Hi guys. My qtek 2020 has gone dead. i pressed the reast button and then it suddenly did not start. The screen is completely blank. The problem is that the power on/off button is broken and i cannot Hard Reset the device to try and start it up this way. When i press only the reset button nothing happens. Is there anything else i can do?please help
is it helpful to remove the battery as a "cold reset" ?
which battery. The backup one? because the main battery i have removed and nothing happens
guys i have a similar problem. my power button has broken and i turn on the device with the record button (i have remapped the buttons). Yesterday i turnd it on and the screen freezed on the today screen . I performed a soft reset, the screen went blank and it never turned on. Now the device is dead, soft reset won't work, it doesn't seem to charge (no light when i put it on the cradle) and i cannot perform a hard reset because i do not have a working power on/off button.
Is there anything i can do to turn it on?
...
Try to remove main battery for a longer time(up to 1 hour or more). The backup battery will discharged what causes hard-reset afterwards.
demstav said:
Hi guys. My qtek 2020 has gone dead. i pressed the reast button and then it suddenly did not start. The screen is completely blank. The problem is that the power on/off button is broken and i cannot Hard Reset the device to try and start it up this way. When i press only the reset button nothing happens. Is there anything else i can do?please help
Click to expand...
Click to collapse
ok so i have seen reset buttons that stick and will not go
did you try pressing the reset button aggain? do you fell the click he made?
try it
Related
???????? :evil:
push "standbye" and "cam" button and than the reset
to show the colordisplay
and than put the usb in and flash another ROM
Click to expand...
Click to collapse
don't work (((
Well, this has happend to me a couple of times too, just hard reset.
Push Camera + Comm manager button together, then soft reset, but keep holding the camera and comm button.
When you get a message, click the green phone.
yeah, not sure what you're yelling, but i think your phone resets and only goes to a white screen and sits there?
happned to me and i almost cried. tried hard resets and nothing. left battery out for a day and nothing. i left it out again for a few hours cause i was pissed, put it in at 4am, did another hard reset and it started to work like normal, though resetted. keep trying!
I'd try all the stuff mentioned and make sure it is plugged in to the power supply.
hard reset and bootloader
for hard reset after you press both cam and comm button press soft reset the trick is dont release bot cam and comm bottons untill it prompts. finally press green button.
for boot loader device must be connected to crable or power. and press cam and power button then press soft reset. still the sam don release power and cam button until you see the color screen.
hi, after instaling pretty much of applications on my wizard it just stopped respond. if u do a soft reset it boots but freezest on todays screen and thats it. there is a massage dispalied "low memory". i cannot do a hard reset, upgrade rom anything. is there any other way to perform a hard reset ?? (i tried comm mnr+voice+plus soft reste) HELP !!!
cheers, matt
Some people have joy with - turn off - press and hold comm, record and camera buttons and press power on.
If that fails you should be able to flash your device with the same rom. Turn off, press camera button and hold then press power button and bootloader multicolored screen should come up. Connect via usb to pc and reflash rom.
Hi,
I am using iPad 912c. I love this machine but the little silver power button is acting funny sometimes. Normally, when I press the button the screen should be turned off immediately. But sometimes the screen still on for 4-5s after pressing the button. First I thought I didn't press the button properly. But if I press the button several times the machine can remember how many times I pressed and switch the screen on and off (sometimes ask me if I want to turn off) like having a ghost inside. Looks like it has a buffer for the power button. I don't think it is the software problem. Because I tried to soft reset the machine. The machine still remember how many times I pressed the button before reseting and turn on and off the screen several times after the machine back on. It happens twice a week. Is it a hardware or software problem? If it is hardware problem the iPad should not know I pressed the button several times. This is not a popular machine but I am sure it is one of the best. Please help. Thanks.
Anyone has the same problem? Please help
Hi!
I have the same problem with my Hp Ipaq hw6915. Now phone is after reset, and I can't finish pre-config (time, etc), because screen is always turning off. Please help!
No ideas...?
Is there any program, that can permanently desactivate backlight button..?
Or something...?
Please help.
check if u have the same issues without the microsd
if u do (have issues..) then backup using spb backup (or any..) then hr your device and check if with a clean device all is good
Hi all,
This is my first thread after being around with the availble great roms for awhile, this morning I came across a weird problem, somehow when I try to hard reset my X1 ( 2 silver buttons, reset button with stylus ) it just reboots back, like a soft reset. So instead giving me the hard reset options, it just boots like normal with the SE logo etc.
This is the same when I try too enter the rainbow bootloader screen, device shut off, removed battery and reinserted. But when I press volume down and power button, is just reboots as normal.
The weird thing however is, that I am able to flash roms when I use the ruu tool, it just goes to rainbow screen by itself, I just cant do it myself with the hardware buttons, or do a hard reset! This always worked.. Any ideas ?
