make sure your registry looks like this:
[HKEY_LOCAL_MACHINE/Drivers/BuiltIn/WaveDev]
"Prefix"="WAV"
"Dll"="wavedev.dll"
"Index"=dword:00000001
"Order"=dword:00000000
"IClass"="{A32942B7-920C-486b-B0E6-
92A702A99B35}"
good luck :lol:
here is a registry fix too( automatic ), just import and your sound works :wink:
Any idea what these settings actually do?
The only one that is different from my device is "Order", which is 2, not 0.
FYI, as was referenced in another post, connecting and disconnecting the headset does seem to reset sound speed problems.
- Justin
the file is NOT for sound speed or any adjustments. it is a backup of the wave registry settings. if audio is not working at all, this will fix it.
Related
Hi all,
The audio on my Jam (predominantly the output from the built-in speaker) was driving me a little nuts. I was getting stuttering and clicks in programs (games), in movies (WMV) and using the phone. Also, there was a lot of stutter in the notifications for incoming calls and SMS.
In attempting to resolve this, I noticed that GB-SOFT Tweak (http://www.gb-soft.cz/XDAII/products.htm) had an
interesting setting "Higher priority for audio media". I turned on this setting, soft reset, and Wham! sounds are as
smooth as butter globally. I haven't had any noticeable negative side effects, just better sounds.
I looked into what the GB-SOFT utility is doing, and it seems to just be setting one registry value:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev\Priority256
from it's default
0x100 (256) to
0x80 (128)
This apparently gives the built-in sound processing DLL (WaveDev) a higher thread priority and eliminates the skipping sound.
Can some of you guys try this out (either via the GB-SOFT utility, or manually in the registry), and confirm your results?
This got rid of one of the most annoying problems for me with my Jam (A great device).
YMMMV
I've just changed it to 80 and i'm going to do some tests tonight. I'll post again with the results...
Well, i've tested it and i found that while it does a lot of improvement on the sounds played from the back speaker (media player, ringtones etc.), it doesn't improve at all the audio quality from the front speaker. (I called a couple of friends...but it was still the same, robot, voice quality)
For the tests i went up to 500 (terrible audio, full of clicks and tsiks) and down to 20...
I'll continue the tests.... :?
Hi,
Good thing ! Thanks for the test
On my MDA Compact, the Priority256 key has the DWord value 110 (0X00006E). So I have no idea how to change the setting to 0X80 (128). Anyone know how to do this? I am interested in testing the results.
Using a registre editor like regedit I think.
I am using PHM regedit, that's how I found the settings I posted. But no idea what to put into that setting to change it to the settings posted in thsi thread. I will use the GB prog instead and see what it does.
Koksie I have the same problem with Resco explorer registry plug-in... :roll: Will try the regedit at home...
Regards,
Primoz
Koksie said:
On my MDA Compact, the Priority256 key has the DWord value 110 (0X00006E). So I have no idea how to change the setting to 0X80 (128). Anyone know how to do this? I am interested in testing the results.
Click to expand...
Click to collapse
Koksi, if that is your default, then you actually have an ever higher priority set by default then GB-SOFT Tweak sets.
Hmm, I'm wondering if some other software (Or GB-SOFT Tweak itself) else lowered my priority to 0x100 (256) causing my problems in the first place.
GB-SOFT Tweak definitely sets the value to 0x80 (128) when you turn the option on, and resets it back to 0x100 (256) when you turn it off.
Can anyone else quickly check the value of this registry setting without using GB-SOFT Tweak?
Same here. The default was 110....
my default was 256 and I know I've had terrible clicking sound when I tried to install a couple of games.
I have the same settings as Koskie. 0x6E (110) The sound from my rear speaker is ok so far no problems when playing mp3s and during alerts. So I guess I will not apply this tweak for the meantime.
my default was 100....i didnt notice any difference..(qtek s100)
My default value is 0x6E (110) - haven't tried the tweak yet.
andrewpmoore said:
my default was 256 and I know I've had terrible clicking sound when I tried to install a couple of games.
Click to expand...
Click to collapse
Andrew, if you set it to 110 you will have much better sound.
Everyone else, if you're already below 128, you're fine. Somehow a couple of devices (Andrrew, mine) got off the imate factory default (which seems to be 110) causing really bad sound.
Of course if you want some fun, you can manually set it to 256 and soft-reset to see how bad it is, then set it back ;-)
Hi everybody,
a lot of you on this thread seem to know quite a bit about registry settings and routine priorities. Could you please take a look at the problem in this one:
http://forum.xda-developers.com/viewtopic.php?p=99678#99678
Thanks!
