Can't install the driver for my Xda2 with WM2005 1.60b and Activesync 4.1
Tried uninstalling and reinstall activesync but still not working. Always getting the message "missing an entry. INF was created for Windows 95 or later".
Tried all the methods i can find in the forum but still not working, anyone knows how to solve this?
have you tried 1.60c ?
That i'm gonna try real soon since without any solution..
Tried 1.60c but still the same problem.. appreciate any help..
Got a new laptop and it solved the problem...
The device was detected and recognized like a charm. From my testing with a few pc i would say the problem would be most likely due to the inability of the older pc hardware (could be those using USB 1.0) to recognize the device.
Tried with 4 pc with diff config for this
Dear all, this mornig I can't async my mini. It says cannot connect due to error 608. Any ideas ? Soft reset does not seem to work. Thanks.
have you installed a wifi card ??? I had such a problem when I was trying to setup my Spectec Wifi card...
Yes, I did install a wifi card which worked for about two days. Then there were some problems which led me to install the modified E300 Socket driver (I am not mistaken). It worked fine for about two days till the latest problem. Managed to solve it by doing a hard reset.
As far as wifi I am using the spectec driver for dopod version 1.24.2. Its only been a day, hopefully it works. The universal is not on these shores just yet... :lol:
Yes, I did install a wifi card which worked for about two days. Then there were some problems which led me to install the modified E300 Socket driver (I am not mistaken). It worked fine for about two days till the latest problem. Managed to solve it by doing a hard reset.
As far as wifi I am using the spectec driver for dopod version 1.24.2. Its only been a day, hopefully it works. The universal is not on these shores just yet... :lol:
read more: http://www.softick.com/news.html#83
Re: Softick Card Export II version 2.11! Now working on Wiza
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Re: Softick Card Export II version 2.11! Now working on Wiza
bolasz said:
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Click to expand...
Click to collapse
It works for my 838.. I have lockup and unable to switch to SDcard mode only if I connected to my PC and activesync once and unplug. But that seems to be the activesync issue in my 838 which fail to free itself from unplug from PC. So it cannot switch to SDcard mode..and prompt me an error message.
I have already switch to AS4.1 but does not improve my situation.
What is Microsoft doing here?? :roll: A soft reset is the only way to get my device syncup again.. :x
I own this program since I had my XDA mini ...
finally I can use it again to copy some files to my pda and use it as a memory stick...
I also noticed some problems:
1. after I connect the USD cable and the PC recognized my pda as a memory stick, Windows XP asked me to make a reboot in order to be able to use the new 'harddrive'
2. after I copied a .jpg to my pda it looked like the storage card is no longer recognized by WM5. The icons of the shortcuts to programs I installed are missing and I cannot browse with TotalCommander to my storage card.
After disconnecting the USD cable, my storage card could be found again - is this a bug or a feature?!
After the first connect in mode 'Card Export' I switched to 'Active Sync' and the synching went on without any problems.
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
This looks also to me like an incompatibility between card export and active sync.
Hmpf ... rebootet the phone and connected - voila - my Wizard was again properly verified as Memory Stick and I again could upload another .jpg to my device.
It looks definately unfinished ... but it is working quite acceptable to me, though there is a lot room for improvement, it will get the job done, if I need a memory stick 'on the go'.
My device is a HTC Wizard, O2 german.
i may be wrong on the second point, but activesync alters a file when you transfer it to the pda,
so if you transfer a file to the card (even using a card reader) then put the card back in the pda wm5 will not recognise it properly.
point 1 should only happen the first time of detection.
have no problem with my XDA II...
Chris09 said:
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
Click to expand...
Click to collapse
I am experiencing the same... Please update this topic if you'll find a solution.
i'm having the missing dlls dialog problem too.
I noticed that once you activesync'ed, you can't switch to card mode and need to reboot the device.
However, mine can't seem to work anymore. It won't even switch. But I also tried disabling my today's screen (pocket plus and pocket breeze) and it works... but only the icon manage to change. My PC can't detect it as a mass storage device though.
Any luck?
Mine is working fine, I got that dll message once but a soft reset fixed it.
