Help me pls... Nokia Carkit, Hard Button and Registry Hacks - 8125, K-JAM, P4300, MDA Vario General

hi all,
I'm struggling with a few things and can't seem to find a solution on the forum, mayb some of you know the answers?
1. Echo in Nokia Bluetooth Carkit (Ck-7w)... Thought bluetooth would be universal, so why does this carkit not work properly with Qtek... any known solutions?
2. Is there a way to set one of the hard button as the "Start-button"?
3. I've read a lot about registry hacks, can somebody tell me where to actually edit this registry.... I don't know where to find it, or edit it...
Many thanks to all...
Maarten

Is your microphone and speaker more than 1 meter seperated?
I use the CK1W and have no echo at all.
For the registry you can you Resco File Explorer 2005 it comes with a registry editor.
Good luck!

Related

NOT WORKING SOUND?? DON'T HARD RESET ; FIX HERE!!!!

make sure your registry looks like this:
[HKEY_LOCAL_MACHINE/Drivers/BuiltIn/WaveDev]
"Prefix"="WAV"
"Dll"="wavedev.dll"
"Index"=dword:00000001
"Order"=dword:00000000
"IClass"="{A32942B7-920C-486b-B0E6-
92A702A99B35}"
good luck :lol:
here is a registry fix too( automatic ), just import and your sound works :wink:
Any idea what these settings actually do?
The only one that is different from my device is "Order", which is 2, not 0.
FYI, as was referenced in another post, connecting and disconnecting the headset does seem to reset sound speed problems.
- Justin
the file is NOT for sound speed or any adjustments. it is a backup of the wave registry settings. if audio is not working at all, this will fix it.

Change directory to save incoming bluetooth files

Can anybody help me to change the location where the mda vario nl (htc wizard) locates the incoming bluetooth files.
they now go to my docs... I want them to go to my storage card. where can I change this?
I have found no answers in this forum and the normal bluetooth settings seem to override drYar (which i have tried)
thank you
I know it's difficult otherwise I wouldn't ask...
Does anyone know this?
vjvobulis doesn't do this either. Does anyone have an idea???
or is it just not possible. can anyone reply?
check out BT Sniper or project Wolf. These BT managers were posted recently on this forum and they both claim to be able to do it, if I rememer correctly. The are not freeware and I don't know if they are any good, but you can always try to see if they fit your needs. through a reg hack it has so far not been possible.
thanx I tried to install te wolf project but i need to update the rom first. i will try bt sniper
thanx again i will let you know how it worked.
tijmensmit said:
Can anybody help me to change the location where the mda vario nl (htc wizard) locates the incoming bluetooth files.
they now go to my docs... I want them to go to my storage card. where can I change this?
I have found no answers in this forum and the normal bluetooth settings seem to override drYar (which i have tried)
thank you
Click to expand...
Click to collapse
I tried various registry tweaks but could not change it to storage card. I deduced it was hard written into the software, so only way to change it is with new software - as detailed above.
thanx for the posts... however i can't really find bt sniper. maybe i'll have to update my rom en install the wolf project. it sounds good.
if anyone has another idea please let me know
Sniper! BT manager can be found using the search on this forum, there is a thread on it that was recently ( last week) started. link to the thread: http://forum.xda-developers.com/viewtopic.php?t=53778&highlight=sniper
PS: please try the search first before you ask for help
Sniper
Sniper can be found at the following location:
http://www.smartphone.si/sniper/
I use a Wizard (Cing 8125) and it works great.

