Please Guide : Upgrade RSU and OS - MDA, XDA, 1010 Software Upgrading

Hello ,
I have very bad signal reception and running Windows 2002 .
Looking to upgrade both Radio and Windows :
Hardware XDA -1 : PW10A2
ROM : 3.17.03 ENG
Radio : T302
Protocol : 32S54 .
I use GSM 900/1800 Band in Asia .
Help needed :
Since the original HW is from T mobile , but due to German language I somehow loaded O2 English .
1.CAN I GET T MOBILE English (900/1800) SW ??
2.How to change OS to T Mobile English ?.
3.Which level to upgrade > both Radio and OS .
I have SD card , kindly guide me process to Upgrade

Since your device is A type and you are using 900/1800, if you want to have an original s/w then the best for you is the complete upgrade kit from Carrier Devices (ROM 3.18 + RSU 3.25).
If you want to use WM2003 ROM, you can use RSU 3.25 and cook any WM2003 ROM from the kistchen (4.01.16 is very good) and use your SD to flash our device.
Again, it's not recommended to flash the RSU unless it's REALLY needed.

Related

ROM update

Hi,
On the good O2 xda I have:
ROM ver. 3.12.07 ENG
ROM date: 08/13/02
Radio ver. 4.06
Protocol ver. 32S54
From About: 3.0.12039 (build 11178)
As I found on site (xda-developers/rom) this is probably ASIA rom.
If anyone has this versions rom (ce&gsm) and .nb files ? Where can I find also update for my O2 xda ?
Please help,
best regards
ROM Update
Try http://www.myxda.com
I cannot download rom from www.myxda.com page, because I enter the IMEI and I have an information about invalid IMEI.
Why don't you use an update from another O2-Site?
Maybe you can use the UK Update or Dutch, .....
I don't know if I would use bios from UK, because UK bios can be compatible only with 900/1900 ??? I dont't know. Can anyone tell me ?
I think I have 900/1800 gsm xda (I live in Europe).
My another O2 xda is broken after radio stack upgrade (hanged while installation process). I don't have serial cable (I would copy gsm to sd from good xda and restore it to broken xda).
I have SD card reader.
Is it possible to write gsm radio stack upgrade to SD card using .nb file and then run at O2 XDA ???
Is there any .nb file of radio stack gsm ?
Dear Xda-developers please help :wink:
As far as I know UK is still a european country...

How to downgrade a RSU?

I made a RSU upgrade to my xdaI and my phone aren't function at the moment...
it can't register to the network.
I live in portugal, and the original network is optimus.
How can i downgrade the rsu to is original state?
Tkx to all help
what's ur device type (A or B)?
what's ur operator band ?
what was the previous RSU version ?
Before all the changes my device is a:
Model - PW10A1
Rom Ver. - 3.17
Lang English
unfortunetly i dont know what is my RSU version I live in portugal and my operator is Otimus (if this can help!?!?!?!)
At the moment my device is:
Rom vers. - 4.01.16 ENG
Rom Date - 02/04/04
Radio version - 4.21.00
Protocol version - 32S54
The upgrade history is this:
I have a Qtek1010;
I install one version of T-Mobile Rom;
I upgraded with another version of t-mobile ruu and rsu.
After seeing that my cell phone didn't work i decided to install O2 rsu to see if it works... and it's unoperacional at the moment!
Any help?
Contact the dealer who sold you the Qtek and ask how you can get the latest officially supported version of OS and radio installed.

QTEK 1010 - upgrade help

A friend of mine has QTEK 1010 device (which I suppose is thie Wallaby). The current details is as follows,
Details given under System Details
ROM version 3.14.06 ENG
ROM DATE : 10/01/02
Radio version T313
Protocol Version 32554
Hardware ARM SA1110 Speed 206Mhz
RAM size 64Mb
Flash 32Mb.
I checked the WIKI page. Which ROM version can I download??
- QTEK English 3.16.13 ???? is the latest for QTEK. Should I use this
- T-Mobile English 4.01.16 ??? This has latest version #, can I use this??
please advice..
you can use all these
http://lumpistefan.dyndns.org/
You can use all ROMs listed in Wiki.
If you want to upgrade to WM2003 i would suggest to use the 4.01.12.
Otherwise you could use the 3.20.06 or 3.17.03
Stefan
I had given the 3.18 version the last one listed in the QTEK - ENGLISH version. Works like charm now...

Please Help For Upgrading i-mate JASJAR

Hi Guys .
I Want To Upgrade My Jasjar To Windows Mobile 6.0
My Device Info Is :
ROM Version : 1.3.82 WWE
ROM Date : 02/22/06
Radio Version : 1.09.00
Protocol Version : 42.42.P8
ExtROM : 1.30.171 WWE
Please Help Me How To Upgrade My Device (Please Step By Step)
So Thanks.
Hi TAEL
Search the forums for a copy of the ROM.
The last time I looked there were at least 3 separate builds available here
Pay attention to the good advice being given by the moderators here with regards to installiing this ROM
I'm not clear as to whether these Crossbow ROMS have been made available legally
Look here for instructions on how to do a ROM upgrade:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Thanks Mr.AcapulcoRolf
Friends That Upgraded To WM 6.0 , Do You Have Problem With It ?

Q] How To Upgrade from SPL 1.08 to 4.XX ?

Hello,
Guys i have a question, i was using Nokia for along time then i decided to change to HTC some of my friends gave me HTC P4350,( HERA100 ) or Herald. He told me that " This phone was locked on Mobinil Egypt Network And Some One Unlocked It " i don't know how he did it but the phone works great with any SIM Card, but there is a problem it's running Windows Mobile 5.0 ( And It Sucks ) i Would like to upgrade to Windows Mobile 6 or 6.1
i have searched through this forum but it didn't find what i'm looking for, every post says " Your SPL /IPL should be 4.XX or more "
The Problem Is MY SPL & IPL are : 1.08.001
GSM 02.71.90
OS : 1.8.0.0
And I don't know how to update SPL Or IPL to 4.XX
Please Help me and guide me ....
Extra informations :
ROM Version : 1.8.452.2 WWE
ROM Date : 11/3/2006
Radio Version : 02.71.90
Protocol Version : 4.1.13.31
ExtraROM Version : 1.8.452.102

Categories

Resources