After several ROM/Radio upgrades the problem continues the same. I'm using SKYPE quite a lot. Unfortunately if the distance between the router & the QTEK 9090 is more than +-5 meter, the connections breaks up after +- 2 min & people cannot hear me anymore. I can still hear the contacts talking, but also let's say about 30 sec later, the connection breaks completly up. What is actually happening is, that the WiFi blocks. I cannot recontect the QTEK 9090 to the router (through Wifi) unless I do a software reset.
On the other hand I can, fe listen to music watch internetTV at a distance of let's say +100 m without problems.
Can anyone help me with this problem.
Thanx.
I have the same problem with Skype over Wi-Fi. It used to work fine with Radio 1.06, but after upgrading I've always had problems. Btw I have a Qtek 9090 as well... hopefully is not hardware related!
Hi guys
I have a small problem in that when i use the phone as a modem via bluetooth, after about 5 mins it just hangs (according to my laptop im still connected), so i have to disconnect and connect and works for another 5 mins.
It doesn't happen with usb connection only with bluetooth.
any ideas?
bashi007 said:
I have a small problem in that when i use the phone as a modem via bluetooth, after about 5 mins it just hangs (according to my laptop im still connected), so i have to disconnect and connect and works for another 5 mins.
It doesn't happen with usb connection only with bluetooth.
Click to expand...
Click to collapse
i've noticed similar problem two days ago, acutally it wasn't 'hanging', but bluetooth in Vario II just.. turned off by itself. it happened twice, but i didn't have time to investigate it further more.
I just configured my 2day old TyTN for dial up networking via Bluetooth. I've been surfing and checking email (Edge no HSPDA here) for 1hr and 17 min's without a hang up. Running at about 50k per dsl reports.com . It loads pages about twice as fast as my k jam and has not felt warm at all. As I recall the k jam heated up with that much use.
I have been getting very sporadic performance from this application. Sometimes I can connect immediatly, other times I have to reconnect or restatr ie on my laptop multiple times to get a connection. Then it may stay stable for hours, or disconnect me within minutes. Is anyone else experiencing this? Maybe I need a hard reset or reflash. Any info is appreciated
I have the same setup, except your spl. I installed the new ROM last night as I just got a new 8525 via warranty replacement as my last one died last week. ICU wouldn't stay stable at all. I tried both My ISP and MediaNet. No dice. It would work for about five minutes then my laptop wouldn't recognize the 8525. I would have to turn off and turn back on the phone to get another five minutes. Any suggestions?
Hey guys. I have a G1 with Cyanogens latest.
So I have BT linked and paired to my car.
Prior to switching to cyanogen rom and doing the radio update required to do so, I had no problems with BT.
I was on the latest JF (without a hitch).
Now, it will constantly disconnect.
Sometimes it'll be a few minutes after connecting, sometimes it'll be fine for like 10-15 minutes and then disconnect me during a call.
Does anyone know what the reason could be?
I'm guessing the radio update but it could just as easily be the rom.
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
Seems to be a one time event with the data problem but the main thing keeps annoing me
Have you tried pulling the battery waiting 60 seconds placing the battery back in the phone and then rebooting?
Eh no cause on the galaxy tab the battery cant be removed
NightFire123 said:
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
thanks
Click to expand...
Click to collapse
I don't Know, but if you have a Bluetooth PAN connection to the internet, then it should be not possible to have another connection to the internet. IP routing to the gateway would be confused if you could.
There are tools that "group" several separate internet connections into one virtual one.
no Im not using a bt PAN to connect the inet, only normal bluetooth data usage
Push
Just only me who is facing this annoing problem?
Same problem with OBD2 :s disable GPS reduc freeze loop. But not fully (30 minutes). Next time i will turn off Data conection.
Every time i've freeze now i see torque try reconnect to OBD2, seem like BT of SGT turned off or time out
I am having the same problem. As long as I have bluetooth turned on, it will hang the Tab within 30 min. All bluetooth connections are definitely gone. Turning off the bluetooth won't help. The only way is to reboot and never turn bluetooth on.
BTW, I have tried connecting LiveView or a normal bluetooth headset. Both cause the same problem.
I am on JK2.
It seems it is bluetooth driver conflicting with any other data connections.
Did a further testing. Disabled Wifi, but doing data communication via 3G network while turning bluetooth on. The tab hangs in a few minutes. Found a process called 'btld' sucking up all the CPU circle.
Any ideas what 'btld' is?
Thought this should not be a hardware problem because bluetooth works fine when all data connections are off and Wifi/3G data works fine when bluetooth is off. It must be some sort of default setting isn't correct. If this is the case, then root would be a must before manually tuning any parameters.
Found root cause. It is actually the SonyEricsson LiveView software causing troubles. After removing, everything goes well.
Checked on SonyEricsson's web site, it seems Froyo is yet to be supported.
try to use WO Webcam B-Lite out of market, you can open a bt connection by pressing activate and then while running, close via taskmanager, voila the freeze begun
I've got galaxy Tab and galaxy S, and torque badly freezes the devices almost every time I exit the application. It cannot be an hardware fault since I use lot of bluetooth devices and always 3g connected, never had issues. Just with torque, and I don't have any "sony liveview" thing.
Reading on the comments of Torque it seems that also other devices have the same freeze issue (especially a phone called "Evo 4G"). Many months ago I sent a mail to the developer explaining the bug but he bumped me away replying that the app is tested and working on GalaxyTab (and obviously it's not true, or he did some mistake in testing). Now lots of people with this Evo 4G are complaining and the developer is trying to fix. let's hope..