Database Users

Finally MMS is working 4 Qtek for UAE & maybe other cont

i finally got it working on my qtek & enjoying the mms service from any phone to any phone :lol: anybody intrested in the way?

Hi,
i am interested, please share your exprince.
thanks
Kami

Great !! Plz let us know.....
Are you using the 1010 (QTEK) or the 2020 (Imate) ?
Also what is your ver of ROM & Radio ?
L8R
-d

PLEASE let us know this precious information as to how to get MMS working in the Qtek 1010

here is the way
first to answer your questions am using Qtek 1010 & MW2003 & Radio 3.25 (don't know if it makes a differance) please let me know
what you need to do, i have 3 file that is zipped into 1 file attached below,
1. Unfortunatly you have to delete all you connection setting, every thing, the ones under work, the ones under home (all), but don't worry because these files contains all of them gprs, mms, internet
2. install the files in the same sequence they are in from 1 to 3
3. now soft reset your phone. (might take up to 5 minutes to go into windows the first time)
4. put the setting exactly like the attached picture 2
5. Click on the servers TAB & click on etisalat & fill as exactly as shown in pic 3
6. compose a new MMS & send it to someone who does have MMS & there you go, ask him to send it back to you, & its working & doesn't need any activation or anything but you might notice that the signal line is still working after recieving the MMS picture, don't worry its not charging you & you can still recieve calls but if it bugs you keep holding the (close)(red) buuton on the phone to stop it, please send me your results am intrested in the outcome
Regards
Rabia

Rabia said:
1. Unfortunatly you have to delete all you connection setting, every thing, the ones under work, the ones under home (all), but don't worry because these files contains all of them gprs, mms, internet
Click to expand...
Click to collapse
Hi mate, I 'm so interested to try this s/w, but have few questions:
1. Does it work for other countries providing you know the right setup ?
2. I 'm using EZWAP 2.5 for MMS, how do you compare the 2 products ?
3. Regarding the above quote, do you mean it's predefined to work for only Etesilat network ?
Thx in advance

Biso007 said:
Hi mate, I 'm so interested to try this s/w, but have few questions:
1. Does it work for other countries providing you know the right setup ?
2. I 'm using EZWAP 2.5 for MMS, how do you compare the 2 products ?
3. Regarding the above quote, do you mean it's predefined to work for only Etesilat network ?
Thx in advance
Click to expand...
Click to collapse
1. first yes it would work for any other country if you have the right setup, i also happen to have the setting for egypt both operators anyways
2. i used this stupid program but its over compplicated since you have to fill millions of setting everywhere & all what we need is to send & recieve mms easly, no doubt if you are using ezwap & its working fine just keep it its good for advanced setting but to keep it nice & short this software is much easier than ezwap
3. for the 3rd question files #2 containes Etisalat setting so for egypt i have to give you a differant File#2 which is attached for both operators (ofcourse its the exact setting they use no invention was made from my side) & the rest would be the same, ofcourse except whats in the 2nd picture as the http page & the IP also happens to be Etisalat
Regards
Rabia

Thx a million ... I 'll give it a try so soon and I 'll give my feed back so other people here may comment as well.

very good, is anybody intreseted from other countries i have kuwait, bahrain, jordan & KSA but all needs to be tested so any volenters?

Hi again,
I gave it a try ... it works like a charm!!! ... much better than EZWAP!
I just tested it with 2 MMS and its performance is pretty good. One comment on the settings .cab for Egypt, the mobile dialing pattern is some how corrupted ... it's full of quotes and 9s ... I just had to over write it myself ... other than this it's very good.
The Album application seems took the handling of all multimedia files ... I don't mind as it looks very good as well ... it's the first s/w on my device to play midi files that good!!!.
I will continue trying and keep you updated.
Thx a lot mate :lol: :lol:

perfect Biso007 i like what am hearing, as i thought some glitches in Egypt but hay i never been there :lol: so its good it ran with little problems, i would like other people from other countries to check it
PS anybody whos trying it, you would find a camera SW in your programes don't mind it but DON'T remover it since it makes the album works which is required for the SW to be working, if it bugs you just remove the icon manualy like i did
R
R

Hi again,
Yes, I was about to remove the camera.exe from \windows but thought it might affect the application ... it takes 0.5 MB :?
One more comment, but I don't know if it's only my device ... if you have your ActiveSync connected to a remote Exchange server (Outlook database) through GPRS ... it will no longer connect ... the MMS s/w messed up the whole connectivity settings ... it takes the one to know exactly how to set everything back manually ... it's a pain but finally worked tho 8)
This s/w is prefectly simple and powerful in the same time ... will keep trying more features.

