Database Users

New A2DP Discovery

Hi Guys,
I wanna share something i found out a while ago.
I am currently holding on to a Motorola HT820 and a BlueAngel and i was kinda playing around with it wondering why i cannot answer phone calls and only can play my MP3's. Here is the solution.
Install the A2DP Profile
Soft Reset
Pair it up to your BT Stereo headset using high quality audio
now, upgrade to build 3900.
Run the restartradio.exe
run the bt upgrade cab file
run the restartradio.exe
Now, pair it up to bluetooth handsfree headset.
This works wonders. It seems to work best on WMP10. I have tried
Mortplayer but, after i answer calls, it stops playing and does not resume.
For WMP10, it resumes fine. I have only tested on BlueAngel and HT820.
I dont have the luxury to get my hands on other devices as yet.
BT upgrade files found here
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
A2DP details found
http://forum.xda-developers.com/viewtopic.php?t=25443
ENJOY !!!!

this currently works best on WMP 10
You can continue listening to music after your call ends with mortplayer,
you have to disconnect the pairing and re-pair again..

XDAII and Motorola HT820
Hey guys,
I'm contemplating buying a Motorola HT820 but I'm concerned that it might not work with my phone - I have an XDAII with WM2005 1.60A installed. anyone know anything?
Thanks and best regards...

Hi
This sounds like what I've been waiting for too.....
I have an XDA II running 2003SE will this work with this combo any ideas?

Good one... will try it later

Has anyone tried with Motorola HS 850???

Has anyone tried with Motorola HS 850???

So far, i have not tried it on XDAII... but i think it should work..

Can anyone confirm if this is possiable with an XDA II as having read through numerious threads on the subject of Bluetooth implementation with various Wicomm configurations, but cannot clearly identify that the A2DP Protocol can be successfully made to work on an XDA II.
I suspect that this can only operate on an XDA IIi or XDA IIs. My requirement is to get a set of Motorola HT820 Bluetooth Stereo Headphones to function with my XDA II via Bluetooth, I am not really worried about the Phone Headset function I would just like to hear Audio via Media Player 10.
Thanks

I have just upgraded to 1.40 ROM (iMate) with Orange EXT ROM on M2000. I have radio 1.13 and the A2DP profile loaded.
Everything was working fine with the old ROM and wmp9, but wmp10 does not respond to the pause, back and forward buttons on the ht820.
Does anyone have this working on ht820? Is there a known work around?

Motorola BT820 Audio Gateway and a player
I've followed the steps above and now have the two new profiles and have managed to pair my Motorola BT820's without any problems.
I've read that this works best with WMP10 but since I don't have this I decided to try Mortplayer.
Silly question : How do I get my XDAIIs to send the audio to the headphones ? Their is an outgoing connection between the two but the sound still comes out of the speaker on the XDAIIs.
If a phone call comes in then this is directed up to the BT820's
Help
Jason

i have done over 50 hard resets.. many tries and it seems to be an intermittend prob.

@woodrjh
In this way a HP Bluetooth Headphones and a Motorola HT820 works with my xda IIi in a2dp mode incl. the Buttons in WMP10.
1. remove the RunBT file from the Autostart dir -> softreset
2. Install the PDA2K_BroadcomCorp_BTUpdate.cab -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
3. Install the HP iPAQ Bluetooth Stereo Headphones Driver Update -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
If the error \windows\btceavif.dll in use come, rename it with Resco File Editor and try again the driver update.
4. Put the the RunBT file back to the Autostart.
cu bülo

does this method enable your bluetooth headset to receive calls?

o2 mini new bluetooth stack (AKA bluetooth stock).

hi guys, i know all of you want more bt stack rather than ms bt stack. now i found new bluetooth stock for dopod 818(o2 mini).
this is support your o2 mini support stereo bluetooth headset, but make should your bt headset supports. and there is also file transfer stock......and other thing, but stereo bluetooth function need to be improving.
attention: backup you system first.
i learn a lot in this forum, so i want to share this stock for all of you. this stock is i find from somewhere, so i can not fix any bug. anyway just enjoy....

First post and delivering such a revolution? Makes me nervous...

Chatty said:
First post and delivering such a revolution? Makes me nervous...
Click to expand...
Click to collapse
HAHA, I KNOW. BUT YOU CAN TRY, PLEASE FIND ATTACHED PHOTO. THIS DRIVER COME FROM ONE BLUETOOTH HANDSET.

Could this be? Can anyone verify?

Handsfree versus headset
Hi,
I tried and first thing, everything work now as fine as before so a first good point.
Second one problem : my Bluespoon AX is only recognize as a Hands-free and you can only set "Audio redirection" for Headset.
Perhaps some registry work ?
I will continue to investigate

very nice patch indeed..
installed it on my JAM... an it runs OK...
some extinsive testing is required however... I'll let you know later
Thank you kevinyang6688
If this works, you'll be the best

Works here aswell!
it even seems to support bluetooth printing???

