problem installing Power Toys for .NET CF 3.5 - Touch HD General

I ran/installed .NET cf 3.5 from the microsoft website into my phone's main memory and it said installation was complete. Then I try to run/install Power Toys from the microsoft website and it says I have to install .NET cf 3.5 first. Why is this happening? I can't figure it out and can't find the solution anywhere.
In case this helps, this is the process I went through. I saved the .NET cf 3.5 installer into my desktop, then ran/installed it into my phone. It asked if I want to save it in my device or storage card, and I chose device. It then installed successfully. I never had to transfer any cab files (is this where I went wrong?? I don't see any cab files to transfer). When I explore the files in my phone, I don't see any icon I can tap to run .NET cf 3.5 (do I have to do so to officially install it??)
I'm all confused...help

You have install it, but you're windows is still using the build in 2.0 (it's a reg key), try the cab in attachement (.net configurator) it will change the key for you forcing app to use the v3.5 and after restart i think you could install your power toys, but why ? could you tell me .
PS: you don't have to launch .net, the app that needs it use it without telling you.

N'da said:
You have install it, but you're windows is still using the build in 2.0 (it's a reg key), try the cab in attachement (.net configurator) it will change the key for you forcing app to use the v3.5 and after restart i think you could install your power toys, but why ? could you tell me .
PS: you don't have to launch .net, the app that needs it use it without telling you.
Click to expand...
Click to collapse
Hey, thanks for replying. The net configurator cab you're talking about is actually a smart part of the Power Toys file I'm trying to download, so I don't understand why it says I have to "install .net cf 3.5 first", even though I've already installed it and my phone says I have both v2 and v3.5. I dunno, I actually hard resetted my phone and will try again later, ha.

Use a cooked rom, if you have hard reset take the time to flash all the cooked rom here have 3.5 inside and 2.0 out, it speed up windows and most of all apps.

Related

How to install .net on XDA11i

Hi guys / gals
I have an XDA11i and want to add .net compact 2.0 to it so that I can run hitchhiker or wififofum etc .
How do I install the .net framework ? do I just add it to the active sync folder and let it get patched across ? or do I load it to another folder on the Pda and run it ?
Am having fun with my work network whih at the moment is stopping me down loading the file any way but I believe my It dept can get round that one for me.
Help greatfully appreciated
Astro1
I am a bit unclear:
In which format is the installation you have?
Usually you download the desktop installer from MS. (I believe it is an .msi file). Then you just connect you device, double click on the file on your PC and it does everything else automatically.
If you just have the .cab file, copy it to your device, then click on it from the file explorer (on the device).
That's it.
If you need to download it you can do it here.
Easiest way: dock your Alpine.
Download and run the .msi file from the Microsoft URL mentioned above (it's the latest version of the .net compact framework). Let the installation run its course, and as it goes it'll transfer the CABs over to your device and then they'll install. I don't think (if memory serves) any user intervention is actually required.
One soft reset later: bang, you're sorted.
Thanks guys
Took your advice and all sorted , as you said it does it all its self , no intervention .
Now have hitchhiker and wififofum all up and running although a big drain on system rescources .
Astro1

.Net Compact Framework v3.5

Most apps here require the latest .net Compact Framework. Here is v3.5 cab which works on Diamond/Touch Pro:
http://rapidshare.com/files/150399830/NETCFv35.rar
EXE:
http://rapidshare.com/files/130519938/NETCFSetupv35.msi
http://download.microsoft.com/download/c/b/e/cbe1c611-7f2f-4bcf-921d-2df718591e1e/NETCFSetupv35.msi
Remote Desktop:
http://rapidshare.com/files/151331556/Remote_Desktop.rar
.Net Compact Framework v3.5 + Remote Desktop:
http://rapidshare.com/files/151332489/Missing.rar
thanks but er
how do i install it?
i mean i installed once but i forgot..
and i formatted the phone
now i connect the diamond in activesync then run netcf... from my computer
then on my diamond theres the ''do you wanna install'' screen
then i click yes and it says install unsuccessful
the cab should run on your device, so just copy it over then run it
cab file name is: NETCFv35.wm.armv4i
okay thanks i will try that
hi, im getting install unsuccessful, untrusted certificate error message....
any ideas?
Thanks
Ed
no idea sorry.
here is another file that is missing:
Remote Desktop: http://rapidshare.com/files/151331556/Remote_Desktop.rar
Dude Is there A Cab I Can Just Install Threw My Phone My Pc Is Jacked.
Hello, I am trying to install frameworks to DiamondTouch , but the problem is that I am "green" , can You expain me how to do that ?pleasssse
Mirror link for cab file
http://rapidshare.com/files/304384771/NETCFv35-ALL-IN-ONE.cab
im using imate ultimate 8502 and running the windows mobile 6.1...
where could i find the .net compact framework v3.5???
thx
You can find it here:
http://rapidshare.com/files/304384771/NETCFv35-ALL-IN-ONE.cab
Can you make another download . RapidShare asks for Premium User which i don't have .
thanks a lot
It is not a big file and you can download it as a free user easily.
it says become a premium member...
compact 3.5
went to link (rapidshare) - did free user download - received message that the download was
unsuccessful. i am running a paid version of spb mobile shell, have the basic rom and radio that came with phone. is there anywhere else to find this? i had it before, but have had to get refurb phone...again..so not sure where to find it. thanks
ps also- i know am in wrong part,but really would like to know more about new rom and windows 6.5, how easy or should i say hard is it to
put it on here? though, i do understand that u guys have already did the hardest part.
I am traing to install NETCFv35-ALL-IN-ONE.cab and it keep having an error msg saying
"Instalation error. Stop all aplications and processes, maximize available disc space and execut the installation again. Support informations: 2."
I all so traied NETCFv35.wm.armv4i.cab and hapens the same.
I have instaled on the phone .net 2.0.7045.0 (ROM) do I need to uninstall this first?
And sorry about my english
My Phone is the touch HD

