Related
My old cellular phone Ericcson R600 is ale to display name of the City I'm actually in.
I would like to have the same on today screen in my MDA2.
Is it possible? Is there today plugin which can do that?
That is not possible. The 'City name' is a Cell Broadcast (CB) message sent on CB Chanell 50 - Windows Mobile can receive CB messages, but there is no special handling of specific CB messages.
is it hardware specific (radio ROM) or OS (WM5 ROM)?
It is not impossible, but such plugin is not known (till now).
It's possible to receive broadcasts (like SMS), don't disturb phone user and store information anywhere.
It is possible to retrive stored information and display on the today screen, too.
I was thinking about this plugin, but time... May be in january ...
actually, pocketmax's phonealarm plays around with "Location-based information (change profile dependent on current location!)" which I think is similar to what you are looking for: it picks up the CellID signal, but not sure what it translates into. The idea is that when you're at "work" it'll pick up on that cell tower and switch to that profile, but I don't think it gives you the "city name".
It's also an experimental addon that doesn't work on every service.
I don't need profile switching. What I need is ability to show on Today Broadcast messages from specific channels
This is possible but the app would have some problems on newer devices as the BCM messages are ignored if the header is similar (for power consumption reasons) so if you would stop the app and restart it but not switch cells you would get no CBM to retrieve info from...
But for XDA2/2i/3 it would work np.
so it's possible but no app? is it possible to write it such plugin in .Net? I don't know C++ well..
http://blogs.ssw.com.au/joehardy/archive/2004/05/26/214.aspx
Not sure if this will help you. The guy mentions home screen but I havent tried the app myself. Not sure what its compatible with.
bendog2784 said:
http://blogs.ssw.com.au/joehardy/archive/2004/05/26/214.aspx
Not sure if this will help you. The guy mentions home screen but I havent tried the app myself. Not sure what its compatible with.
Click to expand...
Click to collapse
It works on smartphones only.
there is a plugin called dktoday (its free!) that has this option...
does anyone know the cell broadcast chanell for t-mobile uk?
i have dktoday 1.80 and I don't see such option.
well this blog from msdn says it works...have you added the channel to be able to receive the info from your provider?
http://blogs.msdn.com/frankarr/archive/2006/04/05/568809.aspx
yes, i did it
dktoday seems to really slow down my 8125/wizard. anyone else see the same?
yeah, a little, and the battery meter is all over the place!
Worked on My Mini S
bendog2784 said:
http://blogs.ssw.com.au/joehardy/archive/2004/05/26/214.aspx
Not sure if this will help you. The guy mentions home screen but I havent tried the app myself. Not sure what its compatible with.
Click to expand...
Click to collapse
Thanks worked on my Mini S. With the same Code ie 50. Anyway of it being part of Today's screen?
did you read the rest of the thread??? :roll:
minty1978 said:
did you read the rest of the thread??? :roll:
Click to expand...
Click to collapse
Yeah I did read the thread. But dktoday is supposed to slow down the system. Was wondering if there is something else...
I'm using dktoday with Charmer. I have been using that since. I got the unit and it is not slowing down my phone. Charmer and Wizard is relatively the same hardware other than the WiFi and such.
Anywya, dktoday has the option of displaying lines that you need, e.g., it has 3 lines of information, you can have the choice of which line to be displayed. Try that, may speed things up for you.
UPDATE: Ok, I take my words back. dkToday DOES slow your unit down (e.g. the Today screen). Ever since I read this post, I'm trying to 'sense' the effect of dkToday. I had PocketBreeze installed and the 'slow' item on my Today screen is the PBreeze, which I presume it is because it is a heavy item. However, to my surprise, the dkToday seems to be the one causing the PBreeze (probably not just Pb, but all Today plugins). Since I had this program from the first day I had my unit, it doesn't occur to me that it is this that causes the unit to slow down (as many had complain about the slowness of OMAP processor).
I am a frequent traveller, I travel a lot between Eastern and Central Time zones.
When my PPC was on WM5 it used to Auto update the time no matter which state I used to be in.