---

just downloaded.. will give it a try.
thanks.

Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse

Re: O2 MINI NEW BLUETOOTH STOCK.
vicqoo said:
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
When you're logged on, you can download the file in the first post.

INstalled it but I have no clue how to make it work. Been to the BT settings and everything is there but I have no clue to as it does not detect my my Jabra BT250V.
Will this work in actually turning my Jabra into an audio headset or is it only as phone headset?

Does this help at all with the Nokia car kit echo issue?
Cheers

i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?

To Leewenam
Same thing for me but my Bluespon ax is only detected as a handsfree

Re: To Leewenam
eurorpeen said:
Same thing for me but my Bluespon ax is only detected as a handsfree
Click to expand...
Click to collapse
I guess this audio streaming thing only work for stereo BT? can anyone confirm this?

leeweenam said:
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
Click to expand...
Click to collapse
maybe delete the device and bond it again???

Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Man, you seriously kick a$$! This cab adds A2DP, FTP (successfully sent a series of 3 files to my Magician :shock: :wink: ), Audio Gateway (was able to use my laptop as a BT handsfree ), BT Printing Profile... AWESOME!!! Takes MS BT stack to a whole new level :shock:

But you could already send files with activesync over bluetooth without this stack (do i suppose ftp service is the same thing). Btw can you acces the files located on your computer from your mini now??? (if yes plz tell me how)
As far as I am concerned, it works but doesn t change anything with my bluetooth headset and voice command, i always don t hear any voice command sound in my bt headset, but then I hear the phone conversation directly in the headset...so nothing has changed.
Would have loved so much to hear and launch voice commands directly from the headset's mic.
But thx anyway! that s a really good thing for us anyway =)

It does work with I-tech S35 Stereo BT Headset
As per subject really...
Just tested this on my 1.12.00 T-Mobile Rom and indeed all audio is indeed being re-directed to my headset. Only 'drawback' is that I can't get it to work with PocketMind Pocket Music- the sound it just muted.
But it works perfectly well with Windows Media Player. Slight hitch with WMP is that I am unable to change the volume on the software or indeed the JAM system volume directly- a minor fault for me since I have a volume control my headset Also the music seems to cut out for a second or so every 7-8 seconds.
Music pauses and restarts when an incoming phone call is received.
A massive thanks goes out kevinyang6688. Cheers mate, I have been wanting this for ages! Thanks again!

A2DP (stereo bluetooth) on Qtek 2020

I installed A2DP bluetooth update for Magician ('BCHS_FOR_POCKET_PC_OZONE.ARMV4.CAB' found on 'O2 MINI NEW BLUETOOTH STOCK' thread) on Qtek 2020 and it works well with my Motorola HT820 stereo headset.

A2DP on Qtek 2020
Well Pooh,
You seem to be lucky, I'm trying with a WCS1 Headset in a motorcycle helmet (from BMW) , I tried to change the CPU speedsettings with PocketMaster but to no avail. Some speeds work defenitely better than others but it is still skipping on some songs. Some songs do play well other are skipping all the time. Would you mind to provide the specifics of the played music ? mp3 ? 320 Kb ..
Many thanks
André

pooh said:
I installed A2DP bluetooth update for Magician ('BCHS_FOR_POCKET_PC_OZONE.ARMV4.CAB' found on 'O2 MINI NEW BLUETOOTH STOCK' thread) on Qtek 2020 and it works well with my Motorola HT820 stereo headset.
Click to expand...
Click to collapse
What rom do you have.

I have also had success with this CAB on my XDA II with a ITech Clip S. It works for both voice calls and stereo music. I'm running the UK rom with blackberry support (1.72.00WWE).
Stereo music worked straight away, but I had to play around a bit to get the voice headset profile to work, and in the end, installed Pocket Bluetooth Tools, reset the Itech and rebonded with the new headset profile and it worked like a charm.
ps, first post for me, so I thought I'd make it a useful one

andrecollin: I tried a couple of mp3s and all of them are played fine. There is an information about transmission speed displayed in a tooltip after clicking the bluetooth streaming icon: 195 KB/s (Kbytes/s).
imablackhat: The system information is: ROM 1.66.00WWE, ROM date 02/20/04, ExtROM 1.66.140, WM Version 4.20.0 (Build 13252), CPU Intel PXA263. The ROM has never been changed. It is original WM2003 (not SE). The device comes from Danish Sonofon GSM operator.
A2DP works perfectly. However, there is probably no support for AVRCP (I cannot switch to next/prev mp3 by pressing buttons in my HT820). In addition, bluetooth streaming works with Windows Media Player. I did not succeed with TCPMP (silence in the headset).