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
eilz said:
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
Click to expand...
Click to collapse
Same here too!! using ver 2.12
ver 2.11 worked fine with me, so most probably I will downgrade to it now.
I emailed the tech support and waiting for their reply. I will post it here in case I get anything new.
I just tried v2.12, and it didn't work. I found v2.11 on some download site, and installed it. v2.11 worked fine on Qtek's 2.8.7.1 ROM.
I cant get this to work either using 2.12. I get the device manager problem as mentioned previously. Does anyone know where can i get 2.11 from?
found it here:
http://www.softick.com/files/CardExportPPC211c-softick-en.zip
but i get the same problem
You can find previous versions in the "download" section on the left.
I'm having the same issues, used to work fine with 2.11, then it stopped being able to write but could still read (this is on my Mac), and now with 2.12 I can't even get the thing to mount. I'm talking with the developer to see if we can get a fix.
Any 2.12 and 2.11 not working for me... My computer and three others shows me message that they don't have drivers
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
pewe said:
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
Click to expand...
Click to collapse
I'm a bit confused regarding their reply.
You asked a question about the Wizard and they replied saying they are waiting on delivery of HTC Universal to examine it better. I'm not sure what the Universal has to do with compatibilty for the Wizard as they are completely different devices with different hardware. (Mybe i'm wrong and the hardware components that Card Export uses is actually the same on both devices)
Puckster -
I noticed this on second look, and asked for clarification.
just want to inform everyone that there is a free alternative. it's similar to softick card export that it turns your device into a plug-and-play card reader. it's called wm5torage (yes, the number '5' is the letter 'S')
http://forum.xda-developers.com/viewtopic.php?t=45411&highlight=wm5torage
it does not have the system tray icon that enables you to switch between activesync and export mode, but rather you open the app in your accessories folder and activate/deactivate it from there.
but hey, it's free and it works
Hi,
I have a Dopod 828+ upgraded to NL1.13 ROM +1.13 Radio + Big Storage. Tried to use my Spectec WIFI card(802.11b) with spectec drivers(SDW 820 for PPC 2003) but without success as it could not detect any network at all. Found another driver, mod E300 driver & wifi companion, in this forum and tried using it as well but it still give me the same problem. When i uninstalled my original spectec drivers, i have also completely remove the registry string as well. Am i missing out any more steps? Any advise?
Alex
Hi everybody,
I own a HTC P3600 (under the S300+ brand) and despite a lot of attempt to setup a bluetooth connection it seems that the hardware is not recognized at all.
I have the message "there is no bluetooth hardware installed" and each time i check the BT box "activate BT" when i switch back to the activaton tab the option is unchecked. When i try to scan other devices i have an error message "problem with the bluetooth hardware"
I thought i could find a software that could verify the hardware configuration like the one we have on win XP or a driver i could install over the actual configuration but i didnt find anything.
At first the internal GPS didnt work as well but after i flashed the OS with the original OS version + the radio extension V1.48 it now works fine. However i would like to use my external BT GPS (sirf III) which is more accurate and efficient.
I'm really desperate and dont know what to do to activate the BT.
i tried hardware and soft reset, even an OS upgrade (WM6) without results.
If anyone has an idea of what i could do to test the hardware to verify if the BT is dead or if its related to a software problem.
Just one more bump and if nobody has any idea well then i give up..
dijou31 said:
Just one more bump and if nobody has any idea well then i give up..
Click to expand...
Click to collapse
Hello:
I m having the same problem with the bluetooth, i tried to turn on a a message " error bluetooth hardware". Whata did you do to fix your problem.
i apreciate a lot your help.
thanks
i have a i mate no bluetooth
no bluetooth hardware after replacing backup bat tried rom up load no go hard boot any ideas.
I have the same probleme, do you have any idea Please ?
JeremaX said:
I have the same probleme, do you have any idea Please ?
Click to expand...
Click to collapse
Try upgrading/reflashing you Radios.
same problem after a backup restore. Hardware error radio 1.56.70.11
Hi, i've discovered that is a registry problem but i don't know what is the wrong key to repalce it