Database Users

Sticky French ROM.

I’m stuck with a minor problem and have spent more than a week trying to fix it. :?
STORY
To replace an O2 3.20 Eng on PCC 2002, I have cooked a French Rom based on 3.16 Qteck and included the freeware I liked, one of them being a freeware named POI (Point Of Interest) to be used with Tom-Tom Navigator.
ORIGINE
My problem is that I think, installing POI on ROM, was a silly choice of me as I cannot save any modified settings of POI such as setting for Speed cameras. :evil:
PROBLEMS
Pb N° 1. : I cannot save my POI settings. I get no really error messages, but all is gone next time I open it. Does any one have a clue?
PB N°2: As I had no clue, I decided to cook a French ROM without POI in it. But I failed to reinstall the newly cooked ROM after downloading the EXE file and running it, my PC opened DOS windows with an error message saying ERROR UNSUPORTED LANGUAGE ‘FRA’ prior to opening the Program A window. Then Program A gives me an Error 007 No Rom Image File … Cannot find ROM image to upgrade you Pocket PC.
PB N° 3: I decided to build an English ROM on 3.20 UK. as it seemed that French language may be the source of PB N°2. But after downloading it and running the exe file on my PC , a DOS windows opens and close then nothing would happened.
PB N°4: I decided to use XDAtools to flash my original XDA ROM (saved in the first place on my PC) back to my XDA, but XDAtools refuses to write to my XDA memory through Program A saying error opening c:\...\English\ for writing Access refused. Error opening the target device. “
I have no idea what XDATools tried to open so I cannot either go that root neither.
I now quite perplex on how to solve question N°1, or at best getting BP N°2 to work.
Any hint :?:

Upgrade to WM2005 + compact framework 2.0

After a lot of trouble I finally succeeded in installing WM2005 on my SPV c500.
Background of this is that I also want to install Compact framework 2.0 and do some development.
However after the installation of CF2.0, restarting of the gsm results in a hang up when the sim-code has to be input....
After a while an Windows error message occurs ...asking me to send de error log to MS, which has no use because WM2005 is an illegal version...
Has anyone any idea what's the cause of this, or better knows the solution to this problem?

Try to turn off the input of SIM code. Sometimes it's buggy in this version.

Thanks, that seems to be working for the moment...

Hi...
where did you find the rom ? The Typhoon folder on the ftp is *emtpy* ...
/johnny

http://ronswens.technoboard.ws/

I stop wasting my time trying to upgrade to WM5. WM5 for this gsm is very unstable.
Lots of succes to everbody.

I'm in the same boat as Freeck, but I really need to solve this problem if at all possible. Does anyone have any information or leads at all on why installing .NET Compact Framework 2.0 on ronswens' WM5 (on Typhoon obviously) causes cprog.exe crashes on the next reboot? Even if it's just background info or a "you're doomed, ha ha ha!", it'd be helpful at this point .
Thanks in advance!

Download the last version of SPV-Service client from here.
Extract all the files from archive to some folder on the PC and run SPVServices.exe (press OK on the phone when it ask to install TyphoonNBFTools.dll).
Click 'CID Tool (Alpha)' on the left and press [Set CID = 11111111] on the right. Wait untill it's done.
Click to expand...
Click to collapse
When i open SPVServices.exe it just opens up this app on my pc that says RAPI INIT OK or something like that, but no prompt on the phone to install TyphoonNBFTools.dll

Microsoft .NET Compact Framework 3.5 RTM (*Fixed" download now)

see here: http://forum.xda-developers.com/showthread.php?t=347537

Does someone has an OEM-Package of it?

pls upload to another host, like mediafire.com, I can't download from ftp.
thanks

maxstegi said:
Does someone has an OEM-Package of it?
Click to expand...
Click to collapse
yeah, do you have the oem for it ?

medkid said:
yeah, do you have the oem for it ?
Click to expand...
Click to collapse
No, otherwise I would not ask.

Rapid Share Links
inside you will find:
NETCFv35.wce.armv4.cab
NETCFv35.wm.armv4i.cab
NETCFv35.ppc.armv4.cab
http://rapidshare.com/files/74438597/NETCFv35.zip
Enjoy,
NAdavi

For those using WM5 & WM6 should be using <NETCFv35.wm.armv4i.cab>.
I have tried the beta somewhere in September.
To see the wonders of 3.5, take a look at one of the Apps called <SimpleOS> which uses 3.5.
http://www.xdaflameusers.com/viewtopic.php?pid=789#p789
Here is my experience,
I am using O2 XDA Flame which come with default .NetCF v.10 until I come across <SimpleOS> which need v3.5, so I install v3.5 beta just to try out <SimpleOS> without installing v2.0. So some other Apps which needs v2.0 did not work at all.
Not sure if the problem is in the Apps using .NetCF v1.0/v2.0 or the problem is in the .NetCF itself.

