JASJAR_WWE_13076_164_10900_wwe_ship.zip is now available officially on the Clubimate site for the Jasjar.
For me the download was very fast and I could complete the download of approximately 62 MB in less than an hour. Probably not too many of us were still aware and therefore the load on their servers was still not that much.
I am now going to install it and come back with a feed back.
Kind Regards
Please post it on the XDA FTP?
Could someone upload this to our FTP site?
JASJAR Update
I did the update; got to the point where I had to do the cold reset; press 0; and nothing happens.
Any thoughts?
[email protected]
So did I acouple of times.
Make sure USB is into pc and not via hub/port replicator.
I found an old radio only upgrade (1.06) and ran that and when it finished it allowed the universal to restart with then new ROM done.
Will have to go back and do radio 1.09 only upgrade again on its own
Where did you find the old radio only 1.06? Can you send?
Rich
Related
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
bamse said:
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
Click to expand...
Click to collapse
Hi,
Seems like you are another of the many victims who got problems
after trying to upgrading new ROM & Raidio stack. Hope you still
got that warrant and get it replaced with a new one. Otherwise
you might have to try what some crazy guys do here trying to fix
it by doing all sort of bootloader etc.. Hope those who are trying
to get the upgrade ROM and Radio stack be very careful and make
sure your device are from the same supplier or distributor where
you got the new upgrade. Otherwise it will be screwed. Dont learn
your lesson the hard way.
same problem here.
i've got the O2 NL XDA
downloaded the 3.15 and radio updates from O2 NL website
installed updates as per instructions
1st update went without a hitch
2nd update totally screwed my xda.
now it takes a long time to start up, and when it does it just displays a white screen with a blue taskbar.
tried the bootloader way of flashing the rom, but still no luck
luckily I can send it back in to O2 to have it fixed.
I may try to do it by backup up another XDA, and reflashing mine.
Same prob with me..
I've got exactly the same problem. I downloaded the Rom update 3.15 and the new radio update. First I installed teh Rom update and after a hard reset I "installed" the radio update.
While updating the XDA hang and I waited for about ten minutes to see if the XDA was really hanging. I gave the XDA a hard reset but then the XDA didn't work anymore (white screen and blue bar on top).
I can still access the bootloader. I installed a Rom from a XDA which still works. Still no difference. When I tried to write the Radio rom to a sd-card I got that message that I have to connect one or another RS cable.
The XDA still doesn't work anymore. I have contacted O2 but they told me that they couldn't help me because they can't find my IMEI number in their system. I contacted the company where we ordered all the XDA's but I still don't have an answer.
Thank you O2 for being so nice with not helping me out with my one week old XDA without any scratch. I hope my XDA could be replaced as soon as possible since the XDA will not sold anymore when O2 changes to Telfort !
If you can make the ROM update work, you should be able to install the corresponding radio as well.
Try this:
1. Make sure you have the latest version of ActiveSync (=3.6)
2. Make sure the battery is fully loaded.
3. Extract the ROM update and Radio update to different folders.
3. Connect the cradle to AC-adapter and computer.
4. Put the device in the cradle and make sure it connects to ActiveSync.
5. Run the ROM installation application. Should take 5-6 minutes.
6. Run the radio installation. IMPORTANT: When you are prompted to remove power supply, pull the power plug from the cradle. If you do not disconnect power, the update will fail. I think this update took a little more time than the ROM update, and the device may seem "dead" for a while.
Good luck!
Hy Guys.
Are there any news about the problem flashing the XDA?
Tried last night to update my XDA to the last Qtek-Versions (ROM 3.16.52.....)
ROM Update works fine, but after the RSU Update the phone didn't work any more.
Have the same white screen with the blue taskbar and the little keyboardicaon down the right side.
Entering Bootloader mode there comes the Error Message "GSM Error"
Nice screen is the qtek "Booting Screen".
It shows
G <empty>
R <empty>
3.16.52
Hope there are any other hints to resolv this problem.
Have anyone got some experiences with sending it back to O2 with an "unoffical" Softwareversion?
Or is there any posibility to change the ROM Version to an old (original) O2-RomVErsion?
Thanks for any help....
Regards
Stefan
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Regards,
Riccardo
Riccardo said:
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Click to expand...