But ever since I updated my PPC to WM6 the AutoUpdate of clock stopped working. Can someone help me out
i did find a registry entry which I used.. I do timezone tab in Phone settings and it is checked to autoupdate and still the phone is unable to update the time from network.
anyhelp is greatly appreciated
You are seriously wondering why you are not getting full functionality out of a bootlegged OS?
chichu_9 said:
I am a frequent traveller, I travel a lot between Eastern and Central Time zones.
When my PPC was on WM5 it used to Auto update the time no matter which state I used to be in.
Click to expand...
Click to collapse
I can't help with the WM6 question...but I am curious how you managed this with the WM5 OS. I have an 8125 and apparently a similar travel pattern. My device NEVER updates the time based on the network. How did you set this up when you were still running 5?
I am interested in how you got it working as well. Mine did not update once from the east coast to the west coast. Not even when making a call.
well i have a reg tweek that will change the time when you enter a diff time zone via the network...hope this is what your looking for....
Timezone and time update
In the branch HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword). Close your registry editor (no reset required) and tap START-SETTINGS-PHONE, there should be a new tab where you can automatically set the phone to get time and timezone information from the network. Really useful for me as I do extensive travelling. Tested on WM5
ugahairydawgs said:
You are seriously wondering why you are not getting full functionality out of a bootlegged OS?
Click to expand...
Click to collapse
thats why this is called xda-developers. we'll find a way to make it work.
btw how did you get the new wm6 on your wizard....is there a link..
yes, i was wondering where the wm6 rom download is also.
>> bj///////////////////////////////////////////////////
RiNo808 said:
Timezone and time update
In the branch HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword). Close your registry editor (no reset required) and tap START-SETTINGS-PHONE, there should be a new tab where you can automatically set the phone to get time and timezone information from the network. Really useful for me as I do extensive travelling. Tested on WM5
Click to expand...
Click to collapse
Yes! Its there on WM6 too!!!! Dont know if it actually works, yet to travel in a different timezone.
I have had it enabled in my registry in WM5 and WM6. It's NEVER worked for me. I change phones a lot so I'm always taking out the SIM card. When I do this, the battery comes out and it loses time/date.
I'd be curious on the details as well because I've never heard anyone that actually had it functioning!
-Mc
I tested this tweak and it seems to work when I initiate flight mode and then turn flight mode off (which will be great when I land on the plane...the time will adjust automatically).
Will this update periodically check the time to ensure it's sync'd or will this only work when the phone initially communicates with the network?
acording to microsoft list of bugs in all from aku1 to aku3 this feature never worked and they never fixed it..... since crossbow has several parts of old aku roms my guess is it does not work either..... this feature is also carrier dependent if you manage to make it work.
faria said:
acording to microsoft list of bugs in all from aku1 to aku3 this feature never worked and they never fixed it..... since crossbow has several parts of old aku roms my guess is it does not work either..... this feature is also carrier dependent if you manage to make it work.
Click to expand...
Click to collapse
My carrier supports it. My Wizard never did with the ROM hack or with Crossbow. So if it worked, I'd love to find out how! This at least makes me feel good that I'm not missing out on something...
-Mc
McHale said:
My carrier supports it. My Wizard never did with the ROM hack or with Crossbow. So if it worked, I'd love to find out how! This at least makes me feel good that I'm not missing out on something...
-Mc
Click to expand...
Click to collapse
upon doing some more reading aparently some aku3 roms now support it!!!
but in a diferent way. here it is;
Receiving Network Identity and Time Zone(NITZ) information is currently unsupported.
This feature was incorrectly documented to be supported by Windows Mobile Version 5.0 AKU3.0 in Windows Mobile Version 5.0 Documentation Release. NITZ is currently supported at Radio Interface Layer(RIL) only.
Click to expand...
Click to collapse
OK, so apparently this functionality is in fairly high demand...and since we're talking about WWAN devices, hasn't someone written an app that will periodically ping a time server (like PC OS's) and update the time on the device?
I am NOT a developer, so maybe I'm missing something obvious here. But it doesn't seem like a complicated concept for sure.
registry wizard does this
the xda-developers registry wizard allows you to make the registry tweak "show time zone s page" in both WM5 and WM6,- this put the time zone tab in phone-options, but the feature never worked for me. I called my provider to confirm if they supported it but the help desk was clueless- Would love to see if anyone got this working.