V2.0 Removal?
I picked this up in a thread "Serious Problem Here.." in the Hermes Mobile 6 forum. Seems to indicate that V2.0 does not need to be removed before installing (in this case) V3.0.
I installed my V2.0 using an .msi file from the PC using ActiveSync 4.5. I don't see it listed in the Remove Programs list. I would like to remove it but see no way of doing so. Many others probably installed V2.0 in a similar fashion (from the MS web site). Am I correct in assuming that, if not cooked into the ROM and installed later using an .msi file from the PC, V2.0 probably can't be uninstalled?
.Net Framework co-existence
--------------------------------------------------------------------------------
Quote:
Originally Posted by newnoise1024
Bootloader Version: SPL-1.40.01pro
IPL-1.01
i just tried to install Framework .NET 3.0 and got this error message
[04/20/07,08:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:35] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed.
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
i uninstalled any previous version, is there something i'm missing?
You're probably missing version 2.0 of the .NET framework. .NET Framework is to be left in place once installed. You should have left V 2.0 installed and added .NET 3.0. Go to www.microsoft.com/net and get version 2.0 redistributable re-installed on your machine. (If you can). If you cannot, search the KB and you may get by without rebuilding your OS.
__________________
HTC TyTn - HTC Official - But for how long?? 3.54.255.3
1.48.00.10 Radio
SPL v2.10 Olipro
T-Mobile Dash - Official WM 6.0
RTFW - Then Mrvanx's GUIDES!

here is the oem.
http://forum.xda-developers.com/showpost.php?p=1713452&postcount=1

FAMAN said:
here is the oem.
http://forum.xda-developers.com/showpost.php?p=1713452&postcount=1
Click to expand...
Click to collapse
hi, thank you so much, I have a question, how do you get the registry from those cabs ?
Any differences between NetCF and Sqlce ?
thanks

For anyone that finds this and needs what I needed...to get this loaded on their phones...I had the wrong thing at first.
Need to get...NETCFSetupv35.msi from microsoft.
Running this from PC installed right onto my HTC Fuze no problem. (I am on active sync)
The instructions for running cab showed up on phone screen and I just installed to device and not my card. (No reason why, other than made sense to me.)
I needed this for the Advanced Config v3. Without this all I got was an error saying that it needed newer .Net than was on phone. File now saved for posterity and future flashing.

problem installing Power Toys for .NET CF 3.5

I ran/installed .NET cf 3.5 from the microsoft website into my phone's main memory and it said installation was complete. Then I try to run/install Power Toys from the microsoft website and it says I have to install .NET cf 3.5 first. Why is this happening? I can't figure it out and can't find the solution anywhere.
In case this helps, this is the process I went through. I saved the .NET cf 3.5 installer into my desktop, then ran/installed it into my phone. It asked if I want to save it in my device or storage card, and I chose device. It then installed successfully. I never had to transfer any cab files (is this where I went wrong?? I don't see any cab files to transfer). When I explore the files in my phone, I don't see any icon I can tap to run .NET cf 3.5 (do I have to do so to officially install it??)
I'm all confused...help

You have install it, but you're windows is still using the build in 2.0 (it's a reg key), try the cab in attachement (.net configurator) it will change the key for you forcing app to use the v3.5 and after restart i think you could install your power toys, but why ? could you tell me .
PS: you don't have to launch .net, the app that needs it use it without telling you.

N'da said:
You have install it, but you're windows is still using the build in 2.0 (it's a reg key), try the cab in attachement (.net configurator) it will change the key for you forcing app to use the v3.5 and after restart i think you could install your power toys, but why ? could you tell me .
PS: you don't have to launch .net, the app that needs it use it without telling you.
Click to expand...
Click to collapse
Hey, thanks for replying. The net configurator cab you're talking about is actually a smart part of the Power Toys file I'm trying to download, so I don't understand why it says I have to "install .net cf 3.5 first", even though I've already installed it and my phone says I have both v2 and v3.5. I dunno, I actually hard resetted my phone and will try again later, ha.

Use a cooked rom, if you have hard reset take the time to flash all the cooked rom here have 3.5 inside and 2.0 out, it speed up windows and most of all apps.

[TUT] Recovering Bricked 910c/914c with HP Software on Windows XP/Vista/7

Recover your iPAQ 91x with HP's ROM Update Tool on Windows XP/Vista/7
Hi guys,
I have just bricked my iPAQ 914c while mistakenly installing Manila BETA 0.5c whis is for 614c.
Here is another thread about recovering but since I am on Windows 7, my system gave BSOD while trying this method.
P.S. Driver files were 10 years old, from 1999
Forget it....
Her is the new and if you ask me, the perfect, easy and the secure way:
1- Download the latest official ROM from HP:
ftp://ftp.hp.com/pub/softpaq/sp43001-43500/sp43434.exe New ROM!
2- Don't install it, extract is using WinRAR, 7Zip..
3- Inside the sp43434 folder you will find a file called "hpRUU.exe". Right click>Properties>Compatiblity Mode>Windows XP SP3>Apply>OK, again Right click "Run as Administrator"
4- Accept the agreement and click "Next", the software will look for iPAQ 914c state....
5- Connect the USB Cable (Device is turned off)
6- Now press Volume UP (Left side) + OK (Right Side) + Power Button
7- Device will Boot up in RUU Mode since it is connected to PC via USB Cable. During boot up while hpRUU.exe is looking for device stage, it will find your device and ask you to update.
8- Press "Update" and the process will begin. After flashing all the parts, which takes about 5-10 Minutes, your device will be up and working...
Note: Somehow if the update process gives the Code 402 USB connection error, close the hpRUU.exe and then open the "Configure.ini" file. Inside that file edit the TIMEOUT value to "1000". After that start the procedure form the beginning.
The rest is up to you
That's it. Thank you for reading.
Special thanks to sergious for creating Manila BETA 0.5c ROM for 614c. Without his ROM I couldn't brick my 914c and you were not going to get this tut.
Recep Baltaş

