Related
I just got this phone (HTC Wizard/MDA VArio) as a free upgrade and I spent hours last night trying to hook them both up so I can simply transfer files from one to the other. I couldn't get them to link.
Are they compatable in terms of just transfering files? I was hoping to sync the address book, calender, etc
I have done a search on this forum for things relating to Macs but I'm a bit confused with some of the topics. As you can see I'm a total novice and not very technical so I was wandering if anyone can help me out in terms of easy straightforward answers?
I'm quite familiar with Macs but I've never used PC's/windows before so if I don't get any help I may need to return this phone
Cheers in advance
To my knowledge there is not presently a way to sync the MDA with a Mac, unless of course, you have an Intel-based Mac and Bootcamp installed with a copy of XP.
In time Pocket Mac or the Missing Sync will have a menas of syncing them.
Up to this point I've been transfering my phonebook via bluetooth a few contacts at a time. This is only a temporary measure and a poor one at that.
kroc_kroc said:
I'm quite familiar with Macs but I've never used PC's/windows before so if I don't get any help I may need to return this phone
Click to expand...
Click to collapse
Don't panic. The Missing Sync for Windows Mobile 5 is worth looking at. It is at alpha version 9 as of this message, and it will allow you to at least get the address book to your phone. That is a huge help.
http://www.markspace.com/testing/MSWM25_alpha.html
You can use Bluetooth to send and receive files... it works like a champ... though I'm on the Cingular 8125, so ymmv.
You can send CAB files via Bluetooth to install software. Some silly developers distribute .exe files, and those require some special attention (Open them in VPC, the find the CABs and send the from the Mac via Bluetooth. )
Anyway, don't send it back just yet! We're close.
zerologic said:
kroc_kroc said:
I'm quite familiar with Macs but I've never used PC's/windows before so if I don't get any help I may need to return this phone
Click to expand...
Click to collapse
Don't panic. The Missing Sync for Windows Mobile 5 is worth looking at. It is at alpha version 9 as of this message, and it will allow you to at least get the address book to your phone. That is a huge help.
http://www.markspace.com/testing/MSWM25_alpha.html
You can use Bluetooth to send and receive files... it works like a champ... though I'm on the Cingular 8125, so ymmv.
You can send CAB files via Bluetooth to install software. Some silly developers distribute .exe files, and those require some special attention (Open them in VPC, the find the CABs and send the from the Mac via Bluetooth. )
Anyway, don't send it back just yet! We're close.
Click to expand...
Click to collapse
Have you used Missing Sync? I have not but have heard mixed reviews -- most leaning on the negative.
I've used PocketMac and early versions messed up my address book beyond repair. In all fairness that was the original release version. More recent versions have worked perfectly.
Regardless, neither PM or MS have Windows Mobile 5 support as a stable product at this point.
shockdaddyd said:
Have you used Missing Sync? I have not but have heard mixed reviews -- most leaning on the negative.
I've used PocketMac and early versions messed up my address book beyond repair. In all fairness that was the original release version. More recent versions have worked perfectly.
Regardless, neither PM or MS have Windows Mobile 5 support as a stable product at this point.
Click to expand...
Click to collapse
I'm using Missing Sync 2.5a9 now... the alpha version, with my Cingular 8125. I'm giving it some leeway, it is alpha after all. My address book, calendar data, and tasks are all in tact.
I have no experience with PocketMac, so I can't speak to your experience with it.
that sounds promising. do you need a copy of missing sync to get the alpha?
shockdaddyd said:
that sounds promising. do you need a copy of missing sync to get the alpha?
Click to expand...
Click to collapse
Yes, and I took the risk ;-) Just be sure to read the mailing list archives before you plunk down the cash... the process is much better with a9, but it still isn't perfect.
