I recently upgraded to the QTEK 2.7.x ROM - it seems that MemMaid 1.5 is not able to show me the running processes ( everything else seems to work just fine ). When I click on running process I get a blank listing.
Anyone else experiencing this or is something wrong on my side?
I had that on 1.8, It worked fine after a soft reset. My memmaid works ok on the 2.17. I think its just you (it will probly show tasks after a reset though.)
Later; Lew
Related
I have a 850 I-mate JAM, and I installed the newest ROM. It was fine for like 2 days, and then every couple of days it would automatically reboot itself, wiping everything (except for me SD card) clean, and starting back up again from the beginning where you align the screen. I thought it was the newest ROM, so I download the orginal one and reinstalled it. Well it happened again, with the original ROM and its really annoying. It didn't start doing this until I installed the 1.11 ROM, but I reinstalled the old ROM and it still did it. Does anyone know a fix for this, or has this happened to anyone. I've only owned this thing for like 2 1/2 months.
I have a JAM850, running the latest 1.11 ROM and haven't found any issues yet. I'm running the following Today-Screen plugins: SPB PocketPlus, JournalBar, Rhinostat, SBSH Pocket Breeze, Pocket Syswatch.
I've heard of some hard reset issues involving Wisbar Advanced.
Are you running any special Today Screen apps?
Just SPB Pocket Plus (the latest version). Maybe it was just a small glitch, I'll play with it a little while longer to see if it happens again.
Hi guys, wondered if anyone here can help me out,
My phone is now running the latest orange ROM update:
OPERATOR VERSION: 7.130.1.174
ROM VERSION: 1.30.90 WWE
ROM DATE: 02/24/06
RADIO VERSION: 1.03.00
PROTOCOL VERSION: 42.36.P8
ExtROM VERSION: 1.30.174 WWE
Ive now updated to the new software with PUSH email included. I thought this was going to solve a problem ive been having with my phone.
Ive tried looking on here and no one else seems to be getting the problem.
I have been an SPV over since the classic and I purchased an SPV M5000 around a week ago, it all works fine, except at around 3:30pm - 4:30pm every day, the phones backlight comes on. Apart from yesterday when it happened twice, at 4:30pm and at 10pm!
Everything seems normal until i try to look at some text messages and i cannot see them, they are blank. I cannot load anything else up either, eg programs,I then click on the OK at the top right.
I was curious so i tapped SETTINGS and then MEMORY and the following is displayed:
See attachment SCREEN SHOT 1
The slider wont work, and I cannot do anything, so i switch off the device using the normal power button method, no soft resetting or anything, and then put it on again and i get the following screen
See attachment SCREEN SHOT 2
Now i make sure that there is plenty of program memory free as you can see by the screen shot, there is over 20mb free, so i dont understand why this is happening?
After a soft reset the phones fine. I havent got any extra software loaded, i havent messed around with the ROM settings, the registry of anything, its just been upgraded to the latest orange ROM.
This problem also happened with the previous ROM version so its not because of the latest orange ROM.
Any ideas how to fix it guys? Any help would be really appreciated.
(Apologies for the image size, im at work at we have no decent image editing software installed.)
Many thanks.
Think i fixed the problem
Well i cant believe no one else had the same problem as me, think ive fixed it tho.
I installed the great program called GSPocketMagic and this closes down the programs instead of minimizing them.
This seems to of done the trick. The original problem only happens every now and then, usually when i forget to close the programs down, or i get a few texts followed by phone calls whilst leaving other programs running to.
Just thought id let you all know!
Loving the SPV M5000 now, even sold my O2 XDA Mini S now!
ok my problem is at least 3x a day my mda would shut off completely and the power button won't turn it back on. the screen just stays black until I soft reset it with the stylus or take out the battery. this happened more often since I installed the new Mr clean aku 2.3 rom. anyone have any idea why this happens or is anyone having this problem?
What 3rd party software do you have installed?
lets see. I have:
sbp plus
spb backup
sbp weather
sbp finance
mortplayer
omapclock ( running at 228)
memmaid
xnpocketview.
the thing is when I had these on the 2.17 rom it was all fine. it is just recently its happening. I really like the new rom for many different reasons. this is my only gripe. that and sometimes my keys stop working
anyone??
So did anyone manage to identify the source of the problem?
Is it a hardware issue (with some coax cable as stated in another thread/forum)? Or ROM issue (but not me, because I haven't touched the ROM yet, but still had the same random shutdown)? Or is it just an old battery issue (since it's more than 1/2 year old now).
Cheers
I would give hard reset a try. I had random reset because of this one app I installed on it.
Wich one app?
I would like to install Spb Pocket Plus on my TyTN but I heard from some users that they had experienced some major problems with TyTN. Anybody had experiences with Spb Pocket Plus on TyTN? Thanks.
Works great on my TyTN.
I have a Dopd 838 Pro and spbservices.exe does not automatically start when I reset. I need to start is manually. This is the SPB process that provideds addtional features such as Battery Level at the top of the screen and Close Button options. Once I execute this file everything works fine.
Anyhow have this problem and know how to correct it?
Thanks.
unfortunately had to uninstall from mine...
Unit was getting freeze all the time and i had to do to much soft resets (over 10 a day)
As soon as it was uninstalled - started working OK.
I would love to put it back.... but........
I have no problems with it all... it does warn you during the install to make sure to use Main Memory (and not a storage card). Could this be your issue?