Edit : I reflashed hard-spl, did nothing to solve this.
Thanks!
To hard rest, it's the soft keys and the main power button, not the with the reset button.
Sfkn2 said:
To hard rest, it's the soft keys and the main power button, not the with the reset button.
Click to expand...
Click to collapse
no as long as your holding the two front soft keys when the phone powers on it should go into hard reset. but it only works properly for me when i use the reset button.
make sure your holding the two front keys until the HR screen comes up, again, don't just press them once, HOLD them until it says in blue writing on grey background, press r to reset then press the r on the keyboard to HReset
this is the same for entering bootloader, hold volume down (and make sure it is down not up) and power until you get the rainbow screen
Weird thing is, I know how to do these two tricks.
I did like 20 hard resets with the two soft buttons etc.
Same goes for bootloader, only that isnt a big problem cause
I found out I can use enterbotloader.exe in windows map. Maybe
theres a shortcut for the hard reset too? Thanks
js1987 said:
Hi all,
This is my first thread after being around with the availble great roms for awhile, this morning I came across a weird problem, somehow when I try to hard reset my X1 ( 2 silver buttons, reset button with stylus ) it just reboots back, like a soft reset. So instead giving me the hard reset options, it just boots like normal with the SE logo etc.
This is the same when I try too enter the rainbow bootloader screen, device shut off, removed battery and reinserted. But when I press volume down and power button, is just reboots as normal.
The weird thing however is, that I am able to flash roms when I use the ruu tool, it just goes to rainbow screen by itself, I just cant do it myself with the hardware buttons, or do a hard reset! This always worked.. Any ideas ?
Edit : I reflashed hard-spl, did nothing to solve this.
Thanks!
Click to expand...
Click to collapse
I have the exakt same problem I use smabergs latest rom, and I cant hard reset or enter tricolor screen, please anybody know how to solve this?
hi guys!
long time with no post from me but today the stupid thing (HD) did it again
i installed an app for home page tweaking and after the soft reset my HD dosen't starts right
it boots, does what it does but it sucks on the black screen with some icons on the top bar and the names of the soft keys on the bottom bar. i can only turn ona anf off the screen by pressing the power button, but nothing else. screen doesn't react, soft keys don't react either
i don't realy want to hard reset it because it took few months to make it working right, but i would do also this if there is no other solution
BUT...
when i try to hard reset it it stucked again in the tricolour mode with "SERIAL" word on the botom
what is this? i can't write anything so what is this serial all about?
so, please let me know if there is any solution for:
1. step by step booting in order to skip the process or application that cause the stuck?
2. how can i hard reset the thinggie?
thanks a lot!
Had the same problem after I installed HTC home and HTC customizer...after a soft reset, TF3D failed to load and the phone froze. Had to hard reset in the end--thankfully, I run a backup once a week, so I really didn't lose anything. I was able to run 'Clear Storage' before TF3D's startup fail managed to freeze my phone. So it's all good on my end...
Backup backup backup...a little too late...
Maybe you are not doing the hard reset correctly, you press and hold both Vol up & Vol down keys, whilst holding down power button aswell until it turns on. Hard reset screen should come up.
noris08 said:
hi guys!
long time with no post from me but today the stupid thing (HD) did it again
i installed an app for home page tweaking and after the soft reset my HD dosen't starts right
it boots, does what it does but it sucks on the black screen with some icons on the top bar and the names of the soft keys on the bottom bar. i can only turn ona anf off the screen by pressing the power button, but nothing else. screen doesn't react, soft keys don't react either
i don't realy want to hard reset it because it took few months to make it working right, but i would do also this if there is no other solution
BUT...
when i try to hard reset it it stucked again in the tricolour mode with "SERIAL" word on the botom
what is this? i can't write anything so what is this serial all about?
so, please let me know if there is any solution for:
1. step by step booting in order to skip the process or application that cause the stuck?
2. how can i hard reset the thinggie?
thanks a lot!
Click to expand...
Click to collapse
Sounds like a software issue Hard Reset sounds best
What you are seeing (Tri Coloured Screen) is the boot loader it probably showed up because you didnt hold the volume up key when doing Hard Reset
its not a problem just remove battery
then do hard reset (make sure both volume buttons UP/Down are press at the same time and press power button ..........follow what the screen says
thank you guys for your opinions
i know how to do a hard reset (cause is not the first one) and i tryed severl times before i post my request here
finaly i manage to do an "upgrade" using USB connection from my rom version to the same rom version. strange but this is what i did, and then i was able to do the hard reset in the usual manner
now i am working hard to restore all applications andtweaks that i had
luckily i use often backup and i still have contacts and personal infos