The bottom line though is that I have all of my data on my 8125... and that rocks.
hmmmmmm....
so, on your report, i purchased missing sync. the v.2 version installed without issue. i then upgraded to the alpha and now the app won't start up -- it pops up on my screen then disappears. did you have that problem?
i've been perusing the support pages but can't find a solution.
i should rephrase that...the app starts up then quits, as in dead.
looking through their site i must say they have the worst documentation i've seen in recent years.
i've tried dumping the plist files and that doesn't seem to help.
shockdaddyd said:
i should rephrase that...the app starts up then quits, as in dead.
Click to expand...
Click to collapse
Interesting. I did not have that problem... and I don't remember that being an issue at all on the alpha mailing list. Here are the archives:
http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-testing
The developers are pretty active on it.
I'm on a PowerBook G4 1.67 17"... what are you on?
zerologic said:
shockdaddyd said:
i should rephrase that...the app starts up then quits, as in dead.
Click to expand...
Click to collapse
Interesting. I did not have that problem... and I don't remember that being an issue at all on the alpha mailing list. Here are the archives:
http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-testing
The developers are pretty active on it.
I'm on a PowerBook G4 1.67 17"... what are you on?
Click to expand...
Click to collapse
yeah, i thought it was strange. perhaps it's on my end.
i'm on a powerbook 1.25 15". if i can't figure it out i'll try again later on my dual g5 to see if i have better luck.
thanks for the reply and the link.
Hi
i am having a problem with browing any website on my PPC, the problem is that when i try to open any webpage it stalls on 1kb and it only opens the page partially.
I read another post and they managed to solve this by selecting the correct encoding which was Western European. is there any other possible reasons why this type of behaviour will be experienced on the device?
hope te hear from the superior knowledge of the forum members.
regards
reo
I had that problem when I used one of the custom roms. When I flashed the stock t-mobile ROM, it went away almost completely. Once in a great while it'll happen but I'm talking like twice since going with a stock rom. Couldn't tell you what the difference was as the stock rom performance was fine and I didn't really care enough to look into it further.
reo said:
Hi
i am having a problem with browing any website on my PPC, the problem is that when i try to open any webpage it stalls on 1kb and it only opens the page partially.
I read another post and they managed to solve this by selecting the correct encoding which was Western European. is there any other possible reasons why this type of behaviour will be experienced on the device?
hope te hear from the superior knowledge of the forum members.
regards
reo
Click to expand...
Click to collapse
I'm pretty sure it's a connection issue (I've had similar problems with, say, non-CrEme 4.1 + Toonel pre .54 combinations - see http://www.pocketpcmag.com/blogs/menneisyys/ConfigureToonel45.asp for more info).
BTW, what ROM do you have?
MTU settings could it be the reason ??
Hi
Just to let you no, recently i travelled to another country and i decided to get a sim card and test my device in this country, surprisingly it worked fine i could browse with no problems.
only from in my country on my network do i get this strange behaviour.
Do u think its related to the MTU settings ? if i adjust this then mayb it will allow me to browse, judging from your response i noticed that this option that you suggested is to reduce bandwidth usage therefore allowing to view pages faster.
Thanks kindly
reo
Yeah, this seems to be a problem with your wireless operator. (You could still give a try to it in a, say, inexpensive, GPRS-capable "dumb" phone like the S-E t68i / t610 connected to your PDA / notebook)
reo said:
Hi
Do u think its related to the MTU settings ? if i adjust this then mayb it will allow me to browse, judging from your response i noticed that this option that you suggested is to reduce bandwidth usage therefore allowing to view pages faster.
Thanks kindly
reo
Click to expand...
Click to collapse
You can surely give a try to Toonel (I've BTW linked in Toonel because, under WM5, the (old) Java version has exactly the same problems with old(er) Java environments - I've elaborated on this problem a lot in my articles. That is, the problem was similar to that of yours).
thanks for your help it is most informative, i am currently loading the toonel to test and i will post my results here.
thanks again
reo
setup using newer versions of the program, i hope it does not create an incorrect behviour.
setup toonel have just a quick query
Hi
i have managed to setup toonel version .50, using creme 4.21. i have pIE and this all on a WM5 OS.
i did not utilise the link i just executed directly from the toonel.jar file.
now it is running but i would like to just clearify that i done it correctly.
about the connections i used the method u suggested and created a new connection under the top selection which is used for programs to connect directly to the internet and named it toonel, and made all the adjustments on proxy, i also put the details of the modem which is the GPRS connection for my country.
now i am ready to use.
i have a question about the tab in Toonel called WEB, is there any setting that i should have setup in here, it has a an option called Parent Proxy address.
