Hi,
Recently I have noticed a problem with my XDA II. When an incoming call comes in the phone does nothing. No ring or incoming call message on the screen. If I call my phone from my land line it rings and rings and never even goes to voice mail! If I press the answer button while doing this, the XDA2 suddenly starts ringing for a second and then it goes to voice mail. The phone then reports I have missed a call. If I then press the answer button to make a call, the phone goes haywire and plays the "missed a call" sound 3 or 4 times and then flashes the led. If I clear the missed call report and press the answer button again it does the same thing again.
If I soft reset the phone it is ok again, but eventually this problem comes back again.
It has only recently started doing this. The first time I noticed the problem was when I was setting up a photo contact for the first time. I have since retored an old sprite backup from what I believe was before the problem started but I am still seeing the same issue. I tried disabling IA_Callerid process on boot and a few other processes (down to 16 processes) but this hasn't helped either.
The main apps I have running are :
SPB Pocket Plus
GPRS Monitor
Wizbar Advance
XCPUscalar
Resco Keyboard
PIEplus
Has anyone else seen this problem before or know what could be causing it? Its totally weird. O2 support didn't have a clue either. I really don't want to have to hard reset my phone and install everything again :?
Many thanks,
Richard.
Do uninstall Wisbar, and possibly try their latest beta' release.
My phone/display freezes on occasion whenever I've missed or ignored a call. Also freezes at times when I answer calls with the pickup key. Just recently, I couldn't open a missed call notification using the soft key. Please help!
I'm using a K-Jam flashed 8125.
I'm tired of soft resets!!
(sorry for double post...originally posted in wrong forum)
I ocasionaly have this (also on my old Himalaya) but always when the device volume is set to 'off'.
Still puzzles me
I have a Sprint PPC 6700. I installed SPB Pocket Plus to to the miniSD card and had the problems you describe. I uninstalled and reinstalled to the device and the problems stopped.
whenever i click the recieve calls on my universal, i'll click the answer button.. and realize that it takes a lil longer for it to actually connect the call..
anyone here have the same problem here? any solutions??
tend to find it depends on:
1. THe phone skin you are using
2. Ring tone specific to each user
3. Caller id picture displays
4. Large ring tones
5. Other apps running simultaneously
6. How long since your last rom update
I think you will find that everydody experiences a 1 second to 2 second maximum delay
I am havin d same prob
Disable the skin on the dailer, and use a windows default ringtone. And a lot of free memory is always a plus
how to disable the dialer skin?
I believe it can be done here:
HKEY_LOCAL_MACHINE/Security/Phone/Skin
Then look for the DWORD "enabled" set it to 0
I am not sure about this though!!! You have to check google (like I did, and found this: http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=5075&catid=36
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
ng said:
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
Click to expand...
Click to collapse
jup, mine sometimes starts vibrating and just doesn't stop.
Soft reset is the only way to get my phone working again
ng said:
I have the same when I get a call, but I can live with that. My problem lately has been that when I get an incoming call my entire device freezes. I can press whichever button I like, but nothing works except a soft reset and then I would have missed the call. Has anyone else had this too? I hope it doesn't happen too often or else I send it off for repair (I pay insurance for a reason).
Click to expand...
Click to collapse
I have the same problem. When the MDA is open, everything works fine. But when the lid is closed, the mda freezes after an incoming call and softreset is the only solution. Any ideas about that?
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
Hey, I've been lurking these forums for a while but I thought I'd come on to ask a question. I tried asking on sprintmogul.net but they didn't really help.
I've had my mogul for a few months but lately it's been developing a really annoying problem. I'm really not sure where it started exactly so I can't blame any apps in particular. When I receive a call the caller ID / ring and vibrate go off perfectly - the problem happens when I try to answer the call. Generally one of three things happens:
1 - The call connects instantly and just works - this happens pretty rarely, I remember the last time it happened the person calling was also on Sprint, if that makes any difference.
2 - The phone will just sort of hang there for about 10 seconds, caller ID popup still there, the ring stops though. Eventually the popup disappears and I get a missed call notification, as if I never clicked the answer button. This is what usually happens.
3 - The phone hangs like in situation 2, but the call eventually connects. This only happens if I press answer almost immediately after the phone starts to ring.
I'm on winMo 6.1 with the latest radio and am not running any major mods or hacks, just a few reg edits. I'll probably try a hard reset soon but ideas on things to try would be appreciated!
I am seeing this also, on both my own xv6800 and my wife's. It's VERY annoying.