Related
After Flash ROM by use SD-Card. Although CheckSUM is OK!
I reset and nothing work. I can't do anything, enter bootloader, hard-reset, soft-reset, connect with PC, nothing.
Help me plz.
I really need it for my job.....!
My device is O2-xdaI
Thank
Which ROM did you use ?
Where did you get it from ?
I used xdatool to build bootloader and winCE to SD-Card.
It's xda-developers Special Edition.
I don't know which version.
I used xdatool to build bootloader and winCE to SD-Card.
It's xda-developers Special Edition.
I don't know which version.
Kavin,
I'm not the most experience guy on this forum for this. I'll not be able to diagnose right away what you may have done: What has happened.
Let me summarise what you said with the missing information ?: )
You had a working XDA1 using the following:
- Bootloader version: :?:
- Rom version : :?:
You tried an upgrade getting the pre-cooked Special Edition ROM based on PPC 2002. You :
- Dowladed the ROM in the format :?: (exe, Nbf, Nb1)
- copied it on an SD card using XDATools
- Flashed it to your XDA using XDA Bootloader mode version :?:
and now your XDA seems to be dead.
After your clarified the missing point, I have one more question :
- Can you enter into bootloader mode at present ?
Yearh........! exactly!
Thank Tanguy so much.
Anh previous bootloader is v5.15. Maybe ROM version is v3.12.00.
Now I can't enter booloader.
I tried to tap and hold Power Button then press Reset. So, nothing happen.
I can't lost my xda. I't very very Important device for my job.
Kevin,
Again, I'm not the most expert on this.
What looks surprising to me is that you have lost access to Boot Loader after a ROM upgrade. I'm confident you'll bring your XDA back to work as I never seen post like this which did not get resolved.
My advices are:
- Search this forum on this topic (dead boot loader) to understand why. I'm confident you will be able to correct this situation.
As a start point, try this http://forum.xda-developers.com/viewtopic.php?t=3274&highlight= or http://forum.xda-developers.com/viewtopic.php?t=12991&highlight= http://forum.xda-developers.com/viewtopic.php?t=12925&highlight=
Possible next step, in the XDATools there is an option to Fix Boot loader. I have never used it. It may solve your case. If that were for me, I'd spend what ever time is necessary to understand what has gone wrong before trying various tools to fix it.
Tanguy
i don't mean to be be a jackass, but if you unscrew your stylus, and stick the little plastic end into the little hole next to the headset jack, it should turn on. most people don't know that the device needs this to turn on after a romflash. it's called a hard reset, btw. hope this helped!
were can i download the xda-tool?
at first sorry, but my english is´nt the best.
i have a littel Problem:
DOS-box from C:\WINDOWS\system32\cmd.exe
print
ERROR: GetDeviceData - Eine vorhandene Verbindung wurde vom Remoehost geschlossen.
error getting devicedata
PROGRAMME A v1.09
break down
print
ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is properly connected.
In the search i found that i need for this Problem the SD-card methode.
for this way i need the xda-tool?
but even link doesnt work.
Can anybody help?
Thanks
Re: were can i download the xda-tool?
witzvolk said:
at first sorry, but my english is´nt the best.
i have a littel Problem:
DOS-box from C:\WINDOWS\system32\cmd.exe
print
ERROR: GetDeviceData - Eine vorhandene Verbindung wurde vom Remoehost geschlossen.
error getting devicedata
PROGRAMME A v1.09
break down
print
ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is properly connected.
In the search i found that i need for this Problem the SD-card methode.
for this way i need the xda-tool?
but even link doesnt work.
Can anybody help?
Thanks
Click to expand...
Click to collapse
Do you have an T-mobile ROM? If yes, you can only flash ROM via SD-card if you have a T-mobile ROM.
Download XDA-tool
I know, that i have to flashing ROM via SD-card, but i think i need for this the
XDA-tool!
And i can not find a correkt link for download this tool.
And i also dont know exactly how to use this.
Sory but i am a greenhorn :wink:
all will be o.K. :
i have found this link:
http://www.xs4all.nl/~itsme/projects/xda/OsImageTool.html
and with this tool i have flashed my rom.
greatings
VW
I've spent days and night trying to install a cab. file on my ppc without a succes now how a hell can I desable the certificate and signiture of this file.
thanks a lot for your help
You can try a program called certification off "Cert_SPCS.cab" it turns off the validation in WM5 (not sure if it works with later ROMs but worth trying)
Search for it.