I had to upgrade to 3.0 from 2.5, but it works fine!
Not sure if its a problem from SBP pocket plus but once I have had it installed on my hermes (orange spvm3100) and after a few days of use the today plugin flashes on and off (the entire pocket plus today plugin disappears and reapears) constantly.....then the phone function stops working, only way to resolve is through a master reset!
The pocket plus I installed I used the same cab file on my MDA vario and that works fine so Im guessing its either a pocket plus wm5 glitch or something with the phone.....not sure which though!
Once hard reset the phone works fine again with no problems. Do spb do a wm5 version of pocket plus?
cheers
gurry
forgot to add: I'm on v3.1.2 build 5372 installed to main memory.
I'm using Plus 3.1.2 and I have no problms mentioned above. Just small thing. When I execute some link using action button (i.e. rotate screen) hw direction keys stop working under Plus until I use touch screen. When I use touh scren for executing, everything works fine. However, I can live with it
I actually have it running on my SD card and it seems to be working fine. It is okay for 2 days now. However, I had a lot of problems with PocketBreeze and after uninstall that software everything is back to normal. My phone froze 5 times in one day of using PocketBreeze.
With my jasjam i have no problems' its wors smoothly
ori
Ver 3.1.2 works like a charm here too. No probs at all.
Cheers,
StonyA
Works find NOW
I had problems with all SPB softwares and after reinstalling them on the main memory and not on the micro-sd everything works great.
I am not sure if the problem come from spb Pocket+ (3.0) but after the installation my TyTN (french) worked fine ... until I soft reset.
Then the device refused to start and I was force to hard reset...
It happen twice and I don't feel a third test...
Imer
I've got 3.1.2 and spb diary 2.0.2 installed to main memory and they work very very well no slowdowns at all and I would highly recommend them
Jeremy
I had this running fine on Tytn for 3 weeks or so, but its running off the main memory.
Finaly I upgrade with the version 3.1.2 and all is working fine
I have a Dopd 838 Pro and spbservices.exe does not automatically start when I reset. I need to start is manually.
Click to expand...
Click to collapse
Problem solved. I did a hard reset, since I needed to clear out some other programs. Loaded Pocket Plus on my memory card and now everything works great. No problems at all on my Dodod 838 Pro.
I run v.3 on my TyTN and everything is OK. I recommend it.
Mauro
pumats said:
I run v.3 on my TyTN and everything is OK. I recommend it.
Mauro
Click to expand...
Click to collapse
is your tytn branded or unbranded?
I've just installed FRING....
Sometimes ago it worked correctly on my ELF....
But now, after I flashed a WM 6.1 rom, it doesn't work anymore....
I launch it and "Fring is LOADING" window appears, but the program doesn't boot up....
Any chance to fix this problem?
Cheers....
Whats about asking the fring developers/support?
Maybe someone here has the same problem.....
And a solution to fix it!
There are problems with compatibility of VOIP apps and WM6.1. Skype doesn't work too.
I ma also having the same problem
Hey guys,
Im new to the XDA developer site, recently i have upgraded my Imate Jas Jam from WM5(Telestra) to WM6(3 Network) using "HERM_DOPODASIA_WWE_3.54.707.3_6275_CustomRUU" I have downloaded fring from www.fring.com/cab
Installation is successful, but when i start Fring it simplay shows up the screen which says fring is loading then close application, tried too many times could'nt make this to work, any ideas...
your help is appreciated
Hey Guys,
I have just had the very same thing. I have installed FRING on a new Kaiser. It starts to load and then does nothing. I have left it for a while and as in your cases nothing happens.
I was able to soft reset the phone and then 'remove' the programme. so that I didn't need to rebuild the whole PDA - done that enough times today!
What I do know however is that FRING DOES work on Windows Mobile v6.1 ROMS as I have had it working correctly on another machine that I have rebuilt (Hermes)
I will continue to test.
Regards
MobileMerlin
wberesford said:
Hey Guys,
I have just had the very same thing. I have installed FRING on a new Kaiser. It starts to load and then does nothing. I have left it for a while and as in your cases nothing happens.
I was able to soft reset the phone and then 'remove' the programme. so that I didn't need to rebuild the whole PDA - done that enough times today!
What I do know however is that FRING DOES work on Windows Mobile v6.1 ROMS as I have had it working correctly on another machine that I have rebuilt (Hermes)
I will continue to test.
Regards
MobileMerlin
Click to expand...
Click to collapse
OK gents, not good news I am affraid - this isn't something that is FRINGs responsibility seemingly. It is seemingly more related to the ROMS that are being used. This would add up as it worked with my HERMES running a 6.1 ROM but not this KAISER equally running a 6.1.
I have contacted the FRING development team to see if there is anything that they can do however I am not holding my breath.
Kind regards
Warren
I've got the same problem
Fring is always loading and nothing more happen.
I've been experiencing the same problem... It loads up....the only thing I can see is the "Welcome logo" and nothing else...
I am using HTC Touch elfin
I think it's because of the cooked ROM I've been using on my phone - since didn't have any problems with Fring while was running on the original HTC Touch ROM.
I had the same issue and gave up on it, contacted Fring, was told that they are aware of the problem are looking in to it.
Solved in last version a few days ago. Download at www.fring.com
Its the same problem with the new version
bingo!!! fortunately it works for me..I am using the elfin with the specs in my siggie..fring works. downloaded the latest version. after first install, it was stuck..then did a soft reset and it started automatically.