Confirmed working on my 8125 through the Cingular network. Before the hack I had to initiate a physical active sync through USB or manually change the time. Now if I go and change the time to say an hour ahead within 5 -10 seconds the time reverts back automatically.
ctgoodman said:
Confirmed working on my 8125 through the Cingular network. Before the hack I had to initiate a physical active sync through USB or manually change the time. Now if I go and change the time to say an hour ahead within 5 -10 seconds the time reverts back automatically.
Click to expand...
Click to collapse
what ROM are you using? I'm on Cingular in IL and it doesn't work here.
-Mc
Interactive said:
OK, so apparently this functionality is in fairly high demand...and since we're talking about WWAN devices, hasn't someone written an app that will periodically ping a time server (like PC OS's) and update the time on the device?
I am NOT a developer, so maybe I'm missing something obvious here. But it doesn't seem like a complicated concept for sure.
Click to expand...
Click to collapse
Here is a quote and a link to a program I found on the Cingular/HTC forum:
"How hard would it be to go to the clock settings and select the "visiting" button and select the time zone you are in?
Works for me.
There are options for atomic clock server time sync. But that won't address time zone issues.
http://zdnetasia.com/downloads/handheld/swinfo/0,39043246,39175141s,00.htm
"
I don't go out of my own time zone, so I don't really have any issues with it. The registy hack has worked just fine on my 8125.
Hello!
I was wondering if someone could please test a piece of software for me.
http://www.windsorinterfaces.com/datelens.shtml
It's a calendar-front end with an amazingly innovative interface.
It installs and runs on WM2005, BUT data entry is broken.
When you try to create a new appointment, the dates are all wrong (year is 1753!) If you try to change it to 2007, it changes it to 9998(!)
I have confirmed this fault on other WM5 handsets. The developer says it works fine for him and isn't sure what's causing the problem.
(my original post)
So if someone with W2003 is interested, please report on the following:
1) install the software
2) run the software and try to create a new appointment
3) Can you set the correct appointment date? or is it year 1753?
THANKYOU TO EVERYONE WHO GIVES THIS A TRY!!!
All the best,
Dax.
awww c'mon! Nobody will try it for me? It won't take long...
Sorry, I promise I won't be a nuissance again.
Dax,
I have tested you app on my O2 mini, and all looks good. No date issues at all. Actualy its a nice calander program.
Thanks
Richard
Thanks
Hey Richard,
Yes, it's fantastic, isn't it?
Looks like the problem is WM5 related. I don't know how to fix it, but at least we know what it is.
Thankyou very much for testing it and I'm glad you like it! (And glad it runs on your system)
All the best,
Dax.
I have the same problem with DateLens - XDA miniS, OMAP850, Windows Mobile 5.0 OS 5.1.195 (Build 14847.2.0.0)
Sometimes I get the following error:
"DateLensApp.exe
Exception
Application::Run+0xf
DateLensForm::Main+0x27"
Maybe this will help.
I like DateLens very much, not to compare with other calender-programs.
Dedis
i couldn;t install it at all - maybe its cause im using vista
Thanks Dedis, that information could be useful in working out the problem.
Thanks!
all of my OLD motorola phones seem to function as a phone/dial up modem better, and my more advanced 8125 smartphone is limited.
I have a virtual phone number for my business, and for the old moto's when someone called that number the CID would display "CALL FORWARD 407-123-4567" (it would show the number of the person calling) and when someone called my AT&T Mobile number it just displays the number. My Cingular 8125 does not do this and tech support will not help me with this issue. I can put my sim card into those older phones (and do nothing further) and visually see that someone called my other phone number and not the main (while displaying their number too).
I need to see the difference between incoming phone calls to my regular number and incoming phone calls to my virtual number (which is forwarded to my cell phone). I am so angry that by upgrading I downgrade other useful/simple functions that I have been using for years. (the other is getting my 8125 to dial my local ISP for my MacBook Pro, instead of the *99# deal listed everywhere... I can make my OLD MOTOs to dial an ISP of my choice to connect my Mac 2 the net)
These forums have helped my way more than AT&T ever has or will! Thanks a bunch guys!!!
HELP!! I to know what number people are calling me at.
