Related
Hi,
I installed XDA-developers Special Edition ROM v1.2 to unlock my SX56, but I really need PPC2003 on my device.
How do I go about installing the new PPC2003 Rom? Will my device still unlocked if I do this?
Thanks for your help,
Therese
Re: How do I upgrade from Special Edition ROM v1.2 to PPC200
tperri said:
Hi,
I installed XDA-developers Special Edition ROM v1.2 to unlock my SX56, but I really need PPC2003 on my device.
How do I go about installing the new PPC2003 Rom? Will my device still unlocked if I do this?
Thanks for your help,
Therese
Click to expand...
Click to collapse
You can install it like aou install any other ROM.
Your device will be still unlocked...
HTH
Stefan
thank you!
I'll try that right away, then!
-Therese
I tried to run the instsall from Siemens and got an error me
I attached a gif oh the error
Re: I tried to run the instsall from Siemens and got an erro
the only way is to extract the nbf from the upgrade package and use sd-flash upgrade method. the original at&r siemens installer will always verify your xda rom b4 proceeding. another way would be flash back to at&t ppc2003 rom and the installer will work.
tperri said:
I attached a gif oh the error
Click to expand...
Click to collapse
I don't know how to what you suggested ...
Are there any detailed documents I can read about doing this?
Thanks!
Re: I don't know how to what you suggested ...
tperri said:
Are there any detailed documents I can read about doing this?
Thanks!
Click to expand...
Click to collapse
thats my question, anyone have some clues for a not-so savvy person to go from xda's rom to wm2003?
Thanks
hope this will help:
1. cook any wm2003 ROM from the kitchen at www.yorch.net and select the .nbf file type and download the resulted file which should be of 32 MB in size.
2. insert a 64 MB or higher SD card in your xda and use the OSImage tool in the XDAtools application to move this file to the SD card using the PC and the cradle.
3. go to the bootloader screen (power + soft reset). the xda will recognize the card content and it will be flashed.
4. do hard reset and you should get a new wm 2003 ROM by now
good luck
try this upgrade procedure
I got the same error ERROR 012: CHECK ERROR when running the PPC2003 upgrade from Siemens. So here what I did to get around this.
1. Download and install XDATools-Jeff. http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
2. To upgrade the ROM to A.30.09 ENG:
a. When install the upgrade package from Siemens, the install process created a folder named SX56 upgrade utility in your PC's Program Files folder.
b. You will find the ROM image in file NK.NBF in this path C:\Program Files\SX56 upgrade utility\english\NK.NBF
c. Use the OSImageTool from the XDAtools installed in step 1.
d. Specify Source: C:\Program Files\SX56 upgrade utility\english\NK.NBF
e. You will have 2 options for the Destination. The safest option will be download the image to the SD Memory Card, then install from the card. Or you can download the image directly to the XDA's internal ROM.
f. Folow the instruction on the screens. Should take about 5 minutes to download the image.
g. Cold boot after install is completed. Check your ROM version to make sure it is A.30.09 ENG
Note that the above procedure will only upgrade the ROM and not the Radio Stack. If you want to upgrade the Radio Stack, here is the procedure:
3. Upgrade to Radio Stack version A.33.02:
a. In the folder C:\Program Files\SX56 upgrade utility\english, you will find the following 4 files:
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUpgrade.exe
b. Use ActiveSync to copy these 4 files to your Pocket_PC's Windows directory.
c. You will then run the RSUpgrade on your Pocket PC. This will install the RS upgrade. Use the File Explorer to locate the RSUpgrade.exe and then click on this object to execute.
d. When the upgrade is completed, cold boot, then check for the Radio Version to make sure it is A.33.02.
Good luck and hope this help!
di we have to upgrade to the n radio lavel ?
I have an unlocked [email protected] Sx56 that i got form rogers.com an AT&T canada company... I personally use the unit with a Fido (microcell) plan
i did upgrade it using the instructions you posted here and it was a success...
Do i have to upgrade to the latest Radio level... now iam at A.20.10 or i would lose my GSM capabily as they say here at the forum..
thanks in advance
Ps. I noticed that my sesitivity bar grapg is allways at bar one i used to have 2 to 3 bars or is just the new graphices for ppc2003.
Thanks for the mini guide. I do have a n00b question though. What is the purpose of upgrading the Radio Stack?
Also, I'm here in the US with a T-Mobile PPC phone which I am selling (just didn't get that much use out of it). As incentive to buyers, I offered to unlock it, originally thinking that I could just use the XDAunlock.exe to do it, but it turns out the phone is a 3.14.40, I have no serial cable (only the usb cradle), and no SD card (though it would hurt to pick up one).
So is it still possible for me to unlock this phone, I guess using the XDA Special Edition ROM, without having a SD card? From reading some stuff on here, I think that's right, but if I ever need to go back to the original ROM, or upgrade to one of the WM2003 ROM, I need an SD card to use with the XDAtools?
