Cradle Sync - Device Not Recognized - MDA II, XDA II, 2060 General

Can't install the driver for my Xda2 with WM2005 1.60b and Activesync 4.1
Tried uninstalling and reinstall activesync but still not working. Always getting the message "missing an entry. INF was created for Windows 95 or later".

Tried all the methods i can find in the forum but still not working, anyone knows how to solve this?

have you tried 1.60c ?

That i'm gonna try real soon since without any solution..

Tried 1.60c but still the same problem.. appreciate any help..

Got a new laptop and it solved the problem...
The device was detected and recognized like a charm. From my testing with a few pc i would say the problem would be most likely due to the inability of the older pc hardware (could be those using USB 1.0) to recognize the device.
Tried with 4 pc with diff config for this

Related

Qtek S200 Active sync not working Drivers needed

Hello all,
I have bought qtek S200 recently and i have spent a lot of man hours trying to get this thing to sync with my desktop computer. it works fine with my laptop however doesn't want to sync with my desktop.
I get an new hardware wizard when i plug my pda into the USB requests for me to point to the drivers because windows was unable to find drivers.. I have gone through troubleshooting steps where disabling firewall / ant virus. Uninstalling active sync reinstalling / downgrading active sync and upgrading no luck. doesn’t matter if i try 3.8 or 4.2 it doesn't want to recognize my device and asks for the drivers.
i have windows xp with service pack 2 installed. so at this point i am wondering if someone has the driver files for it ? or what should be next step, any help would be appreciated.
Don't even try with activesync 3.8. It doesn't support WM5. Use 4.1 or 4.2...
Can't help beyond that...
I tought I had tried everything as well, when I found this utility over at Modaco (apparently included in the latest Dopod ROM).
Install and switch from RNDIS to Serial using the program and voila - worked like a charm for me!
Hope it helps!
After fighting with this device and my system for about 2 weeks. i noticed that my system had become so unstable that it wont' accept any new hardware. I tried installing a new 3COM network card and mostly 3com NIC's dont' require drivers however my system poped a window stating can't find drivers and put the device in system not working properly status.
so then i decided to format my computer and after the format, installed service pack 2 for xp and tried ACTIVE SYNC. without a problem it worked fine.

Universal not able to connect to the PC for SYNC--urgent PLZ

I got the new SPV 5000 as upgrade on orange and the first thing i did was unlock it using the bootloader by BUZZ from this site. Once i unlocked the phone, it works fine, everything is great. But when i try to connect it to the PC, it gives me an error, saying download Active sync 4.1 for it, I downloaded the latest 4.2 and tried to connect my universal to it, but it isnt able to connect, i dont know why..
sometimes it just gives me an error and says, check/report error and does all the status reports and stuff, but still not luck. I connected once and then when i clicked the explore button everything was blank, cant see my device or folders and nothing at all.
Please help me if someone knows the solution to it.. Cheers
Do you have another PC with which to try it out? Maybe the activesync installation or the USB drivers got corrupt.
Also, try syncing thru Bluetooth if your PC has BT. This might isolate the problem.
hello Jorgee, thanks for the reply, Yes it did work on the other PC, so does it mean that my current Pc's USB drivers are corrupt, coz the other day my USB TV stopped working on this one too. hehehe.. any solution to this PC problem
cheers mate
I find that if I'm connected to work using the Cisco VPN Client then ActiveSync won't connect, not really a big deal I guess but annoying all the same!

Help me connect with pc

Hello, my friends!!
I've a problem and i'm hopping you can help me resolve it!!
Today i installed in my pc the new activesync 4.5, but i0m unable to make a connection between my S200 and the pc!! It just isn't recognized by the pc and it does'n syncronize!!!
Can anybody please help me??
Thanks in adcvance!!!
Ensure your network to the phone is not firewalled. In ZoneAlarm you have to change the phone network to "Trusted" zone.
V
Install this and try RDNIS or Serial
Hello and thanks a lot for the solutions you posted, but i have another problem!!!
When i try to install this software you gave me, my ppc simply refuses it because it says tha there is no digital signature on the program!!
Can anyone help me install this software??
Is there any way to overrunn this error message??
Thank you!!
@vijjay
I even tryed to connect it with the firewall disabeled, but i still can´t connect the ppc to activesync!!
Any other ideas??
Its weird, but usually any PPC can accept that software, tried it before with my Himalaya, Wizard and now my Prophet and all i did was install it and begin to use..
However, that error message usually happens when you have an Application Unlocked device, you can try to de-cert it first...it is really weird as i know, it only does happen with Smartphones..
Hello
This may appear crazy, but it worked for me unintentionally of course. I had given up on being able to sync via Activesync and was looking for a solution to backup my contacts before hard resetting my phone.
I had a permanent 'Synchronization Error', I just tried a piece of software posted here
http://forum.xda-developers.com/viewtopic.php?t=63479
This software is designed to backup contacts, but when I ran it FIXED my 'Synchronization Error', I don't know how or why, but my phone is now working with Activesync, maybe it will fix your problem too.
It won’t do any harm to try it, as all it does is create a backup of contacts.

Syncronize S200

I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h

unknown device

Hi
I have some problem whit synchronizing my p4350.
everytime when I connect my phone to my notebook (usb) vista says that he has found a unknown device.
I already reinstalled windows mobile center (2x) (with rebooting).
But my notebook still doesnt find my phone.
This is really annoning.
I am using the touch-it rom
Could someone help me?
greetings
Try changing the USB Port you use.
Also download and install the latest Windows Mobile Center v6.1 from Microsoft and try again.
Regards
also these 2 things doesn't work
anyone??
?
I still trying to connect my p4350 to my notebook but it just doesnt work.
I tried another pc and that worked :S
I also tried severel usb ports but they all give thesame alert, that my device is unknown :S

Categories

Resources