Regards
reo
HI
ok, i had to reset the device for things to start working properly.
now i hve to use the link, it doesnt set creme as the default JVM. so after i execute i get an error saying **cant find class client.WebUI
im sure there it is a path issue, but not sure about where is the web.ui
reo
Don't struggle with the Java version - use the new PPC-based one. See http://pocketpcmag.com/blogs/menneisyys/ConfigureToonel54.asp .
(Sorry, I've linked in the older Java version because it produced exactly the same symptomps under WM5 as yoour case, not because it's the Toonel version I recommend for you.)
hi
ok, i see. the behaviour i am experincing you noticed it using Toonel java version.
have you get any ideas what could be causing my problem ?
Now we no that it is probably a problem at my network, however is there any way to over come this ?
i actually noticed 1 thing, Magician S100 QTEK works on my network properly!!
any ideas what could be the difference ?
what are the chances that it is related to the UAProfile ? if so how could it effect the browsing ?
regards
reo
no luck with toonnel with "unlimited internet tzones"
now that tzones offers "unlimited internet" ( http://jkontherun.blogs.com/jkontherun/2006/12/got_tmobile_tzo.html ) I tried to use toonel with my wizard to speed up the connexion but didn't have any chance ... I tried the 3 versions on http://toonel.net/downloads.html (I even installed the Creme JVM) though ... some ports must still be closed ...
any idea/comment anybody ?
PS :
the good thing with "tzones unlimited internet" is that I can now use opera mini, gmail java, google maps java, etc ...
i had the same problem with uk tmobile. i called them and they said it would be fixed soon-and a few days later it was!!
maybe call your network provider before messing with your phone settings
dmonik said:
it would be fixed soon-and a few days later it was!!
Click to expand...
Click to collapse
you're right - It's working now yippee !
Hello Together,
here's solution on how to get Blackberry Connect running on Topaz:
Instructions:
------------
- Make sure you have uninstalled blackberry connect before doing the following.
- Attached you will find a small zipped executable (EnableBBCTopaz.exe). Unzip it and copy it over to the \windows\ folder of your device.
- Open a registry editor and navigate to HKLM\init
Create a new string with the name "Launch130" and a value of "EnableBBCTopaz.exe" (without the quotes of course)
If Launch130 already exists, choose a number higher than, it doesn't really matter, just make sure it is higher than the other entries so it get started after everything else.
This makes sure the exe ist started after every softreset.
- Make a softreset, or execute the EnableBBCTopaz.exe manually.
- The program changes your model-id from "HTC-Topaz" to "HTC-Raphael" in memory
- Install Blackberry Connect like you usually do (My tests where successfull with version 4.0.0.104, 4.0.0.106 didn't work for me -- just hung up after a restart)
- After installation and the auto-reset through BBC open the BBC settings and go to the Info-Tab. Under device-name there should now be HTC-Raphael.
Click to expand...
Click to collapse
The solution is in fact the one from Rhodium forum, the respect goes to them, in particular to c0rnholio. The instructions are also copied from their thread. I just changed the program to fit to Topaz.
hi gnick.
Thanks a lot for providing a solution for this issue, but I cannot get it working...
The Client keeps stating: "PIN Pending". When I try to register the account the data tunnel gets established for a second but then it gets disconnected again.
The SIM is working fine in a Blackberry.
I already tried to reinstall the BB Client several times, but I always got the same results.
The device-ID is set to HTC-Raphael, so that shouldn't cause any issues.
Additionally I tried to kill the bbmain.exe and suspended the log and security services and reenabled them after a few seconds, but still no success.
