Related
I have a new AT&T Tilt and I've just installed a WIFI access point on my home/office LAN. My WIFI laptop was simple to configure as member of the Windows WORKGROUP. I've been struggling with my TILT. Some questions:
1) Is this supposed to work?
2) How do you assign the TILT to a workgroup?
3) I can see other workgroup PCs from the TILT, but I cannot see the TILT from other PCs. I am able to ping the TILT from a PC both by ip address and by device name (which happens to be "tilt").
Thanks for any help,
From what I understand you want to be able to browse phone files over wifi?
Yes. On any LAN PC, I would like to click on "My Network Places" and see the WM6-Phone listed with the other WORKGROUP computers. Then I would like to be to click on it to browse its directorys. And also drag & drop files to/from the phone. Thanks.
comet270 said:
Yes. On any LAN PC, I would like to click on "My Network Places" and see the WM6-Phone listed with the other WORKGROUP computers. Then I would like to be to click on it to browse its directorys. And also drag & drop files to/from the phone. Thanks.
Click to expand...
Click to collapse
Not sure that's going to work unless you can find some other way of connecting other than by using Activesync
I understand the "Not sure that's going to work..." part. I don't follow the "unless you can find some other way...". I'm not using Activesync (at the moment) I wish to use a WIFI Access Point to join a LAN WorkGroup. I call that "some other way". It would seem that this desire would be widely shared by the wider community of users. It's a logical thing to want to do. There are enough parameters to tweek that given the proper expertise, I would guess that you could connect anything to anything else. I just don't have the expertise so I thought I would pose the question...
As far as i know, windows mobile doesn't include a smb (file) server. You have only a client. This means that you can browse your desktops' shares from the phone but not the contrary.
Windows CE 5.0 and 6.0 actually have a smb server but i think this is not shipped with the Mobile variant.
Unless you find some 3rd party software of course (i don't know of any but i've never really looked for it).
Bye
EDIT: if you want to be able to share files in the PPC with the desktops in the network, you can install a FTP server in your PPC. Then you can use a ftp client on the desktop to browse the PPC.
Try this one: http://www.mochasoft.dk/freeware/ftpd.htm
Nice solution. Thank you.
Seeing LAN shares with Tilt
I have the same goal (to share both ways between Tilt and LAN), but some additional issues.Have had the Tilt for only one day, so forgive me for any dumb questions!.
Can't even see the LAN shares from the tilt (nor the other way around). The phone indicates it is connected to our WiFI, and other LAN PCs can see another's share \\Titan for eg., but when I type //Titan into the Tilt browser it says it can't connect to that. Any suggestions why?
I wondered if its a syntax problem. Seems the Tilt does not have a reverse slash (\), but I would think forward slash (/) should work equally well.
In some circumstances, the phone invites logging into a VPN, but we dont have one established on our LAN. Would this facilitate sharing files? Does setting one up require running a server or is a simple Peer to Peer network sufficient? If so, how do you set one up?
Once I am sure I hve a Wifi connection I will try the ftp client solution.
Any suggestions welcomed.
Thanks
Trekker451
any detailed how to guide?, i can do it, i'm fairly tech savvy, so i just need to kneed out a few things. maybe if you caould start from the beginning and i can see where i went wrong.
logmein.com works, but i want something more personal, just bewtween the computer and my phone. somerthing that looks good and scales full screen preferably.
please guys?, point me in the right direction.. all the posts just keep saying to search and there's lots of info, but there's no step by step guide.
thanks guys!
ok i got it going.
first go to the computer you want to connect to and go to control panel / system
click on remote, enable remote users
go to start menu, run. type cmd
in command write "ipconfig /all"
take note of your ip address
on your phone go to remote desktop,
computer = your ip address
username = (go to startmenu, control panel, user accounts) use one of those names.
password = blank unless you have a password.
domain = i left blank.
connect full color unless it doesnt work for you
if you can connect and you get a password error
type the error you get inot google and you should get a fix as your first link.
try that.
blam, remote desktop, it's awesome.
Nice how-to...
this is the most succinct tutorial on how to do this that I've seen. I'm still having trouble, though. I get the "Cannot connect. Likely reason are: 1 the remote comupter is not set up for this. 2. Reached the maximum number of connections. 3. A network error occurred while connecting."