Or go to: www.pdamagician.com/wm5software
I have already done it, still get the same message" installation was unsuccessful the program or seting cannot be installed because it does not have suffisient system permissions. Other solution will be highly apreciated, thanks anyway
Have a read of this thread, might help you !!
http://forum.xda-developers.com/archive/index.php/t-249863.html
The link here above did not help, thanks anyway. So again
is there any genius friend out there who knows how to unsigned cab, or disable signatures? 3 months waiting for a solution is too much.
Thankyou
Beny said:
The link here above did not help, thanks anyway. So again
is there any genius friend out there who knows how to unsigned cab, or disable signatures? 3 months waiting for a solution is too much.
Thankyou
Click to expand...
Click to collapse
Do you use a pocket pc device or a smartphone?
For pocket pc you can use my tool to turn off security.
So no prompt when you install or start an application with
no certificate.
Copy to device and start after some seconds a message box
is displayed with the result.
Houser
Houser said:
Do you use a pocket pc device or a smartphone?
For pocket pc you can use my tool to turn off security.
So no prompt when you install or start an application with
no certificate.
Copy to device and start after some seconds a message box
is displayed with the result.
Houser
Click to expand...
Click to collapse
Thanks Houser for your precious help, unfortunatly this did not work, I still get the same borring message concerning cab signature. What if we unpack the cab file, unsighned it and then repack it again. I wish I was a programmer!!
NB. The device is a pocket pc with WM 2006 onboard
Now lets get it strait, who can help me to re-build this bt patch for an Eten M700. This later can make the device compatible with a pioneer car headunit.
ThanksView attachment BT.ARM.CAB
Refer here for latest guide
http://karhoe.net/guide-upgrading-h...indows-mobile-6-update-september-06-2008.html
Sorry Karhoe - can't get the link to work. It's taking me to a "cannot display this page" error.
Very interested though (son's got my Typhoon 0 he may not care about it's OS but need something to FLASH!!!). Thanks.
Link was down because server was down, now its up again, gv it a try
Hi, karhoe, can you modify the download link to the final version.
Link in first post updated
connection error
I get a connection error during flashing step 5. I have checked all connections and used different cables. Any suggestions?
Peter
Did you turn on back your USB ?
What does error on Disk On Chip mean? What are we to do if we encounter such an error? error code =27
No idea, try to reboot you phone and repeat the process
I actually got the answer myself.. Said error occurs if you fail to press 0 on the boot loader portion of the ROM update process. Got WM6 now.. phone performance is a little slow than WM2003 but it is not that significant to return back to 2003se yet...
Thanks
Thanks for the thread your the man!!!
upgraded both my SPV C500 & XPhone II to WM6 without a hitch from not knowing a dickie about Flashing roms thanks for your tutorial and your link to the others great KARMA TO YOU--
The only thing i have come across is that when i start the camera iget an error message ("Unable to initialize camera-Failed to set up camera device") can you or anyone help out pls other than that it is perfect i would like to resolve this as i tend to use the camera & video a lot...
Thanks
You need to configure the camera driver, in the settings there
peterow said:
I get a connection error during flashing step 5. I have checked all connections and used different cables. Any suggestions?
Peter
Click to expand...
Click to collapse
still getting the connection error. It is the step before you turn USB off so it is on and synced before I start this step.
Thanks
karhoe said:
You need to configure the camera driver, in the settings there
Click to expand...
Click to collapse
I have done but still getting the error messange i have tried 0.3 & 1.3 and i get the same error for both BUT am i doing something wrong?
did you try to restart the phone after selecting the 0.3 driver ?
hi! please help me on the music buttons of my xphone IIm.... it's supposed to be a music edition of the xphone II... but now in WM6, music feature buttons dont work....
Some guy already fixed it,search in the Tmobile SDA thread
Hi everybody,
I would like to know if this version of wm enable the a2dp for the C500 (alias typhoon)?
thanks a lot
Upgraded my T-Mobile SDA to WM6, works great!
Unlock Error on SPV C500
I have tried searching the forum and cannot seem to get the answer i'm looking for but forgive if i have missed it:- When using SDA_Aplication_Unlock iI get this errror message (Phone cannot be unlocked) as soon as you click (Remove Lock) can any one shed some light pls.
I have even tried sim unlocker - or it it that simple that this phone just cannot be unlocked?