Bluetooth Mono Headset + Redirect sound to it (cab)

Hi!
I've been reading a lot of these forums about activating A2DP with a mono-bluetooth headsets, and found (in different places) some different ways, (change a couple of registry settings and with some pocket pc/headset one had to change a file called BTAGExt.dll)
I have made a CAB file for these hacks and also included the file "BTAGExt_new.dll" I call it _new because I change the registry to locate this new file instead of the old, that way one doesn't have to overwrite the dll file and can, if problems occur, change in the registry instead. The file is needed for some (me included) that are having trouble with music playing in the headset for about 10seconds.
Anyway, i have made a self-installing cab file for this, so that other people may use it easily, without need of hacking the registry, one does not need to use btaudioon and similar program to make this work,
EDIT: AS many people pointed out, here are the instructions to USE this , sorry for that:
Originally Posted by GarrisRP
3.- This was never completely spelled out either; How to activate it:a.Push your headset Voice Activated Dialing Buttonb.Now all sounds should play through your headset.c.To deactivate, push the headset dialing button.
It is nice to see my little hack being used
BE AWARE:
*VoiceCommand DOESN'T WORK!! (since my cab disables it in favour of all-sound in headset)
*I take NO RESPONSIBILITY if this crashes your phone or anything else, USE IT AT OWN RISK!
* It only changes this things:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"UseJointStereo"=dword:00000000
"BitPool"=dword:0000003a
"MaxSupportedBitPool"=dword:00000050
"MinSupportedBitPool"=dword:0000000e
[HKEY_LOCAL_MACHINE\Drivers\Builtin\BtA2dpSnd]
"Priority256"=dword:0000003c
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"LaunchApEnable"=dWord:1
"VoiceCmdDuration"=dWord:15180
And copies this file: BTAGExt_new.dll to \Windows (or whatever windows dir you have)
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway]
"BTAGExtModule"=string:"BTAGExt_new.dll"
Then do a soft-reset and voila, the sound should work.!
This worked great with my X01HT and Motorola HS850.
I used this too with my Sony HBH-60 bluetooth mono headset and it worked perfectly for me too .
Much better for listening to podcasts while in bed!
(no more strangling myself with earphone wires! )
.
I Have an I-Mate JASJAR
and it didnt work with me
green_boss said:
I Have an I-Mate JASJAR
and it didnt work with me
Click to expand...
Click to collapse
Did you try the other alternatives? (I've linked them in some other threads; use the forum search engine.)
Hi,
How do you revert to the initial situation (what are the original registry settings ?)
Thanks
papex
This doesn't work for me with T-Mobile Vario 2 (Ger) and logitech traveller headset
papex said:
Hi,
How do you revert to the initial situation (what are the original registry settings ?)
Thanks
papex
Click to expand...
Click to collapse
I am not sure, but I belive that if you uninstall it it should go "back" to normal.
otherwise, the "normal" would be
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"UseJointStereo"=dword:00000001
"BitPool"=dword:0000003a (this setting just changes the soundquality)
"MaxSupportedBitPool"=dword:00000050 (this too delete if not wanted)
"MinSupportedBitPool"=dword:0000000e (and this, delete if not wanted)
[HKEY_LOCAL_MACHINE\Drivers\Builtin\BtA2dpSnd]
"Priority256"=dword:0000003c (delete if not wanted, better quality)
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"LaunchApEnable"=dWord:1 (KEEP!)
"VoiceCmdDuration"=dWord:15180 (change to 30seconds or whatever, dword:30)
And copies this file: BTAGExt_new.dll to \Windows (or whatever windows dir you have) (delete this file!)
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway]
"BTAGExtModule"=string:"BTAGExt_new.dll" (change to BTAGExt.dll)
cybertron said:
I am not sure, but I belive that if you uninstall it it should go "back" to normal.
otherwise, the "normal" would be
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"UseJointStereo"=dword:00000001
...
"BTAGExtModule"=string:"BTAGExt_new.dll" (change to BTAGExt.dll)
Click to expand...
Click to collapse
Thank you very much.
I use the audio to bluetooth feature with skype as it would otherwise send the sound to the loudspeaker, which, in a public place is not really convenient.
Now, with the code to "on" the sound and the code to"off" it, maybe there would be a simple way to create an app which would toggle from one state to the other? would you know how to do that ? alternatively, is there some kind of scripting tool for the ppc that I could use ?