thanks
Would that works on Windows Vista ?

You took my ROM from 614c and flashed it on 914c?? hehe lol
BTW thanks for tutorial

sergiorus said:
You took my ROM from 614c and flashed it on 914c?? hehe lol
BTW thanks for tutorial
Click to expand...
Click to collapse
OMG was it for 614c? I mean i am not kidding, seriously I thought it was for 914c
Nevertheless we have a new guide.
bangelius said:
Would that works on Windows Vista ?
Click to expand...
Click to collapse
Dude, it worked on Windows 7 Build 7077 Why not in Vista?

Added new workaround for the Code 402 USB Connection error and replaced the HP ROM Update link with the new one.

i want to ask about the last HP update for iPAQ 910 the sp43434.exe ..
when i try to flash with the binary file it says mine not compatible with the update.. so i tried to flash with SD boot load .. but it just make things worse, my ipaq is bricked.. so i wanted to go back to BJ's motherloads rom thru SDbootloader but no success..
after i read http://forum.xda-developers.com/showthread.php?t=459123
i finally got out from boot screen..
i haven't try to download image of sp43434.exe into my ipaq using DNW.. is there's any chance?
or should i wait ROM author to adding the update into his/hers latest ROM?
what with sp43434.exe update? is it major update?
and why my ipaq is not compatible? (mine is FB051AA#UUF)

AbsolutBenz said:
i want to ask about the last HP update for iPAQ 910 the sp43434.exe ..
when i try to flash with the binary file it says mine not compatible with the update.. so i tried to flash with SD boot load .. but it just make things worse, my ipaq is bricked.. so i wanted to go back to BJ's motherloads rom thru SDbootloader but no success..
after i read http://forum.xda-developers.com/showthread.php?t=459123
i finally got out from boot screen..
i haven't try to download image of sp43434.exe into my ipaq using DNW.. is there's any chance?
or should i wait ROM author to adding the update into his/hers latest ROM?
what with sp43434.exe update? is it major update?
and why my ipaq is not compatible? (mine is FB051AA#UUF)
Click to expand...
Click to collapse
First of all i have no idea about DNW. But the sp43434.exe is not a major update...and it is not for your ipaq. Anyway....never mind...install WM 6.5

cool_recep said:
First of all i have no idea about DNW. But the sp43434.exe is not a major update...and it is not for your ipaq. Anyway....never mind...install WM 6.5
Click to expand...
Click to collapse
Or try this one:
http://forum.xda-developers.com/showpost.php?p=3646163&postcount=1

Updating Hp 914c
Hi guys,
i ve tried to update my ipaq many times( more than 15) on vista and windows 7. i did everyting hec editor, nf0 files etc..
then i tried smthng else, just installed xp one of my laptop and active sync as well. plugged ipaq to laptop and it recognized it (it was in ruu mode)
i started hp update sp43... what ever.. and it was success.
this is best way believe be

thx for the help. now my 914 works again

awesome instructions...worked like a charm. I also goofed and flashed a 614c rom to my 910c...you saved my hp - thanks!

You are welcome... And bump since Windows 7 is more and more popular

Hi.
I had issues after installing the ROM from HP. I did the SD loader method which did not work. But I still mnaged to get out from the RUU mode by pressing camera+volume up.
I tried your method. Still did not work. Now I am stuck ni RUU mode. Tried getting out of the RUU mode to try other mthods but this time I can't get out of RUU. Uhmm.. any known solutions?
Cheers!

Sorry Pal. Switched to Android

hola buenas noches necesito un favor por accidente instale el rom del wm6.5 del 914 en un hp ipaq 610c como recupero el telefono realizando un flasheo original borrando rastros del sistema operativo, ademas el sdloader esta bloqueado me sale error update file pls check y no me permite formatiarlo por aqui, cuando inicia el wm6.5 la pantalla aparece titilando demasiado rapido y no permite calibrar la pantalla, alguien conoce un programa que me reconosca el celular y me permita formatiarlo de cero. thanks

Finally
It worked perfectly, I only had to change the timeout in Config.ini to 9999 because 1000 wasn't enough. Thanks for your post, I think I love you now.