SPV C500 Specs:
Windows Mobile 2003se
Ver: 4.21.1088 (Build 14217)
Radio Ver:1337.032_0.03.18
Processor: ARM OMAP 730
Rom Update Ver: (No Data)
Operator: 4.1.1.4
I have another SPV C500 that i unlocked/ supercid/ upgraded with no problems also an XPhone II
Hey guys,
Everything goes smoothly until i attempt to instal the touchflo. I get this error message,
" .Net Framework Initialization Error - "To run this application, you must first install one of the following versions of the .Net Framework: V2.0.50727 Contact your application publisher for instructions about obtaining the appropriate version of .Net Framework"
Am I going to have to download the .Net framework program or is there anyway to bypass that? Thanx a bunch guys! Sorry if I sound like an idiot.
That's strange... I've never seen that because I've always had the .NET framework on my PC's since it came out... What OS are you using and how come you don't have it?
Most programs these days are coded in .NET, so if you dont have those components then they won't run...
What program are you running that says that?
I'm running XP Pro, but I usually uninstal the .Net framework because it messes up the way my computer runs. I'm trying to run the 1_upgrade_rom for touchIT 2.3 for the wing. It'll be mid process and then it shows the forceful disconnection. If i need to install the program does anyone have a link so that I can download it?
I had that issue .. i dont know how i fixed it, but im sure i ran this CAB
http://www.pocketemu.com/download7.html
So then you ran the cab on the Wing and then the problem stopped occuring?
yea, i didnt have any issues/ errors after the first install
Alright thanx man. I was about to try to run the installation off of my sisters computer. She has a shadow so I know she installed active sync. its frustrating for me to not have something i need because sadly im still running off of a 56k internet connection :'(
I just finished downloading it and it didnt install, it said that it already exists in the rom. Off to my sisters computer i go
This sucks, not even my sisters computer can run the installation.
First of all, I had some minor problems getting Activesync to recognize my 8525. (XP, Net 2.0). After a couple of driver updates or whatever, it finally worked!
I tried flashing to a different ROM but had problems during the HardSPL procedure. I stopped it, but THEN had some problems trying to connect my 8525 to the PC!! (Activesync again, ugh!) I uninstalled & re-installed Activesync like 3 times, and FINALLY got it to work again!
Now I have problems installing .CAB files to my 8525. I keep on getting the warning:
"The program is from an unknown publisher. You should install it only...."
I press "YES" and it comes as "unsuccessful".
I press "NO" and I get the "... program cannot be installed because it is not digitally signed with a trusted certificate".
Besides having installation problems, I also noticed that Activesync keeps on disappearing/uninstalling from my PC. I have to install Activesync 4.5 every time I turn on the PC.
Can some one tell me what's going on? What should I do? Should I do a "HARD RESET"? (I have done a SOFT RESET but to no avail). I would appreciate some help. Thanks!
I found out that I shouldn't do a HARD RESET because it will erase the "unlocked" feature in my phone. (I bought the phone unlocked).
I have researched the wiki, and some threads, and ACTUALLY someone else had this problem, way back in 2006. (The .CAB problem). But no one responded.
I also had to uninstall a program I had previously installed in my 8525 due to the fact that it stopped responding. It just wouldn't work anymore. I got the same "unsigned certificate" message.
I guess I'm going to RE-INSTALL Activesync ALLL over again. Maybe it will help it or something...
(This is literally going to be like the 5th time I install Activesync. And I just got the 8525).
IF ANYBODY CAN HELP ME WITH THE .CAB PROBLEM I WOULD APPRECIATE IT.
(I'm running WM6 Pro, AT&T)
freakin piece of crap!
its STILL NOT WORKING!!!!!
It USED TO WORK! I used to be able to install .CAB files. I have only installed 2 .cab files into internal memory (NO external. dont have one yet). I installed Opera Mini, and Wifi Radar. I also installed a couple of themes. I also installed animated themes but deleted them since they wouldn't work. (I think they required some other stuff). I also deleted all the themes except for one.
THEN one day, i tried doing that HardSPL-V7, and I got to the last step but quit since I got an error telling me that if I continue the (usb?)device could stop working.
Another time I tried installing SPB Finance 2.8 .CAB and that's when I noticed it would no longer install .CAB files. (It also won't install directly using .exe)
I researched Google and the forums, and found out a guy that had the same problem (no one responded).
Today I noticed that Pocket Wifi Radar wouldn't run. It said something about the certificates. I uninstalled it, tried to install it again, but it wasn't successful.
So far this has been the history of my 8525. Could it be because the "certificates" were installed in the ORIGINAL computer profile? Since I have installed Activesync many times, I noticed every time it creates a new profile. For example, the first time it was called "Windows PC". Then it was called "Windows PC2". Just right now I installed it again, and it was going to be named "Windows PC3", but I changed the name to something else, and of course it still didn't work.