If you have any further hints on what to try, pls. let me know...
Thanks in advance,
TheOmen666
Which blackberry client version do you have?
TheOmen666 said:
hi gnick.
Thanks a lot for providing a solution for this issue, but I cannot get it working...
The Client keeps stating: "PIN Pending". When I try to register the account the data tunnel gets established for a second but then it gets disconnected again.
The SIM is working fine in a Blackberry.
I already tried to reinstall the BB Client several times, but I always got the same results.
The device-ID is set to HTC-Raphael, so that shouldn't cause any issues.
Additionally I tried to kill the bbmain.exe and suspended the log and security services and reenabled them after a few seconds, but still no success.
If you have any further hints on what to try, pls. let me know...
Thanks in advance,
TheOmen666
Click to expand...
Click to collapse
Hi again,
I tried with versions .106 and .104.
Same behaviour with both versions ;(
TheOmen666
Hmm, hard to tell, really.
Which provider do you have? Your provider needs to support HTC Raphael.
Mine (Vodafone Germany) does support HTC Raphael (Touch Pro).
gnick said:
Hmm, hard to tell, really.
Which provider do you have? Your provider needs to support HTC Raphael.
Mine (Vodafone Germany) does support HTC Raphael (Touch Pro).
Click to expand...
Click to collapse
Thanks for the tip, but I too cannot get it to work. It did work in my HTC Diamond (that's Diamond "1", not "2"). I wonder - can you change the programme to suit the Diamond 1 instead please? I mean Diamond 1 instead of HTC Raphael. I wonder if this will make a difference.
By the way, does anyone know if RIM will bring out any software to make this all work?
Hi mitsi, did it work at the end?
mitsi said:
Thanks for the tip, but I too cannot get it to work. It did work in my HTC Diamond (that's Diamond "1", not "2"). I wonder - can you change the programme to suit the Diamond 1 instead please? I mean Diamond 1 instead of HTC Raphael. I wonder if this will make a difference.
By the way, does anyone know if RIM will bring out any software to make this all work?
Click to expand...
Click to collapse
gnick said:
Hi mitsi, did it work at the end?
Click to expand...
Click to collapse
Hi Gnick, partly. I got it to work with stopping the Blackberry Service and then activating the programme (your one) after a soft reset. However, after every soft reset, I will need to do the same process.
Open MemMaid
Stop Blackberry Service
Open File Explorer
Start your programme
Open File Explorer
Start BlackberryMain.exe
Close File Explorer
Enjoy emails.
This is too much like hard work, so I think I will be either selling my Diamond 2 and going back to my Diamond 1 or keeping both, using the Diamond 1 and waiting for a better fix to become available by subscribing to this thread (and others) and hoping that decent clever chaps like yourself will come up with a fix!!!
By the way, one other item that needs fixing is that I am only able to have my work email on this. I do not have the Blackberry Secure Internet (the one to send service packs and add other email accounts). So I can't get my home email..
There is one other alternative by the way:
This is to write a Mortscript programme that does this tedious process automatically.... I have made enquiries to someone I know....
@gnick
Thats a good point, asking for the Provider...
Well I checked the websites of T-Mobile Germany and the last device I found, where you could officially download the bbconnect client was the "Kaiser" (Mda Vario III, HTC TyTN II, AT&T Tilt ).
This means, that I either have to get rid of my Topaz or convince you to make a special version where the model-id is set to the one of the Kaiser (I only found "KAIS120") but I am absolutely unsure wether this is the korrekt model id used for the bbconnect client.
Regards,
TheOmen666
Hi All,
I finally got it working.
As I am running WM 6.5 on my device, I had to change the AKU String in the Registry HKLM\System\Versions to ".1.6.3".
After changing this, I got a PIN and could do the Enterprise Activation with my account.
Thanks a lot to all for the effort to get this working on the Topaz.
Cheers,
TheOmen666
Hi All,
I too got it working. I followed the tips on this thread and on the one by cOrnholio with the following notes:
AKU set to .1.6.1
BBC version 104 worked (106 didn't) just as you said gnick .