My report:
Mine is 110 (factory default).
Set to 80, and found the sound is less clicking when hearing from the phone (talk like normal handphone, not from the speaker phone at bottom).
For sound like from Windows Media Player 10, or phone ringtones (midi), looks like the sound is a bit soft than before, but clearer.
I keep on 80.
Best regards,
Arto
hi have to report something weird! anyway a few posts up I said my default was 128... however I noticed that my mp3s seem to be playing out of sync or choppy and the quality was worse than before my ROM upgrade. when I checked the value it was set to 256. I'm not saying it is the ROM's fault as I have also installed/tried some other apps after the ROM upgrade and maybe these apps were responsible for lowering the audio quality for my JAM (maybe for performance purpose) anyway I've set it back to 128 and the sound is better. Maybe for people just about to do the ROM upgrade can check the before and after value so we know if it is the ROM doing the changing or just some apps.
THANKS SO MUCH FOR A GREAT THREAD!
After posting this same question here (BA Forum) and at howard forums I finally found this thread. I had the bad clicking/skipping during mp3 in WMP and during wav playback in the voice in GPS nav. My setting was 128 but I already installed the GB-Soft tweak. I still had the poor performance. I adjusted down to 110 and all problems seem to be gone. It definitely was some devious app that made a change because my device did not do this for a long time then it suddenly began. BTW, I have a pda2k not Jam. Anyway, thanks so much to all for a solution this was driving me nuts.
Thanks for the HACK !!
My device had the default value of 110, changed to 80. There's a definite improvement in the audio quality.
Thanks again.
hi all,
I'm struggling with a few things and can't seem to find a solution on the forum, mayb some of you know the answers?
1. Echo in Nokia Bluetooth Carkit (Ck-7w)... Thought bluetooth would be universal, so why does this carkit not work properly with Qtek... any known solutions?
2. Is there a way to set one of the hard button as the "Start-button"?
3. I've read a lot about registry hacks, can somebody tell me where to actually edit this registry.... I don't know where to find it, or edit it...
Many thanks to all...
Maarten
Is your microphone and speaker more than 1 meter seperated?
I use the CK1W and have no echo at all.
For the registry you can you Resco File Explorer 2005 it comes with a registry editor.
Good luck!
hi,
i just got myself a TyTN, before that i had qtek 9100 and i use to use this tweak:
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status,
WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM\Software\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
now i tried it on my TyTN and it doesnt work...each time after making the changes to the reg. when i softreset the .dll file gets missing in the reg. ? i dont understand why it shouldnt work as both the devices use wm5 ? could some please help me with this?
thanks,
i||uSi0n^
i||uSi0n^ said:
hi,
i just got myself a TyTN, before that i had qtek 9100 and i use to use this tweak:
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status,
WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM\Software\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
now i tried it on my TyTN and it doesnt work...each time after making the changes to the reg. when i softreset the .dll file gets missing in the reg. ? i dont understand why it shouldnt work as both the devices use wm5 ? could some please help me with this?
thanks,
i||uSi0n^
Click to expand...
Click to collapse
Try taking off the quotes on netui.dll and adding the windows directory in front \windows\netui.dll
String value Name=DLL
String Value Data=\windows\netui.dll
Seems to work for me
I also have dword key for FLags and OPtions, but they are set to 0
I've done this on my TyTN and it works fine. I think the key is to actually close the registry editor program (not just hit the X to minimize it) before the soft reset to ensure that all of the changes are saved to the registry.
hope this helps.
hi thnx for the prompt replies, but none of that helped...from the start i never used the quotes, im using PHM Registry Editor, and when i click on "ok" it asks me to save changes or not so im sure the changes are saved i have even verified it again by opening the prog. but when i softreset the dll key just disappears...i tried adding /window/ in front of netui.dll also...btw im using 1.18.255.3 english rom...
EDIT:
ok so after playing arround a little i have come to the conclusion that the reason why the dll key is not working is coz the .dll does not exist? i have looked a little into /windows/ folder and i see a file named "netmui.dll.0409.mui" but nothing like "netui.dll"...i even did a search nothing comes up...so someone could see and tell where must this dll file is located i could verify if it really there or not...
Thanks,
i||uSi0n^
Hello everyone,
I need help with a reg key that i am tring to do. I have checked but not found anything to do with the gps.
I am trying to see if i can make a reg key that can be done from the e_rom that will put in my gpd pair info, so i dont have to set it up everytime i do a hard reset!
I did try doing it by coping the reg key from when i have set it up the correct way but when i blank it out and enter the info again it does not do anything.
