Related
THE CABS IN HERE A FOR O2 (IF SOMEONE CAN CHNGE THIS AND PUT THE UPLOADS IN WIKI AND REPLACE WITH LINK THAT WOULD BE GREAT)
Ok so I bought an XDa Exec.. and like most thought it was going to be great when in truth it sucked..
With the help of all those on here (far to many to mention I now have by far the fastest most stable pDA I have ever had) This got me to thinking that to have all the info and files in one place would maybe help other O2 users so here goes..
What to do..
Firstly If your device has already been running then Hard reset and perform vanilla install.
Press the two -- keys on the keyboard at the same time and reset (yes that the one to the left of the red phone button and the one to the right of the green phone button)
once set up begins go through the screen set up and the device will give you a three second warning when this appears soft reset.
when it boots up you now have vanila install. ie its running but without all the O2 crap but also without your settings.
Next you need to get certain files.
UNI_ext_rom unlocker frem here http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
regedit (trial here) http://www.pocketgear.com/software_detail.asp?id=17108
O2 connections only cab at bottom of post
This extended Rom at bottom of post
Pocket Mechanic: Download (www.antontomov.com) and install this essential app. You have a few days on trial, and it's necessary for some steps
Ok now using active sync connect to your device and place the following in my documents (anywhere realy I just find I remember that)
*UNI_ext_rom unlocker
*regedit
*O2 connections only cab
*Pocket Mechanic
run both before resetting and also open regedit and change the following
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1]
"Bootphase"=dword:00000002
"Order"=dword:00000001
"LoadFlags"=dword:00000001
"DriverPath"="Drivers\\BuiltIn\\TrueFFS_G31"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1]
"MountHidden"=dword:00000000
"Folder"="Extended_ROM"
"PartitionDriver"=""
"Name"=""
"DefaultFileSystem"="FATFS"
RESTART EXEC.
ONCE RESTARTED CONNECT VIA ACTIVE SYNC
you should now be able to see and edit the extended rom. delete all files then unzip the extended rom you downloaded from here and copy all the files across into the folder.
Now hard reset the device
This time allow the extended rom to install ie do not stop at the 3 seconds bit.
NOW browse to my documents and run pocket mechanic.
then run O2 connections only cab
this will then ask you to choose installation choose the bottom one and it will restart your device.
now browse to programs pocket mechanic and follow below
Notification Queue: This can be done later, but it's nice to get familiar with this process whilst your queue is small. Using PM, open the notification queue. You may already (yes!) find some duplicate (yellow icon) sddeamon entries. These seem to replicate during an ActiveSync. You can/must delete all duplicates from time to time. You will also, in future, find some "\.\\Notification.....SCRIPT..." entries. Keep an eye out for these. Most mature within minutes of you finding them, so let them expire. Many are future-dated and tightly back-to-back. These can nearly always (I've never had a regret) be deleted without repercussions. If you don't manage these, they tend to breed, and anyone with XDA experience knows what happens when your queue fills up (failed alarms etc). I'm unclear as to where these come from - undoutedly an app that is not behaving elegantly (regular registration checks etc), and if you follow the steps on this post you should NOT find any - ie the apps here do not seem to be culprits. But, keep an eye open...
Registry cleanup: Again, this can be done later, however you'll soon see the beenfit of doing it now. Using PM, run registry cleaner. You'll get around 6 entries, all of which can safely be deleted. If you did not follow step 1, you may have to examine eahc entry to see if the O2 ROM is messier. The beauty of this step is that from now on, you can safely clean everything that PM finds in the knowledge that it's a leave-behind from an app you installed, and now you can install, de-install, and provided you clean up the directories (easy) you KNOW for sure that you've completely gotten rid of the failed app. Winner!
OK now you can install all the apps you need. I have copied the cab files to the storage card that way if I ever have to hard reset I have everthing, please note I also copied the O2 connections only cab to there.
WELL I am open to comments about this and must stress you do this at your own risk but hell it worked for me and I have as I said the fastest PDA I have ever had.
so over to you guys.. PLEASE note this is in no way my own work it is all thanks to other people on here but hopefully I have put it all in one place..
all comments welcome accept the one that sais Magpies a knob
Hi many people are looking
and a few downloading comments would be good..
does it work any ideas of additions into it etc etc etc
I like it, but for a new Pocket PC user such as myself. It might be hard to follow some of your instructions. But I like the idea of putting Pocket Mechanic in the ExtROM. I was considering of doing this too, but I want to add MemMaid and HandyMenu with Pocket Mechanic.
This would be a temporary use for the ExtROM for now before Buzzzzzz releases the partition hack. Then, I would rather use the ExtROM as part of my internal memory.
I think you need to WARN PEOPLE CLEARLY THAT DELETING FILES FROM ORIGINAL EXT ROM IS NOT GOOD.
And then let them make up their own mind.
I thought about doing what you posted but tbh its too much bother.
It runs OK as it is. All I use this thing for is phone, streaming radio and anime.
In corporate with no crap OEM stuff I havent tested and normal o2 ext rom it works fine.
I wanna say thanks, had some spare time todaylooking after the sick missus and carried out the procedure, dont know if its running much better than my corp install before but it was good fun and easy to follow
Has anyone got TodayPlus http://www.pocketpcfreeware.com/en/index.php?soft=843
up an running on the wizard. It is/was the best todayscreen plugin on my old Ipaq. I can get it to run as a stand alone app. but not to integrate as a plugin.
Al
Hmm.. I reviving this threat after 'discovering' something called 'TodayPlus'. I did a google to it and it seems to be a very powerful program. From the looks of it, it seems to have the potential to cover both PocketBreeze and PocketPlus.. and yet it seems to be not often being discussed here. It seems to be able to do everything, by scripting (feels to be like the PPC version of Samurize.com)
I'm bound to give it a go this weekend.
Those who are interested, take a look at this MASSIVE forum just for this today plugin/application.
http://forums.jhollin1138.com/
French version http://www.todayplus.fr.tc/
You may able to download the software from the link above (post by `wizzzard`).