I have set up the XP PC, & taken down all firewalls. I only have one user account and it has a password. I've even tried using Hamachi with one of their VPN ip addresses (awesome and free for pc2pc). I 've combed trhough my router settings too, and tried to clear everything there, too. I can RD from an XP laptop, so ti seems to be something on the unit, to me. I've also setup file sharing w/ Total Commander (it's served my purposes amply).
I really have googled & googled & googled. If anyone has any idea what is going on, I'd be grateful for some ideas.
Have you enabled the RDP on the host computer?
Right click my computer
Properties
Remote
Then enable allow user to connect remotely.
Will only work on XP Pro, or Vista if you choose to allow older clients which they scaremonger you against by saying it's less secure.
Danke!
I've been scared away from Vista for the usual "new" OS reasons, but perhaps it's getting to be time for me to haul my old conservative back-end into the modern world.
Thanks so much for taking the time!
(and to Biohead: yes, I followed the instructions I lauded so vehemently.... ???)
you're running vista?
and you haven't been able to connect still, right?
sorry i could walk you through xp, but man vista sucks, i wouldn't touch it with a 10 foot pole.
i'm setting up remote desktop on my iphone
hahaha totally referred to this guide
and it sucks, so i'm sticking with vnc
man, i miss my exec/universal
dutchschultz said:
any detailed how to guide?, i can do it, i'm fairly tech savvy, so i just need to kneed out a few things. maybe if you caould start from the beginning and i can see where i went wrong.
logmein.com works, but i want something more personal, just bewtween the computer and my phone. somerthing that looks good and scales full screen preferably.
please guys?, point me in the right direction.. all the posts just keep saying to search and there's lots of info, but there's no step by step guide.
thanks guys!
Click to expand...
Click to collapse
Hope this helps
http://forum.xda-developers.com/showthread.php?t=366312
http://forum.xda-developers.com/showthread.php?t=294524
orb3000 said:
Hope this helps
http://forum.xda-developers.com/showthread.php?t=366312
http://forum.xda-developers.com/showthread.php?t=294524
Click to expand...
Click to collapse
you, my friend, are awesome
A possible solution for those of us on T-Mobile's standard web n walk
Sorry to resurrect this thread, but I thought I'd post my experiences here in case anyone else (like me) searches for a solution to enabling RDP on T-Mobile (UK at least).
I was having the same problem with remote desktop, it saying that the server was not available. I phoned up T-Mobile's helpdesk as recommended here and after getting past first line support (who didn't know what remote desktop was, and tried sending new connection settings to my phone to resolve the issue) I got through to someone who knew what they were talking about. Turns out that I'm on T-Mobile's "basic" or "handset-only" web-n-walk package, and it's not possible to use RDP on this. I assume they block the relevant ports. They told me that I could pay an extra fiver a month to upgrade to a version of web-n-walk which can handle RDP.
Well I told them I would think about it, but instead tried to find a way around it as the one or two times I need to use RDP are certainly not worth a fiver a month. My solution is probably only suitable for the more techy of us, but without much work and with no prior experience I managed to set up a SSH tunnel using FreeSSHd as a server running on my windows server (although a normal windows box should work fine - http://www.freesshd.com/) and zaTunnel as a client on my phone (http://www.zatelnet.com/zatunnel/main.php). Both programs are free.
Basically my phone takes all RDP connections and tunnels them over SSH to my windows server, which then turns them back into RDP connections. T-Mobile have no idea I'm using RDP, and if they block the SSH port in the future I can always change FreeSSHd to run on port 80 (for web). This will also work for other protocols T-Mobile might be blocking (FTP springs to mind).
Just thought I'd post this in case anyone was in my situation of needing RDP on their standard web'n'walk.
Edit Sorry posted this in the wrong thread! Will leave this post up however just in case someone finds it useful
echolock
Many thanks for the above have been searching everywhere for a fix to this. I am the same as you T Mobile (UK) and can't connect.
Could you give some additional advice as how you got the RDP to work.
For the record I can connect by Wi-Fi and by using a PAYG sim from a different carrier. However, I am on a contract with T Mobile and don't want to carry a different sim just to use the RDP.
