To my experience with wm5 (on Dopod 900) is that installation is causing more trouble. One is that if we uninstalled application and then installed it again (for example upgrading/updating) error message some time occur "... not successful... please install on other place... * device *storage card
Even after deleting the registry and soft reset. I can install application and the only way is to hard reset and install the updated application.
Anyone face the same problem. Perhaps this is installation issues.
yes it's issue with Windows Mobile 5
you have to clean the registry as well as the folder.
And then you can reinstall the software. it's very annoying.
Related
I used XDAII. In recent days, after hard reset and installed some software, when each soft reset, my device had the warning: " Can not find 'loader'(or one of its components). Make sure the path and filename are correct and all the required libraries are available." I didn't know what is loader.exe, and the way to solve this problem ?
Could anybody help me?
Did this error occur before you installed the software?
One possible cause for such an error is if some software you installed has a 'loader.exe' file that needs to run on startup (after soft reset). If this file was installed to a SD/CF card the system can't find it during startup.
If you have software that needs to run on startup you should install it in main memory.
If this doesn't help try posting some more details: does the problem occur on a clean device (right after hard reset), what programs did you install, etc.
Good luck!
Since i bought the dopod818Pro,i have experienced a few installation problems...
1.)I installed Battery Pack Pro,Installed perfect.....found out it was the old version,uninstalled and tried installing the latest one....Unsuccessful whether i select device memory or storage memory.....Couldn't get the latest to install no matter what i tried......Had to hard reset to install again. :evil:
2)Installed resco explorer and tried installing resco audio player....again same problem :x
Anyone out there that could help with the installations....I guess it is an inherent WM5 OS problem
Many problems with WM5 install, uninstall.
I think this may help:
+ If you get installation error, do a soft reset your device, than install the program again.
+ If you get uninstall error, agree when being asked to remove the entry from the list. Re-install the program, then try remove it again.
I have had many pocket PC's and the Universal w/WM5 is the only one that gives me consistant installation problems. I had listpro 3.0 installed in program memory. I uninstalled it with the intent of re-installing it on the SD card. Unchecking it from activesync did nothing. Removing from the ppc directly told me that all of the file were not removed. I saw the the folder still existed in program files, do I deleted the directory and shortcuts pointing to it. I have had this exact same problem MANY times
Am I the only one with this problem? I don't find any messages like this.
Next, I try to reinstall listpro and it won't reinstall :x I get a message cannot be installed, try another location (which does not work). Do I need a hard reset? I tryed installing another program and I can still install other stuff, but the removal did not work again.
GaryK2 said:
I have had many pocket PC's and the Universal w/WM5 is the only one that gives me consistant installation problems. I had listpro 3.0 installed in program memory. I uninstalled it with the intent of re-installing it on the SD card. Unchecking it from activesync did nothing. Removing from the ppc directly told me that all of the file were not removed. I saw the the folder still existed in program files, do I deleted the directory and shortcuts pointing to it. I have had this exact same problem MANY times
Am I the only one with this problem? I don't find any messages like this.
Next, I try to reinstall listpro and it won't reinstall :x I get a message cannot be installed, try another location (which does not work). Do I need a hard reset? I tryed installing another program and I can still install other stuff, but the removal did not work again.
Click to expand...
Click to collapse
Hi Gary!
I have a lot of experience in this sh*t. WM5 cannot uninstall or install in a lot of cases. Usually if you still have some files or folders which are on the same location than with the installation, installer says: cannot install. In that case you have to delete (or rename) the folder left, and then you can install it. In other cases installer stays in a loop install condition, and cannot continue. In that case try to install another application to finish somelooped order. I realised another thing, which is very interesting: when you want to uninstall a program, and your pda says it cannot be removed - or something -, if I run Vijay555 killphone application in 98% of the cases after it I can uninstall the same.
I hope this wil help!
Hi,
Perhaps I have been lucky but I havent had any issues with regards to installing or uninstalling programs.
