Hi all.
I had ActiveSync setup back in California on my computer, but now that I am at my parents place and have been trying to setup activesync on there computer to sync with my mda.
I had no problems back in Cali, but now when I load ActiveSync and connect the device, etc. it says that device is not connected and therefore I cannot sync. When I plug the device the computer recongizes that there is a windows mobile device, and ActiveSync tries to connect but with no success.
Does anybody know what I should do to fix this problem? I've searched and haven't really found anything specific to my problems, and I really need to be able to sync my mda for I won't be going back to my computer for a while.
Thanx alot
peter
I'd suspect a firewall issue. Use this guide from Microsoft to troubleshoot ActiveSync 4.0/4.1/4.2 USB Connection Troubleshooting Guide
Good luck!
I've already troubleshooted, and we're talking about the firewall for my internet, right? Because if thats the case I've already disabled the firewall for all of my connections. Would there be other types of firewall that I should be aware of?
*I've tried it on another computer in the house, and I get the same problem. It recongizes a windows mobile device is connected, but it won't pick up the usb connection through activesync.
Thanx again
I am having the EXACT same problem... Does anyone know how to fix it???
Does anyone know how to fix it???
i m having the same problem
hi
i upgrade form 1.6 to 2.2, rom available at t-mobile
its fast but active sync turns green then turn off
nothing happenes
the older 1.6 rom was workin fine
well im still having this problem, so if anybody knows who how to fix it im in need of help.
btw... i haven't upgraded my rom yet.
thanx alot
try file/delete mobile device in activesync and see if it still does it.
Anymore tips??? I havent been able to sync for 2 weeks now!!!!!!!!!
I am having the same problem with my MDA. My 8125 never had this problem its quite the PITA.
May not help...
You may have already tried all this...
First, don't use Activesync 4.2. Uninstall it, reboot, and install 4.1. I couldn't get sync with two PCs with 4.2. Removing it is a nuisance since it starts automatically and doesn't have an off selection; I use activesynctoggle.exe to turn it off. I keep activesync around since activesync problems sometimes can be fixed by turning it off and on again.
Second, if you are running zonealarm or another firewall, the procedure for permitting sync is more complicated; see e.g.
http://www.pocketpcfaq.com/raj/ZA.html
Third, remove the connection from the PC (on activesync, File/Remove Connections) and from the PPC (run activesync when not connected and remove), remove activesync from the PC and reinstall, and start fresh. Use a USB cable and don't mess with Bluetooth -- it is *much* more sensitive, as I found out painfully.
Good luck. It is really amazing that microsoft can't make software that syncs two microsoft operating systems, when Palm can make software that syncs windows with the palm OS reliably. Activesync is one of the worst programs I have ever encountered, and the release of 4.2, which seems to work less well than 4.1, is astounding.
Well my device stopped recognizinig my sim car yesterday so my device is worthless.
DOES ANYONE KNOW ANYTHING THAT CAN HELP!!!!?!?!?! I HAVENT SYNCED IN 25 DAYS!!!!!!!!!!!!!!!!!!!
PLEASE HELP!!!!!!!!!!!
A little more info please. Saying you have the exact same problem isn't enough! (trust me, no two people or computers have the same problems, exactly)
Please post what you're doing, AS version, ROM version... actually anything that might help us possibly help you.
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
ROM version 2.25.11.1 WWE
ROM date: 5/11/06
Radio version 02.25.11
Protocol version 4.1.13.12
ExtROM version 2.25.11.102
Did you even try the suggestions I made?
Rjp20 said:
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
Click to expand...
Click to collapse
I have had a similar problem and solved it with those procedures. Activesync is unreasonably sensitive and sometimes removing the program and connection and starting over seems necessary; then it will work until some setting or other gets messed up.
I'm having a similar issue but when I connect my T-Mobile Vario II (HTC Hermes) it starts the process but as soon as it's about to start syncing my PC reboots. I've just got a new laptop and it syncs fine. I've been using ActiveSync for many years and this is the first time I've had this issue. I've also got an Orange SPV C500 (can't remember which HTC device that is) but it's a smartphone and it still syncs fine.
I don't have any software firewall enabled as I'm behind a hardware one. I've looked round the web but no-one seems to have this issue that the system reboots.
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Thanks in advance,
Rob.
I also had a no connection when I first connect to new computer....
Check the network connections, there should be a new network connection created for the computer/pda, check the properties and make sure all checkboxes are selected.
Mine wasn't ticked in the beginning, and was able to sync after I selected all the boxes...
WeeeRob said:
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Rob.
Click to expand...