Note that, there are a lot of software named TodayPlus, which includes a Palm based software that tries to emulate PPC Today. So, it is rather confusing to do a google for it. Anyway, the 'head' of TodayPlus seems to be at this site
http://www.dark-mojo.com/
But it seems to be currently down.. interesting...
i got it working
http://forum.xda-developers.com/viewtopic.php?p=360201#360201
but i couldn't get it to update weather, rss,radar
attaching the program
Todayplus is/was the best plugin I found. It worked perfectly on my WM2003 Ipaq2210 and works on my WM5 Wizard. It was designed for WM2003 and does not support landscape correctly. There is no support available from the author but remains for me the most adaptable today screen plugin.
Don't work for me...
I got only a blank screen. Any suggestion?
Ciao
blank screen
i have given edited dll also in that archive.
Skip the steps for editing it and you have to follow these steps
phuntum (05-27-2005) - v0.11.0
On your PPC use a file explorer that will allow you to see extensions and hidden files to find the file “todayplus.dll” in \Program Files\TodayPlus and copy it to your PC. On your PPC turn off the TodayPlus plugin (uncheck in the Settings/Today screen), soft reset, and move “todayplus.dll” from \Program Files\TodayPlus to \My Documents. On your PC use a hexeditor to open the “todayplus.dll” and search for “7D 1E A0 E3 03 08 A0 E1”; replace “7D” with “8D”; save the edited “todayplus .dll” and copy it back to \Program Files\TodayPlus on your PPC. Delete” todayplus.dll” from \My Documents and reset your PPC. On your PPC turn on the TodayPlus plugin (check in the Settings/Today screen) and soft reset.
phuntum (05-28-2005) - v0.11.0
The above fix is permanent. Save the new todayplus.dll in a safe place so that if you have to reinstall (e.g., after a hard reset) all you need do is install, disable, and replace as per above. You might want to save the instructions just in case. Free hexeditors are abundantly available. Do a web search for one. It's a great program and the effort is worth it. When you're ready, surf over to http://www.jhollin1138.com for a goldmine of help. There is a great debate as to whether the fix should be shared--somewhat hypocritical in my estimation, since those who were lucky enough to get it before it disappeared are using it.
these are the directions from ppcfreewares i followed
after doing this go to this thread http://forums.jhollin1138.com/viewtopic.php?t=1292
and start with no 6 in instructions
good luck
I still need to reinstall this plugin after upgrading my ROM.
There are loads of diferent skins available my favourite is attached.
The Dark Mojo forum closed ages ago but discussions particularly on the "Hammerskin" skin are ongoing on http://forums.jhollin1138.com/
Hammerskin is awesome but it was too much of a resource hog last time I tried it.
Sorry for the double post
updates?
did u get weather and rss updated?
I have tried it twice on my Kjam. Used the modified dll provided. however, I can only see a white screen when trying to access the settings! :S Does anybody know what I am doing wrong? Thanks
Ok, I found it! I was missing the .net!
Very nice application with beautifull skins! Only drawback is that it does not auto refresh when you add a new apointment or task!
Apart from that its a really nice application!
Arrgghh,
Reinstalled on my Wizard after upgrading to Molski's ROM. I can get it working as a plugin rather than as a stand alone program, which previously was my stumbling block. Now I can't get the config utility to remember my location or get weather and rss feeds updated. This did work on my old ROM. I think it is just some reg settings that need creating but why it worked before and not now I do not know.
Hi Guys,
Im a newbie to this plugin but so far I understand that its able to make short cuts on the "desktop" just like a normal pc....and thats what Im looking for.
Ive followed the instructions carefully and the first time it went okay....i.e I got the slider.txt in the skin box. However I didnt find the "okay" button on the top.
Well I followed the instructions but it didnt show up on my desktop....strange so I uninstalled.
Now Ive been reading a bit further and read that the reason why it might not have workd could be the date so I decided to set back the clock 2 years and reinstall it.
2nd time around I dont get the slider.txt option, it has saved my settings from my first install....and it still doesnt work.
help help help
Well after som struggle I managed to get the slider.txt into the "Select Skin (DLL)"
But its still not working on my today screen. I can choose it as the only item on the today screen however its just blank.
Is this because I use a special black screen (tsk file) for my back ground ?
Also its seems to forget my location (Lat/Long)
Any help so that I can get it working ??
Im using a Qtek 9100 with WM 5 OS 5.1.195 Build 14847.2.0.0
Oh I'm happy again
I finally got Todayplus running properly again. Weather and RSS are updating correctly.
This is what I did.
1 install Todayplus cab
2 Disable Todayplus from Settings/Today/items
3 Soft reset. Or power cycle the phone.
4 Overwrite todayplus.dll with the modded one
5 create directory \program files\todayplus\Buffer
6 Connect to internet and verify connection with PIE, minimise
7 Run todayplus config
6 Tab to Weather/RSS add new weather cities and rss feeds
7 Tab to Time/Storage add new timezone and set storage path to \Storage Card (case sensitive and device specific for Wizard?
8 Close Todayplus config
The config utility would not save my location coordinates on the owner info tab so I manually entered the values into HKCU\Software\SRSSoft\TodayPlus\coords\1 (string value of the form 53.483,-2.053) You can get your city coords from http://www.heavens-above.com/
9 Disable all other today screen plugins and enable todayplus. Close the settings program.
On returning to the today screen after a short wait Todayplus should be working. This worked for me but there is loads of information at http://forums.jhollin1138.com/viewtopic.php?t=1292 if you need further help.
Im pretty new to pocket pcs, with my Wing being the first. When i load my phone up i usually have 15.xx mb available (is this good?) and thats with fring (chat client) automatically starting up, but i usually close it. I use my slide to unlock program by when i turn off my screen (tap power button) and when i hit any key the slide to unlock automatically comes up. After just using this once, my available memory drops down to 9mb. Is this normal or should i get new slide to unlock/ get rid of it.