If anyone can PM me with some general info on this stuff I would greatly appreciate it, as I really don't have time right now to scour the forums as much as I'd like to. Basically, you can see my device info in my profile, so if you can give tips on how to unlock, backup original ROM, and what I can/cannot do without a SD card, that would be wonderful. XDAUSER's post gives a good guide on upgrading to the WM2003 so I guess that's covered. Thanks in advance for helping out a n00b.
Diggin the help!
Followed the instructions from XDAUSER...works great! Thank you!
Acutally, I performed the proceedure using the Seimens 2002 update first. When I reset the device, it booted up fine...it didn't update the radio stack during the install, however.... I reset the device, it came up and created an active sync - then just ran the 2003 update utility. Worked GREAT, and updated the radio stack automagically.
p.s. I don't have a memory card, so just did it right to the device! (I was chewing my nails!)
I really appreciate this site, and the users who give great advice... :wink:
Thanks again!
Re: try this upgrade procedure
XDAUser, when I cold booted, my ROM version said 30.05 - is that ok?
How do I look at my radio stack version? Can I only see that when I cold boot?
Thanks for all your help!
Therese
XDAUSER said:
I got the same error ERROR 012: CHECK ERROR when running the PPC2003 upgrade from Siemens. So here what I did to get around this.
1. Download and install XDATools-Jeff. http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
2. To upgrade the ROM to A.30.09 ENG:
a. When install the upgrade package from Siemens, the install process created a folder named SX56 upgrade utility in your PC's Program Files folder.
b. You will find the ROM image in file NK.NBF in this path C:\Program Files\SX56 upgrade utility\english\NK.NBF
c. Use the OSImageTool from the XDAtools installed in step 1.
d. Specify Source: C:\Program Files\SX56 upgrade utility\english\NK.NBF
e. You will have 2 options for the Destination. The safest option will be download the image to the SD Memory Card, then install from the card. Or you can download the image directly to the XDA's internal ROM.
f. Folow the instruction on the screens. Should take about 5 minutes to download the image.
g. Cold boot after install is completed. Check your ROM version to make sure it is A.30.09 ENG
Note that the above procedure will only upgrade the ROM and not the Radio Stack. If you want to upgrade the Radio Stack, here is the procedure:
3. Upgrade to Radio Stack version A.33.02:
a. In the folder C:\Program Files\SX56 upgrade utility\english, you will find the following 4 files:
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUpgrade.exe
b. Use ActiveSync to copy these 4 files to your Pocket_PC's Windows directory.
c. You will then run the RSUpgrade on your Pocket PC. This will install the RS upgrade. Use the File Explorer to locate the RSUpgrade.exe and then click on this object to execute.
d. When the upgrade is completed, cold boot, then check for the Radio Version to make sure it is A.33.02.
Good luck and hope this help!
Click to expand...
Click to collapse
Upgrading Radio Stack
I'm new to the Pocket PC Phone device so not quite sure what all the enhancements goes into RS A.33.02. I heard that there is some GPRS enhancements for continous data connection. This is great if you use the XDA for data such as internet access. So far, I cannot find any official documentation from neither Siemens nor AT&T about this new RS???
My RS was at version A.20.10 and it was working fine with Cingular SIM while roaming on other networks such as T-Mobile or ATT. But as soon as I'm returning to the local service area, I got no signal on my XDA. I guess it is because I'm in a small town and their cellular network has not yet been upgraded. I contacted Cingular Technical Support but they refused to help me since I don't use their equipment. This is kindda sad because I'm working in this small town 80% of my time.
I then try to upgrade RS to the newest version A.33.02 from Siemens in hoping that it will fix the problem, but still no signal. I read somewhere in this forum that I should try to upgrad to T-Mobile RS, but when I try to download the T-Mobile upgrade file from Yorch.net, I cannot unzip the file because of its password protection. I tried to download the RS upgrade directly from T-Mobile, but I need to have a valid T-Mobile phone number (which I don't have) in order to download.
So for now, I have to use a Cingular cell phone while I'm in this small town and carry both a cell phone and my XDA. When I'm travelling outside of this local service area (roaming), I switch the SIM card. It such a pain and I hope I don't wear out the SIM card from switching it back/forth.
If the current RS is working for you, then don't upgrade it. Unless you know the new RS will give you the functionality that you will need. If you decided to upgrade, make sure you save a copy of the previous RS version in case you need to go back. Use the RS upgrade procedure as a guide.
Good Luck.
Re: Upgrading Radio Stack
I have Cingular and can't get their SIM card to work in my device - how did you do that? I was going to go out and get a T Mobile SIM instead but if I can get the Cingular to work, I won't.
Is it the radio stack version that makes using the Cingular SIM possible? If so, that is the radio stack I need to get.
Can you help me with getting that one?
TY!!!
XDAUSER said:
I'm new to the Pocket PC Phone device so not quite sure what all the enhancements goes into RS A.33.02. I heard that there is some GPRS enhancements for continous data connection. This is great if you use the XDA for data such as internet access. So far, I cannot find any official documentation from neither Siemens nor AT&T about this new RS???
