Anybody can share or at least point to me where I can get Dopod818 Pro dumped rom? I need to reflash my rom using sd-card because i cant connect my set to pc.
Related
I've got a IMATE JAM with 1.03 Italian ROM
I would like to know if there is a 1.11 rom in italian.
Do you think 1.11 is really better than 1.03?
hi
I have a MDA Compact and I used for long time the same ROM (JAM) as yours, and then I decided to try out the Qtek one (with radio 1.06). That's what I think:
- the qtek rom leave me more free RAM even with full extended rom customization installed
- the jam rom has a fax software that is missing in qtek one, but qtek hase pdf and ppt viewers that are missing in qtek rom
- qtek rom has BIG problem with bluetooth. I mean that if you disable it (by switching on airplane mode or by bluetooth icon and/or by some software as PocketZenPhone) it is NOT sure that you'll be able to switch bluetooth on again, even after a soft reset. You'll need a very annoying hard reset.
About Italian ROM 1.11 I have not found it yet, but I did this:
I got Italian MA_DANG_ITA_10604_119_10500_Ship.EXE , I expanded it in a folder (if you have winrar installed, just right click on EXE file) and then I did the same for MA_Dangaard_WWE_11100_129_11100_Ship. Now take radio_.nbf from WWE_11100 folder and put it in ITA_10604 folder. Find MaUpgradeUt_noID.exe around in the forum, and use this file to upgrade your Magician from ITA_10604 folder. The first time you run it it will take your Magician to serial mode and give and error. Launch a second time and it will work.
Telling the truth, if you think you'll switch on/off bluetooth a lot of time, I don't recommend you this upgrade, also because I've NOT been able to come back to JAM ROM.
Regards,
RiCCiO
Do you think i can upgrade just the 1.11 radio stacks?
I mean to use 1.03 ITA (Imatejam) + 1.11 radio stacks (Qtek).
Is it Possible?
Hi Guys
Have unlocked the extended rom on an m600 using Buzz's rom unlocker (nice work mate), and have removed files, but cant seem to get the cab files i want in there to run, they look like they are running but dont actually do anything.
Anyone had this problem, if you haevhow did you solve it.
I used aWizard on my M600. The Extended rom is then on your PC, transfer selected cab's to SD card and they run ok. The only ones I have activated are enable Edge Icon and disconnect GPRS.
I would like to flash my mda vario with the qtek rom, to solve the issue with the device resetting itself due to having a sd card installed, and to generally speed things up etc. I have visited the wizard ftp site on here, and navigated to the qtek folder, but there are about a million files listed. I am currently a UK user running an mda vario with t-mobile. Which file should I use? Once I have the correct file how do I then install it to my device? After the update will I be able to restore my previous files and settings with my SPB backup file?
Thanks!
bump
as a newbie myself maybe i can lend you a hand.
first of all...in order for you to flash your mda to other rom, you need to sim and cid unlock ur phone. then you download the latest ROM with WWE to your desktop.
connect your wizard to your pc via activesync 4.1, make sure your device is fully charge at all time. after you have sim/cid unlock ur phone, soft reset your device. then run the ROM exe file and follow on screen instruction.
before you start unlock and flasing ur phone, please use the search function and try to look for step by step instruction. thats wht i have done for a few days and manage to flash my mda vario with the latest qtek rom and a custom radio rom. cant say how happy i am with the phone now.
This is the latest qtek wwe rom ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
with spb backup no you will not be able to do a full restore because it will overwrite the registry etc..
Do a custom backup and tick all boxes except system data
From the DOPOD support website
838Pro latest ROM code for Hutchison 3 network
838Pro (WM5) ROM code for Hutchison ‘3’ network - version 1.30.707.8 This ROM code will allow you to fully utilize the Planet 3 services.
Dopod International (ANZ) Pty Ltd
Dopod 838pro new ROM code for the Hutchison ‘3’ network.
There is a new ROM code available for the Hutchison network. Please
checked the ROM code version of your 838pro and if it older than
1.30.707.8 then please feel free to download and then install it on your
838pro.
You can check the ROM code version of your 838pro by clicking
Start>Settings>System (Tab at the bottom of display screen)>Device
Information
Please note that all data and software would be lost after the ROM
update, so please make sure that you backup your data before
proceeding any further.
Please do not unplug the USB cable during the ROM update process –
this will make your device not able to boot up afterwards.
To carry out this procedure please refer to the steps as described
below:
1. Download the ‘.exe’ file from this location and then save it on your computer.
2. Connect your 838pro with your computer (via USB cable) using ActiveSync.
ActiveSync is supplied to you on the Microsoft Companion CD that came with the box. If you do not have this CD you may download ActiveSync from the following website http://www.microsoft.com/windowsmobile
3. Once the 838pro has been detected – please double click the ‘.exe’ file to start the ROM update process. Please make sure that the battery is at least 50% fully charged and follow the instructions on the screen.
4. Please unplug the 838pro from your computer after the ROM update process and let the device restart itself.
5. Once the device restarts – your 838pro will have the latest ROM code that is currently available.
Filename: RUU_Hermes_DopodAsia_AUS_1.30.707.8_1.27.30.10_WWE_SHIP.exe
Will upload the file once I got it download!!!
whoa thanks, i'm on 3 838pro as well. this is a rom or radio rom? i'm on wm6. can i flash this rom as well?
my roms :
rom version : 3.22.110.1
radio version : 1.35.00.11
williamwong said:
whoa thanks, i'm on 3 838pro as well. this is a rom or radio rom? i'm on wm6. can i flash this rom as well?
my roms :
rom version : 3.22.110.1
radio version : 1.35.00.11[/QUOT
I think not as you are already on the WM6 and it will be downgrade for you, i am not suer if you want to do it...
Click to expand...
Click to collapse
Hi, i istalled nueMassStorage on my tytn and if i connect my ppc with activesync iy's ok but if want use my tytn like storage card not work because when i connect the device on pc windows said me that hardware is not installed correctly.
How can i do?
Yhanks and sorry for my english...
Are you using a custom rom or are is it stock?
i'm useing this rom for tytn "Schap's WM6 Pro 4.31".
Remove the program you added and just use wm5Storage that is part of the rom. It does exactly what you are after.
with wm5storage it's ok...thanks!!
No problem. Glad I could help.
Im having opentouch 7.4 lite.. can i use it as mass storage device .. (hearld .. wm6.1)