I have installed both apps. I can make a connection from zaTunnel on Port SSH:24 to the freeSSHD server (SSH - listening on port 24). Other than adding a User and changing the default port to 24 there are no other changes I have made in freeSSHD.
Under the connections tab in zaTunnel I have left Network: Automatic with the other settings relevant to make a connection.
Under the ports tab of zaTunnel I have
LP> 3389,
IP/URL . IP of the desktop I want to connect to of 192.168.1.10
>RP 3389
When I the start the Remote Desktop app under my Windows Mobile 6.1 it indicates connecting the fails as before.
Also forgot to mention freeSSHD is running on the desktop I want to connect to.
Sure thing.
When you run Remote Desktop under Windows Mobile, make sure you connect to "localhost" NOT to the IP of the desktop you want to connect to.
Your other settings seem correct to me.
To attempt to explain a little, basically what happens is as follows. For simplicity's sake I will have three machines, your phone, your SSH server and your RDP server (although the latter two can be the same).
On your phone:
1) Remote Desktop connects to localhost on port 3389.
2) zaTunnel is listening on localhost on port 3389. It echos all commands sent to this port out on port 22 over your cellular connection to your SSH server, also providing details of your RDP server and port.
On your SSH server:
3) FreeSSHd receives the commands sent over port 22 and is told by zaTunnel to convert them to commands sent to your RDP server using port 3389.
On your RDP server:
4) Remote Desktop receives a normal RDP request over the normal port from your SSH server.
5) Responses are sent to your SSH server.
On your SSH server:
6) FreeSSHd receives the RDP responses, and sends them back to your phone over port 22.
On your phone:
7) zaTunnel converts the commands sent over port 22 back into RDP commands sent over port 3389.
8) Remote desktop receives a response from zaTunnel and thinks it's connected directly to an RDP server on localhost. In actuality it's connected to your RDP server using an SSH tunnel provided by zaTunnel and FreeSSHd.
Hope this makes sense, I'm not very good at explaining this!
Ah found another problem. The IP of your desktop you say is 192.168.1.10 - this is a local IP address so will only work on your local network.
Go to a website like http://whatismyipaddress.com/ from the machine you run SSHd on to find out what your current "external" IP address is. Bear in mind that most home broadband connections have a "dynamic" address which is allocated to you and might change from time to time - you can always use something like http://www.dyndns.com/services/dns/dyndns/ to set yourself up with a static hostname, and run a program on your machine which updates your hostname with the correct IP address every time it changes. Some routers have this functionality built in.
Thanks for the quick response and explanation.
Between posting and reading your reply I had worked out the RDP app needs the localhost or the IP 127.0.0.1.
I had come back here to post, so others would know in future.
Your other point you raised about the desktop IP. I have used this only in the ports tab on zaTunnel. The connection tab has a proper mydomainname.com address. (Provides email and a webmail interface).
Anyway, can connect now and thank you again in solving this for me. (If your in Leeds I will buy you a beer).
Ah yeah the 192.* address would work on the ports tab, fair enough. Might be worth pointing out if others read this that this is only the case if the machine you're trying to RDP to is on the same local network (or the same machine) as the machine you have FreeSSHd running on.
But good to hear you got it working Now hopefully T-Mobile won't cotton-on and decide to block port 22 too...
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
homiedaclown said:
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
Click to expand...
Click to collapse
a few thoughts,
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
2. do you have a password setup on the user account that you log into windows on if no remote desktop will not allow access.
3. when browsing from a 3rd party network ( e.g mcdonalds or over GPRS/HSDPA ) you browse to your external ip not the dark ip of 192.168.1.x i use dyndns.org so i can just browse to the dynamic domain ip which is my external ip of my home pc
4. since you mentioned a dark ip i can only also assume your using a router at home. this means you either use such as LogmeIn/Hamachi and browse to the home pc's Hamachi IP ( e.g 5.5.100.50 ) or you will have to set a port forward in your router to forward any requests from port 3389 to the local IP of the home pc, ( e.g 192.168.1.100 )
I use static ip's in my router at home to ensire that the port forward will always goto my home pc's internal ip address. My particular router from netgear allows to have the ip of a specific machine be assigned the same ip internally based on it's ethernet adapter MAC address. making no changes required on the pc itself other them standard DHCP.
hope this helps.