keep it up man, i wish we have more people of your kind, we would had all our problems solved :roll:

another comment, but not sure it's the s/w or the MMS server ... i sent a simple MMS message to my wife's phone (Nokia 7260) ... instead of receiving MMS notification , normal SMS was received with instructions for how to access the message from the web as if it was sent to e-mail or non-MMS phone.
i think it's the s/w coz when i use EZWAP a normal MMS notification is received. However, i'll try it with different handsets. my previous tests were to my own phone so i know it's working fine for PPCs.
note: i renamed the camera.exe file and seems have no impact on album s/w ... maybe coz my xda doesn't have a camera ?
the today plug-in and the sending/receiving icon on the windows bar are very nice features.
any other notices ?

Re: here is the way
[quote="
2. install the files in the same sequence they are in from 1 to 3
[/quote]
Sorry but how do u install a cab file? Or should I unzipp them into a folder on my phone?
//Lasse

never mind that post. Figured it out
//Lasse

Sweden Telisonera
Hi
Anybody got this to work with teliasonera.
I got it to work that it connects to the GPRS server, but the mms messege never gets sent. Is there a error log for the mms composer anywhere?
I don't get any errors at all, it just wont send it. I can't recieve either
//Lasse

you need the setting of your country to be replaced with these setting, they are country spesific, try to obtain the setting & i will help you getting it installed
as for mr Biso it was nice of you, very systimatic test, thanks alot but my contributions seems that will end to here, i got a 1% death message for a radio upgrade & couldn't get over it, i tried everything in this forum but seems not to be lucky so far

Rabia said:
you need the setting of your country to be replaced with these setting, they are country spesific, try to obtain the setting & i will help you getting it installed
as for mr Biso it was nice of you, very systimatic test, thanks alot but my contributions seems that will end to here, i got a 1% death message for a radio upgrade & couldn't get over it, i tried everything in this forum but seems not to be lucky so far
Click to expand...
Click to collapse
I got the settings.
the settings for Teliasonera are:
GPRS server: mms.telia.se id:mms passw:telia
gateway: 193.209.134.132
Server Address: http://mmss
Still. The mms does not go out of the outbox....
//Lasse

Rabia said:
i got a 1% death message for a radio upgrade & couldn't get over it, i tried everything in this forum but seems not to be lucky so far
Click to expand...
Click to collapse
I know it's a nightmare ... I 'm sorry to hear that . Anyway, check this thread and hope it will help http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=1+rsu
Good luck

New user to the M1000

I've just recently upgraded from the E200 to the SPV M1000. I'm fairly new to all the functions as I just used the E200 just as a phone.
Am I doing something wrong as I can't seem to recieve MMS any more, or set seperate ring tones to particular contacts.
Also I've noticed there is a ROM updade to 1.72, what benifits would this give me, and where can I get hold of it...
Thanks, in advance

seperate ringtones require a 3th party program
mms require that it's setup in mms composer and under connections

I am in the same position, I have just upgraded to an M1000 to find no MMS, the problem it seems is not setting up the MMS connection, it is that there is no version of MMS Composer installed on the phone. Does anybody know where I can get this software? I understand EzWAP might solve the problem but it has mixed reviews and some people say MMS doesn't work on the M1000 with it.
I think the software that is used by other networks is made by Arcsoft, but I can't find anywhere to download the software from,
Cheers in advance of any help

I'm surpised to hear Orange don't supply an MMS Composer? I use an XDAII on Orange and the MMS Compose O2 supplied works fine when configured for Orange. You can happily use the MMS Composer .cab file found here. Just copy to the m1000 and double click to install.
If you feel up to it you can unhide and unprotect the extended ROM, copy the cab file there and edit the config.txt file, then re-protect the extended ROM. That way if you hard reset, the MMS Composer .cab will automatically be re-installed. More details on doing this (it's relatively straightforward) can be found here.

Thanks for the link, it has installed fine on my phone. Do you know where to get the Orange settings for MMS? I was told I need to set up a new connection then configure the Composer, but I rang Orange and the best they could do was send a SIM update which did nothing at all!!
Cheers,
Fin

Yes, forgot that part! See here, the guide is for XDAII users but if you read through it you'll find the relevant sections for configuring MMS which apply to the Orange network regardless of whether you use an m1000, XDAII etc.