I do make sure that I soft reset before and after - so maybe thats a golden rule!
Matt
Yes, softreset would be a good tip in more cases, but it wouldn't solve the problem when you want to install a program which needs a place what exists.
I did find some files in the windows directory and deleted them. That WORKED. Just doing program files is not enough. In this case, the file name was the same as the program. I don't expect to be that lucky all the time.
I have done soft-resets when it does not work. I do a number of trial programs and tend to forget prior to removal. What a apin
Got to love Microsoft - reboot is the answer to everything.
Installation problems.....
I am having the same problem too.
Even after a hard reset when I try and install Sprite Backup & Agenda Fusion I keep getting the install error: 'cannot be installed, try another location'
It's driving me up the wall! I would have thought after a hard reset this wouldn't be an issue. I'm now the proud owner of an MDA Pro (Universal) that I can't use because the software I want to install won't install.
Can anyone help me please?
Hi,
My HP 6915, when i make a soft-reset doesn´t ring and does not assume the changes, for it to ring.
i can´t resolve with hard reset because it still the same.
did anyone had the same problem?
thanks
did you recently plug in the headset? If so try plugging it it in again and take it out slowly (sometimes the contact has been known to get stuck)
Did you install TOmTOm on it, there is a known issue with sound after installing this app. This is what solved it for me:
I have found a solution to the issue with TomTom 6. When it installs, it overwrites two dlls in the PPCs Windows directory, BtCoreIf.dll and BtSdkCE30.dll. Immediately after TT6 install rename each of these to .old, or delete each file. Windows automatically re-installs the originals. Do a soft reset and all then works ok.
eastdick said:
Did you install TOmTOm on it, there is a known issue with sound after installing this app. This is what solved it for me:
I have found a solution to the issue with TomTom 6. When it installs, it overwrites two dlls in the PPCs Windows directory, BtCoreIf.dll and BtSdkCE30.dll. Immediately after TT6 install rename each of these to .old, or delete each file. Windows automatically re-installs the originals. Do a soft reset and all then works ok.
Click to expand...
Click to collapse
Hello! i am reviving this thread, because i also have a sable 6915 and recently after a day of normal operation the phone stopped giving sound. The only thing different was that i had the CPU overclocked to a safe setting on "pocket hack master: 520 mhz".
I tried hard reseting with no luck... I don't think that it has to do with hardware, but you just never know...
anyone else with the same problem, that found a solution?
Almost any program I installed from this site or others ended up with a messege: "An unexpected error has occurred in [file name]. Select Quit and then restart this program, or select Details for more information."
I would realy like to know how do I solve this problem.
My phone is running 1.66.405.2 ROM.
First off, can you give us a link to something that you downloaded and you had this problem with?
Secondly, does it install and then not work, or did it not install?
Finally, what does it say when you get the error and click "details"?
your system wont let me send links so here is a list of names of applictions:
-New SimplePiano with Dual-Touch Enabled
-Star Wars Sounds for Windows Mobile
-SRS WOWHD For HD2
-Lock Screen Middle Tweak - this one runs OK.
it happens after installation when I run the program
and the details starts with "[file name].exe platform not supported exception..." and then a list of what looks like paths.
If theres a need I shell copy it all.
Hi,
It could be number of issues....
i) Have you installed sdkcerts.cab (and sdkcerts new .cab)?
ii) Are you installing to your SD card or device?...
- Do you have sufficient space on either
iii) Which version of Windows Mobile are you running?
iv) Have you installed the latest version of .NET?
There could be a long list of relatively small bits and pieces that are preventing you from successfully installing and running these .cabs. I know no one likes to do this, but if I were in your shoes and I was sure that I had installed the above...
I would hard reset and therefore not have to worry about this problem.
I. No I havn't installed sdkcerts.cab. What is it and where do I fined it.
II. I install al of it on my device which now have 19.56 MB free for stoרשעק שמג 165.41MB free for programs.
III. windows mobile 6.5
IV. Same as I.