How much memory should i try to keep available for program memory and what can i do to free up more program memory.
thanks a lot,
bline
edit: i thought this sounded interesting but i need help with it so anyone that does it can u help me?
4) Move/Remove StartUp links:
...a) Using Resco File Explorer ...
...b) make directory "\Windows\StartUpDisabled"
...c) if you don't use MyFav5 Plan
......copy "\Windows\StartUp\My5MsgCenter.lnk" to "\Windows\StartUpDisabled\My5MsgCenter.lnk"
...d) if you don't use Voice Commands often (you can still manually start app)
......copy "\Windows\StartUp\Voice Command.lnk" to "\Windows\StartUpDisabled\Voice Command.lnk"
5) Backup & Remove Services
...a) using Resco Registry editor ...
...b) goto "HKEY_LOCAL_MACHINE\Services"
...c) if you don't use MyFav5 Plan (SMSCSend links to my5client.dll, I don't have My Fav 5 plan, so I don't need this service)
......1) click and hold "SMSCSend"
......2) choose 'export' from popup menu
......3) save SMSCSend reg export somewhere for backup
......4) delete "HKEY_LOCAL_MACHINE\Services\SMSCSend" from registry
...d) goto "HKEY_LOCAL_MACHINE\Services"
...e) if you don't use Windows Live (don't know for sure, but I think this service is what slowly drains available memory, finally forcing a daily reboot. don't have to 'daily reboot' after disabling this service)
......1) click and hold "Windows Live"
......2) choose 'export' from popup menu
......3) save Windows Live reg export somewhere for backup
......4) delete "HKEY_LOCAL_MACHINE\Services\Windows Live" from registry
...f) goto "HKEY_LOCAL_MACHINE\init"
...g) if you don't use the little 'quick launch' Tray App icons on the bottom of the Today Screen
......1) click and hold "Launch92"
......2) choose 'export' from popup menu
......3) save Launch92 reg export somewhere for backup
......4) delete "HKEY_LOCAL_MACHINE\init\Launch92" from registry
6) Soft reset & you are done ... a quick, and responsive Wing with much better memory usage.
...a) try this basic setup for a day to see what it is like without adding your favorite Today Screen plugins. Then add something in and compare memory usage. A lot of apps available now seem to need a updated version to be optimal with WM6.
...b) I installed ...
......1) SPB Mobile Shell 1.5 /w today screen plugin
......2) SPB Insight /w today screen plugin and 20+ feed sources
......3) pTravelAlarm
......4) Some non-memory resident programs and games
...c) getting 21 MB free on boot
...d) after all day phone, camera, email, insight, and IE browser useage, memory hovers around 14-18MB free
I thought I'd start a thread for anyone else out there like me who thinks that rhov23's Itask application is fantastic but has yet to figure out all of his/her device's configuration. If we all collaberate, we can probably limit the repetetive questions rhov23 gets so that he can continue to focus on advancing Itask even further.
Anyway, I'll keep this updated with the latest answers and fixes. Post your own configuration questions and hopefully someone else has already found the answer and can help you out. It is also worth noting that it is usually necessary to restart iTask after making changes or modifications. Below is my modified input.txt file and descriptions of the changes I've made thus far. There is still a ton of work left to do:
***Make no mistake, all credit and donations go to rhov23, here ->>> <http://forum.xda-developers.com/showthread.php?t=364344> for this super piece of technology. ***
Input.txt (pt 1)
\\ iTask Modification File
\\Background picture
&backgroundpic=back.jpg&END
\\Clock on main screen. modern=24 hour clock, old= 12 hour-ampm
&timeformat=old&END (I'M USING THE OLD= 12 HOUR-AMPM FORMAT)
\\Analog Clock background
&clockback=analog.jpg&END
\\Change your weathercode from Yahoo Weather. Change degrees=c to f if you want fahrenheit
°rees=f&END
&COUNTRY_ID=USIL0389&END
&COUNTRY_ID2=USMS0005&END
&COUNTRY_ID3=USCO0131&END
&COUNTRY_ID4=USAK0021&END (GO TO YAHOO WEATHER, SEARCH FOR THE CITY YOU WANT, COPY THE CODE PORTION FROM URL, LOOKS LIKE THIS->USIL0389<, PASTE AND REPLACE THE PRESET CITY CODES AND REMEMBER TO UPDATE THE WEATHER BY PRESSING BAR AT BOTTOM OF WEATHER SCREEN)
\\Main menu
\\ This is the text under the Main menu icons, do not use more than 8-9 charachters
&maintext1=Contacts&END
&maintext2=Calendar&END
&maintext3=Apps&END
&maintext4=Camera&END
&maintext5=Calc&END
&maintext6=Maps&END
&maintext7=iProgs&END
&maintext8=Weather&END
&maintext9=News&END
&maintext10=Games&END