Dont know if yo will see this message seeing as it was last week but on the orange website there is now a rom upgrade which gives you a mms composer i have just downloaded it and it works fine....takes a while to upgrade though :lol: :lol:

Thanks, I meant to put something on this thread about the new ROM update, downloaded it the other day and it is great! Orange are bizarre though, I emailed them about a new ROM only a few days before and got a reply saying that MMS was not going to be supported at all on the M1000, so I was a bit shocked to see the update only two days after!

New Rom update
Thanks, I spoke with Orange yesterday about the MMS and they told me there is a new ROM update. I've downloaded it and applied. However when I restored all the data via xBackup the menu and application had gone. I tried this twice from the hard reset and the same applied, so I just rebuilt it manually.

HERE IT IS. Cingular WAP CAB Setup

Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
EDIT: Uploaded wrong CAB. New one is good.
EDIT: Added CAB with Both WAP and MMS.
EDIT: Fixed w/MMS CAB to add the Cingular Settings as the default.
EDIT: Replaced with Fixed CAB for Exchange AS and the user/pass stick now. Also added OPEN DNS servers for quicker "locating"
EDIT: Added No ICON Change CAB as requested.

wpbear said:
Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
Click to expand...
Click to collapse
Wow, thanks wpbear, that will come in handy when I finally do decide to upgrade to WM6

Does this include the MMS settings?

Installation of Cingular WAP Settings.cab was unsuccessful

rkorzuch said:
Does this include the MMS settings?
Click to expand...
Click to collapse
No maybe I will look into adding that.

slimsaturn said:
Installation of Cingular WAP Settings.cab was unsuccessful
Click to expand...
Click to collapse
Do you already have the Cingular settigns there and ran this over it, maybe the Reg Keys cant be written if you already have a Cingular setup or if you are just online at the time. I tested it by deleting my connetions and, since My ISP cant be deleted totally, I blanked all the info from it. Then ran the CAB and SR then I had my settings correct.
Also it is tested on Hermes only and the reg keys came from WM6. I can not test on WM5 right now.

I only set up the wap settings. I deleted that first then tried to run it.

slimsaturn said:
I only set up the wap settings. I deleted that first then tried to run it.
Click to expand...
Click to collapse
I had just did a cleared storage so my phone was plain no settings ad I was unsuccessful also.n

I just re-uploaded a newer one, maybe I uploaded the wrong one or it was a bad transfer on my end. The new one is in the first post.
Check 1st post again for MMS.

That should do it the old one was 4kb

Cool. I am one of the quilty ones that did not know how to set it up so I definately appreciate it. I ended up figuring this out around 2am this morning.
But the downloads still seem a little slow. Im using 1.27 radio and XDA 0.20.1.

I noticed the MMS CAB didn't put the Cingular Setting as the "Default" in the new LVSW version so I fixed the second CAB.
Also I noticed that sometimes all the connection/modem settings are correct except the User name and Password sometimes do not stick. All the other info stays.
If it doesn't stick after the soft reset:
User Name: [email protected]
Pass: CINGULAR1
THESE ARE CASE SENSITIVE! Even adding this little bit is better than creating the entire connection every HR. I am looking at the CAB to see if I can make it better. Probably have to write an XML file to do, I hate those so...

Cannot install either
slimsaturn said:
Installation of Cingular WAP Settings.cab was unsuccessful
Click to expand...
Click to collapse
This is exactly what I need but I'm getting the same error. Tried running the Cab from main memory and from my storage card. Using LVSW on a TYTN - no settings currently exist so there's nothing to overwrite. Please help.
Edited: installing directly from this thread (rather then downloading and moving to my device seems to work)

jvence said:
This is exactly what I need but I'm getting the same error. Tried running the Cab from main memory and from my storage card. Using LVSW on a TYTN - no settings currently exist so there's nothing to overwrite. Please help.
Edited: installing directly from this thread (rather then downloading and moving to my device seems to work)
Click to expand...
Click to collapse
I think these problems are from bad downloads. The ftp has caused this on other downloads for me latelty. A redownload fixed it on other cab I have tried. I had the problem on 8525software.com before too.

COnfused
wpbear said:
Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
EDIT: Uploaded wrong CAB. New one is good.
EDIT: Added CAB with Both WAP and MMS.
EDIT: Fixed w/MMS CAB to add the Cingular Settings as the default.
Click to expand...
Click to collapse
Tried your fix with wm6 on 8525 that you have and still get message current connection cannot be used. Any suggestions.