Blackberry still crashes Manila sometimes when deleting the last email and exiting tmail.
I cannot activate my other email accounts as the Blackberry Browser (I think this is BES) does not load, even after the prompt "The internet connection is currently in use by the BlackBerry browser. Would you like to temporarily disable BlackBerry browsing? Yes/No". Once disabled and refreshed, it still does not connect. I think I read this on cOrnholio's thread.
Sent mail from pc does not redirect mail to the sent mail folder on the D2 but into the inbox instead.
The soft reset problem still exists, but it does at least work. My D2 has now had emails for the last 3 days.... Fortunately the D2 is more stable than the D1 so soft resets are required less often.
My thanks go to gnick and cOrnholio for this. I can now use my D2!
By the way, I have made some simple shortcuts which make the process following a soft reset simpler:
Add shortcut to BBMain.exe to the start menu
Add shortcut to MemMaid to the start menu
Set MemMaid to re-open at same page in Advanced Settings
A couple more tips for new people at this:
Be patient. Sometimes you can try the same solution more than twice and get different results
Be patient. The IP Address and PIN don't always appear immediately.....
Regards
Hi All,
Me too.
I got it working. I followed the same tips on this thread and on the one by cOrnholio with the following notes:
AKU set to .1.6.1
BBC version 104 worked.
Orange Romania.
Everything is ok !
mitsi said:
By the way, I have made some simple shortcuts which make the process following a soft reset simpler:
Click to expand...
Click to collapse
Hello mitsi, setting the "Launch130" key in the registry to EnableBBCTopaz.exe as described in the instruction in the first posting should ensure that EnableBBCTopaz.exe starts automatically befire BBC. This is the "clever" way to autostart it without doing any manual work. If it doesnt autostart, that could mean that you have a spelling error in the regkey name, regkey value, or that you havent placed the file in the \windows folder.
gnick said:
Hello mitsi, setting the "Launch130" key in the registry to EnableBBCTopaz.exe as described in the instruction in the first posting should ensure that EnableBBCTopaz.exe starts automatically befire BBC. This is the "clever" way to autostart it without doing any manual work. If it doesnt autostart, that could mean that you have a spelling error in the regkey name, regkey value, or that you havent placed the file in the \windows folder.
Click to expand...
Click to collapse
Hi gnick,
I must admit, I haven't checked this, but I have had problems before with Blackberry. Because our IT Dept in their wisdom have set the security to lock the phone after 60 minutes of inactivity, I keep having to unlock it. I have a Mortscript programme which does this for me thanks to EdSub, but it would appear that Blackberry takes a higher pecking order after a soft reset so the Mortscript isn't activated before Blackberry, no matter how I try to configure it. Therefore, I suspect Blackberry will start before your programme too, so it would then think the phone is a D2 instead of a Rafael immediately after soft reset.....
If your Blackberry has the Security Policy set by your IT Department, you too may have this issue, but otherwise, it may be possible to start your programme before Blackberry starts.
Isn't it all rather silly??? The things we do to get our phones to our liking eh???
Hi !
thanks for this thread !
it seems to work for me, (appear as raphael
done in a minute...now waiting my PIN
how long does it takes ?
regards
cédric
tsetse_fr said:
Hi !
thanks for this thread !
it seems to work for me, (appear as raphael
done in a minute...now waiting my PIN
how long does it takes ?
regards
cédric
Click to expand...
Click to collapse
It shouldn't take longer than a few minutes. You may be able to help it on it's way by going into Blackberry settings, then in the Utility tab, press "Register Now". Then if you go to the Identy tab your PIN and IP address should appear hopefully.
nothing appens when i press "activate now "....
same probleme with a touch hd ...Bes account has been reset ...but pin and ip still pending
i'll wait ...
want a good new : already broke my digitizer yesterday :s got to change it ...
