Related
Does someone know if navigon 4 works great on the magician ?
Can we receive some feedback from users that have tried it ?
Thanks.
I have used it and it works fine although personally I prefer TomTom
yaaah
I have the same problem with Navigon 4.2 when I connect it to a bluetooth GPS,
I'm tryed with so many options but not yet, nothing at all, IT DOSN'T WORK WITH THE BLOODY BLUETOOTH GPS, unless I find I a way out to change the bluetooth setting there,
I hope anybody can advise...
regards
Navigon works fine with my BT GPS. No problem at all.
TO jacoh.
Did you mean it is working with the imate jam (magician)?
if yes,
did you pair the bluetooth gps with com5 (as outbound)?
then normal setting of navigon,
then work fine (it is not finding the bt gps at all) where other small navigation software finds it and work with but not the navigon,
ANY SPECIAL STEP YOU DID TO LET IT WORK OR WHAT?
please advise!
thanx in advance
maybe you should call the Navigon software vendor and ask why it does not work.
unless you did not bought the software of course, but you certainly are not a f**king hacker are you?
Yes. It is working with iMate Jam (well it's a Qtek S100 with french OS). Com5 in Navigon settings. GPS is an emtac. No problem. Most of the time, problems come from BT pairing. Does your GPS receiver comes with a test application (emtac provides one for example)?
to mms72 :
i've read that the 4.2 doesn't work. Only the 4.01 does.
to jacoch :
Is it slooow or not ?
for example, when you don't follow the route, how long does it take to recalculate a new one (big delay or not) ?
thanks.
I've heard poeple in France saying it's quite slow to recalculate and almost unusable in cities. I have no problem on my side. It takes 1-2s to recalculate. But it seems to depend on the map density. I live in switzerland in a small city and the maps are probably simpler than the map of Paris or London.
Hi all,
I spend a lot of time to get MN4.2 working reliable. It depends on the protocol that your GPS is working with. As default for my RBT1000 was
GGA=1, GSA=1, GSV=5 RMC=1,GLL=0 and VTG=0. With this configuration the bluetooth connection will lost from time to time.
Now i have changed the protocol to GGA=1 and VTG=1. This combination works perfect for me. In some case (depends on your hardware) you need
GSA=1 also,
\\Yoshi
thank you yoshi:
simple and small question:
How to change those protocls :roll: in my imate jam..
Hi,
It depends on your mouse how to change the protocolls.
In my case the mouse came with a special software to change the protokoll. You can also some special tools for that for example:
winfast navigator.
\\Yoshi
thank you for the advice Yoshi
thank you Yoshi,
it (MN4.2) finaly worked with Holux GR-230 Bluetooth GPS after I changed some protocls (((( BuT )))) not stable , it works like 2 sec's on and 4 sec's off in finding the GPS Signal and I'm still trying to play with protocls to find the best combinations...
:evil: :evil: :evil: still fighting with it... :evil: :evil: :evil:
regards,
MN4.2 working great on my MDA compact with Fortuna Bluetooth GPS.
Mapfile > 330 MB! on 1 GB SD-Card.
Waiting for my 2GB Card to put the whole European map file on it.
Excellent product!
Just purchased MN4.2 with Navigon's GPS receiver. Their own receiver is great because it has TMC reception for traffic updates.
The software runs really well, routes are very fast calculated, no problems at all.
I think this software is really nice, all completely usable without stylus using the d-pad, it might look less appealing than TomTom, but it is way more sophisticated, and the maps are much better quality.
On their website they offer a very attractive upgrade price from any competitive product.
Only issue I noticed so far is that when I miss a turn it is sometimes very fast in giving me another route, and sometimes it is slower, don't know why, but always acceptable.
The only problem is with voice guidance, as it sometimes speaks too late. Particularly when there are turnings one after the other (very close, say 20m), then the voice guidance is a bit slow. It is ok if I am driving slowly, otherwise it speaks too late.
Having a glimpse at the map display clarifies any doubt, so no big issue.
The software is also extremely stable, you can open and close hundreds times without any problem. In my case, everything is installed on SD Card.
For the bluetooth, I first paired using the OS bluetooth config screen, and then I opened MN4, and gave COM5 as the bluetooth port. If it doesn't work, you should restart the program after switching off and on the receiver.
By the way, I live in London.
When I will have more experience with the product, I'll post further impressions.
Hi
just buoght the auto express and I find that CoPolit has just realesed the new navigator.
It suppose WM5 and the map work in Landscape mode as well.
Check it out
http://www.alk.eu.com
Tom Tom better watch it now. The CoPolit does everything that the Tom Tom and extra as well.
Ciao
Gigi
gigino said:
Hi
just buoght the auto express and I find that CoPolit has just realesed the new navigator.
It suppose WM5 and the map work in Landscape mode as well.
Check it out
http://www.alk.eu.com
Tom Tom better watch it now. The CoPolit does everything that the Tom Tom and extra as well.
Ciao
Gigi
Click to expand...
Click to collapse
Navigon Mobile Navigator 5.0 and 5.1 both works like charm on JasJar and for me it is much better than TomTom already. No problematic installations, works from SD straight ahead, maps are not splitted (the whole Europe is one file), you do not need to switch crossing the borders.