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
1. I am using Windows XP Home. I have allowed Remote Access under the tab Systems Tab.
2. I only have a pw on the prog VNC server on the pc but no passwords for windows *should I? :| ... Then I try VNC Viewer the the Pocket PC *T-mobile Wing.
3. I am reading up on the dyndns.org site. I assume I need the free dns service for those with dynamic IP addresses. *i hope I have that.
4. I have Linksys Bef11s4... I believe I can set static ip's though its tricky for me. I am going to try for the pc I want to connect to. This networking stuff gets a little bit blurry for me. I understand that static means non-changing, therefore the pc to connect to in network will have same ip on restarts and things. I am familiar with the port forwarding options *do i need tcp and udp checked?... again any thoughts definately appreciated...
lastly, Do you have any particular progs you recommend for me to do this concept? I have a few installed, but not sure i need all.. I have pocketputty on pda and wm6 rdc... plus vncvier. On the PC i have VNC CLient and VNC Server *believe I only need server. Thank you for your time Cyberjak
1. Just go to http://www.logmein.com
2. Sign up. It's free.
3. Screw Remote Desktop and juggling internal vs. external IP addresses and DNS.
4. Use/enjoy...no work needed.
MJB
Logmein has like 6 choices... I am looking to remote access outside my network... also is this free? I see trials and stuff... thanks for help mjb
have the logme in installed on main and when i use pda it doesnt work...i installed cab and log in fine but when i go to remote the pc it takes my access code and then pops up with error message for menuPDA.html... i cleared history and cookies and tried to make sense of the forums... I am using the T-mobile Wing with WM6.... wierd... willing to try the other way if needed... i guess i could also try loggin thru a pc not home to the remote pc... i believe i saying this remote term correctly but i believe u understand. I am trying to use my PDA anywhere to control home pc.... thanks for help guys... i am willing to try whatever way works...
I've used Logmein on my MDA Pro, Ameo and now on my Vario 3.
You should first try to remote your PC while your sitting next to it. That way you can see any firewall pop ups that may be blocking you.
I have been trying when i am right next to it... I am using my WM6 to connect wi-fi to the internet thru my network.... the pc i wanna control is on my network...
It doesn't matter what network the PDA and PC are on. Logmein uses an internet connection.
yeah, tried a bunch of things to get logmein to work, and it always comes to the page of "403 Forbidden (0x5) menuPDA.html System error: Access is denied. (5)"
checked their forrums too...
guessing i should try going back to client/server manual entry... either way, any advice from you guys much appreciated.... It seems WM6 are known for incompatibility issues with RDC situations.... hoping not the case but...thanks again guys
got logmein working nicely, thank you for the help guys...
Gooer Remote Desktop Service
I am using Gooer Remote Desktop Service(http://www.gooer.com) and it let me access my home PC using laptop or mobile phone.
remote desktop only works, as far as I know, on XP pro & Vista
http://forum.xda-developers.com/showthread.php?t=357009
I posted this in network forum but I don't think anyone reads that forum so I thought I'd try my luck here....
I'm trying to connect to a network share that is on a domain controller so uses domain level security/authentication instead of regular local computer authentication. When I try to connect to the computer I get an Action Failed message "Cannot connect shared path. The specified network resource or device is no longer available."
I checked through event logs on the server and it looks like the login/authentication went through just fine but the wm device seems to be rejecting it somehow....
Does anyone know what I might be able to do to fix this? Kind of a pain, I would like to be able to connect to my server's shares.
Thanks
and again no one replies
*cry*
How are you attempting to connect to the server shares?
Using what method?
PocketLAN?
I.E.?
Even though you authenticate against AD there should be a local administrative account on that box, try logging on using it. Also what are the permissions on that share, do you have access to it and is your account part of that domain?
Just my $.02 try using z2 PocketLan..
I've used it for quite a while on my Axim, and now on my 6800.. It allows you to connect to a network share, you supply it with your login credentials (Active Directory) and save the connection. It also comes with a bunch of other handy stuff like an IP range scanner, ping, yatta yatta ..