News from HTC
Hi All,
For your information, I sent the following question to HTC:
"Dear Sirs, I have an HTC Touch Diamond 2. I have requested information before on how to get Blackberry Connect working on this phone but had the response "we don't support third party applications". This is fair enough, but please see this link: http://www.htc.com/sea/SupportViewNews.aspx?dl_id=497&news_id=61. If you support this on other HTC phones, then why not the Diamond 2? Do you have plans to develop this further? I would appreciate your help/comments on this please."
I received this response from HTC:
"New Response From [ Mike (EU team) ]
Hi Paul,
The link you found is for Asian devices, not European ones.
Blackberry Connect is not supported by HTC Europe and there are no plans to release the 3rd party application or test its compatibility.
Please contact Research In MOtion to see if there is compatible version for your device.
Best Regards
Mike"
Hopefully they will change their minds in the future. Has anyone tried RIM?
mine worked 2 days later
had to wait only because my orange data network was pending ...
now it works perfectly
Hi Folks,
1st thread on here.
Just got myself a spank new Touch Pro2. First thing i did before i started installing my apps was to check HTC website for Updates. Sure enough they had a new ROM version and WM6.5 upgrade. Now i have it working exactly how i want except for LogMeIn. I have used LogMeIN on my HP Ipaq for ages but cant get it sorted out on my HTC. Is it an issue with WM6.5 i wonders?
Basically it looks like it wont work with Opera at all. In Internet Explorer I can download and install the RActrlCE.cab file no prob. Looks good, can login to my list of computers, can even get as far as being connected to the required PC but when i click the Remote Control icon all i get is a white screen.
Any suggestions???
Have the same problem would really appreciate any help... Pls.
wm6.5 comes with the newer version of PIE (pocket internet explorer) which is not compatible with the plugin logmein uses for remote desktop. You can try and do a search to the wm6/6.1 PIE cab file. Hope that helps, cuz I was in the same boat.
LogmeIn works on my 6.5-official ROM in IE.
mostberg said:
LogmeIn works on my 6.5-official ROM in IE.
Click to expand...
Click to collapse
Not in mine!, you can install IE TOGGLE, it let's you use PocketIE (the old version of IE), with that Logmein works
log me in
it took me ages to work this out... i have to use the old version of explorer (downloaded from here somewhere, although the ie switcher might work also) and i need to use 'kfortp' which lets me type in logmein when i am connected, before i could connect but not type anything. crazy
LogMeIn's response
I raised a ticket with LogMeIn about this and got this highly useful reply 2 days later.
"We have discovered an issue when connecting to a LogMeIn computer using a mobile device running Windows Mobile 6.1.4 / 6.5 and IE6 Mobile. Currently, it is NOT possible to connect with these devices due to incompatibility with the plugin.
I hope this helps. Please feel free to contact me if you have any further questions.
Wendy Merrifield | Sr. Support Representative "
If anyone is reading this don't install kfortouchpro. Which i read on another forum was required to get this to work. I don't see what the need for it is. Plus it froze my Touch Pro2 up on the first reboot after install. Luckily i was able to connect to my phone with activesync and uninstall the app to stop my phone from freezing up . Hope this helps someone. As far as Logmein working just use the two files below. Install XDA first, reboot, install IEtoggle, open IEtoggle, switch IE to PIE, start up IE and sign into logmein. This worked for me. Hope it helps someone. Sorry if this is already on this forum somewhere else.
crazycrak said:
If anyone is reading this don't install kfortouchpro. Which i read on another forum was required to get this to work. I don't see what the need for it is. Plus it froze my Touch Pro2 up on the first reboot after install. Luckily i was able to connect to my phone with activesync and uninstall the app to stop my phone from freezing up . Hope this helps someone. As far as Logmein working just use the two files below. Install XDA first, reboot, install IEtoggle, open IEtoggle, switch IE to PIE, start up IE and sign into logmein. This worked for me. Hope it helps someone. Sorry if this is already on this forum somewhere else.
Click to expand...
