. nothing works.. I need a backup..
Help, help!!!!
Certainly when upgrade from WM03 to WM06, we all must go to the boot loader option to clean registry, disable KITL, clean storage...etc . However,poor me, I have an XDAII with broken record and camera button, so that I can not get in Boot Loader ( Press ResetButton and hold down CameraButton + RecordButton )
So could any one solve this problem?
many thank!!!!
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Arimbi said:
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Click to expand...
Click to collapse
yes, its because you'r flashing Radio only, if you are flashing WM5/WM6/WM6.1/WM6.5 you need to enter bootloader mode!
Me to have only record button not working
But i made it,open your phone open whole parts,now attach your battery with a rubber ring so phone can start,notice that white part which is situated near the camera which has four pines fix it with screw or until your phone boots, you need four hands either to enter in boot loader mode or hard reset.you should connect the circuit button with a metal/wire,first try that button you will see camera or record working apply same for your needs. out of that four points of button adjust three to connect toughether to activate.