-=<> Aaron <>=-
I use Resco Explorer and it doesn't seem to have any problems at all connecting to network shares on our domain controller at work.
i just tried on my domain, i can connect to shares on other pcs and servers, but not on the DC, maybe theres a setting that doesnt allow connections from non domain members
and just FYI, domain controllers dont have any local accounts
ya no local accounts... local computer accounts work fine but it won't connect using domain accounts to authenticate...
I'm not sure if this is a setting on the DC for authentication or if there is something I need to do on the wm device?
Zenoran: You still haven't told us how you're trying to connect. I can't tell you how to do it unless you tell me what sort of program you're using, or whatever. Capiche?
I use z2 PocketLAN without issue, accepts DC auth no problem. Do you use PocketLAN?
ryanshepherd said:
Zenoran: You still haven't told us how you're trying to connect. I can't tell you how to do it unless you tell me what sort of program you're using, or whatever. Capiche?
I use z2 PocketLAN without issue, accepts DC auth no problem. Do you use PocketLAN?
Click to expand...
Click to collapse
Oh sorry! Using Resco File Explorer... are there others I should try? I bought that program because it seemed to do everything. Will give PocketLAN a shot.
hmmm tried pocketLAN and it only locks up when I try to click on that server... bad bad...
something really fishy here because even non-authenticated user should be able to browse that server and see public shares... no one else have issue? maybe it's a server 2008 thing?
I noticed on DCDs new verision that has windows mobile 6.1 , that it has an icon under Connections called "domain enroll"
bhagwan said:
I noticed on DCDs new verision that has windows mobile 6.1 , that it has an icon under Connections called "domain enroll"
Click to expand...
Click to collapse
lol ya... that's a wm6.1 thing.. ive never been able to get that to work either. no posts for it as well that i could see... i guess no one does much domain integration with their titans?
Zenoran said:
lol ya... that's a wm6.1 thing.. ive never been able to get that to work either. no posts for it as well that i could see... i guess no one does much domain integration with their titans?
Click to expand...
Click to collapse
the domain enroll is a bit of an odd thing, i cant even find much documentation on it from microsoft, but from what i can tell it just integrates with an exchange server, provided the server has mobile device manager installed
im not even sure what features it enables
For those that use Orb to stream media to their phones, what is the maximum.speed you have been able to stream? Using the speed test, I get 450kb/s...is this due to my internet connection or the phone?
If you do not use orb...what other program do you use to connect to your pc?
I have a dynamic ip address, and have yet to find a way to connect via remote desktop...I have gotten answers, but they're like "just use this" with little to no explanation on how to go about connecting...
telegraph0000 said:
For those that use Orb to stream media to their phones, what is the maximum.speed you have been able to stream? Using the speed test, I get 450kb/s...is this due to my internet connection or the phone?
If you do not use hulu...what other program do you use to connect to your pc?
I have a dynamic ip address, and have yet to find a way to connect via remote desktop...I have gotten answers, but they're like "just use this" with little to no explanation on how to go about connecting...
Click to expand...
Click to collapse
Hey!
I use Orb very often and usually just set it to the standard 380 or whatever the highest speed is that can be selected on the webinterface. Never really bothered trying a faster setting because the increase in quality wasn't really noticable!
Referring to the dynamic issue problem you have: How is your internet connection managed? Do you use a router? And if yes, which one? The one I use supports DynDNS (www.dyndns.org): On the website, you create an account and a host domain (in the shape of: whatevernameyouwant.serveftp.net). Whenever you open that domain, DynDNS will forward you to your current IP if you configure your router to update the current IP at DynDNS whenever the IP changes! Works great! This way I can access my PC to do some remote desktoping whenever I'm not home by connecting to my domain!
You can take this whole thing one step further: Since you can only connect to your PC when it's awake, you usually have to leave the PC on, which kinda sucks. But there is a solution to this: You can let the PC go to sleep after a few minutes of not being used and wake it up again remotely by sending a WOL magic packet: http://www.dd-wrt.com/wiki/index.php/WOL (Don't worry, it sounds complicated at first, but it's not that difficult... What happens is this: You configure your network card to wake the PC whenever a certain kind of data package arrives. Now, when I'm not at home, I just send that WOL package to my DynDNS-Domain, which forwards it to the current IP of my router, which in turn sends it to my network card and voila: My PC wakes up and is usable!)