I've called tech support several times on this issue and still have not found a solution other than it being my hardware. My goal is just to see a difference when a person calls my virtual phone number(forwarded to my cell) or my actual cell phone number. I can use older hardware and get this to work!
Thanks again.. this is a tuff one!
here it is:
http://forum.xda-developers.com/showthread.php?t=499338
Can you try this file?
Hi,
Please try this.
Just put it into any dir and run it. It will run at the background and you should get an icon which shows the call is being forwarded from other number.
After you MAKE SURE it works fine on your phone(no crash or other problem...), you may add a link to \windows\startup to make it auto run at startup.
I build the application for my T7272 and it works fine. But I did not test for other platform. Feel free to report bugs.
Good luck.
Kingzao said:
Hi,
Please try this.
Just put it into any dir and run it. It will run at the background and you should get an icon which shows the call is being forwarded from other number.
After you MAKE SURE it works fine on your phone(no crash or other problem...), you may add a link to \windows\startup to make it auto run at startup.
I build the application for my T7272 and it works fine. But I did not test for other platform. Feel free to report bugs.
Good luck.
Click to expand...
Click to collapse
nice! it works fine on my T7272,thank you,good man!
Kingzao said:
Hi,
Please try this.
Just put it into any dir and run it. It will run at the background and you should get an icon which shows the call is being forwarded from other number.
After you MAKE SURE it works fine on your phone(no crash or other problem...), you may add a link to \windows\startup to make it auto run at startup.
I build the application for my T7272 and it works fine. But I did not test for other platform. Feel free to report bugs.
Good luck.
Click to expand...
Click to collapse
thank you!
Kingzao said:
Hi,
Please try this.
Just put it into any dir and run it. It will run at the background and you should get an icon which shows the call is being forwarded from other number.
After you MAKE SURE it works fine on your phone(no crash or other problem...), you may add a link to \windows\startup to make it auto run at startup.
I build the application for my T7272 and it works fine. But I did not test for other platform. Feel free to report bugs.
Good luck.
Click to expand...
Click to collapse
But in my D2 does not work, there is no way?
Yes, my diamond 2 cannot work with such file yet my Touch Pro can work with.
Could Kingzao help? Many Thanks for such big Good innovation!
Hi,
I do not have a D2 so I cannot test it. However I will try to check the code.
I'd like to share the source code if anybody can help build & test for D2 or other platform.
I am using MS VSS2008 with WM6.1 SDK.
Cheers,
Kingzao
Hello,
I have the same problem (I don't know when somebody call me on my first number or on my second number) on one Samsung i600 with WM 6.5.
Can you help me? (by sharing the code maybe)
Shosho
Works perfectly on my touch pro WM6.1, but unfortunately not on Touch Pro 2 WM6.5.... anybody managed to work it out on WM6.5???
by the way, Ive been looking for this app for a looooong time... thanks
Omareo said:
Works perfectly on my touch pro WM6.1, but unfortunately not on Touch Pro 2 WM6.5.... anybody managed to work it out on WM6.5???
by the way, Ive been looking for this app for a looooong time... thanks
Click to expand...
Click to collapse
我也怀疑是wm6.5的问题，但是我刷了一个wm6.1的ROM，还是不能用！
I also suspected wm6.5 problem, but I brush a wm6.1's ROM, or can not use!
Hi Kingzao
Any chance to make it work with WM6.5.....
Thanks for a nice program .....
In my HD2 does not work too.
Hi all,
Sorry I am too busy recently.
Maybe another day I will sort the code and share to who is interseted in.
The code is based on RIL so there may have some problem with different H/W or Radio version.
Anyway, I will try to burn a WM6.5 on T7272 to test whether it is WM6.5 problem or H/W version, if I have spare time.
Cheers,
Kingzao
mj25 said:
我也怀疑是wm6.5的问题，但是我刷了一个wm6.1的ROM，还是不能用！
I also suspected wm6.5 problem, but I brush a wm6.1's ROM, or can not use!
Click to expand...
Click to collapse
can you tell me what the phone type you are using?
Kingzao said:
can you tell me what the phone type you are using?
Click to expand...
Click to collapse
Sorry,I use the Diamond2.