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&mainexec1=\Program%20Files\PocketCM\PocketCM.exe&END (changed to pocketcm)
&mainexec2=\windows\calendar.exe&END
&mainexec4=\windows\camera.exe&END
&mainexec6=\windows\Favorites\Google Search - Maps.url&END (able to use a favorite from internet explorer for this button. very cool)
&mainexec11=\windows\cprog.exe&END
&mainexec12=\windows\tmail.exe&END (changed to messaging)
&mainexec13=\windows\Start%20Menu\Opera.lnk&END (changed to operamini)
&mainexec14=\windows\wmplayer.exe&END (changed to windows media player)
&powerdown=\itask\keys.lnk&END
&devicelock=\Program%20Files\S2U2\s2u2.exe&END (changed device lock to S2U2)
\\Mainbutton images
&mainbutton01=main01.swf&END
&mainbutton02=main02.png&END
&mainbutton03=main03.png&END
&mainbutton04=main04.png&END
&mainbutton05=main05.png&END
&mainbutton06=main06.png&END
&mainbutton07=main07.png&END
&mainbutton08=main08.png&END
&mainbutton09=main09.png&END
&mainbutton10=main10.png&END
&mainbutton11=main11.png&END
&mainbutton12=main12.png&END
&mainbutton13=main13.png&END
&mainbutton14=main14.png&END
&mainbutton15=main15.png&END
\\Loading time for different programs.(How long the loadingimage will stay on-screen. Numbervalue is in milliseconds
&mainloadtime1=2000&END
&mainloadtime2=2000&END
&mainloadtime4=2000&END
&mainloadtime6=2000&END
&mainloadtime11=2000&END
&mainloadtime12=2000&END
&mainloadtime13=2000&END
&mainloadtime14=2000&END
\\Games menu
\\ This is the text under the Games menu icons, do not use more than 8-9 charachters
&gamestext1=1&END
&gamestext2=2&END
&gamestext3=3&END
&gamestext4=4&END
&gamestext5=5&END
&gamestext6=6&END
&gamestext7=7&END
&gamestext8=8&END
&gamestext9=9&END
&gamestext10=10&END
&gamestext11=11&END
&gamestext12=12&END
&gamestext13=13&END
&gamestext14=14&END
&gamestext15=15&END
&gamestext16=16&END
&gamestext17=17&END
&gamestext18=18&END
&gamestext19=19&END
&gamestext20=20&END
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&Gamesexec1=\windows\calculator.exe&END
&Gamesexec2=\windows\calculator.exe&END
&Gamesexec3=\windows\calculator.exe&END
&Gamesexec4=\windows\calculator.exe&END
&Gamesexec5=\windows\calculator.exe&END
&Gamesexec6=\windows\calculator.exe&END
&Gamesexec7=\windows\calculator.exe&END
&Gamesexec8=\windows\calculator.exe&END
&Gamesexec9=\windows\calculator.exe&END
&Gamesexec10=\windows\calculator.exe&END
&Gamesexec11=\windows\calculator.exe&END
&Gamesexec12=\windows\calculator.exe&END
&Gamesexec13=\windows\calculator.exe&END
&Gamesexec14=\windows\calculator.exe&END
&Gamesexec15=\windows\calculator.exe&END
&Gamesexec16=\windows\calculator.exe&END
&Gamesexec17=\windows\calculator.exe&END
&Gamesexec18=\windows\calculator.exe&END
&Gamesexec19=\windows\calculator.exe&END
&Gamesexec20=\windows\calculator.exe&END
\\Gamesbutton images
&gamesbutton01=game01.png&END
&gamesbutton02=game02.png&END
&gamesbutton03=game03.png&END
&gamesbutton04=game04.png&END
&gamesbutton05=game05.png&END
&gamesbutton06=game06.png&END
&gamesbutton07=game07.png&END
&gamesbutton08=game08.png&END
&gamesbutton09=game09.png&END
&gamesbutton10=game10.png&END
&gamesbutton11=game11.png&END
&gamesbutton12=game12.png&END
&gamesbutton13=game13.png&END
&gamesbutton14=game14.png&END
&gamesbutton15=game15.png&END
&gamesbutton16=game16.png&END
&gamesbutton17=game17.png&END
&gamesbutton18=game18.png&END
&gamesbutton19=game19.png&END
&gamesbutton20=game20.png&END
\\Loading time for different programs.(How long the loadingimage will stay on-screen. Numbervalue is in milliseconds
&gamesloadtime1=2000&END
&gamesloadtime2=2000&END
&gamesloadtime3=2000&END
&gamesloadtime4=2000&END
&gamesloadtime5=2000&END
&gamesloadtime6=2000&END
&gamesloadtime7=2000&END
&gamesloadtime8=2000&END
&gamesloadtime9=2000&END
&gamesloadtime10=2000&END
&gamesloadtime11=2000&END
&gamesloadtime12=2000&END
&gamesloadtime13=2000&END
&gamesloadtime14=2000&END
&gamesloadtime15=2000&END
&gamesloadtime16=2000&END
&gamesloadtime17=2000&END
&gamesloadtime18=2000&END
&gamesloadtime19=2000&END
&gamesloadtime20=2000&END
Input.txt (pt 2)
\\ This is the text under the Apps menu icons, do not use more than 8-9 charachters
&appstext1=MemM&END (MemMaid)
&appstext2=Explore&END
&appstext3=Sling&END (Mobile Slingbox Player)
&appstext4=Media&END
&appstext5=TomTom&END
&appstext6=Word&END (Word .exe)
&appstext7=Ppoint&END
&appstext8=Excel&END
&appstext9=Reader&END
&appstext10=Mail&END
&appstext11=Photos&END
&appstext12=Paint&END
&appstext13=Music&END
&appstext14=Radio&END (using streamcenter radio streams as mobile favorite for this button)
&appstext15=Record&END
&appstext16=Messenger&END
