Hi all,
I got a problem with my MDA compact.
It happened just today, i pressed power button to put phone into standby and the screen just stayed lit showing the today screen, but i lost all functioning.
The phone doesnt respond to anything until a reset.
Ive tried a hard reset and the power button works when ur aliging screen etc... but when the today screen loads it ***** up again.
Any thoughts?
Hey all,
It seems to be fixed now, i just did multiple hard resets...
i've the same problem - sometimes my magician disables all hardware buttons.
i suspect the bluesolei blutooth stack - because i've not installed it after last hard reset and all works fine.
Related
Hi guys. My qtek 2020 has gone dead. i pressed the reast button and then it suddenly did not start. The screen is completely blank. The problem is that the power on/off button is broken and i cannot Hard Reset the device to try and start it up this way. When i press only the reset button nothing happens. Is there anything else i can do?please help
is it helpful to remove the battery as a "cold reset" ?
which battery. The backup one? because the main battery i have removed and nothing happens
guys i have a similar problem. my power button has broken and i turn on the device with the record button (i have remapped the buttons). Yesterday i turnd it on and the screen freezed on the today screen . I performed a soft reset, the screen went blank and it never turned on. Now the device is dead, soft reset won't work, it doesn't seem to charge (no light when i put it on the cradle) and i cannot perform a hard reset because i do not have a working power on/off button.
Is there anything i can do to turn it on?
...
Try to remove main battery for a longer time(up to 1 hour or more). The backup battery will discharged what causes hard-reset afterwards.
demstav said:
Hi guys. My qtek 2020 has gone dead. i pressed the reast button and then it suddenly did not start. The screen is completely blank. The problem is that the power on/off button is broken and i cannot Hard Reset the device to try and start it up this way. When i press only the reset button nothing happens. Is there anything else i can do?please help
Click to expand...
Click to collapse
ok so i have seen reset buttons that stick and will not go
did you try pressing the reset button aggain? do you fell the click he made?
try it
Hello all. I'm new to this...
I just bought a K-jam on ebay, charged it, turned it on and... nothing.
I am stuck on the boot screen that shows IMATE with the various versions:
ipl 1.01
spl 1.06
gsm 01.01.10
os 1.1.9.3
The device hangs there and I can't do anything: can't power off, etc... The only thing i can do is soft reset but that doesn't help...
Anyone has an idea? Sure enough the seller does not respond to my emails anymore...
Did you try doing a hard reset? press the com manager button (Top left on the side) and the voice command button (top right on the side) while having them pressed do a soft reset. Keep the two buttons pressed and the device should say something to the effect of "press send to restore to factory settings", hope that will fix your problem.
Might sound stupid, but my device freezes at boot-up somtimes as well.. ..However, when I tap the screen during bootup it doesn't! :wink:
In my case I think it's due to the amount of programs on my device
HEEEEYYYY come to think of it my device did that before I upgraded to xelecin's custom rom LOL I remember I had to stay looking at it to tap the screen as soon as it would turn off. Since it stopped doing it, I never really looked into why it was doing it.
The topic is quite clear - I installed the a2dp-hack some time ago - Bluetooth still was OK.
Before I overclocked the device (with the great tool from ikarus) the bluetooth function stopped working I.e. when I tap the bluetooth button in the comm-manager, the wait-for-process-symbol appears for 3 sec and nothing happens. Made a hard-reset yesterday to solve the problem - still no working bluetooth.
Is there a difference in doing a hard reset and doing a hard-reset and removing the battery? :roll:
Would be the last trick prior to sending the device to O2 Germany for replacement... :evil:
Or do you experts have an advice?
Cheers
Mic
hardreset:
push the commanager and the photo button and then press the softreset button with teh stylus near the usb plug.
when you see: "Press send to restore factory default, Other keys to quit" then press the green phone button and the hardreset ist done!
a removing from the battery ist no hardreset.
nighty
Hi,
I am using iPad 912c. I love this machine but the little silver power button is acting funny sometimes. Normally, when I press the button the screen should be turned off immediately. But sometimes the screen still on for 4-5s after pressing the button. First I thought I didn't press the button properly. But if I press the button several times the machine can remember how many times I pressed and switch the screen on and off (sometimes ask me if I want to turn off) like having a ghost inside. Looks like it has a buffer for the power button. I don't think it is the software problem. Because I tried to soft reset the machine. The machine still remember how many times I pressed the button before reseting and turn on and off the screen several times after the machine back on. It happens twice a week. Is it a hardware or software problem? If it is hardware problem the iPad should not know I pressed the button several times. This is not a popular machine but I am sure it is one of the best. Please help. Thanks.
Anyone has the same problem? Please help
Hi!
I have the same problem with my Hp Ipaq hw6915. Now phone is after reset, and I can't finish pre-config (time, etc), because screen is always turning off. Please help!
No ideas...?
Is there any program, that can permanently desactivate backlight button..?
Or something...?
Please help.
check if u have the same issues without the microsd
if u do (have issues..) then backup using spb backup (or any..) then hr your device and check if with a clean device all is good
Hi all,
This is my first thread after being around with the availble great roms for awhile, this morning I came across a weird problem, somehow when I try to hard reset my X1 ( 2 silver buttons, reset button with stylus ) it just reboots back, like a soft reset. So instead giving me the hard reset options, it just boots like normal with the SE logo etc.
This is the same when I try too enter the rainbow bootloader screen, device shut off, removed battery and reinserted. But when I press volume down and power button, is just reboots as normal.
The weird thing however is, that I am able to flash roms when I use the ruu tool, it just goes to rainbow screen by itself, I just cant do it myself with the hardware buttons, or do a hard reset! This always worked.. Any ideas ?
Edit : I reflashed hard-spl, did nothing to solve this.
Thanks!
To hard rest, it's the soft keys and the main power button, not the with the reset button.
Sfkn2 said:
To hard rest, it's the soft keys and the main power button, not the with the reset button.
Click to expand...
Click to collapse
no as long as your holding the two front soft keys when the phone powers on it should go into hard reset. but it only works properly for me when i use the reset button.
make sure your holding the two front keys until the HR screen comes up, again, don't just press them once, HOLD them until it says in blue writing on grey background, press r to reset then press the r on the keyboard to HReset
this is the same for entering bootloader, hold volume down (and make sure it is down not up) and power until you get the rainbow screen
Weird thing is, I know how to do these two tricks.
I did like 20 hard resets with the two soft buttons etc.
Same goes for bootloader, only that isnt a big problem cause
I found out I can use enterbotloader.exe in windows map. Maybe
theres a shortcut for the hard reset too? Thanks
js1987 said:
Hi all,
This is my first thread after being around with the availble great roms for awhile, this morning I came across a weird problem, somehow when I try to hard reset my X1 ( 2 silver buttons, reset button with stylus ) it just reboots back, like a soft reset. So instead giving me the hard reset options, it just boots like normal with the SE logo etc.
This is the same when I try too enter the rainbow bootloader screen, device shut off, removed battery and reinserted. But when I press volume down and power button, is just reboots as normal.
The weird thing however is, that I am able to flash roms when I use the ruu tool, it just goes to rainbow screen by itself, I just cant do it myself with the hardware buttons, or do a hard reset! This always worked.. Any ideas ?
Edit : I reflashed hard-spl, did nothing to solve this.
Thanks!
Click to expand...
Click to collapse
I have the exakt same problem I use smabergs latest rom, and I cant hard reset or enter tricolor screen, please anybody know how to solve this?