Kingzao said:
Hi,
Please try this.
Just put it into any dir and run it. It will run at the background and you should get an icon which shows the call is being forwarded from other number.
After you MAKE SURE it works fine on your phone(no crash or other problem...), you may add a link to \windows\startup to make it auto run at startup.
I build the application for my T7272 and it works fine. But I did not test for other platform. Feel free to report bugs.
Good luck.
Click to expand...
Click to collapse
i tryed and used,but it can't work on my c720w.i think you put the icon on desktop's status bar,but in my c720w,system create a new window to show the information,so i can't see the icon ,because the icon on another window.
how did you do this?will you pubilc the source code?
Kingzao said:
can you tell me what the phone type you are using?
Click to expand...
Click to collapse
Hello again Kingzao,
Any updates on WM6.5?
Omareo
Thanks to Kingzao for his great work.
I can try compliling it and do tests on WM6.5 platform, Touch stone.
I have sent you a message.
** UPDATE 16-JUN-2009 **
Introducing Geocasting with Inca X (Video)
http://www.ix-m.com/
GPS Website
http://www.ix-m.com/gps
Latest CAB is always available here
www.ix-m.com/downloads/livecam.cab
The app is no longer in beta.
This program seems really cool, and I was watching shogunmark's video for a second, but wouldn't this absolutely destroy your battery? Activating a 3G connection already triple's my battery drain, and GPS throws on another 200-300 mA.
Phil Bishop said:
Hi All,
We have a new version of an application, which is now available on beta and would greatly appreciate it if any of you have time to participate in the trial and provide me with feedback on whether the software works or not on your device.
In simple terms the new version of the application allows you to broadcast both an image stream and GPS data which can be viewed either in real-time or later via the Live Media Web application
Here's a quick video introduction to the software
http://www.youtube.com/watch?v=6fpQlqJROrw&rel=0
Device requirements:
Windows Mobile 6, camera and GPS (internal or external via BT)
Windows Mobile 5 + .NET CF v2 (or above) camera and GPS (internal or external via BT)
Download CAB from
http://www.ix-m.com/gps-beta/mobile/livemedia-1.5.1.cab
or visit www.ix-m.com/gps-beta from your mobile
Quick video to show you how to set-up the app on your phone
http://www.youtube.com/watch?v=76lzPUwTyHM&rel=0
Website access from your PC to view your broadcasts and published broadcasts
http://www.ix-m.com/gps-beta
Support and Feedback
Please use the contacts form on the website
http://www.ix-m.com/contact.aspx?type=7
As this is my first posting here, hopefully I've got all the html tags correct and I hope some of you have time to try this out and let me know what you think about the app.
Many thanks
Phil Bishop
Inca X Mobile
Click to expand...
Click to collapse
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
met3ora said:
This program seems really cool, and I was watching shogunmark's video for a second, but wouldn't this absolutely destroy your battery? Activating a 3G connection already triple's my battery drain, and GPS throws on another 200-300 mA.
Click to expand...
Click to collapse
This is really good app and is very promising. I have been testing for phil for a while on this. Yes it can put quite a drain on the battery, however when im driving i have it plugged into the charger so as long as i stay topped off then it does alright.
james105 said:
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
Click to expand...
Click to collapse
i had experienced this before with some of dutty's roms, if the .net isnt cooked into the rom correctly then it throws major errors like that. try re-installing netcf and see if that cures your problems!
*i will note that on some cooked roms re-installing netcf doesnt help because of the way it was cooked in.
shogunmark said:
i had experienced this before with some of dutty's roms, if the .net isnt cooked into the rom correctly then it throws major errors like that. try re-installing netcf and see if that cures your problems!
*i will note that on some cooked roms re-installing netcf doesnt help because of the way it was cooked in.
Click to expand...
Click to collapse
ill give that a shot but i doubt thats the issue cause i did a hard reset n installed it n it worked fine and then i tried using it again later on and got that same error msg again :-(
Mogul on Sprint
I've had a couple of reported problems about running the app on the Sprint Mogul, if anybody has sucessfully (or otherwise) run the app on a Sprint mogul it would be helpful to know if this is generic problem or not.
