Could someone please help change an Australian TELSTRA carrier ROM (I-Mate PDA2k EVDO) to a European one? The unfortunate part is it doesn't have a sim nor does it run on one, I think it's CDMA type. So the upgrade of the ROM has to be without SIM. Looking for Vodaphone in Spain. I would also like to know if its possible of deleting the carrier of telstra. Thanks.
Model Number : PH202A2 A 2
Language Code : WWE E
Operator Code : 54450002
ROM Version : 2.02.00 0 0
ExtROM Version : 2.02.114
Radio Version : HA01_138
Related
hi, amazing website i must say, but since im new to this site and lagging too in the info i would hence ask the question here to get the answer to my problems:
1) i have qtek 1010
ROM version 3.18.04 ENG
ROM date 05/22/03
Radio version: 3.25.01
protocol version 32S54
at the back: PW10A1
i have a middle east gsm roaming chip, which worked all over europe, but in canada it doesnt pick the local fido network. i believe my qtek is dual band not supporting the 1900mhz, how can i make it work for me ? could you please advise the steps ?
2nd question is:
my qtek is microsoft version 3.0.12039 (build 1178) does it need to be upgraded ? if yes with what software pls.
thank you in advance.
Guy
there is no way to make PW10A device to use 1900 ... but it should work for 900 if your network supports 900/1900
im trying to roam on fido , does fido use 900 ?
thanks
I have T-mobile wallaby PDA with these specifications Rom ver 3.14.40 ,radio ver 6.18, protocol 32 e4 ,Model PW10B1. I want to use in Pakistan on GSM 900 . When i put my sim card in the PDA there is NO SINAL . I use diffrent GSM operators sim card as well but the same problem i face . I try to search network manualy and automatic but no succes. Now i want your feedback I change the ROM or Radio Stack versions or upgrade what i can do to over come the problem .
Thanks
Hi All, I have just aquired a second hand XDA 2 with a USA Rom.
ROM Ver- 1.03.00 USA
ROM Date 09/24/03
Radio Ver 1.05.12
Protocol Ver 1337.12
I am based in the UK.
Please can anyone tell me what this means.
Is this the same as an English rom?
If not what are the differences?
I have unlocked the device and a T-mob phone card works ok.
Thanks in advance Grez
yes unlocked it should work just fine but likely the gprs and mms settings would be preset to the us operator
but you could change those
it's triband so it's 900/1800/1900 so like nokida or what ever it should work everywhere
USA Rom
Thanks for that Rudegar, that's more or less what I thought.
Hi
I have just bought this from EBAY UK.
I need help to unlock the mda vario and I have read the forums threads but too confused to what to use.
My T Mobile Mda Vario - Says on the Box Made in Taiwan ( HTC is taiwanese based)
This is what I get when I swicthed on my Phone.
IPL Ver : 2.21.0001
SPL Ver : 2.21.0001
GSM Ver: 2.19.11
OS : 2.24.2.6
It first installed the T Mobile S/w and now says SIM LOCK.
Could someone help me which unlock version ( latest is lokiwizMSL 0.3a) and some handfull advice.
If you need more info please let me know.
Thanks in Advance.
abzee
More info for the Mobile Version
Hi
I managed to get someones T Mobile Sim and then went to device Info and have the following info.
Model WIZA200
ROM : 2.21.2.6 WWE
ROM Date : 03/09/06
Radio Version : 02.19.11
Protocol Ver : 4.1.13.09
Ext ROM : 2.21.2.109
Regards
More Info..after reading few posts
Total Summary
IPL Ver : 2.21.0001
SPL Ver : 2.21.0001
Model WIZA200
ROM : 2.21.2.6 WWE
ROM Date : 03/09/06
Radio Version (GSM): 02.19.11
Protocol Ver : 4.1.13.09
Ext ROM : 2.21.2.109
OS : 2.24.2.6
Flash Chip type : M systems
--
With some reading I think my Vario is G4 --- Is that correct ....
Can I use lokiwizMSL 0.3a to unlock it...
Please help..
I managed to unlock my PDA now.
I have appeneded the main thread Lokiwiz03 with the difficulty i faced.
thanks a lot to this forum...
I beleive you can use lokiwiz .3. Follow the directions from the first post in that thread exactly. And run it with either its native sime(the one its originially supposed to take) or without a sim at all. lokiwiz will give you the unlock code. Put in your sim and enter the code.
Or...
You could always ask t-mobile for the unlock code...they gave me mine for free. it took about a week but they got it from the company and sent it along with instructions in an email.
lokiwiz .3 worked for me
like a charm
wm1 said:
You could always ask t-mobile for the unlock code...they gave me mine for free. it took about a week but they got it from the company and sent it along with instructions in an email.
Click to expand...
Click to collapse
Hy!
I boght my in Croatia. In witch adress you send Email?
Hi all ,
I’m in Canada and I would like to know if there’s any rom/ radio that will make my phone 3G so I would be able to use it for fido internet ( although my phone is unlooked and its originally from Europe ) below is some info :
OS version:
5.2.21869 ( 21869.5.0.82
Manila version:
2.5.19211619.0
ROM version:
1.48.405.2 ( 71294) WWE
thanks in advance
hi.if the bands don't match (you didn't say what bands fido uses, our what model phone you have, 8585?) then nothing you do to the rom will help.
they use (850/900/1800/1900) but for the phone i'm not 2 sure where to find that ,
someone-ca said:
Hi all ,
I’m in Canada and I would like to know if there’s any rom/ radio that will make my phone 3G so I would be able to use it for fido internet ( although my phone is unlooked and its originally from Europe ) below is some info :
OS version:
5.2.21869 ( 21869.5.0.82
Manila version:
2.5.19211619.0
ROM version:
1.48.405.2 ( 71294) WWE
thanks in advance
Click to expand...
Click to collapse
As stated by you the phone is an European version, the model must be T8585 then there’s nothing you can do to run on Fido 3G network. Fido supports UTMS 850Mhz and the T8585 supports only 900/2100 Mhz. Unless your is from Australian Telstra version (Model T9193) then it will work on Fido network. One quick way to find out if your is T9193 is looking at the back below the battery cover and there should be a logo something liked ‘NextG …’ imprinted.
ok thanks alot for the info