&appstext17=QuickGPS&END
&appstext18=Registry&END
&appstext19=Manager&END
&appstext20=SkTools&END
&appstext21=None&END
&appstext22=None&END
&appstext23=None&END
&appstext24=None&END
&appstext25=None&END
&appstext26=None&END
&appstext27=None&END
&appstext28=None&END
&appstext29=None&END
&appstext30=None&END
&appstext31=None&END
&appstext32=None&END
&appstext33=None&END
&appstext34=None&END
&appstext35=None&END
&appstext36=None&END
&appstext37=None&END
&appstext38=None&END
&appstext39=None&END
&appstext40=None&END
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&appsexec1=\Program%20Files\MemMaid\MemMaid.exe&END (changed to MemMaid)
&appsexec2=\windows\fexplore.exe&END
&appsexec3=\Program%20Files\Sling%20Media\SlingPlayer%20Mobile\SlingPlayer.exe&END (changed to Mobile Slingbox Player)
&appsexec4=\windows\wmplayer.exe&END
&appsexec5=\Programfiler\Navigator\TomTom%20Navigator.exe&END
&appsexec6=\Windows\pword.exe&END (Word .exe)
&appsexec7=\Windows\Startmeny\Programmer\Office%20Mobile\PowerPoint%20Mobile.lnk&END
&appsexec8=\Windows\Startmeny\Programmer\Office%20Mobile\Excel%20Mobile.lnk&END
&appsexec9=\Windows\Startmeny\Programmer\Adobe%20Reader%20LE%20.lnk&END
&appsexec10=\Windows\Startmeny\Programmer\Meldingsfunksjoner.lnk&END
&appsexec11=\Windows\Startmeny\Programmer\Kameraalbum.lnk&END
&appsexec12=\windows\calculator.exe&END
&appsexec13=\Windows\Startmeny\Programmer\Lydbehandling.lnk&END
&appsexec14=\Windows\Favorites\Radio.url&END (using streamcenter radio streams from internet explorer favorites)
&appsexec15=\Windows\Startmeny\Programmer\Taleopptak.lnk&END
&appsexec16=\Windows\Startmeny\Programmer\Messenger.lnk&END
&appsexec17=\Windows\Startmeny\Programmer\HurtigGPS.lnk&END
&appsexec18=\Windows\Startmeny\Programmer\Resco%20Registry.lnk&END
&appsexec19=\Windows\Startmeny\Programmer\Comm%20Manager.lnk&END
&appsexec20=\Windows\Startmeny\Programmer\SKTools.lnk&END
&appsexec21=\Programfiler\Resco%20Explorer\Explorer.exe&END
&appsexec22=\windows\fexplore.exe&END
&appsexec23=\Programfiler\CorePlayer\player.exe&END
&appsexec24=\windows\wmplayer.exe&END
&appsexec25=\Programfiler\Navigator\TomTom%20Navigator.exe&END
&appsexec26=\Windows\Startmeny\Programmer\Office%20Mobile\Word%20Mobile.lnk&END
&appsexec27=\Windows\Startmeny\Programmer\Office%20Mobile\PowerPoint%20Mobile.lnk&END
&appsexec28=\Windows\Startmeny\Programmer\Office%20Mobile\Excel%20Mobile.lnk&END
&appsexec29=\Windows\Startmeny\Programmer\Adobe%20Reader%20LE%20.lnk&END
&appsexec30=\Windows\Startmeny\Programmer\Meldingsfunksjoner.lnk&END
&appsexec31=\Windows\Startmeny\Programmer\Kameraalbum.lnk&END
&appsexec32=\windows\calculator.exe&END
&appsexec33=\Windows\Startmeny\Programmer\Lydbehandling.lnk&END
&appsexec34=\Windows\Startmeny\Programmer\FM-radio.lnk&END
&appsexec35=\Windows\Startmeny\Programmer\Taleopptak.lnk&END
&appsexec36=\Windows\Startmeny\Programmer\Messenger.lnk&END
&appsexec37=\Windows\Startmeny\Programmer\HurtigGPS.lnk&END
&appsexec38=\Windows\Startmeny\Programmer\Resco%20Registry.lnk&END
&appsexec39=\Windows\Startmeny\Programmer\Comm%20Manager.lnk&END
&appsexec40=\Windows\Startmeny\Programmer\SKTools.lnk&END
\\Appsbutton images
&appsbutton01=app01.png&END
&appsbutton02=app02.png&END
&appsbutton03=app03.png&END
&appsbutton04=app04.png&END
&appsbutton05=app05.png&END
&appsbutton06=app06.png&END
&appsbutton07=app07.png&END
&appsbutton08=app08.png&END
&appsbutton09=app09.png&END
&appsbutton10=app10.png&END
&appsbutton11=app11.png&END
&appsbutton12=app12.png&END
&appsbutton13=app13.png&END
&appsbutton14=app14.png&END
&appsbutton15=app15.png&END
&appsbutton16=app16.png&END
&appsbutton17=app17.png&END
&appsbutton18=app18.png&END
&appsbutton19=app19.png&END
&appsbutton20=app20.png&END
&appsbutton21=app21.png&END
&appsbutton22=app22.png&END
&appsbutton23=app23.png&END
&appsbutton24=app24.png&END
&appsbutton25=app25.png&END
&appsbutton26=app26.png&END
&appsbutton27=app27.png&END
&appsbutton28=app28.png&END
&appsbutton29=app29.png&END
&appsbutton30=app30.png&END
&appsbutton31=app31.png&END
&appsbutton32=app32.png&END
&appsbutton33=app33.png&END
&appsbutton34=app34.png&END
&appsbutton35=app35.png&END
&appsbutton36=app36.png&END
&appsbutton37=app37.png&END
&appsbutton38=app38.png&END
&appsbutton39=app39.png&END
&appsbutton40=app40.png&END
\\Loading time for different programs.(How long the loadingimage will stay on-screen. Numbervalue is in milliseconds
&appsloadtime1=4000&END
&appsloadtime2=3000&END
&appsloadtime3=7400&END
&appsloadtime4=3000&END
&appsloadtime5=3000&END
&appsloadtime6=3000&END
&appsloadtime7=3000&END
&appsloadtime8=3000&END
