just found something interesting. If you lookin the registery under hklm\extmodems\hayesCompat you can find the comport number set to 1.
I changed this to 4 ( > softreset) and made a dialup connection on my s100 to "hayes compatible on com1". On my pc i manualy connected the bluetooth serial port (to com4 on s100) and opened hyperterm on com6 (on xp).
so you get a connection like this
Hyperterm
|
XP Com6
|
Bluetooth
Bluetooth
|
s100 Com4
|
Hayes compatible modem dialup
hyperterm nicely displayes the modem handshake.
Now... could it be possible to use some sort of virtual modem driver to localy dialup to your own pc, thus creating your own PAN connection using the normal MS bt stack?
lemme know
Marco
Rules!!!
This seems to be an interesting possibility! Please all you skillful programmers out there help us to get around the drawbacks of the *@# MS Stack!
Hi there,
I have an Qtek 2020 and I've installed WM2005.
ROM version 1.60a.00WWE
Radio Version: 1.14.00
Protocol version: 1337.24
I want to use newtwork access service but I cant.
when I want to setup this service in My Bluetooth places. it sais no Device found. and when I find manually it sais that your device has not network access profile.
I tried to install WIDCOMM BTW-CE but it didnt installed. it sais that no bluetooth radio found!!
I really need network access. Please help me!!!!!
if you can sync with activesync using bluetooth then you can connect
not sure if 2005 BT stack support the bluetooth PAN profile
and not sure if there are any widcomm out for 2005 yet
I had this problem also before I install WM2005 with the same error.
I thaught maybe I should upgrade my radio versio !!!!
the radiostack is only related to GSM not bluetooth
these are guides as to how you activesync with bluetooth
http://www.geekzone.co.nz/content.asp?ContentId=3163
http://www.geekzone.co.nz/content.asp?contentid=2417
Most of the time.. its more acurate when you connect from PC to PPC not PPC to PC.
I think my English is very bad
I can connect to ActiveSync without any problems.
My problem is to use Network Access service.
I have no problem with other services sych as Audio Gateway, Headset, Ativesync, Serial port and...
when you are connected with activesync then you have network access!
if you minimize activesync while it's connected then you can just open IE or messenger or what ever
that is unless you disabled it in activesycn on the pc or the firewall on the pc block it
or if you have set it to use your isp network insted of your my network in connections on the pocketpc
No... you didn't understand me.
I want have an IP address for my pocket PC as you connect with WiFi.
And explore the shared folder of the network PCs with Resco File Explorer.
Wee this picture.
When I connect with USB my pocket PC get and IP address and I can ping it.
I want to do this also when I connect via bluetooth.[/img]
oh dident know that activesync using bluetooth did not assign an ip to the xda2
well then there are 2 options i guess
1 find a widcomm or another bluetooth stack that works on 2005 which support the PAN profile (pan is network over bluetooth as in not using activesync)
2 downgrade to 2003SE or 2003 and get the widcomm stack which works for it and support PAN
I've installed the WIDCOMM. but the previouse BLutoth stack did't remove. and now I have too icons of bluetooth!!!
but widcomm did't work properly and it sais that: "The Bluetooth radio failed to turn ON due ro insuffivent driver menory available. [!!!] you must perform a normal reset before you can turn ON the Bluetooth Radio.
eAfzali said:
I've installed the WIDCOMM. but the previouse BLutoth stack did't remove. and now I have too icons of bluetooth!!!
but widcomm did't work properly and it sais that: "The Bluetooth radio failed to turn ON due ro insuffivent driver menory available. [!!!] you must perform a normal reset before you can turn ON the Bluetooth Radio.
Click to expand...
Click to collapse
Try to use PocketLanCe: www.pocketlance.com
I have the same problem... htc p4350, wm5 aku3/3.5 the wm device doesn't see the Network Access bluetooth service which the PC is running. (pocket pc doesn't seem to support Bluetooth PAN correctly). This is crap. In the year 2007, simple things like bluetooth pan shouldn't go unimplemented in an operating system built by the richest software company in the world. on a device i paid $500 for. i could implement this stuff myself in less than a week if the code weren't closed source. gosh i hate hate HATE our world.
also the pocketlance website is password protected..
Hey All,
I have a problem with my O2 XDA s. I am using an application written in visual c# which is known to work on other phones. I have tried both a Holux GPSSlim 236 and another GPS device.
Both show up fine when I scan for them and I'm able to set up a "partnership" and add an outgoing comm port bound to the device. But when I start the program all I get is "On, StartingUp" I never recieve any GPS data.
Attached is the source code which I believe is a slightly modified version of Microsofts example source code. Any help would be greatly appreciated this is a rather frustrating problem!!
My device is an XDA s running windows mobile 5.0.
Cheers
Jona
Hi there,
sry for my bad english...
I already got a Pharos from my company and I installed a navigation software which works quite fine. the other day I purchased a bluetooth TMC module to get the latest traffic news for the route calculation. this module operates with the SPP (serial port profile), but the Pharos (with standard WM 6.0) doesn't support that profile. I get a bluetooth connection but the tmc module is not recognized correctly by the Pharos.
is there any possibility to unlock these bluetooth profiles (so that I can use this tmc thing), or is this not working because of the hardware? I'm, sry but I am not that professional in these things
thx in advance
what version of pharos you have? traveller 127 0r 117 ?
I'm sry, but I don't know...
It's a HTC P3470 and if my informations are right, it must be the Pharos, or not???
nobody any ideas???
maybe with an update to 6.1? can somebody confirm that?
thx in advance
does anyone know if it is a Hardware issue or is it possible to activate a bluetooth profile with a Software update?
Sperti said:
Hi there,
sry for my bad english...
I already got a Pharos from my company and I installed a navigation software which works quite fine. the other day I purchased a bluetooth TMC module to get the latest traffic news for the route calculation. this module operates with the SPP (serial port profile), but the Pharos (with standard WM 6.0) doesn't support that profile. I get a bluetooth connection but the tmc module is not recognized correctly by the Pharos.
is there any possibility to unlock these bluetooth profiles (so that I can use this tmc thing), or is this not working because of the hardware? I'm, sry but I am not that professional in these things
thx in advance
Click to expand...
Click to collapse
I don't have a TMC module, but there is a "COM PORTS" options in my BT setup. Did you try that? I am using CE OS 5.2.1944 (Build 18547.0.7.3)
hey all simple question I have a older bluetooth car interface that requires a bluetooth com port to interpret AT commands to the handset.
the problem I have is that I had a program i used on my last wm6 phone that worked great however on my HD2 I get a unable to create virtual comport error.
So I am hoping someone can make a suggestion.
Thanks,
yonu
I may have found my issue I went and tried VSPD Mobile on the HD2 and according to it there is a bluetooth serial port on Com2 this may be the problem does anyone know why there are 2 bluetooth serial ports on the HD2 and if the one on Com2 can be disabled?
Thanks,
yonu