Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
approx 4minutes or less
I was having a problem w/mda and bluetooth and sometimes without bluetooth, in that the entire network would just drop when the call gets close to 4 minutes.... I called tmo about it and they simply gave up and said maybe its the phone...so they sent me a replacement mda, used it today during one call and couldn't believe that the call lasted longer than an hour...
Mine is only with bluetooth. I guess a little more info is needed. If I hit the voice dial button on my car kit I get the voice command tone. I have also used bluetooth to play music over the car kit with the voice command controls(just for fun, horrible quality). It will disconnect while it's playing music no call involved. I have a feeling it's the bluetooth connection timing out but I'm not sure. It's frustrating.
so its not happening during phone calls???
see there might be a bluetooth timeout that tmo doesn't know about...I have to use bluetooth and it seems like every 4min or less it blanks out everything and sometimes I even have to re pair the two devices.... I would try making calls and using the bluetooth w/o car kit...mine did some of the samethings like streaming music thru bt headseat and it would blankout with that also even when not on a call..
Car Kit Not Staying Paired???
I guess I wasn't clear. It happens in both situations. I think i have to re-pair after as well. As far as I know it doesn't stay paired. When a call comes in I usually have to wait about 2 rings before it rings through the car kit. Also when I make a call by hitting the voice dial button on the car kit the blue light blinks for about 2 seconds then I get the voice command sound. I assume that the blinking is it re-pairing. I guess I need info on how to keep it paired.
Anyone? I have found that time dosen't seem to be a issue as it has done it a 1min 43 seconds and 2 mins 38 seconds.
GreggSymington said:
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
Click to expand...
Click to collapse
Try turning on the bluetooth first while your phone is off. Once the bluetooth is on, then turn on your cell phone. I tried many times in frustration why it is saying "phone is disconnected" looking for problems. Then it works now and even the phone book in my Nokia and Garmin GPS. Hope it helps you too.
Turn on bluetooth device first while the cell phone is off. Once bluetooth is on, then turn on the latter. Hope it works. Do it everytime you use bluetooth device in your car.
I am using a HTC Tytn with my Audi A6 bluetooth device of the MMI.
But I have severe problems.
When activating bluethooth the Audi MMI system starts to download the missed calls and telephone book entries.
After about 10 seconds the MMI disconnects with a error "phone unreachable". After another 5-10 seconds it reconnects and starts again.
This will go on for a while until the dowonloading suddenly completes.
When I make a phone call then, sometimes the BT connection vanishes too.
I posted my problems in a Audi forum. A guy there said that there are different BT protocols which will cause the problems.
Is this the reason? Is there a way to configure the protocol used by the TYTN?
Can anyone help me?
Cheers,
Grischa
Hi
I have written a mortscript which automatically switches the audio on my O2 Orbit (WM6) to my bluetooth car kit when it detects it, it then plays a sound to confirm that the sound has switched over - it also start TT if power is detected. When it looses the bluetooth connection sound is returned to the handset and a "disconnected" wav is played. Now this works fine as long as the device is awake but not when in standby. So I would like to find a way of waking the device up when it first gets a bluetooth connection and then again when it looses it. I have looked at adding something to the notification queue using memmaid but I can't see any bluetooth actions there.
Can anyone help me??
anyone?????????????
Using the Touch HD with a builtin bluetooth car kit. Everything works fine, the phone's contact list displays on the screen of the car. The pairing went fine. Call history works. Happy me. But occasionally i notice after making a call via the car (after hangup) the connection disappears and i check the phone. Bluetooth is switched off!!! How can this be? Are there any settings i have missed?
Any other users experience this?
same here with my bt handsfree
what if you connect it to powersupply ?
with power : working
without power : after some minutes off
sometimes I can not access the contactlist, stop the car, remove the key, start again and it works
There is something wrong with BT + car
I've had my HD a couple of days and use it with the built in BT in my Audi. The car displayed "telephone is not connected" and when I checked the phone, no BT icon. I've had problems in the past with other makes not working very well like this and was thinking it was going to be the same here... As I was getting annoyed a call came in, rang for about half a ring on the phone then it reconnected to the car and continued ringing there, answered the call just fine.
Since then it's done the same thing twice, I'd prefer it didn't but it hasn't actually caused a problem yet.
BT shuts off by itself.
I seem to be having the same problem in my Audi Q7. It does not make a difference weather to be connected to a power supply or not.