thanks in advance,
papex
perfect it s work good for me with tytn and HS850
thank you
cybertron said:
"UseJointStereo"=dword:00000001
Click to expand...
Click to collapse
Interestingly, this makes A2DP to transfer everytig in mono on my other MS BT stack-based devices, as has also been pointed out in my related article - are you sure this is the original value?
Menneisyys said:
Interestingly, this makes A2DP to transfer everytig in mono on my other MS BT stack-based devices, as has also been pointed out in my related article - are you sure this is the original value?
Click to expand...
Click to collapse
I believe that it is, at least on my device, but I may be wrong, it was long since I did my cab file. so not 100% sure no,
I was as curios as you, could it be that it uses mono to save bandwith? and thereby increase the range of the bluetooth?
but hey, I am no expert, I roughly took reghacks from around this forum and put together a cab file, I tried to make the cab to produce the best sound availible to a monoheadset, and nothing more, nothing less.
as it were a couple of weeks ago I since I did this i don't really remember every detail of it, but I believe most of this is stated in the hermes_wiki
I have not installed this yet and have a question. If I'm listening to my Slingbox through my Nokia 900 headset and get a phonecall, will it automatically switch to the phone call or do I have to stop Slingbox? Thanks
CJNYC said:
I have not installed this yet and have a question. If I'm listening to my Slingbox through my Nokia 900 headset and get a phonecall, will it automatically switch to the phone call or do I have to stop Slingbox? Thanks
Click to expand...
Click to collapse
it should switch to the phonecall (mine does anyway) however!! Be aware that the sound will be outputted to speaker when the call ends!
Mic on bluetooth headset
I wanna know if I installed this file to use something like Skype, can I not only hear the sound from my Bluetooth headset but also speak through the headset too?
How do I get back to normal?
Hoping someone could help me out. I tried installing the file above. The installation process went well, but immediately following the soft reset, I noticed that my phone screens and response to menu picks was considerably slower. My phone locks up all of the time, and I am unable to toggle the bluetooth on and off. I tried to uninstall the application, but I get a message at the end saying that it was unable to completely remove the program. Wondering if anyone could help me to get to the registry and change the settings back to normal. HELP!!!!
Works for Vodafone 1605 with factory rom
thanks
Thank you for the cab/hacks. None of the other alternatives worked on my 8525. Now if someone could incorporate this into someway to switch between modes, that would be great. Right now, I install and uninstall the cab several times a day! I get nervous that the registry will get corrupt from all of the install/uninstalls.
Thank you very much!
Hi!
thanks for all the appreciation about my cab! I am happy to see that others are using it and are happy about it
I also noticed that some people has problems with it,
dhenry88: Try and install it again, otherwise, try and revert the setting yourself, I posted the "original" settings a some time ago in this thread, so go get a reg-editor and hack it
because that is all the cab-file does, changes registry (and copies a file to /windows/system32
however, this file is not important for the os itself (because I change the registry to find the changed file, not changing the file and overwriting the original.
but sorry to hear that it had such bad performance on your phone, it shouldn't do anything like that, but hey, every phone is different.
lantern20 said:
Thank you for the cab/hacks. None of the other alternatives worked on my 8525. Now if someone could incorporate this into someway to switch between modes, that would be great. Right now, I install and uninstall the cab several times a day! I get nervous that the registry will get corrupt from all of the install/uninstalls.
Thank you very much!
Click to expand...
Click to collapse
Indeed this is a great little program and I'm very thankful for it. Like lantern, I think it would be great if someone could figure out a way to switch modes easily as I'm unable to initiate a voice call through my Bluetooth headset with this program installed. I too have to install/uninstall the cab many times each day. I’m certainly not complaining, just expressing a wish.

