I have T-mobile wallaby PDA with these specifications Rom ver 3.14.40 ,radio ver 6.18, protocol 32 e4 ,Model PW10B1. I want to use in Pakistan on GSM 900 . When i put my sim card in the PDA there is NO SINAL . I use diffrent GSM operators sim card as well but the same problem i face . I try to search network manualy and automatic but no succes. Now i want your feedback I change the ROM or Radio Stack versions or upgrade what i can do to over come the problem .
Thanks
Related
I've got a big problem as my XDA failed to detect GSM900 home network in Malaysia after upgraded my XDA1 to
rom 4.01.16
date 02/04/04
radio version 6.25.02
Protocol version : 324e4
The line just keep searching and i have no idea how should i deal with it....
Please help.......
from malaysia
I think you might have used T-mobile (USA) GSM 900/1900 phone (PW10B1) radio stack (radio version 6.25.02 ) to upgrade your GSM 900/1800 version phone (PW10A1). If so, you won't get signal! you have a dead phone, only PocketPC!
Phone is not dead! try this..
I got same problem here, the solution is simple
try to get into bootloader of your XDA , (search on xda-developers how to do it) and change band to your using bootloader
after this DONT touch the band selection tool in phone settings
More help on priv if u need.
If your device is PW10A type (rear sticker), carefully try the RSU 3.25.01 from Carrier Devices then select the right band from the GSM menu in the boot loader.
My T.Mobile Show's Its Unlocked But It Dosen't Work. Help
Hi I Have A T.Mobile Xda With
Rom version: 3.17.13 ENG
Rom Date: 05/15/03
Raido Version: 6.18.00
Protocol version: 324e4
Its got a xda developers bootloader image,
I Think Its A Special Edition ROM,
But Its Not Taking A Hutch sim It Show's No Signal When I on The Phone,
But Its Working Fine With A Skycell Sim.
I Tried Unlocking It But It Show's The Phone Is Already Unlocked.
What Do I Do Please Help.
Thank's In Advance.
Don't know much about your gsm networks, but your device is for 900/1900 MHz networks.
Be sure, your Hutch network uses 900/1900 and not 900/1800....
You told us, that your skycell sim is working. That means, that your device is already unlocked.
Another possibility is that there is a problem with the sim card. There have been a few postings, that some users have problem with their sim card. They used a new one of their provider and they get it working....
HTH
Stefan
hi, amazing website i must say, but since im new to this site and lagging too in the info i would hence ask the question here to get the answer to my problems:
1) i have qtek 1010
ROM version 3.18.04 ENG
ROM date 05/22/03
Radio version: 3.25.01
protocol version 32S54
at the back: PW10A1
i have a middle east gsm roaming chip, which worked all over europe, but in canada it doesnt pick the local fido network. i believe my qtek is dual band not supporting the 1900mhz, how can i make it work for me ? could you please advise the steps ?
2nd question is:
my qtek is microsoft version 3.0.12039 (build 1178) does it need to be upgraded ? if yes with what software pls.
thank you in advance.
Guy
there is no way to make PW10A device to use 1900 ... but it should work for 900 if your network supports 900/1900
im trying to roam on fido , does fido use 900 ?
thanks
Hello ,
I have very bad signal reception and running Windows 2002 .
Looking to upgrade both Radio and Windows :
Hardware XDA -1 : PW10A2
ROM : 3.17.03 ENG
Radio : T302
Protocol : 32S54 .
I use GSM 900/1800 Band in Asia .
Help needed :
Since the original HW is from T mobile , but due to German language I somehow loaded O2 English .
1.CAN I GET T MOBILE English (900/1800) SW ??
2.How to change OS to T Mobile English ?.
3.Which level to upgrade > both Radio and OS .
I have SD card , kindly guide me process to Upgrade
Since your device is A type and you are using 900/1800, if you want to have an original s/w then the best for you is the complete upgrade kit from Carrier Devices (ROM 3.18 + RSU 3.25).
If you want to use WM2003 ROM, you can use RSU 3.25 and cook any WM2003 ROM from the kistchen (4.01.16 is very good) and use your SD to flash our device.
Again, it's not recommended to flash the RSU unless it's REALLY needed.
Hello
I recently bought a MDA from eBay.co.uk (item 6370487252), it was described as unlocked BUT I have not been able to pickup any Network (i have tried all 4). Can some one Please have a look at the Details below and let me know if there is any possible way of making this work on ANY Uk Network :?: (GSM 900 or 1800)... I have tried to change it in the phone settings and also Tried to select GSM 900 from the Bootloader Menu BUT to No Avail...
---------------------------------------------------
Details
----------------------------------------------------
Rom Version - 4.01.16 ENG
Rom Date : 02/04/04
Radio Version - 6.25.02
Protocol Ver : 324e4
----------------------------------------------------
Hardware : PW10B1
Platform : Pocket PC 2003
---------------------------------------------------
Please reply IF you can help at all.... Many Thanks in Advance :?
Not sure if i really could help you. But your model is PW10B1 so you can only use 900/1900 GSM networks. There is no possibility to get it working on 1800.
Maybe this causes your problems...
Stefan
just flash to RSU Version 4.21-900-1800 and in GSM boot menu select 900-1800
redsonnic said:
just flash to RSU Version 4.21-900-1800 and in GSM boot menu select 900-1800
Click to expand...
Click to collapse
That would be a bad idea.
The Radio Stack depends on the hardware version. Since he has a PW10B modell, the device is just designed for 900/1900 Networks....
Flashing the 4.21could set the device as a paperweight...
Stefan