The maps source is better (maps are more accurate than TomTom ones).
I, definitely, recommend it.
Regards,
screen turns out after 3 minutes or so if use navigon for na
yo baudy 2
i have it to.........but the problem is if i use it (navigon 5)
Then after a couple minutes mine MDA PRO goes out and i am unable to connect again.......i mean the screen just gets blank.
Is there something in the settings i have to change?
Before in my Qtek 9090 i used tom tom and navigon and the screen remains on while navigating / driving.......
please help
Re: screen turns out after 3 minutes or so if use navigon fo
surinamer123 said:
yo baudy 2
i have it to.........but the problem is if i use it (navigon 5)
Then after a couple minutes mine MDA PRO goes out and i am unable to connect again.......i mean the screen just gets blank.
Is there something in the settings i have to change?
Before in my Qtek 9090 i used tom tom and navigon and the screen remains on while navigating / driving.......
please help
Click to expand...
Click to collapse
Hi surinamer,
I do not think there are is anything special in Navigon config (i use BT GPS receiver).
I've installed Navigon completely and huge European map (~950Mb) to SD. I beleive you need to look at your general WM power and backlit
settings.
Forgot to mention - Navigon eats a lot of RAM - ~20-25Mb. So, free RAM as much as you can.
Regards,
baudy.
Hi Baudy2,
after reading your post I've installed on my xda exec Navigon 5, everything is ok with the installation,BT is automatically found, the only trouble is that when I try to navigate to a place that is about 3-4 Km from me, everything's ok,but if I'll try to set up a trip of more than 5Km the navigator go crazy and told me that I 've reach my destination after just 200 meters.
I've tried to free up as much RAM asi can, but with no results.
Any idea???
Sounds like a real threat for TomTom... :lol: :lol:
And sorry guys but an idea of installing a whole europe map as an only option is pretty riddiculous for me.
950MB needed even If I never go out of London :roll: .
Have an unique map it's just an option and if you travel all over Europe and drive for more than 1200Km in one day is wellcome...
The real problem is that I've tried TT5 and I've problem with maps not up to date,BT interference with my handsfree...
I try with Navigon and still have troubles....
Is there any software house who is able to provide a software that really works??????
Hi All,
Which of these navigation services offer the best UK traffic information ?
TomTom Traffic uses data from ITIS holdings which generates very accurate traffic flow data... I swear by it!
giomir1599 said:
Hi Baudy2,
after reading your post I've installed on my xda exec Navigon 5, everything is ok with the installation,BT is automatically found, the only trouble is that when I try to navigate to a place that is about 3-4 Km from me, everything's ok,but if I'll try to set up a trip of more than 5Km the navigator go crazy and told me that I 've reach my destination after just 200 meters.
I've tried to free up as much RAM asi can, but with no results.
Any idea???
Click to expand...
Click to collapse
You've forgot to pay for the Navigon software.
There is no Navigon 5.1 cracked. Only 5.0. So, downgrade to 5.0. It works like charm.
Please help
I re-insstalled TT5 on my MDA Compact/S100 after cold boot.
After pairing an adapt 300 BT receiver, I installed it in TT on Com5, like before
It worked like a charm before, but now I see only about 9 greyed-out satelites and TT is telling me "no useble GPS signal".
the longest I have waited for more then an hour but no change.
Re-installed the whole thing, restored a backup in which I had no problems. Been trying for days now
Still no useble signal
Installed TT5 on a Vario/Wizard, same problem.
Can the receiver be faulty?
Can anyone please help me?
UPDATE:
I also installed Navigon 5.
Program finds the receiver, but also cannot find a good signal.
Went back to the store, I will get a new receiver. It is probably faulty
Hi - my country hasnt got tomtom maps. I have a bluetooth GPS paired to my JasJar. . Does anyone know any application where i can put down my own way points and navigate using the Jasjar in connection with the Bluetooth GPS from point topoint.
tks
darrel
Where are you from?
I have "normal" navigation to "on-road" and OziExplorer to bike off-road trips... It can work, but it is without voice instructions...
Thanks
Thats interesting. I am from sri lanka. How can i get that software that you use.
Hi there,
I'm terribly newbie with Jade, so sorry........
I have installed TomTom navigator 7 but GPS doesn't work (I cannot fix sats).
Which GPS must I set in TT configuration?
- integrated GPS receiver
- cabled receiver
- other receiver GPS NMES
And what about com port??
thanks
http://forum.xda-developers.com/showthread.php?t=481671
see in this post
integrated GPS receiver is the one.
When testing, dont expect it to work indoors...
Thank you, that's right for the internal receiver.
Now I've got another problem: I cannot see the sat bar during navigation (I can see the bar but it's empty - no sats locked, even if TT is working right) and I cannot see locked sats in GPS status menu.........
Moreover, when I select a destination if I press "C" letter (only C, with other letters everything is ok) TT stops working and I must reset it.
Can you help me please?
My TT version is 7.450.9028
Thank you
Hi,
try the version 7.915.9196, it works fine on my Jade without problems
bye
Andy
Try Ndrive 9 its ok , and tt Navcore.8.413.1237 its ok to
to test and clean the memory use HTC GPS toll