how to upgrade my frame work to 3.5?

hi to run most of the good apps you need frame work 3.5 i have down loaded it but i cant install it do i on my phone but if i click on it on the pc then it trys to install on the pc any help thanks alot
dareuk said:
hi to run most of the good apps you need frame work 3.5 i have down loaded it but i cant install it do i on my phone but if i click on it on the pc then it trys to install on the pc any help thanks alot
Click to expand...
Click to collapse
--are you sure that the base rom hasn't .net 3.5 already installed?
.net compact framework 3.5 is not standard installed on a TD2 aka Topaz.
Download it from MSDN Microsoft here: http://msdn.microsoft.com/en-us/netframework/default.aspx
dareuk said:
hi to run most of the good apps you need frame work 3.5 i have down loaded it but i cant install it do i on my phone but if i click on it on the pc then it trys to install on the pc any help thanks alot
Click to expand...
Click to collapse
You should have a Active Sync (Windows XP) connection with your device.
For Windows Vista and Windows 7 you must connect through Windows Mobile Device Center.
Active Sync 4.5 and Windows Mobile Device Center are free for download from Microsoft: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync-download.mspx
It looks like the framework is being installed on your PC but it will be installed on your phone.
You must have .net compact framework 3.5 from my link above.
ok downloaded every thing you have stated and installed accordingly but im still no further forward if you could add me to msn and help me out id really appreciate it buddy add me : [email protected] thanks alot guys
having the same problem. I connected Topaz to PC via active sync and waited to install net framework. Tried to open advanced config and said I needed net framework 3.5 at least. I think I know the problem, I JUST THINK :d
yea im no noob but this is really confusing me i cant update to 3.5 any one help me thanks
updating to .NET 3.5
dareuk said:
yea im no noob but this is really confusing me i cant update to 3.5 any one help me thanks
Click to expand...
Click to collapse
I`m confused too: my polaris says - .NET 3.5 is already at the ROM but I´ve got a punch of apps which cannot be installed on behalf of lecking "actual .NET-version"????
sucks a lot - could somebody give me a hand instead of HR?
thxs in advance
Download this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
and run it on your PC. The idea is that it'll then copy CF3.5 to your device the next time you connect via activesync. If it doesn't do that for some reason then goto C:\Program Files\Microsoft.NET\SDK\CompactFramework\v3.5\WindowsCE on your PC and copy the file NETCFv35.wm.armv4i.cab onto your D2. Then using the D2, find that file in File Explorer and click on it, to install it manually.
Tom Lenferink said:
.net compact framework 3.5 is not standard installed on a TD2 aka Topaz.
Download it from MSDN Microsoft here: http://msdn.microsoft.com/en-us/netframework/default.aspx
Click to expand...
Click to collapse
That link is for the desktop .NET 3.5, not the Compact Framework, which kinda explains why people were having no success with it!
I have isntalled on my PC compact version and same problem ...
see http://forum.xda-developers.com/showthread.php?t=347537. Download the cab file and put in on the sd-card, doubleclick on the file
NETCFv35.wm.armv4i.cab and install process begin. I hope it works for yoy
http://forum.xda-developers.com/showthread.php?t=529783
If you don't use Activesync, you may want to get just the cab file instead. Just google for NETCFv35.wm.armv4i.cab, then instal like any other app, to the main memory.
Also, whilst you're about it, google netcfcfg.cab. This app lets you set windows CF policy, so that all apps which need CF2.0 to run will automatically use your newly installed CF3.5, which is apparently better and more stable.
The file sizes should be 2644KB and 34KB respectively.
Click to expand...
Click to collapse
For what it's worth, the above mentioned netcfcfg.cab .NET config program is part of the CF 3.5 Power Toys, available from MS here: http://www.microsoft.com/downloads/...14-a27d-4148-bf01-86c2e0953eab&displaylang=en
HandySpanner said:
Download this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
and run it on your PC. The idea is that it'll then copy CF3.5 to your device the next time you connect via activesync. If it doesn't do that for some reason then goto C:\Program Files\Microsoft.NET\SDK\CompactFramework\v3.5\WindowsCE on your PC and copy the file NETCFv35.wm.armv4i.cab onto your D2. Then using the D2, find that file in File Explorer and click on it, to install it manually.
Click to expand...
Click to collapse
Thanks for info....it's working for me
HandySpanner said:
That link is for the desktop .NET 3.5, not the Compact Framework, which kinda explains why people were having no success with it!
Click to expand...
Click to collapse
Sorry, my bad, here it is: http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
okay, will try and give you info
Pete_S said:
http://forum.xda-developers.com/showthread.php?t=529783
Click to expand...
Click to collapse
I was never able to get the cab file to work. Every time I ran it on the phone, I got an error saying that the aplication was not installed. When I installed the full msi on my laptop with the TD2 attached it successfuly installed on the phone.
works great. copy NETCFv35.wm.armv4i.cab, install, soft reset and go for it
do you want to try this
http://bbs.592ppc.com/attachment.ph...e4gKy/xwc1N87qsQH22Bnc32Fwr2Hs75z4ra9fJ87poIE