A2DP for Alpine

Is there a download for A2DP for the Imate PDA 2 that is available and reliable ?
I see some of the other devices are getting this to work, but I haven't seen for the Alpine ? I'm trying to get this to work with a Bluesonic Blue ant bluetooth speaker. It works with the speaker in phone mode but the audio qulity is poor (phone quality).

A2DP is perfectly work on Alpine. Even with keys support!!!

Hmmm- I've had a reasonable go at trying. Anywhere i can get some information on how I should be doing this ? Maybe I am missing something ?

my xdaIIi run A2DP perfectly.
After you install the patch, setup an extra partnership with your BT earpiece or speaker whatever with the high quality audio mode under the BT manager.
After the setup, connect the device and press the talk button in your earpiece, play the music and the sould is perfect (almost)

A2DP for Alpine... where is this patch?
Hello,
So... it works perfectly... but with a patch. Good news.
What patch is that?
Where can we find it?
How do we install it?
Thanks in advance!
-Lostgweilo-

Re: A2DP for Alpine... where is this patch?
lostgweilo said:
Hello,
So... it works perfectly... but with a patch. Good news.
What patch is that?
Where can we find it?
How do we install it?
Thanks in advance!
-Lostgweilo-
Click to expand...
Click to collapse
here is it. After installation, you can find the high quality audio and keyboard setup in the bluetooth manager

My I-Tech R35 works nearly perfectly with the alpine. Every now and then the sounds cuts out for a second or two and then comes back. As if there is not enough 'bandwidth'
Any ideas? Any reg tweaks?
Thanks

Sounds like a CPU priority issue...

I found out what the problem was....
Wifi interferes with the bluetooth
Doh! Can't stream BBC Radio 1 anymore lol
Thanks

moghisi101 said:
My I-Tech R35 works nearly perfectly with the alpine. Every now and then the sounds cuts out for a second or two and then comes back. As if there is not enough 'bandwidth'
Click to expand...
Click to collapse
Hi, could you use the forward and backward keys on your i-Tech R35?

I use r35 also, but can not use >&< or pause keys

frankrick said:
moghisi101 said:
My I-Tech R35 works nearly perfectly with the alpine. Every now and then the sounds cuts out for a second or two and then comes back. As if there is not enough 'bandwidth'
Click to expand...
Click to collapse
Hi, could you use the forward and backward keys on your i-Tech R35?
Click to expand...
Click to collapse
No, I could not. The play/pause also did not work. However, I believe that they do work with TCMP (I use PocketMusic). Volume buttons work regardless. Also, the A2DP profile does not pair automatically with the R35 even if I press the Multi-Function Button!! But damn, the audio quality is amazing now.
All the media buttons work when used with my A2DP hacked Wizard (o2 XDA Mini S)
cya

moghisi101 said:
No, I could not. The play/pause also did not work. However, I believe that they do work with TCMP (I use PocketMusic). Volume buttons work regardless. Also, the A2DP profile does not pair automatically with the R35 even if I press the Multi-Function Button!! But damn, the audio quality is amazing now.
All the media buttons work when used with my A2DP hacked Wizard (o2 XDA Mini S)
cya
Click to expand...
Click to collapse
Thx, I got it! I might have a try with TCPMP player on my XDA IIi. I just wonder why they don't provide the AVRCP patch at the same time.
Anyway, I checkd the picture of XDA IIi's PCB board and found that the bluetooth module of XDA IIi is UGXZ5 which manufactured by ALPS, a japanese company. This UGXZ5 supports the Ver1.2 of bluetooth spec. However, HTC utilizes the bluetooth driver software that coming from Broadcom.

This may be an obvious question, but how do you install the BT patch mentioned above?
Cheers;
pc

Download the CAB file to your PC, then transfer it with Windows Explorer or ActiveSync to your PPC (Go to My Computer and then Mobile Device or click Explore in the ActiveSync window) and then on your PPC use a file manager program (File Explorer) to browse to the directory you saved the CAB file to, and then click it. It should automatically install and then delete the original CAB afterwards.

Flawless; Thanks a lot.
Cheers;
pc

Hi,
Is there a patch that will allow the BT to work without the phone being on, as currently need the phone on to use BT.
Thanks
Gordon

has anyone got A2DP to work with the htc820 + windows media player? I have had it working with tcmp but after taking a call the audio isn't rerouted via the headset?

Just pause TCPMP before answering phone. And then music will resume ok.

MP3 with bluetooth headset - Vario II

Hi
just bought one of these, and was wondering whether it's easy to listen to a mp3 podcast using a bluetooth stereo headset.
What package can I use (windows media, mortplayer ?), and do I need to install any updates or hacks to get it working.
thanks
Mat