&appsloadtime9=3000&END
&appsloadtime10=3000&END
&appsloadtime11=3000&END
&appsloadtime12=3000&END
&appsloadtime13=3000&END
&appsloadtime14=3000&END
&appsloadtime15=3000&END
&appsloadtime16=3000&END
&appsloadtime17=3000&END
&appsloadtime18=3000&END
&appsloadtime19=3000&END
&appsloadtime20=3000&END
&appsloadtime21=4000&END
&appsloadtime22=3000&END
&appsloadtime23=7400&END
&appsloadtime24=3000&END
&appsloadtime25=3000&END
&appsloadtime26=3000&END
&appsloadtime27=3000&END
&appsloadtime28=3000&END
&appsloadtime29=3000&END
&appsloadtime30=3000&END
&appsloadtime31=3000&END
&appsloadtime32=3000&END
&appsloadtime33=3000&END
&appsloadtime34=3000&END
&appsloadtime35=3000&END
&appsloadtime36=3000&END
&appsloadtime37=3000&END
&appsloadtime38=3000&END
&appsloadtime39=3000&END
&appsloadtime40=3000&END
Input.txt (pt 3)
\\Settings menu
\\ This is the text under the Settings menu icons
&settingstext1=Memory&END
&settingstext2=Light&END (IF ANYONE HAS THIS ONE FIGURED OUT, PLEASE SHARE)
&settingstext3=Network&END
&settingstext4=Power&END
&settingstext5=Screen&END
&settingstext6=Today&END
&settingstext7=Remove&END
&settingstext8=Clock&END
&settingstext9=Buttons&END
&settingstext10=Input&END
&settingshead=Settings2&END
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&settingsexec1=\itask\Memory.lnk&END
&settingsexec2=\itask\Backlight.lnk&END (IF ANYONE HAS THIS ONE FIGURED OUT, PLEASE SHARE)
&settingsexec3=\itask\Connections.lnk&END
&settingsexec4=\itask\Power.lnk&END
&settingsexec5=\itask\Screen.lnk&END
&settingsexec6=\itask\Today.lnk&END
&settingsexec7=\itask\Remove Programs.lnk&END
&settingsexec8=\itask\Clock.lnk&END
&settingsexec9=\itask\Buttons.lnk&END
&settingsexec10=\itask\Input.lnk&END
\\Settingsbutton images
&settingsbutton01=settings01.png&END
&settingsbutton02=settings02.png&END
&settingsbutton03=settings03.png&END
&settingsbutton04=settings04.png&END
&settingsbutton05=settings05.png&END
&settingsbutton06=settings06.png&END
&settingsbutton07=settings07.png&END
&settingsbutton08=settings08.png&END
&settingsbutton09=settings09.png&END
&settingsbutton10=settings10.png&END
\\Loading time for different programs.(How long the loadingimage will stay on-screen. Numbervalue is in milliseconds
&settingsloadtime1=2000&END
&settingsloadtime2=2000&END
&settingsloadtime3=2000&END
&settingsloadtime4=2000&END
&settingsloadtime5=2000&END
&settingsloadtime6=2000&END
&settingsloadtime7=2000&END
&settingsloadtime8=2000&END
&settingsloadtime9=2000&END
&settingsloadtime10=2000&END
\\This is the text under the Internal apps menu icons
&iprogtext1=Write&END
&iprogtext2=iSat&END
&iprogtext3=Timer&END
&iprogtext4=MiniCal&END
&iprogtext5=Draw&END
&iprogtext6=Tetris&END
&iprogtext7=Snake&END
&iprogtext8=PingPong&END
&iprogtext9=Puzzle&END
&iprogtext10=Breaker&END
&iprogtext11=Steveball&END
&iprogtext12=Solitaire&END
&iprogtext13=&END
&iprogtext14=&END
&iprogtext15=&END
&iprogtext16=&END
&iprogtext17=&END
&iprogtext18=&END
&iprogtext19=&END
&iprogtext20=Credits&END
\\iProgsbutton images
&iprogsbutton01=iprog01.png&END
&iprogsbutton02=iprog02.png&END
&iprogsbutton03=iprog03.png&END
&iprogsbutton04=iprog04.png&END
&iprogsbutton05=iprog05.png&END
&iprogsbutton06=iprog06.png&END
&iprogsbutton07=iprog07.png&END
&iprogsbutton08=iprog08.png&END
&iprogsbutton09=iprog09.png&END
&iprogsbutton10=iprog10.png&END
&iprogsbutton11=iprog11.png&END
&iprogsbutton12=iprog12.png&END
&iprogsbutton13=iprog13.png&END
&iprogsbutton14=iprog14.png&END
&iprogsbutton15=iprog15.png&END
&iprogsbutton16=iprog16.png&END
&iprogsbutton17=iprog17.png&END
&iprogsbutton18=iprog18.png&END
&iprogsbutton19=iprog19.png&END
&iprogsbutton20=iprog20.png&END
\\This is the update button on weather
&updateweatherbtn=updateweather.png&END
\\This is the background of news
&newsbackground=newsback.png&END
\\This is the background of settings
&settingsbackground=settingsback.png&END
\\This is the name of the Games apps menu that slides from right
&Gameshead=Games&END
\\This is the name of the internal apps menu that slides from right
&iprogshead=iProgs&END
\\This is the name of the Apps apps menu that slides from right
&Appshead=Apps&END
\\Parameter for retrieving unread sms and unanswered calls, operator
&unreadlaunch=\itask\unread.exe&END
&operatorlaunch=\itask\operator.exe&END
&settingslaunch=\itask\settings.exe&END
do i just copy and paste
Tried to change, need current ver.
jak3n3al said:
do i just copy and paste
Click to expand...
Click to collapse
This is an example of how some of the configuration should look. What exactly are you trying to set up?