Reg key that i did was found in
Code:
[B][COLOR="Red"]DELETED[/COLOR][/B]
Update
Dang i think i just found my answer just looked at
HKLM\SOFTWARE\Microsoft\Bluetooth\Serial\
Well i will try this when i get home, but if anyone reads this can you confirm that this will work!!!
Man finding things out for your self is so much fun!!! Till I was writing this i did not know what i was doing wrong!!! (That is if I was doing it wrong!!!)
Merci
Does anyone know if this would work
Well i got it to work, so now I have a cab file that sets up my BT GPS unit without me doing anything!!!
Maybe not a big thing but its a start, does anyone have any other small things like this, cus I am learning and would like to try something different!!!
This is what i used to make the reg
DELETED
Click to expand...
Click to collapse
DELETED
Click to expand...
Click to collapse
Here is your best bet on what to do.. start with a fresh install where you have paired nothing.. then use an app such as TRE and export the registry. Then pair your device, after pairing turn your BT off and soft reset. After the phone comes back up do another reg export with TRE. Then go download a trial version of Registry Workshop and this app will let you put your 2 exports in there and it will do a comparison and tell you what keys changed. Then you can take these changed keys and make yourself a cab
CLOSED, DUE TO IT NOT WORKING
When I try to use the sound equalizer it just says I have to connect a headset - but I have a BT headset connected!!!
Is there any registry hack to make it work with BT Headsets and not just usb ones?
Does anyone else have this problem?
We talk about HTC Audiobooster?
It only works with the HTC Kabel Headset! It doesnt work with Blue Tooth devices :->
NetrunnerAT said:
We talk about HTC Audiobooster?
It only works with the HTC Kabel Headset! It doesnt work with Blue Tooth devices :->
Click to expand...
Click to collapse
Well that sucks!
I've had the same problem - very irritating.
however, look up and download SRS WOW HD - install, reboot the phone.
The Audio Booster disappears from the HTC Music Player, and you have a settings option for the SRS WOW HD. It does take a bit of processor time, and a fair bit of tweaking of its options, but it does make the Dual sound quite nice.
Shame about the occasional "break" in the music though.
THis Programm work ONLY with the Kabel Headset!!!
clonmult said:
I've had the same problem - very irritating.
however, look up and download SRS WOW HD - install, reboot the phone.
The Audio Booster disappears from the HTC Music Player, and you have a settings option for the SRS WOW HD. It does take a bit of processor time, and a fair bit of tweaking of its options, but it does make the Dual sound quite nice.
Shame about the occasional "break" in the music though.
Click to expand...
Click to collapse
Does SRS WOW HD work with bluetooth headsets?
Yes it does, but you need Edit your Registry, too support your Blue Tooth driver.
Here a Copy from a Thread about this task:
That worked through BT headset it is necessary to copy all parameters from [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Wave Dev] in HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
Except for value of parameter "OldDriver", he should be such, as was "DLL"
For example:
Before
"DLL" = "bta2dp.dll"
After
"DLL" = "WOWHD_ARM_WCE_PPC2005_Driver.dll"
"OldDriver" = "bta2dp.dll"
http://forum.xda-developers.com/showthread.php?t=355913&page=3
http://forum.xda-developers.com/showthread.php?t=357071
To have real stereo with your bluetooth stereo headphone you have to change the following registry key:
HKLM\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings
Change the UseJointStereo value 1 to 0.
The value 1 means dual mono, value 0 means stereo
Importent ... befor you edit ... you must 100% know what is your device blue tooth driver!!! different HTC Device ... different Drivers!
Thanks alot that worked great!
/Hass
hass said:
Thanks alot that worked great!
/Hass
Click to expand...
Click to collapse
I spoke too soon - I now have no sound during phone calls! I am right now removing the changes I made...
what stand in your registry??? what have you change???
NetrunnerAT said:
what stand in your registry??? what have you change???
Click to expand...
Click to collapse
That worked through BT headset it is necessary to copy all parameters from [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Wave Dev] in HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
Except for value of parameter "OldDriver", he should be such, as was "DLL"
For example:
Before
"DLL" = "bta2dp.dll"
After
"DLL" = "WOWHD_ARM_WCE_PPC2005_Driver.dll"
"OldDriver" = "bta2dp.dll"
http://forum.xda-developers.com/show...=355913&page=3
http://forum.xda-developers.com/showthread.php?t=357071
To have real stereo with your bluetooth stereo headphone you have to change the following registry key:
HKLM\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings
Change the UseJointStereo value 1 to 0.