EDIT: Don't hesitate to ask me any questions you might be having! And you definitely will have to be patient! Since there are so many elements involved, it takes quite alot of trial and error until you get it working!
I tried to use orb but i couldn't get it work.
I use internet explorer on my hd, and when clicking on the video to watch windows media player opens and got an error saying the video cannot open or something like that.
Orb works using a PC, so I assume it is good configured.
What is the way to see a video using orb in my HD?
thanks
hectorzin said:
I tried to use orb but i couldn't get it work.
I use internet explorer on my hd, and when clicking on the video to watch windows media player opens and got an error saying the video cannot open or something like that.
Orb works using a PC, so I assume it is good configured.
What is the way to see a video using orb in my HD?
thanks
Click to expand...
Click to collapse
I use Opera Mini. When I click on a file, I'm asked if I want to save or open the file. I save it and open it using CorePlayer!
Maybe that's the issue: Are you using WMP? Maybe the windows media player doesn't support the streamed format! You could try changing the format in the settings of the Orb web interface!
I got to the part where I locate my routerv (using verizon fios' standard wireless router) and then an alphabetical list of programs and games comes up...yeah...stuck...
telegraph0000 said:
I got to the part where I locate my routerv (using verizon fios' standard wireless router) and then an alphabetical list of programs and games comes up...yeah...stuck...
Click to expand...
Click to collapse
I don't understand where you're stuck! Please tell me, what you did!
Okay...not necessarily stuck, just confused...page is asking me to choose a program to forward...
Screen with an alphabetized list of programs...which do I choose to connect to my pc?
Thank you once again...
telegraph0000 said:
Okay...not necessarily stuck, just confused...page is asking me to choose a program to forward...
Screen with an alphabetized list of programs...which do I choose to connect to my pc?
Thank you once again...
Click to expand...
Click to collapse
I'm still confused... Where is this list from? Are you trying to enable port forwarding in your router?
yes. this is from here:
http://portforward.com/
selected Actiontec MI-424-WR
telegraph0000 said:
yes. this is from here:
http://portforward.com/
selected Actiontec MI-424-WR
Click to expand...
Click to collapse
What are you trying to enable port forwarding for? For Orb? I don't think, you have to do anything for Orb to work!
EDIT: It seems I'm wrong, you might have to open a few ports... Check these articles: http://support.orb.com/kb/entry/118/ and http://support.orb.com/kb/entry/121/
Since I don't have your router, I have no clue how to manually set up port forwarding...
I guess my topic went another route when you mentioned the fact that you were able to connect your hd to your home pc through a dynamic ip address...
I am able to browse my pc through orb...
what I wanted to know.was how to be able to connect the HD through remote desktop. I created the account, but, unfortunately don't know what steps to fuether take threreafter to successfully create a remote desktop connection.
I see that remote desktop asks for "computer"--what ip address do I type in there?
got the user, password, and domain...
telegraph0000 said:
I guess my topic went another route when you mentioned the fact that you were able to connect your hd to your home pc through a dynamic ip address...
I am able to browse my pc through orb...
what I wanted to know.was how to be able to connect the HD through remote desktop. I created the account, but, unfortunately don't know what steps to fuether take threreafter to successfully create a remote desktop connection.
I see that remote desktop asks for "computer"--what ip address do I type in there?
got the user, password, and domain...
Click to expand...
Click to collapse
Ah! Good to know that you're trying something completely different... That makes helping you alot easier!
To be able to use your PC with dynamic IP from outside you have to use DynDNS as mentioned above! Go here (http://www.dyndns.com/) and create an account. Then, create a domain (for example: telegraph0000.serveftp.net). Then, make sure DynDNS gets updated, whenever your IP changes. There are different ways to implement this: If your router supports it, you can have your router do the updating for you. If it doesn't, you can download little apps that take care of that (DynDNS offers its own client: http://www.dyndns.com/support/clients/).
When DynDNS works, you can just enter your domain into the "computer" field of Remote Desktop!
To be able to use Remote Desktop, you have to forward the TCP port 3389 in your firewall.
Try this one..you can download the programm,and it does the job for you...works great here.
http://www.simpleportforwarding.com/
regards stef