well first of all im just now starting to understand this and i feel like a super genius
but my problem is most of the programs dont open it just shows a screenshot what do i do
rde34 said:
\\ This is the text under the Apps menu icons, do not use more than 8-9 charachters
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&appsexec1=\Program%20Files\MemMaid\MemMaid.exe&END (changed to MemMaid)
&appsexec2=\windows\fexplore.exe&END
&appsexec3=\Program%20Files\Sling%20Media\SlingPlayer%20Mobile\SlingPlayer.exe&END (changed to Mobile Slingbox Player)
&appsexec4=\windows\wmplayer.exe&END
&appsexec5=\Programfiler\Navigator\TomTom%20Navigator.exe&END
&appsexec6=\Windows\pword.exe&END (Word .exe)
&appsexec7=\Windows\Startmeny\Programmer\Office%20Mobile\PowerPoint%20Mobile.lnk&END
&appsexec8=\Windows\Startmeny\Programmer\Office%20Mobile\Excel%20Mobile.lnk&END
&appsexec9=\Windows\Startmeny\Programmer\Adobe%20Reader%20LE%20.lnk&END
&appsexec10=\Windows\Startmeny\Programmer\Meldingsfunksjoner.lnk&END
&appsexec11=\Windows\Startmeny\Programmer\Kameraalbum.lnk&END
&appsexec12=\windows\calculator.exe&END
&appsexec13=\Windows\Startmeny\Programmer\Lydbehandling.lnk&END
&appsexec14=\Windows\Favorites\Radio.url&END (using streamcenter radio streams from internet explorer favorites)
&appsexec15=\Windows\Startmeny\Programmer\Taleopptak.lnk&END
&appsexec16=\Windows\Startmeny\Programmer\Messenger.lnk&END
&appsexec17=\Windows\Startmeny\Programmer\HurtigGPS.lnk&END
&appsexec18=\Windows\Startmeny\Programmer\Resco%20Registry.lnk&END
&appsexec19=\Windows\Startmeny\Programmer\Comm%20Manager.lnk&END
&appsexec20=\Windows\Startmeny\Programmer\SKTools.lnk&END
&appsexec21=\Programfiler\Resco%20Explorer\Explorer.exe&END
&appsexec22=\windows\fexplore.exe&END
&appsexec23=\Programfiler\CorePlayer\player.exe&END
&appsexec24=\windows\wmplayer.exe&END
&appsexec25=\Programfiler\Navigator\TomTom%20Navigator.exe&END
&appsexec26=\Windows\Startmeny\Programmer\Office%20Mobile\Word%20Mobile.lnk&END
&appsexec27=\Windows\Startmeny\Programmer\Office%20Mobile\PowerPoint%20Mobile.lnk&END
&appsexec28=\Windows\Startmeny\Programmer\Office%20Mobile\Excel%20Mobile.lnk&END
&appsexec29=\Windows\Startmeny\Programmer\Adobe%20Reader%20LE%20.lnk&END
&appsexec30=\Windows\Startmeny\Programmer\Meldingsfunksjoner.lnk&END
&appsexec31=\Windows\Startmeny\Programmer\Kameraalbum.lnk&END
&appsexec32=\windows\calculator.exe&END
&appsexec33=\Windows\Startmeny\Programmer\Lydbehandling.lnk&END
&appsexec34=\Windows\Startmeny\Programmer\FM-radio.lnk&END
&appsexec35=\Windows\Startmeny\Programmer\Taleopptak.lnk&END
&appsexec36=\Windows\Startmeny\Programmer\Messenger.lnk&END
&appsexec37=\Windows\Startmeny\Programmer\HurtigGPS.lnk&END
&appsexec38=\Windows\Startmeny\Programmer\Resco%20Registry.lnk&END
&appsexec39=\Windows\Startmeny\Programmer\Comm%20Manager.lnk&END
&appsexec40=\Windows\Startmeny\Programmer\SKTools.lnk&END
Click to expand...
Click to collapse
does anyone know what the english version of these paths are?
woodicw said:
does anyone know what the english version of these paths are?
Click to expand...
Click to collapse
For example, &appsexec4=\windows\wmplayer.exe&END refers to my windows media player. If you either look through the folders of your device from your computer or look through your file explorer on your device you can find the path to just about every program and link it correctly to the proper button. So, you insert the proper path aft this part, &appsexec4=
helppp dude i love this program i just need some help
jak3n3al said:
helppp dude i love this program i just need some help
Click to expand...
Click to collapse
You need to copy the input.txt file from the iTask folder on your phone and paste that copy somewhere on your computer to begin modifying.
Don't know why??
Don't know why, but this would not work for me:
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&settingsexec1=\itask\Memory.lnk&END
&settingsexec2=\itask\Backlight.lnk&END
&settingsexec3=\itask\Connections.lnk&END
&settingsexec4=\itask\Power.lnk&END
&settingsexec5=\itask\Screen.lnk&END
&settingsexec6=\itask\Today.lnk&END
&settingsexec7=\itask\Remove Programs.lnk&END
&settingsexec8=\itask\Clock.lnk&END
&settingsexec9=\itask\Buttons.lnk&END
&settingsexec10=\itask\Input.lnk&END
But this does:
\\These are the execute-buttons in the following order from top left. Lnk and exe files accepted.
&settingsexec1=\windows\start%20menu\programs\links\Memory.lnk&END
&settingsexec2=\windows\start%20menu\programs\links\Backlight.lnk&END
&settingsexec3=\windows\start%20menu\programs\links\Connections.lnk&END
&settingsexec4=\windows\start%20menu\programs\links\Power.lnk&END
&settingsexec5=\windows\start%20menu\programs\links\Screen.lnk&END
&settingsexec6=\windows\start%20menu\programs\links\Today.lnk&END
&settingsexec7=\windows\start%20menu\programs\links\Remove%20Programs.lnk&END
&settingsexec8=\windows\start%20menu\programs\links\Clock.lnk&END
&settingsexec9=\windows\start%20menu\programs\links\Buttons.lnk&END
&settingsexec10=\windows\start%20menu\programs\links\Input.lnk&END
The first set starting with \itask work for me. The only one that doesn't is the link to backlight setting. The ones that work for you from the \windows\start%20menu don't work at all. Thanks for your input though.
rde34 said:
The first set starting with \itask work for me. The only one that doesn't is the link to backlight setting. The ones that work for you from the \windows\start%20menu don't work at all. Thanks for your input though.
Click to expand...
Click to collapse
Are you able to update the weather and news without being connected via active sync?
okay who here has itask completely working i have questions for them
rde first of all do you have an instant messanger name so you could help me figure this out quicker?
if not here are my issues i downloaded itask the other day and only a few programs worked the rest were screen shots how do i change it so it goes directly to the program?
i tried changing some things in input and saved but no changes occured
Some Help
This is a great application, which once you get used to is straight forward, if a little time consuming to set up. Half the fun for me is working out things that I don't really understand. I have the original input text file open alongside the one that I'm configuring. You just have to find the section in the input text relating to the icon your trying to link, and after the = add the path for the application you want that icon to open. The path can be found in Explorer (or better still Resco Explorer) on your device. Most applications are found in Windows, Start Menu, Programs. This is what you type into the input text file in itask, remembering a space has to be replaced by %20 and that the text has to be exactly the same as on your device.