Click to collapse
Windows XP has an event viewer (Control Panel/Administrative Tools/Event Viewer) that can probably tell you what took down your system. That would help isolate the problem - maybe.
Nothing so far... Does anyone else have any tips...
I have started to get this error whilst trying to Sync my Wizard.
I basically have the pushmail activated but stays connected to the the GPRS connection and Sync's the Normal Partnership but not the Exchange one.
Anyone got an idea how to fix this or do a workaround.
I have got this on AS 4.2 and also AS 4.5 (Beta)
Tis annoying as generally a Hard reset will sort it but I dont want to go down that route again
Anyone know of a patch for this issue ?
You just need delete the partership in your desktop and re-sync.
best luck.
More problems
This problem also appeared for me the other day, and deleting the partnership, performing a soft reset and reestablishing it does not work. Nothing has been changed (manually - I don't preclude some kind of automatic update) on the Exchange server, the network or the phone itself. Moreover, my colleague (who is the Exchange server administrator) has just bought a Hermes/Vario II and has the same problem. Is a hard reset necessary for this? Has anyone else managed to resolve this problem?
The problem just appeared for me on Monday afternoon during a routine sync, and I hadn't seen it before.
I had the 85002003 error with a client the other day.
I fixed it by just upgrading to the latest version of ActiveStink. No idea what caused it, but the upgrade fixed it.
ive been having this same problem for last few weeks. if anyone figures out whats causing this please post a fix for it.
Has anybody resolved this issue? I am having the same problem... Until a couple of days ago I was able to connect via ActiveSync to my Exchange server and syncronize all my items. Then, all of a sudden it stopped working and I get the 85002003 error. I have not changed anything on either my HTC Hermes/Cingular 8525 or my computer with my Outlook 2007 and ActiveSync 4.5 setup. I can sync with my desktop just fine. Also, I can sync over the air (OTA) using GPRS/EDGE/3G with the Exchage Server just fine...
Any help will be appreciate, please.
Thank you,
Cameron
I had the same error a couple of times and it was usually the result of an upadte to a task in outlook.
The fix I have is to go to activesync (either on phone or PC) choose options and unselect everything except email. Select ok and re-sync and then add the other items back in. Works for me each time but haven't found a permanent fix.
can anyone help me with this?
i installed active sync on both laptop and pc it all went fine but when uit detects the herald the pc/laptop restart can anyone tell me wht is goin wrong? and on the laptop i get a blue screen straight after the phone is detected
okay, seems like no one has experienced this, so ill ask is there another way to connect mt herald to my pc/ laptop via usb without using activesync?
if so please let me know much appreciated
Hi,
I have researched in the forum in order to find some issue similar than mine but unfortunally I couldn't .
I bought my Blackstone at the end of December and since that, everything worked fine: I used to sincronize data with activesync at home (Windows Vista) and in the office (Windows XP), connected the device to the internet, downloaded e-mails (using outlook or Seven Mail), used GPS (Destinator and Igo8). Everything was fine until the day I decided to perform a hard reset. Then the nighmare comes! After the hard reset I started the sincronization with activesync. Everything sincronized very well. However, when I configured my e-mail accounts the tmail.exe hanged. Also the activesync stopped sincronizing. It stays all the time with the message: "looking for changes"...but never starts sincronizing. Then, I tried to perform another hard reset. The same thing happened: the first sincro is fine (in Windows XP or Windows Vista). But then, if I configure e-mail accounts or if I reinstall GPS programs, the activesync hangs again. I can only sincro with activesync if I don't use any other connection application. If I´m using GPS application and GPRS starts, immediately GPS hangs. Is that possible? I performed probably 10-12 hard resets, reinstalled activesync 3-4 times, but the problem keeps unsolved. Anyone have a clue for this issue?
rgds
Hi
Anyone can give me a clue about that?
olivas1971 said:
Anyone can give me a clue about that?
Click to expand...
Click to collapse
Hi olivas1971 and welcome to the forum.
Your problem does sound strange & unusual. It sound as if you might need to flash another radio or ROM or both. But for that you will need to use hardspl on your device first (preferably from XP as it has less problems).
Use the search function and readup WELL before you start. Good luck with it.
Hi Abram,
I have flashed my device with new ROM and radio as you suggested. My device seems to be fine again. I´ll be monitoring it during this week. However, I want to thank you in advance, because I´m sure you find the solution.
brgds.
Can anyone help, when I connect to active sync it starts to synchronise and then freezes my phone. Anyone else have this problem or know a how to fix it. I'm using duttys HD WM6.5 Leo R6 WWE.