Could ANYBODY give me some tips as to what I should do? Thank you.
go to settings>connections>usb to pc. uncheck "enable advanced network functionality".
if it syncs a few times with no problems run unlocker tool found in upgrades section. then hard spl then if you feel game enough upgrade os with one of your choice.
Hope this helps... cheers
holy cow, relax guy. you are not the only person to ever get the not digitally signed message.
http://www.google.com/cse?cx=000825...igned&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
as for the hardspl problem, i responded to that thread you created, didnt you see?
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
neojammer said:
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
Click to expand...
Click to collapse
dont hit stop dude, u're suppose to hit continue. hitting stop prevents the drivers from being installed and then the RUU wont run
Well I did press "Continue" the first time and I did not see any improvements. I just saw that it installed "HTC USB Sync".
I AM able to successfully install Activesync, I just can't get .CAB files to install.
Could it be because I pressed "STOP" whenever I tried using HardSPL? Should I try and run HardSPL AGAIN and this time pressing "Continue"?
Oh, and are you sure I'm supposed to press "Continue"? After all, I do get that error about Microsoft strongly recommends that you stop this installation. It sounds fishy pressing "Continue".
I just installed Activesync ALLLL over again, but this time in the D:/ drive... still the same .CAB problem.
Oh, and I no longer have the problem where Activesync would uninstall by itself. I noticed it fixed itself yesterday.
BUT I'm still having problems installing .CAB files.
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Try installing the SDK certificates and see if that helps
Finally Works!!!!! Hard Reset!
OK, so I've been up for about 3hrs straight trying to figure this out. Reinstalled/uninstalled activesync... tried installing HardSPL again (twice)... didn't work. So I was like, you know what...f* it. I'm going to do a Hard Reset. I'm just gonna try it.
IT WORKED!!!! AND IT STILL STAYED IN WM6!!!! And I think it's still unlocked (although I've read from threads that a HR will disable the unlocked feature).
I AM GLAAAAD THAT I CAN INSTALL FILES NOW!!!! YAY!! (hehe). THANKS TO THOSE WHO TRIED TO HELP!!! SERIOUSLY. It feels really bad when no one tries to help you, even though you don't have a CLUE as to what to do.
** I solemnly swear I will no longer try to use HardSPL or try flashing to a different ROM*. I will use the ROM that came with the phone, and be glad everything is WORKING **
*= at least for until a couple of more months
AND for those who are having this problem (and it's a lot of ppl, based from search results), try a HARD RESET. It helped me anyways.
"and like j-lo's this is a big but"
Glad it worked but I wouldnt allow one bad experiance to turn you off flashing... If I were you I'd still flash hard spl ( in case you find something that you really like). It DOES make it easier to fix "bricks". But just to satisfy your curiosity, go to bootloader and see if it says that you have 2.10 or 2.30 SPL. Also if you want to try flashing, try the sd card method. Its a heap safer (from my experience) than flashing by activesync. Check the wiki for how to do it.
PS. you dot need to reformat the sd card. if you have all the stuff you want on it then just copy the .nbh to the root of the sd card and rename to "hermimg.nbh", it will load as soon as the hermes is put into bootloader and you wont have to re-install anything. Works every time for me and I've done it about 30 or 40 times...Cheers......
ultramag69 said:
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Click to expand...
Click to collapse
i think his problem is that he can't install .cab files period. he's having the same problem as me. my first phone had that prob, i updated .net 2.0 and it was fine. got my second phone here, update .net to 3.5, but still can't transfer/execute ANY cab files to my phone. the pc just doesn't recognize the phone period. i can't copy/paste, can't push anything through onto my phone. it's crazy. so what else can we do? i'd like to think i'm pretty tech savvy, but this isn't cool LOL
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
geh said:
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
Click to expand...
Click to collapse
I've got the same problem. please help
sascha.egerer said:
I've got the same problem. please help
Click to expand...
Click to collapse
I finally done a hard reset, and now all is OK.
No other solution found.
geh said:
I finally done a hard reset, and now all is OK.
No other solution found.
Click to expand...
Click to collapse
Trying the same thing for my Diamond after trying out Android on it.
Same problem here. Running android 1.0 got me into this trouble.
(Running android 0.8 multiple times did not cause this problem.)
Did anybody find a better solution than hard reset?
Re
Same problem here cant run .cab files after trying run Android 0.8.
Damn , dunno why i tried to run Android 0.8