Im having the same issue here, in my A4 Cab with integrated UHV 0420
Strange thing is, it doesnt disconnect from my works Parrott kit.
It does turn off the Bluetooth on the phone, strange. It didnt happen for the first week though.
Any ideas?
Bloke
same here. having problems with my Land Rover LR2. first week, there were no problems. now, the phone doesn't automatically connect when i start the car, i have t manually connect it by pressing the phone button on my dashboard. it then connects with no problem. however, when i try to place a call, it automatically disconnects the bluetooth.
not sure if this is a problem with the htc or my car; i have to try another phone with the car first.
Same happens in my Lamboughini and also my Mercedes- Benz E Class.
Looks like I'll just have to stick with my roller from now on!!!!
I see I'm not the only one with this problem. Soooo...... anyone got a fix?
Please, at least have you checked for a few seconds after the disconnect to see what happened ??
Well, I have a BMW S1 with in-car bluetooth. I previously owned an S200, SE K800i and a Touch Pro and never got any problems with those phones.
With HD Touch I also have the same problems like you people, but 2 or 3 seconds later the BMW regain the connection with my HD.
So, for me this is no big deal. If this only happens to me, then I'm the first to apologize my introduction on this post, if not... lol
Im sure its not related, but I installed the hotfix for the TF3d earlier and I didnt have any disconnects on the way home....... ????? Go HTC.....
Bloke
yesterday i installed the hotfix from htc, but today i lost bluetooth connection again in the car. The bluetooth in the car keeps functioning, but the bluetooth on the HD has deactivated itself! With my previous sony ericsson phone (also bluetoot 2.0) i didn't have this problem. So i think it's related to the bluetoothsoftware on the HD.
bloke said:
Im sure its not related, but I installed the hotfix for the TF3d earlier and I didnt have any disconnects on the way home....... ????? Go HTC.....
Bloke
Click to expand...
Click to collapse
I spoke too soon, it disconnected this morning and didnt reconnect....
Bloke
Have a look at this thread - also bluetooth problems with pairing issues - looks like BT maybe bugged
http://forum.xda-developers.com/showthread.php?t=442987&highlight=bluetooth+problems
Hello,
I have the same problem. I can not really use bluetooth in my car, because the Touch HD ends the connection after a few minutes (most times after less than five minutes).
Without a connection to the car, bluetooth will not be ended by the Touch HD, so it seems to be a problem of a connection to a bluetooth headset or a problem of a connection only to a car bluetooth "headset".
Regards
Thomas
Does this only apply to original built-in bluetooth kits and not after-market kits?
My BT-radio does not have problems with the Touch HD, but it is an after-market radio.
Same problem here. My connections drops also. I drive an Opel Zafira with builtin bluetooth carkit. Bluetooth is turned off after a while.
I've noticed when i start the car a connection is made and a few seconds later bluetooth is turned off and immediatly turned on again. After it's turned on, the connection is stable for a while. A few moments later it turns off again. Then i have turn the bluetooth connection manually.
Today i had a phone confercation for a half hour. The connection stayed stable. When i hang up the phone, the connection dropped .
Can the synchronisation of the phonebook be the problem? I had this problem with my p3600. After installing Jetware, the problem was solved. I've installed Jetware on my HD, but with no luck .
Is there a way to log the bluetooth communication. May be it tell us more
Indeed the HD bluetooth seems to be poor, I also experienced bluetooth switching off by it self when trying to pair with my Motorola S9 headphones, I have the hotfix installed, before I didn't notice this bluetooth behavior.
Also when exiting Opera the phone hangs, not always but sometimes
Anyone solved the problem yet
I send a email to HTC support. Hopefully they can help. If they answer......word goes arround that htc support sucks
still don't have a solution.........
Hi,
i have phonealarm. Phonealarm can turn on bluetooth on incoming call. this save battery.
my td2 take about 30 seconds to connect to my seecode car handsfree.
my old touch cruise connected in 5-10 seconds.
30 seconds is to slow for the incoming call.
is there any way to speed up the bluetooth connect?
regards
lars
is there any way to speed up the bluetooth connect?
Click to expand...
Click to collapse
Can't answer that, but can report that leaving Bluetooth enabled all the time doesn't have a serious impact on battery life. I use Bluetooth for music, and when I turn on my Sony HBH DS-200 it connects immediately even with the TD2 in standby. Try it, nothing to lose.