Click to collapse
SD-Card Writer just orderd
But I don´t know if it will work. Since the Bootloader says GSM Error, I think there will be no other posibility to restore it.
Let´s wait for some days, hope and we will see.....
Stefan
But thanks to this forum I can Usually/so far fix it....however, this time may be different.
I have without problem upgraded, downgraded radio stacks, flashed ROM's and altered bootloaders, but this time tried everything, read every post on this, 4 different seach peramiters no luck. I think I really did it this time Here's where I'm at:
T-Mobile phone edition
bootloader: 5.15
was rom: 4.001 Radio: A.20
on: AT&T Wireless US
Was having trouble with signal realized that I upgraded the radio last time then the ROM. Under T-Mo rom you could run the RSU upgrade and it would reintall the radio stack no trouble as long as you didn't touch the device. This time with A.20 stack it froze at 13%
Where I'm at Now:
Can: get bootloader
Can: change rom's via bootloader
Changed: rom to 4.0016 via bootloader
Cannot: get it to boot past Test only screen which reads G<blank> R<blank> 4.00.16<appears at bottom>
Cannot: connect to activsync
Cannot: get to today screen (no matter how many soft resets+holding volume+power on/off+power cable/no cable or any combonation there of)
Anyone been able to beat this hang? I think this is it for my little guy :roll: unless a wise master can teach me something new to reincarnate it
Can you get anybody with a backup sd card of ce and boot from their machine and try that from bootloader. Maybe that would get you going and then you could maybe flash the radio again.
I had it too with that TMobile ROM. I posted in some threads, read virtually all methods. Nothing worked.
But I eventually fixed it by sending the unit back to the importer for service and had them replaced the main board.
Some of my stories are contained in this thread:
http://forum.xda-developers.com/viewtopic.php?p=25450#25450
You need to wait an hour or more to allow it to boot. It will eventually boot, from there you can retry the radio stack from within windows (copy the four files to your windows directory).
There is a thread on this.
Good luck.
Hal.
thanks guys I'll give it a go with the wait for an hour bit. Already am able to flash the rom so lets hope the one hour or more wait does it :shock: I search all the threads just curiouse if you happen to know where it is post a link in this thread for others. I'm also going to search again and post it..if I find it this time that is :wink:
Hi,
I seem to have made my MDA compact II a brick. I was having problems hard reseting it (Format FAT failed) so I tried upgrading to a different firmware.
I now have the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
firmware on it. This is not good as it is for the Prophet, although it says in the Wiki that this should work. Anyway I can now hard reset the phone, so all I need to do is flash the TmobileUK firmware back on it. The only problem is that it doesn;t let me do it. It says error:296 upgrade only.
Anyone any ideas?
cheers.
extract the contents of the t mobile package using win rar
download
ftp://xda:[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
and put in the same directory and run.
It gets to 1% then says invalid command, not for this phone.
Latest T-Mobile ROM is at http://www.tm-phonedownloads.com/download_manager_mda_com2.html
very stable, much better than the original shipped ROM
Finally got it back.
If you have a T-mobile MDA II (Charmer), then Flash it with a Prophet ROM, the only way I could get it back was to use the following:
RUU_Charmer_100_100_049_CHS_Ship.rar
typho5 -x nk.nbf
Then created a new nk.nbf with the output using nb2nbf.
I then Flashed this with Wizard_RomUpgradeUtility_noID
And miracle it started. I quickly CID unlocked it and am now flashing with latest T-mobile.
My problem was that the Rom Update programs wouldn;t read version 2.xx ROMS.
Anyway it has just finished and looks fine. Thanks for everyones help, now I just have to get my SD wifi card working.
How do you do it
Hi I just got a MDA compact II from T Mobile UK I would like to upgade the ROM but its all very new to me since you know what you are doing can you post an idiots guide to the process.
Hope you can help
Hi, it depends what Rom you want to upgrade it to, the latest one from T-mobile is pretty good. There is an unbranded one (no T-mobile logos or suchlike) or there are Roms in different languages. It depends why you want to change the firmware and what to.