The value 1 means dual mono, value 0 means stereo
I added the information above and installed the driver. I am now restarting to see if that fixes otherwise I uninstall the drive and go back to the old one.
grrrr
you doesnt understand me ... what stand in the regkeys befor you edit the settings? have you restart your device after change?
Yes I have restarted and in the registry it said:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd]
"Sysintr"=dword:00000019
"SPKVol_PhoneCall_02h_06h"=dword:00000003
"SPKVol_NotPhoneCall_02h_06h"=dword:00000000
"Priority256"=dword:00000095
"Order"=dword:0000000b
"MicGain"=dword:00000027
"Index"=dword:00000001
"HPVol_PhoneCall_04h"=dword:00000004
"GainADC_LoudSpkMIC_12h"=dword:00000037
"GainADC_HeadsetMIC_12h"=dword:0000002a
"GainADC_BluetoothMIC_12h"=dword:00000021
"GainADC_ReceiverMIC_12h"=dword:00000037
"Flags"=dword:00000000
"DACVol_0Ch"=dword:00000007
"3DEff"=dword:00000000
"AGC"=dword:00000000
"Treble"=dword:00000000
"Bass"=dword:00000000
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
"OldDriver"="bta2dp.dll"
"Dll"="WOWHD_ARM_WCE_PPC2005_Driver.dll"
"Prefix"="WAV"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"Dll"="WOWHD_ARM_WCE_PPC2005_Driver.dll"
"OldDriver"="Wavedev.dll"
"Sysintr"=dword:00000019
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
"Bass"=dword:00000000
"Treble"=dword:00000000
"AGC"=dword:00000000
"MicGain"=dword:00000027
"3DEff"=dword:00000000
"GainADC_ReceiverMIC_12h"=dword:00000037
"GainADC_HeadsetMIC_12h"=dword:0000002a
"GainADC_LoudSpkMIC_12h"=dword:00000037
"GainADC_BluetoothMIC_12h"=dword:00000021
"HPVol_PhoneCall_04h"=dword:00000004
"SPKVol_PhoneCall_02h_06h"=dword:00000003
"SPKVol_NotPhoneCall_02h_06h"=dword:00000000
"DACVol_0Ch"=dword:00000007
"Flags"=dword:00000000
"Priority256"=dword:00000095
"Order"=dword:0000000b
"Index"=dword:00000001
"Prefix"="WAV"
I now did a hard resert but thanks!
/H
hass said:
I spoke too soon - I now have no sound during phone calls! I am right now removing the changes I made...
Click to expand...
Click to collapse
That happened to me too, needed a pesky hard reset. Can anyone explain the reg changes again?
this are the reg changes and it works! if its a big problem for the most guys, i can provide a modded version for Qualcomm Devices. i need only few min. to edit.
I did a hard reset to get my phone working again. I don't know what it was that stopped the sound on my phone but I just have to make do with standard instead
Stopped? You mean the little breaks?
Oh ... this isnt a SRS WOW problem! it is possible you tweak your device with some registry settings? Breaks in the Audiostream have many reasons. the most are ...
Buffer in the Blue Tooth Stack are to high
Buffer in the File System are to high and the MicroSD Card go in the deep power down mode (this problem can you have, if you here a very large file and a big part can stay in your ram!)
you switch to the next track (this is the most reason)
process task doesnt become enough resources (possible ... )
generel powermanagment problems
all this bracks are only timing problems of many parts in your device!!!
No, not the pauses issue that others have referred to - after installing SRS WOW and making the registry changes I had no sound at all during phone calls. Music worked fine but when I called someone or when they called me then I couldn't hear them and they couldn't hear me.
I had to hard reset to fix the problem.
/Hass
Did anybody succeeded with xt7500 + srs wow over bluetooth ?
at least tried myself and at the moment no progress.
Before reg keys copy BT worked well and connected with
headset. After keys copy ppc BT menu indicted that wireless stereo are'nt
avaliable.
Is it nescessary copy over also same named settings ? example
both folders have before copy same named settings, like index, etc.
Good comments appreciated.
Originally Posted by hass
I spoke too soon - I now have no sound during phone calls! I am right now removing the changes I made...
Click to expand...
Click to collapse
cojones said:
That happened to me too, needed a pesky hard reset. Can anyone explain the reg changes again?
Click to expand...
Click to collapse
If you added bluetooth support to SRS and lost sound (or downloaded a cab with bluetooth support builtin) you need to follow the earlier instruction warnings, namely:
Preserve your Index, Prefix, and OldDriver settings so that they match what was previously specified in your BTA2DPSND registry folder (with the contents of olddriver matching whatever was in driver).