Trouble With Exchange ActiveSync
WpBear, I really appreciate you setting up these CABs. But I have to report a problem I encountered which caused me some major stress on Friday until I figured it out.
Basically after applying your settings CAB after flashing a new ROM, the first thing I want to do is set up Exchange ActiveSync with my work email so I can get over-the-air synch.
I had previously flashed Kyphur's WM6 ROM, entered my data settings manually, set up my Exchange synch manually, and all was working well for several days.
I ended up flashing Kyphur's ROM again and decided to take advantage of your Cingular Settings CAB to save a little time. Of course, foolishly I did not check out my Exchange synch assuming it would work. I went ahead and installed all my other apps and got the phone back into shape. Next morning (Friday) I noticed I did not have any work emails waiting on the phone - strange.
I then tested the Exchange synch and found it did not work. I was getting an ActiveSync error on the phone about needing a cellular connection to perform the synch (which took me several hours to find).
Bottom line is, no matter what I did with the MEdia Net or My ISP connections , I could not get rid of the ActiveSync error. The only thing I can do is reflash the ROM and enter data settings manually. I have already done this and confirmed it works - I can now synch over-the-air with Exchange again.
Anyway, I just wanted to put this message out there in case anyone else encounters this problem. Hopefully it will save them from the stress and panic I encountered for a while until I figured it out.

wap settings and activesync
I have the same problem. if I install the cingular cabs my active sync gives errors. have to use HTweakC with LVSW to keep data connection always on after manually setting carrier wap settings. but th problem is now my Cingular MediaNET MMS doesn't connect.

Same here, I have tried manual setup and the attached CAB files, both fail to give connection to Cingular MEdiaNet MMS when using LVSW.

kevntrace said:
The only thing I can do is reflash the ROM and enter data settings manually.
Click to expand...
Click to collapse
I do hope you meant to say you were doing a hard reset (versus literally reflashing the ROM) each time you had to start fresh...?

If you are not using exchange server AS then check if you are username and password are entered. Thia was a mentioned problem I listed a few posts back. As far as AS exchange I do not use this since the agency I work for does not allow personal devices sync with theirs. I use POP3 and tested it this way.

Cingular's 8525 Unlocked / Using T-Mobile's MMS. Problem!!!

HI,
I got a 8525 from Cingular and got it unlocked using the instructions on this forum ( SWEET ). Now, I really wanted to Flash it and get rid of the Cingular stuff! But is not something that I'm ready to do ( after reading the wiki on HERMES and all I don;t feel comfortable enough to do it yet :-( ). Anyway I decided to configure my Cingular 8525 to work with T-Mobile, I have everything working emails, exchange server and pocket IE also added a few apps like opera and a couple of IM clients and everything is working!! But I can for the life of me configure the MMS on it!!! I added the new MMS server and I does not work I know the setting are right because it connects to the internet when is triying to send the MMS but it never sends it!!!
Does anybody knows why or how to fix it.
Thanks

What MMS Settings did you use?

slimsaturn said:
What MMS Settings did you use?
Click to expand...
Click to collapse
216.155.165.050
wap.voicestream.com
http://216.155.174.84/servlets/mms
first of let me say thanks!!!!
I had and old SX-66 locked to ATT, I unlock it and used it with cingular and later with t-mobile, I did all the settings the same way I just did the 8525, and I can see the phone connecting to the network then after a few seconds it connects to the network but the message stays in the outbox and does not go anywhere!! Thanks For your help

T Mobile uk MMS server lost

My hermes has stopped sending/recieveing mms messages since i got back from the UAE.
Ive tried to input the settings from the website but strangly the server isnt being listed in the servers tab (tools, options, mms, servers) but the set as default key does change from grayed out once ive added the details.
Anyone got any idea whats happening here and how i might fix it?
Cheers
(BTW im running WM5)

I have a tmobile cab file which will enter ALL the tmobile settings for you.
I use it for after a HR on roms which arn't tmobile specific.
the only thing that it does a little wierd is it tries to set the MMS outgoing service to use the WAP connection rather than the GPRS connection.
this is an easy thing to put back right thought.
I can send it to you if you think it might resolve your problems.
regards
Tony.

PM me if you can't find it.

Thanks for the offer but i took the opportunity to upgrade to WM6 with the offical tmob rom.
Cheers any way