Many thanks
Phil
I have a mogul and it seems to work flawlessly. I was able to broadcast two separate feeds with gps.
Does this software work with WiFi, and cache the images & GPS coordinates, for upload at a later date?
I dont have an unliminated data plan, and uploading multiple images would require me to take out a loan
Cheers, Mike.
EDIT:
I've just gave this a try with WiFi, and it seems to work well.
GPS shows me moving from my office to my lounge, very freaky, very accurate
Just the question about the cache left.
I guess since it does "broadcasting" then it probably cant (yet?) cache the video and GPS data?
Cheers, Mike.
Mike1002 said:
Does this software work with WiFi, and cache the images & GPS coordinates, for upload at a later date?
I dont have an unliminated data plan, and uploading multiple images would require me to take out a loan
Cheers, Mike.
EDIT:
I've just gave this a try with WiFi, and it seems to work well.
GPS shows me moving from my office to my lounge, very freaky, very accurate
Just the question about the cache left.
I guess since it does "broadcasting" then it probably cant (yet?) cache the video and GPS data?
Cheers, Mike.
Click to expand...
Click to collapse
Since I posted lot's of people have emailed asking for a cache then upload option along with the ability to be able to disable the speed tracking
I've been working these today along with several other feature requests and hope to have a new build available sometime tomorrow with these updates in.
would there be a way to lock the screen while broadcasting?
diterex said:
would there be a way to lock the screen while broadcasting?
Click to expand...
Click to collapse
Lock the screen how? You can always map a button to the phone lock.
Hey phil, any chance you can do an overlay and display speed somewhere on the screen?
I am unable to add AOL buddies. I have tried to add a few buddies, even my own. But every time it says that the name does not exist. Anyone know why???
james105 said:
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
Click to expand...
Click to collapse
I am getting the same error when i try to do a broadcast. I am running "[Apr 16] Dutty's WM6.1 5.2.19209 Release [User Guide & ChangeLog in Post 2] UPDATED" which has 3.5 installed already. I tried re-installing netcf 3.5 and i get an error about memory and closing applications, to restart phone and try to re-install. I tried that and got the same exact error. So i re-flashed with Dutty's rom, as listed above, but tried installing netcf from the get go and got the same exact error. Anyone have any ideas???
Would it also be possible to have an option to enable the flash?
The camera flash light on my device is only half decent, but having it on would be a great option.
WildSioux said:
I am unable to add AOL buddies. I have tried to add a few buddies, even my own. But every time it says that the name does not exist. Anyone know why???
Click to expand...
Click to collapse
Sorry, the software isn't linked in to other IM systems at the moment. Only other Live Media users can access your broadcasts, because they need the Live Media client to be able to see what you are broadcasting.
HTH
Phil
diterex said:
would there be a way to lock the screen while broadcasting?
Click to expand...
Click to collapse
If you mean - stop the screen from going to sleep when broadcasting?
Then yes I am looking into a solution for that for handsets that don't stay alive while the camera is active.
greetings phil. very nice program. its working great on my sprint mogul.
Phil Bishop said:
Sorry, the software isn't linked in to other IM systems at the moment. Only other Live Media users can access your broadcasts, because they need the Live Media client to be able to see what you are broadcasting.
HTH
Phil
Click to expand...
Click to collapse
Hi Phil,
Yeah, shortly after posting that question I messed around with it a little bit and made a test name. Everything is working great now.
Now, anyway of making the feed fullscreen on computer?
Version Update
There is now an updated version available, with some of your feature requests in.
Record Mode
Allows you record your broadcasts with GPS offline and upload them later.
On the Broadcaster's setting screen there is a new item "Live broadcast" - tap/select and the Broadcast menu option changes to Record.
If you have a storage card, then the files are saved to the livemedia folder, otherwise under \\appData\livemedia.
On the website, login and under My Broadcasts is a new link to upload your broadcasts.
Please note this is only applicable for GPS enabled broadcasts.
Disable sending speed data
On the GPS enable/disable screen there is a new menu item called "Include speed" uncheck so speed data is not recorded.
Check for updates
From the main menu this can now be used to check for and download furture version updates.
Download link
http://www.ix-m.com/gps-beta/mobile/livemedia-1.5.2.cab