Voice Tags not working on WM6 Typhoon

I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Same problem here
I have the same phone & problem.
And I can't charge through USB.
Anyhow, this version improves the typhoon far beyond previous versions. It's faster than wm5, wm5torage is incredible, there are no memory leaks (with wm5 I ended up with 2mb free and had to reboot frequently)
Cheers.
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
karhoe said:
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
Click to expand...
Click to collapse
Thanks for your help karhoe
I tried to do what you mention, but when I disable USB charging, there is no sign of charging (expected behaviour) and when I turn it back on, the problem continues.
Last night I reflashed to wm5 so I can:
- Check that the phone still can charge through USB (it charges ok)
- Get the font configuration in the registry so fonts look the same in wm6.
- Try to identify how voice tags work and see if I can take some dll/key association back to wm6.
I'll post results!
Mariano
Ok, I'm back to wm6 and I've found the following:
* USB charging works OK... I don't know what caused it. I'm reticent to install wm5storage, maybe it has something to do with it.
* I made the fonts look exactly the same as wm5. This is how:
In the registry, set the following:
\HKEY_LOCAL_MACHINE\GDI\SYSFNT\
CS=0
Ht=4294967281
It=0
Nm=Segoe Condensed
Qt=5
Wt=400​
\HKEY_LOCAL_MACHINE\GWE\Button\StFontWeight\Wt=700
\HKEY_LOCAL_MACHINE\GWE\Menu\BarFnt\
WtMUI=700
Wt=700​
\HKEY_LOCAL_MACHINE\GWE\OOMFnt\
Ht=4294967284
Nm=Tahoma
Wt=400​
Anyway If you have Tahoma in your device's Windows directory some programs will look different.
Finally, regarding voice tags, I could only discover that there are no links like HomeLP.lnk or things like that to call an executable. It must be done some other way. :S
Mariano
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
WildDogRob said:
I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Click to expand...
Click to collapse
is this what you wre looking for?
802 said:
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
Click to expand...
Click to collapse
Just to note this works now. just delete pairing after cab install, pair again, set as handsfree, itworks over bluetooth.
Thanks!
rickwyatt said:
is this what you wre looking for?
Click to expand...
Click to collapse
Now voiceTag is working fine. Great!
Found a way to enable built in voice tags over Bluetooth.
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
WildDogRob said:
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
Click to expand...
Click to collapse
Thank you SO much!!!
It works like a charm in my UK SPV C500!
You' re great!!!
Help with what file WM6 uses for voice tags
Can someone please tell me what .dll or file is used when you record a voice tag. I am using Andots WM6 ROM on my SMT5600 and voice tags do not work. I want to try to replace the non-working file with a WM5 file.
Or, maybe someone could tell me how to figure out what file/.dll is used. I’ve searched the registry for anything referring to voice tags but I found nothing.
Thanks

Need some help..

I recently discovered this site and decided to upgrade my t-mobile wing... I chose the touch-it 2.3 rom that TylerC put in his upgrading kit... The phone seems to operate fine with the exception of when I'm using my bluetooth headset. The headset works however I'm no longer able to simply press the button and say who i wanna call, like the voice dial is messed up. Now before I posted this I searched the forums high and low for a solution and the only thing i could find I thought would save me but it didn't...
Here's what I found...
mrmikemcguire said:
Ok so I was having the same issues. My bluethooth was not being initiated by the button on the earbud. This was from another thread, I did it and it works fine now. Hope it helps........
Originally Posted by nextpimp
My Contribution....Since people dont want to find it out their own.... Voice Speed dial Over Bluetooth ...
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
Itje ... Awesome Rom... All I gotta do now is unmap Voice Command from the hold funtion on button five.... Its not listening to me in the settings so gotta go to the reg... Help would be appreciated as the registry really isnt my strong point.
Click to expand...
Click to collapse
I tried that and nothing happened so if anyone knows how to solve this issue I would greatly appreciate the help..
Thanks,
Greg
try to "power cicle" -- hold power button for 3sec and select "yes"
of course after you made the changings....
use totalcommander or else to edit
tried that and still no success... anyone else??

Categories

Resources