Click to collapse
Great find, thanks for posting it! Anybody who's searching for a solution in the future and finds this thread will appreciate that!
crazycrak said:
Install XDA first, reboot, install IEtoggle, open IEtoggle, switch IE to PIE, start up IE and sign into logmein. This worked for me. Hope it helps someone. Sorry if this is already on this forum somewhere else.
Click to expand...
Click to collapse
I tried this and it works but now I cannot get IEtoggle to switch me back to IE6. I tried restarting and then selecting IEtoggle, thinking PIE was somehow still running, but even after this I am still stuck in PIE.
EDIT: Since this original post on 4/18 I have had to do a hard reset, since my email and SMS windows for individual messages (compose, read) were not popping up. I have no idea if it is related to using IEtoggle, but I am not going to use this again on my TouchPro2 6.5 just to be safe.
after some trial and error
Here goes, first off i apologize horizons1. I have the same phone and WM version as you. Haven't experienced any of these problems. All i can say is make sure you install XDA WM 6.1 PIE first, then reboot, then install IEtoggle might of been your problem. After further testing i have found that Kfortouchpro is necessary to log into windows from your log in screen or type any text once in windows. When opening kfortouchpro it lets you switch to M$ IME which is required for your keyboard to work. Now after testing this for a bit, if you don't switch it back to eT9/multiplay in the program before you reboot it will not display your slider bar to unlock your phone on boot up. Only way to fix is with activesync. Have tested this 3 times in different configs. I wish i could just use remote desktop thats built into WM. But i am currently connected behind two routers one being bridged to the other. Have tried many times to get this to work with no luck. So if anyone can help me with that, it would be much appreciated. Too bad logmein won't just patch this problem. Their program works great after jumping through all these hoops to get to your desktop.
sirphunkee said:
Great find, thanks for posting it! Anybody who's searching for a solution in the future and finds this thread will appreciate that!
Click to expand...
Click to collapse
Mark me down for one who appreciates this thread. After days of research and knowing the files I needed to download but am hesitant to sign up for new forums/stuff in general, you folks at xda developers got me. Looking forward to figuring out future mobile issues!
Dan
i can conect to logmein now with my HTC HD2 but my keyboard is not working :S i cant type any thing....
please help me
no buddy ?
and i got an other problem ... i can't return to PIE with IE TOGGLE.mscr softreset doesn't work ..i still get IE6
i got a HTC HD2 (T8585)
Currently I'm running the Cell Pro V11 and although I don't think this ROM-version can be the problem, I thought it was worthy mentioning.
I'm trying to get the official F1-applet going that mobile users can download from http://mobile.formula1.com but for some reason it comes up with an OutofMemory-error even when my TP2 has "only" 48% used after a soft reset.
I was wondering if anyone has experienced this as well or that maybe a JAVA-update is in order or that there is some volatile memory that needs excluding in the registry for this app to work.
Really appreciate some answers/pointers from fellow F1-fans.
Same problem for me as well. Haven't figured out what is wrong. Really wish it wasn't a Java applet.
I will look into that. Downloading and testing.
Sergio76 said:
I will look into that. Downloading and testing.
Click to expand...
Click to collapse
Much appreciated Sergio; I know you're quite the busy bee...
In the FAQ section for the TP2 you will find a link to install JavaFX.
The repeat the procedure and you will not get out of memory anymore
Thanks for that; will try later tonight or tomorrow and report back...
/edit: it works... Bit slow though but I will try it out next F1 to see how accurate it is.
Thanks for the JavaFX hint.
Installed fine but unable to login message keeps coming up with unable to find server.
Any hints mates?
stock Sprint TP2 6.5 Sense 2.5.
Woke up this AM in the USA, & lo & behold the app worked for Round 3 of the WCC - Malaysia.
Nice stuff.
Must've been server issues not allowing some of us to connect the last couple of days.
Best advice I can say for Touch Pro2 owners is download the JavaFX & install that before downloading latest F1 App.
Should be able to get the HTC soft keyboard up & running too & u can choose not to use the app's own proprietary soft keyboard.