EVERY TIME I REBOOT MY XDAII, I KEEP GETTING THE FOLLOWING MESSAGECANNOT FIND incsp20 OR ONE OF ITS COMMPONENT .MAKE SURE THE PATH AND FILNAME ARE CORRECT AND ALL REQUIRED LIBRARIES ARE AVAILABLE)
SINCE I AM AN ILLETERATE IN POCKETPC I DO NOT KNOW WHAT TO DO AND I DO NOT KNOW HOW TO GET THIS FILE OR LOOK FOR IT,CAN ANY ONE HELP ME PLEASE
well it sounds like there is a shortcut in windows\Startup
to a program called INCSP20.exe
which is not located the place that the shortcut indicates
you could
try and move the shortcut out of StartUp
or make a new shortcut to the place that INCSP20.exe is located and
put that in the startup dir
if it's needed for something
thank you rudegar
thank you rudegar
but how can i do what you told me to do.
well i always use total commander
http://www.ghisler.com/pocketpc.htm
but i suppose you can also use file explore which is already on your pda under programs in the start bar
then you navigate to the dir
windows\Startup
and remove the entry called INCSP20
(you may want to copy it somewhere else just in case you need it for something)
but how you make shortcuts or edit them in file explore i dont know
it's easy with total commander
I don't mean to ask silly questions, but I can't seem to manage a simple installation. I download the "WM VI Black Cyberon Voice Dial" cab and would like to install it, but have no idea where to begin!!! Could someone please help me with some step-by-steps? I would like to try this out instead of the MS Voice Commander. I also downloaded the "WM VI Black Cyberon Voice Commander" just in case, and would love to find out what works best on my Hermes. I would appreciate any help that may come my way.
:-D
save it on your storage card and run it from the file explorer on the phone.....?
What to run . . .
Do I "execute" the _setup.xml file? Will that copy everything needed to everyplace required?
Execute the xml file? What have you done to the file already?
Copy the complete cab file (don't try and extract anything) onto your phone. Then (through file explorer) double click or run the cab. The XML file etc should all be within the cab and you should not even need to know about it. The cab should run on your phone as it is.
Heres a very simple and very small program I made with MortScript. I call it QuickReboot 1.0. It will ask you if you whant to soft-reset your phone. It works best if you map it to a hardware button, well, It does for me.
READ! VERY IMPORATANT HOW TO USE: Unzip the zip file and move the file "QuickReboot" to the My device folder (The root of your device) Then click on it. It will then make a shortcut to itslef in the programs folder. Then use it whenever you need to soft-reset. TO UNINSTALL IT: Open your file explorer and goto /Windows/start-menu/Programs and delete it from that folder. Then its completely gone from your device
IF YOU TAP ON THE FILE WHEN ITS NOT IN THE "My device" FOLDER, IT CANNOT MAKE A COPY TO "Programs" FOLDER!
Requirements: Mortscript 4.0
(You need MortScript 4.0 to use QuickReboot)
If you don't have mortScript 4.0 download here: http://www.sto-helit.de/downloads/mortscript/MortScript-4.0.zip
Free and NOT SPACE-TAKING
Cool, im gonna try it on my TP. thx
thanks and correction
first of all thanks! that's exactly what i was looking for.
second, i had to edit your code a little because the copying didnt work. your path was ".../start-menu/..." and should have been ".../start menu/..."
Is it possible to add an .exe file to the program group and in that way make a short cut to it. (The .exe file is not installed, but simple copied to the phone).
If not it is only possible to run the .exe file from the file explorer
/Michael
you can make shortcuts with totalcommander and paste them to /windows/startmenu/programs
then u'll see the linked exes in the program list
Hello!
Now I found a way to Edit DLL, EXE, MUI and all other files for WM5 and WM6!
I ever had problems with the Signature in the Files bur now i have the Solution!
In This package i attached, there is a UnSigner, Signer, Editor and the Certificate for the Phone!
Step1:
First you must Unsign the file you want to edit!
Just go into the Unsign dir and drop the file over UnSigner.exe.
A DOS-Window will popup for a short time, the file is now unsigned!Step2:
Now you can edit the file! I placed the reshacker into the package...
Step3:
If you edited the file successfully, you must sign it again!
Go into the Sign dir and open siggner.exe. Then choose the file you edited and take the "SDKSamplePrivDeveloper" Certificate.
Press "Start sign process" and close it
Viola, now your file is Modified and signed!!!
thx 4 tools in one place.
Method is rather..known, but good.