I suppose I don't really know the problem is as I just got the thing did some searching and came across this site read your post and thought i want to do this maybe you have some suggestion. Also I tried the RUU mentioned in an earlier post but it I can't update when I get to the from/to screen it tells me I will go from 2.6.2.110 to 2.6.2.110 I was expecting to move up.
daveh1171 said:
I suppose I don't really know the problem is as I just got the thing did some searching and came across this site read your post and thought i want to do this maybe you have some suggestion. Also I tried the RUU mentioned in an earlier post but it I can't update when I get to the from/to screen it tells me I will go from 2.6.2.110 to 2.6.2.110 I was expecting to move up.
Click to expand...
Click to collapse
Sounds like you are running the latest version. Is there a problem with the phone? If the phone works fine, I would just unlock it using lokiwiz02b (So you can use any network card) and then EnableRapi (So you can run unsigned code) then CID unlock it using awizard (so you can use any Brand/Language of ROM).
If you have no problem with the firmware I would leave it alone.
Hi,
Yep, I'm in the same situation, why does the prophet firmware load onto the charmer without erroring? !!!
Anyway, I have a copy of RUU.rar but I'm having problems working out what I need to do to it between unpacking and flashing the phone (i.e. the typho5 bit and then the nb2nbf).
Can someone please help me out?
P.S. The phone just sits at a black screen that says 'Dopod' across the front at the moment
Can anyone tell me how to 'force' a downgrade of firmware? I've got what appears to be the right firmware from FTP but it won't over write the incorrect version 2 installation as the uploader software thinks it's later therefore better.
There has got to be a better option from the command line surely?
HELP phone is dead
Chirpy said:
Can anyone tell me how to 'force' a downgrade of firmware? I've got what appears to be the right firmware from FTP but it won't over write the incorrect version 2 installation as the uploader software thinks it's later therefore better.
There has got to be a better option from the command line surely?
HELP phone is dead
Click to expand...
Click to collapse
Progress, but now it works only from the charger so the shipped ROM upgrade won't work as it reports the battery as being at less than 50%.
Anyone know how to force a ROM upgrade or where I can find the right ROM files to use awizard to do this?
Hey guys,
Im another newbie, but who is actually scared of screwing up the phone. I have the Tmobile MDA compact III obviously, and the information page looks like this:
ROM version 1.13.114.1 NLD
ExtRom version 1.13.114.101
Model nr ARTE 110
CPU OMAP850
Im not so sure what this information tells you people who are knowledgable about this, however can I safely use the customised powermap file from this website's ftp (ftp://ftp.xda-developers.com/Artemis/Customized_ROMs/) to change the phone to english?
What are the procedures EXACTLY please, and what problems should I expect.
Another thing, what is CID lock, and how can I see if mine is or not?
I checked most of the threads, so I am knowledgable about this issue a bit, however because none of the topics were specifically about the Dutch version I wanted to make sure. Thank you a lot for your help...
1. you have to CID unlock your phone. only real solution is imei-check website, and that will cost you $40. this will prevent MANY of the problems with installing ROMs
2. don't do updating on Vista PC, use XP or older
3. follow on screen instructions of your chosen ROM update utility. don't panic if it takes too long and looks like the update process has "freezed". make yourself a coffee and let it finish installing.
4. enjoy!
PS... i strongly suggest you read as much as you can on this forum before doing any upgrading.... then you'll know what to expect.... and of course, don't forget that only YOU are responsible for anything that happens to your device, good or bad... good luck!
hey dim4x4,
thanks for the post, I appreciate it. However is the exe file I mentioned (customised power map) the right one? i know there are a few options to chose from, like the 3 options of the pdamobiz.com website. While im not too clear of the main differences, the general concensus on the forum is that the powermap is preferred, and has a lot of nice things. Is there a better one? perhaps on a different ftp. Maybe if you have one you can send it to me.
Another thing, if it dont work, or works and I dont like it, can I get back to my original ROM, the dutch one from the tmobile dutch file on the ftp site as well?
Thanks
1. Personally, I use PDAmobiz Lite version. Powermap version has a map of Thailand which I don't need. "A lot of nice things" for my purpose is a lot of unnecessary stuff. If I need something I can install it myself into RAM or storage card. You have to choose the version which suits you best.