So, if you want to assign a program (say File Explorer) on your device to the first icon on the Apps page of itask (ie when you launch itask, click the 3rd icon along which says Apps, the first button is in the top left of the new screen and has a smiley face on it) alter the text in the input.txt file of itask after &appstext1="\Windows\Start%20Menu\Programs\File%20Explorer.Ink&END" Don't use the " " I've included them to show what you should type. When you close input.txt and restart itask, the smiley face button in Apps will open File Explorer. And so on until you've linked an icon to each program you want to open.
Hello
If I start a program always comes shortly after another top ;-( (
How can I change that?
Orbit 2 (HTC) WM 6
max-es said:
Hello
If I start a program always comes shortly after another top ;-( (
How can I change that?
Orbit 2 (HTC) WM 6
Click to expand...
Click to collapse
The "another top" program you see is nothing but a screenshot, you can replace it by changing *loadpic*.jpg to any other picture you want, or if you want your application to open immediately, change your *loadtime configuration in input.txt to 0.
I Want To Know IF There Is Any Way That I Can Hide Programs Or Mask Them SO That They Don't Show Up On The Programs List And Also Hide Any Files Associated With The Program
HELP
Any Help Please
It's difficult to answer without knowing what you are trying to accomplish. Why would you want to hide programs on your own phone?
Anyway, your best luck will be with small programs, the kind that run as a single executable, that you can put somewhere on the SD card.
Im Sure Im Not The Only One With These Issues
My Girlfriend Was Always Questioning Me About Why I Always Kept My Phone Locked And Would Not Answer It When I Was Around Her So I Put A Program Called Magicall On My Phone I Don't Know If Your Familiar With That But You Can Screen Certain Calls Well As She Always Does Whenever I Leave My Phone Unlocked She Went Thru It When I Was In The Shower She Saw The Program But Couldn't Get Into It Sp She Went On The Internet To Find Out What It Was And Then She Wanted To Know Why It Was On My Phone And We've Been Arguing Ever Since So Please Help Me Id You Can It Would Be Much Appreciated Thank You In Advance
I don't have a technical answer..sounds more like it's a trust issue. Besides locking the phone, only thing I can think of is install on sd...but then you have to remember to remove the sd card when you put the phone down.
If this was a pc, I'd say install the private stuff on an encrypted volume like TrueCrypt. Not sure if there's anything like that for ppc.
This would probably work...
http://www.freewarepocketpc.net/ppc-download-freeotfe4pda-v3-00.html
But I'm telling you, it will be a real PITA to manage a setup like this. Methinks it would be easier to just get straight with the gf, but I know very little.
i tried to download the program but it said that it was not a valid ppc application any more suggestions
old_school_dave said:
This would probably work...
http://www.freewarepocketpc.net/ppc-download-freeotfe4pda-v3-00.html
But I'm telling you, it will be a real PITA to manage a setup like this. Methinks it would be easier to just get straight with the gf, but I know very little.
Click to expand...
Click to collapse
Here is a solution if you are not trying to be open with gf:
Have the program cab on sd card renamed to something that would never be used by gf, such as erasememory.cab. Use program when you need it. I don't think this will work if you are trying to use a program to keep her from finding out about other gf, you may want to use the thing from Men in Black that erases her memory.
The program from earlier, or some other virtual encryption device may work, but you may have issues due to the fact that you are running a program tied into so many others (phone, sms, etc). You may make your phone pretty unstable.
Why don't you tell her that you accidently replied to a text that sent you spam messages and you were trying some freeware program to block, or that you were getting a call from some random number that was harrassing you and you were trying this program to see if it would stop the calls. You gotta think on your feet if you are going to prevent the ***** session after she found out. Careful if she pulls the verizon/sprint bill and checks sms/calls.
if what im trying to do is not possible then is there anyway to change the icon or mask the program im up for any suggestions right now other than being honest cause I love my women
"i tried to download the program but it said that it was not a valid ppc application any more suggestions"
exe files in general are install ment to be run on the pc with the pda connected not directly on the pda!
about hiding programs then
\windows\start menu\programs and remove the shortcut goes along way
after I deleted the shortcut I tried going into my documents to open the program but it didn't open is there another way to open it also I tried changing the name of the program with this method and it worked but is there a way I can change the icon because that would be perfect thanks for your input it is much APPRECIATED and if there's anything I can help you with let me know
rsturgis0601 said:
after I deleted the shortcut I tried going into my documents to open the program but it didn't open is there another way to open it also I tried changing the name of the program with this method and it worked but is there a way I can change the icon because that would be perfect thanks for your input it is much APPRECIATED and if there's anything I can help you with let me know
Click to expand...
Click to collapse
Here is how you mask the icon.
Use total commander and navigate to Windows/Start Menu/Programs and find that .lnk file: delete it.
Find another .lnk file and copy to pasteboard. Go to another folder and paste it there (just as long as the other folder doesn't have the same link). Go into properties of that copied link and click on shortcut tab at the top. In the target field, click on File and navigate to Program Files/(DIRECTORY OF YOUR PROGRAM)/(EXECUTABLE FILE THAT OPENS YOUR PROGRAM) and click OK. Click File/Rename and call it something benign or something she wont click (like Erase Phone Memory).
You will then cut to pasteboard and navigate back to Windows/Start Menu/Programs and paste that file. You will then use that file to start the program. You could also change the name of the directory folder in program files if she knows how to navigate around in total commander/ file explorer. It will still show up in task manager as what it is though, and same goes for x button/ pocket plus.
Thanks Got It You Just Helped Me Take My Relationships To A Whole New Level
rsturgis0601 said:
Thanks Got It You Just Helped Me Take My Relationships To A Whole New Level
Click to expand...
Click to collapse
Glad to help you be so devious. Happy mongering.