Database Users

Electronic schematic diagram needing ! :(

Does anybody have the electronic schematic diagram ?
Or anybody know where to get it ?
Bought on eBay as with faulty usb connector !
Have changed mini usb connector and and phone does not charge even turns on ! The is not +5V on the battery pins !
Could somebody help me ? THX !
forget it it works !!!
the battery was totally discharged must connect it to external power adapter and made a little charging after then it started on !!!

Urgently needed

Hey guys.
Just looking for a damaged jasjam.
Needing a main board. Seem to have blown the charging circuit and sync circuit in the phone. Have tried new battery, charger, usb doesnt work etc.
So if anyone has a mainboard or complete phone i could buy please let me know. Dont mind if the screen is smashed or anything. Just need the mainboard to work.
Cheers
Matt

i have a spare phone. but its in perfect working order.
that said, make me a sensible offer...

HTC touch charge problem

when i connect my phone to the charger/ usb cable it does not charge or connect to the pc. woul dthis be a battery problem or a hardware malfunction? also my phone is flashed and i have no battery life left, so i am unable to reflash to the original rom and send it for a warranty.
anyone know how i could fix this?
PS: thankyou in advance

Hi,
i have the same problem. Suddently, my touch dont charge anymore. Connector is dusty but seems ok, the touch boot but low battery. Any idea ? Have you solved this problem ?
thanks

Here is a solution, to send for warrenty, get a new battery from ebay.
Flash to stock rom and 2.x HardSpl and IPL and send back to warrenty.
I did that for mine.
--
Talking about your port, You guys can try to look for parts online and DIY it.
Are you guys sure that it is not the cable / adapter causing problems?

Didy ou try to charge directly using a travel charger (not through PC) and also try another cable another usb port in the PC or another PC

Yeah, i've tryed to plug it directly to AC charger, but without result, and my touch isn't warranty anymore. I'll try to open it but i've to find first the right tool !

I think that it could be a loose or burnt connection in the motherboard or the hardware cables which links to the charging port.

Hermes slider problem

Hi to all ! I have Hermes with big problem. When I open the slide keyboard very carefully and slow there is not problem. If I slide it faster the device turns off ( the same way as the battery is removed ). The problem is not the battery ( I've put piece of card behind the battery and it fits pretty tight ).
Is it the flex cable or something ?
Thanks in advance !
Ivo

Shappy said:
Hi to all ! I have Hermes with big problem. When I open the slide keyboard very carefully and slow there is not problem. If I slide it faster the device turns off ( the same way as the battery is removed ). The problem is not the battery ( I've put piece of card behind the battery and it fits pretty tight ).
Is it the flex cable or something ?
Thanks in advance !
Ivo
Click to expand...
Click to collapse
It could be the main internal flex cable that runs between the two halves of the device. But it could be a very fine crack on one of the solder joints between the battery connector and the motherboard.
Not easy to pin this down without dismantling and re-seating all the connectors. However, if you are not used to this kind of dismantling, you might just stick to opening it slowly rather than dismantling.
Mike

Thank you Mike !
I'll resolder the battery connector, clean and reassemble the flex cable connectors. If problem not solved will try another flex
Thanks,
Ivailo

Battery BL-T7 flex cable broken. Fixable?

Hello,
I would like to know whether this problem (broken flex cable connector) is fixable or not? If yes, can you guide me.
Thanks.