2. Everything is on this server. You have to register to log in http://www.wm-gurus.com/registration/signup.php
3. I went back and forth with different ROMs (versions, languages, etc.) without any problem until I found more or less what I want. Please note, my device is CID unlocked by imei-chek.
Good luck!
Urgent Help
I tried the powermap version of the ftp. This is exactly what I did:
I connected the phone and established contact through activesync, then I started the exe file. The DOS windows opened, and then it started initialiying, and the process started. It said that it will take 15-30 mintues, and the process has started. So far im sure everypone is familiar with those. However, I waited about 35-40 minutes, and still nothing different on either screens. The DOS window said however that if nothing starts I should reset the process. I tried but didnt work. At that time I tried to reset the phone and now it is stuck in the startup screen. All I see on it is the IPL/OS data, and it is not moving further.
Please help, what do I do now?
So this is what I did so far....
1. Flashed with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe (with device on Today screen)
2. The process started and stuck on "uploading file [don't remember] and as the instruction said I reseted the phone after 30 minutes.
3. All there is on is T-Mobile splash screen, version infos and that's it.
5. Tried to flash again in bootloader mode but the device was not visible by PC
How do I go from here? Maybe I need to flash the original rom version of the phone. I have the dutch tmobile mda compaxt III, but with the dutch ROM version on the ftp of this site is scary, because there are too many files and have no clue which one to flash.
Any suggestions?
There is no Dutch T-Mobile ROM available yet.
You could try the English T-Mobile ROM (art_tmouk_11311001_024990_wwe_ship.exe), which is available on this site: http://www.wm-gurus.com/registration/signup.php
There's a chance this ROM will work on your Dutch T-Mobile phone, if the signature is correct (I assume your phone is still CID locked).
Read this link http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets on how to enter the bootloader of your phone.
mRmAGIC...
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?
tghobar said:
I Tried That Already; But I Got An Invalid Id: So I Dont Know What Else So Far: Do You Think I Have To Cid Lock The Phone To Be Able To Try The Other Versions?
Click to expand...
Click to collapse
CID unlocking isn't possible if your phone isn't working.
If you don't have your original rom, you have to contact your provider to repair it.
try from bootloader screen
Hi I also did as u did but with a hards reset in the beginning.And it worked fine.read somewhere that if u dnt do a hard reset you could get into problems.If u can try to go to bootloader screen and try to flash from ther.
flashing from the bootloader screen gives me an error, the file cannot recognize that a phone is connected to the PC. that is the biggest problem I think.
DO you know how to flash the Tmobile NL version on the ftp. there is one that I dont know how to use
OK, I've RTFW'd, I've google'd xda, and found a couple of things, but what I really wanted from link below appears to have been moved without a trace ...
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
Also I tried these... http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Also, I tried the below file too, but when it rebooted to the three colour screen it lost it's connection to active sync and returned the good old connection failed error.
ruu_hermes_tmhu_1.21.116.4_1.05.02.00_wwe_ship.exe
So what now? Well I've been fairly happy with WM6, but really just want to roll-back for now to get full functionality again (transcriber, MMS send while GPRS connected, quicker system, etc, etc).
Could anyone help with either of the above questions please?
Muchas gracias,
Vario II- - UK T-Mobile
HERM300
IPL-1.01
SPL-1.13.Oli
ROM 3.23.0.2
Radio 1.40.30.00
All ROM images were reomved from the site because of Micro$oft was complaining. you can down load the orignal ROMs from HTC. If you are a cingular customer withan 8525 here is the link to the site
http://www.htcamerica.net/index.html
If you are overseas then you will have to find the link to HTC for you vendor.
Install OLIPRO 1.10 SPL
then
Install Original ROM
Oh yeah, it will always lose the active sync while upgrading. This is normal its tryin to flash!!!
You can also try flashing VIA SD CARD.
Cheers
Thanks guys,
I'm a UK T-Mobster, so I'll try the bootloader change then re-ROM.
As for the ASync link loss, unfortunately it timed out the RUU app that was trying to flash the phone and nothing happened for over an hour, so I aborted.
Any hints for flashing from the sd before I step forward (ps yes I've RTFW'd that one too, just looking for personal experiences, caveats, gotchas, etc)
Cheers