question .net compact framework

Hi
I have an question, I downloaded on the site http://www.freewarepocketpc.net some applications but they didn't start on my Pro2 with WM6.5 he says me that there would be an error with .NET Compact Framework. but i made an update and it doesn't start yet. Waht could I do?
Thanks
try this
did you open the net framework file on your computer while your phone was plugged in/with an active syn connection? i dont think you can open it straight from your phone and use it on your phone,pretty sure it must be opened on your home computer
try explaining it again? i might be able to help,which program did u download and how did you install 3.5 net framework,via your computer or what?
I just downloaded : TicTacToe.CAB / BubbleSetup.CAB / PowerRadio.CAB / SinkMyShipsSetup.CAB / HTCLightSaberSetup.CAB
I made them on my phone and there opened them for installing , when the instalaition was finished the phone said it would be in order but wehn i tryed to start one of the programms it did start
ok
do you get an error message? what did it say if you did? explain to me how you installed netframe work 3.5 ,did you install it on your computer while your phone was plugged in,download net framework 3.5 ,search for the version you need.in the search box here in xda download it to your computer,plug in your tp2 to the computer make sure you have an active sync connection,then open the netframework file on your computer and it will install net framework on your phone,if you have done this do it again then redownload the games,put them on your phone,maybe install on device instead of storage card then try again,hopefully that works or maybe another program you have installed is in conflict with it,or maybe the rom you have isnt compatable
perhaps something you downloaded is in conflict or the games are not compatable with a touch screen
I'm trying to install the .net compact framework 3.5 on my tp2 but i always get the message "installation of Microsoft .NET CF 3.5.CAB was unsuccessful."
i have synced the tp2 with my laptop and i run the installation program on the laptop.

.NET Compact Framework

Hi.
I have the HD2 T8585. Now I have installed CHT and CHTEditor. The problem is that CHTEditor requires .NET CF v3.5.9198. I tried downloading .NET CF from Microsoft but I cant install it since I have a newer version. So I download the .NET CF from here and when I try to install it it says that I have the same version installed in the ROM(i have the stock ROM). I then downloaded the netcfcfg and set CTHEditor to run with .NET CF v3.5.9198 but it gives the same error.
The error is: .NET CF Initialization Error
"To run this application, you must first install one of the following versions of the .NET Compact Framework: v3.5.9198. Contact your application publisher for instuctions about obtaining the appropriate version of the .NET Compact Framework."
BTW, I now see that some other apps, such as Bing, wont run, they give the same error.
Ty in advance.
Edit: Since nobody has answered I'll try to make it simple.
The .NET CF 3.5 that came with the phone ROM wont work. And i cant reinstall it since its in the rom.
BUMP.
sry for double post but i srsly need this, and google wont help.
BUMP, three days, no answer.
do a hard reset, if that doesnt work reinstall the rom or try one of the chefs custom roms they are all very good.
unfortunately it sounds like you have tried all the options to avoid having to do this already.
at last
ty for the answer.
btw i have tried to install a custom rom but my phone has a strange error in active sync. when i copy a file, it gives me an error that the device has been disconnected but it copies the file, but this doesnt happen when i connect the hd2 as a usb stick. and because of this i cant install HSPL.
Edit. whew it worked like a charm.
PS. now i need to get all my contacts

Categories

Resources