Hi,
thanks for your good work.
wfg
starbase64
thx nice works i need that
great software suite thanks
i tried this but still cant copy into the \windows\ directory, i can copy from from \windows\ dir tho
thx 4 share.....
gh0st- said:
i tried this but still cant copy into the \windows\ directory, i can copy from from \windows\ dir tho
Click to expand...
Click to collapse
I have not figured this out myself eather, i read "everywhere" to use activesync, but how do i copy a file trough activesync?
schreda said:
Hello!
Now I found a way to Edit DLL, EXE, MUI and all other files for WM5 and WM6!
I ever had problems with the Signature in the Files bur now i have the Solution!
In This package i attached, there is a UnSigner, Signer, Editor and the Certificate for the Phone!
Step1:
First you must Unsign the file you want to edit!
Just go into the Unsign dir and drop the file over UnSigner.exe.
A DOS-Window will popup for a short time, the file is now unsigned!Step2:
Now you can edit the file! I placed the reshacker into the package...
Step3:
If you edited the file successfully, you must sign it again!
Go into the Sign dir and open siggner.exe. Then choose the file you edited and take the "SDKSamplePrivDeveloper" Certificate.
Press "Start sign process" and close it
Viola, now your file is Modified and signed!!!
Click to expand...
Click to collapse
THANKS! Your pakage was very helpful to me and the two certificate cab's did it for me. Now i can translate my M2D into Swedish.
ToddeSwe
i want to modify a dll file
hi, I want to modify a dll file called invdb32.dll in this file an option is block i want to open it, any body help me?
[email protected]
good job! thanx dude
Is there a way we can view the images instead of a bunch of numbers and stuff? BTW great job man! Thank you!
Thanks for sharing
Is this can work with Windows vista
modify the manilla2d exe with this to support animated weather other than rain???
Can i use this to change the Samsung Omnia Menu to different programs being shown? Instead of TouhPlayer Kinoma?
I was able to unsign, modify and then sign a DLL file. But when I opened it in PE Explorer to check it, it gives me errors that the file is now too long. Take it you can't make additions, only changes?
EDIT: Here's the exact error I'm receiving, not sure if it's fixable or not;
03.01.2009 21:03:04 : EOF Extra Data From: 0008C400h (574464)
03.01.2009 21:03:04 : Length of EOF Extra Data: 00001948h (6472) bytes.
03.01.2009 21:03:04 : EOF Position: 0008DD48h (580936)
03.01.2009 21:03:04 : Error! (Step: Examining Exports)
03.01.2009 21:03:04 : Errors detected! Opening file in SAFE MODE...
03.01.2009 21:03:04 : Done.
the original file showed the following;
03.01.2009 21:02:25 : EOF Position: 0008C400h (574464)
03.01.2009 21:02:25 : Done.
converting dll to VGA
hi, i need expert help from any of you to kindly convert this enclosed dll file to VGA 191dpi for my Raphael. this file is part of PHM ppc Plus to enable clibboard in SIP. thanks in advance for your help
MEditor: Simplicity
Hi guys,
I've decided to make it quite a bit easier. Just open up the attached .zip
file, extract the MEditor to Program Files, and double-click Install Context
Menus.reg (confirm if a warning pops up).
Now, to edit a dll, mui, or exe file, just right-click on it and press Edit with
ResHacker. Once you're done editing, just save the file, close ResHacker,
and it'll take care of re-signing the file for you
How it works
I didn't mean to make this post a big deal, but I'd just like to explain how this
thing works. I've added the necessary registry files for adding or removing
(if you choose) the Context Menus for "Edit with ResHacker". It calls
C:\Program Files\MEditor\open.bat, which opens a batch window (do not
close it until you're done editing, it will close itself) that removes the
readonly, archive, system, and hidden attributes off the file, then unsigns it,
then opens ResHacker.exe to edit it. When you close ResHacker.exe, it
automatically signs the file and adds the readonly and system attributes
(hidden and archive aren't necessary). Not very complicated if you think
about it, but it's what I use
smotrs said:
I was able to unsign, modify and then sign a DLL file. But when I opened it in PE Explorer to check it, it gives me errors that the file is now too long. Take it you can't make additions, only changes?
Click to expand...
Click to collapse
Same problem. Internal adresses are being messed up. Tried expanding array in IDA and adding complimentary bits in HEX Editor. No luck. This has to be possible right? Shifting the entire code a few bits as to add a few characters here and there? Please someone, this is driving me nuts.
Help On exrtacting the *.dll file from windows folder
Hello has any one been able to remove the file from the windows folder tried resco and total commander but in vain ..
Awaitin help...