Hi all
I have a MDA compact which I wish to connect to my car stereo as a handsfree unit. I have an auxiliary input for my stereo.
Is it possible just to purchase a 2.5 to 3.5mm lead for this? I have a gut feeling the mic won't work - please help? Is it possible to buy such a lead with a built in mic?
Thanks
Carl
Hi, I used to have a XDAII which I connected to the auxillary port on my car stereo, just like you suggest. It worked perfectly. When using the phone, the caller's voice woudl come out of the car speakers and the mic was powerful enough to pick up my voice even though the unit was mounted on my windscreen.
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact. Sorry couldn't offer more advice on your particular device, but I hope my experiences help.
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
carlreader said:
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
Click to expand...
Click to collapse
Yes. 8)
OK - did some work on this.
I decided to cut the earplugs off of the supplied headset, and attach a 3.5mm socket.
I now have a custom XDA mini lead
All works, however volume from car stereo speakers is extremely low. Any ideas? (Yes, I have checked car volume, phone volume and headphone volume!)
Cheers
Carl
jackleung said:
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
Click to expand...
Click to collapse
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
I found my mic was cancelled with the Mini, hence the custom cable.
hope this helps!
monster said:
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
Click to expand...
Click to collapse
I think my adapter is just a standard 2.5mm to 3.5mm converter. I tried 2 different adapter (one from Radio shack and the other one from ebay: http://cgi.ebay.com/USB-CABLE-headp...ryZ15040QQssPageNameZWD1VQQrdZ1QQcmdZViewItem)
Both are working for me (I will try again today and confirm U tomorrow), therefore I think yr problem is in the exec hardware itself.
To Carl,
Yr setup will not work since yr supplied headset adapter has at least 4 connection on the plug compare to 3 on the standard one. The extra connection is for the mic. If U cut the wire like this:
<---- X --- mic+volumn control ------ ear plugs
Then U can no longer use the mic w/ the custom wire. But if U:
<------- mic+volumn control -- X ---- ear plugs
then the mic on yr mic+volumn control will pick up the voice
hi jackleung
Thanks for the reply - the lead was cut after the mic but before the earphones.
This was because a standard lead with a 2.5 / 3.5mm adaptor didnt work.
My only issue now is the low volume!
Cheers
Carl
I tried it on my Imate Jam again. My mic on the Jam still works (eg: Voice Command via Cyberon Voice Dial. So do phone conversation) even I use my 2.5mm/3.5mm adapter to connection it to my car stereo.
Hi,
I did the same for me and a friend of mine with a Univer..er - Jasjar and connected this to an FM transmitter - We have excellent sound quality, volume and the you can still answer calls by pressing the Mic Button
Frikkie
(If you are gonna be late - dont rush, else someone else and YOU will be cross)
check connections?
I have done exactly what you did, put a 3.5mm socket on the end of the included handsfree cable.. volume is fine, and i regularly connect it to the aux in the car, and multiple sets of headphone/speakers...
The best suggestion to your volume problem is to try again.. i know i had issue with the stereo channels getting screwed up (and even combined at one point) and it was just trial and error getting the connections clean..
You have to ensure that both the shaft and tip connectors on the socket are grounded to the shared ground on the circuit board.. otherwise the audio will probably be less than perfect.. check for dodgy soldering/connection.. coz i can assure you that your theory does work!
Dan
There is another topic on this here.
The person from there uses:
http://www.expansys-usa.com/product.asp?code=PPCPADPT02
which has two 3.5mm plugs.
Description: It has a 2.5mm plug at one end (this plugs into the PocketPC) and two 3.5mm sockets at the other end (into which you plug your 3.5mm headset or headphones).
My question was: could I put a standard 3.5 car kit mic into this 3.5 headset jack (the one with the mic)? Would the mic work if I plug it into a headset jack?
I assume the other one (headphones = stereo only) I will plug it directly into my car auxiliary via a 3.5mm to RCA cable, right?
Hi all i am making a custom headset. I have looked all over for a schematic of the 3.5mm jack plug for my spvm5000. If anyone can help many thanks.... :wink:
Bushy
I have this cable that plugs into a 2.5mm jack and on the other end are RCA connectors for a TV. Does anyone know if the headset jack on the bottom of the WIZARD has video compatibility or if it does, do I need some program to route the video to the TV?
Any help would be appreciated.
No, I'm pretty sure that the jack is audio out/mic in only. Sorry.
This is my scheme for magician audio connector if someone wants to make headphones for his phone...
hi,
my magician audio port left channel is busted, i am planning to change it or replace it with normal audio port (3.5mm jack) compatible. does anyone from here know the schematic diagram of magicians audio port? or know some compatible audio port?
thanks.