My RS was at version A.20.10 and it was working fine with Cingular SIM while roaming on other networks such as T-Mobile or ATT. But as soon as I'm returning to the local service area, I got no signal on my XDA. I guess it is because I'm in a small town and their cellular network has not yet been upgraded. I contacted Cingular Technical Support but they refused to help me since I don't use their equipment. This is kindda sad because I'm working in this small town 80% of my time.
I then try to upgrade RS to the newest version A.33.02 from Siemens in hoping that it will fix the problem, but still no signal. I read somewhere in this forum that I should try to upgrad to T-Mobile RS, but when I try to download the T-Mobile upgrade file from Yorch.net, I cannot unzip the file because of its password protection. I tried to download the RS upgrade directly from T-Mobile, but I need to have a valid T-Mobile phone number (which I don't have) in order to download.
So for now, I have to use a Cingular cell phone while I'm in this small town and carry both a cell phone and my XDA. When I'm travelling outside of this local service area (roaming), I switch the SIM card. It such a pain and I hope I don't wear out the SIM card from switching it back/forth.
If the current RS is working for you, then don't upgrade it. Unless you know the new RS will give you the functionality that you will need. If you decided to upgrade, make sure you save a copy of the previous RS version in case you need to go back. Use the RS upgrade procedure as a guide.
Good Luck.
Click to expand...
Click to collapse
quick side question: where can I find the T-mobie final beta of WM2003? Did a search of the forum and can't find any info.
Also, if I use the Siemens WM2003 upgrade, then is there info I have to enter in by hand to get the phone to continue to connect to the T-mobile network? Would it just be the same values that were programmed in my phone prior to upgrading? Thx.
Re: try this upgrade procedure
tperri said:
XDAUser, when I cold booted, my ROM version said 30.05 - is that ok?
How do I look at my radio stack version? Can I only see that when I cold boot?
Thanks for all your help!
Therese
Click to expand...
Click to collapse
If you downloaded and install the upgrade from Siemens, then you should get the ROM A.30.09 ENG image. I downloaded the english version here:
http://www.my-siemens.com/MySiemens...D%2FHD%2FSX56POCKETPCPHONE%2Fdanda%2F,00.html
To check your current ROM/RS version:
Start>Settings, select System tab, click Device Information.
Re: try this upgrade procedure
Ok here is what I have in my system settings:
ROM version A.30.05 ENG
ROM date 11/17/03
Radio version 6.12
Protocol Version 324e4
I didn't get version 30.09 when I installed from this link below, I got the 30.05.
What is the radio stack you are on that allows you to use Cingular? Do you know how I can upgrade to that radio stack?
XDAUSER said:
tperri said:
XDAUser, when I cold booted, my ROM version said 30.05 - is that ok?
How do I look at my radio stack version? Can I only see that when I cold boot?
Thanks for all your help!
Therese
Click to expand...
Click to collapse
If you downloaded and install the upgrade from Siemens, then you should get the ROM A.30.09 ENG image. I downloaded the english version here:
http://www.my-siemens.com/MySiemens...D%2FHD%2FSX56POCKETPCPHONE%2Fdanda%2F,00.html
To check your current ROM/RS version:
Start>Settings, select System tab, click Device Information.
Click to expand...
Click to collapse
Re: try this upgrade procedure
I don't understand why your current ROM is not at A.30.09. Did you try to run any others ROM upgrade beside the one from Siemens? My thinking is that if you run another ROM upgrade, the file NK.NBF may got replaced. Did you try manual upgrade procedure immediately after running the Siemens' upgrade?
I knew the RS version A.20.10 will work with Cingular in roaming mode. I tried this RS version while I'm in Houston Texas, and also in Indianapolis Indiana. But when I arrived at my office in a small town 60 miles from Indianapolis, which is the Cingular local service where I got my cell phone, my XDA stopped working. I then upgrade RS to A.33.02 and still no luck.
I will be back to Houston in Feb 19, then will test the XDA with RS A.33.02.
To get the the RS A.20.10, go to www.yorch.net, click Upgrades, then select A.20.10 to download.
Regards
tperri said:
Ok here is what I have in my system settings:
ROM version A.30.05 ENG
ROM date 11/17/03
Radio version 6.12
Protocol Version 324e4
I didn't get version 30.09 when I installed from this link below, I got the 30.05.
What is the radio stack you are on that allows you to use Cingular? Do you know how I can upgrade to that radio stack?
Click to expand...
Click to collapse
Re: try this upgrade procedure
What I did was download from Siemens and it wouldn't let me install because I was using the XDA Special Edition ROM, so I installed that OSIMage tool and let that upgrade my XDA. That is all I did. Was I supposed to run another ROM upgrade besides that?
I'll wait on getting that new radio stack until I hear back from you about the other part
Thanks so much!!! You are great.
XDAUSER said:
I don't understand why your current ROM is not at A.30.09. Did you try to run any others ROM upgrade beside the one from Siemens? My thinking is that if you run another ROM upgrade, the file NK.NBF may got replaced. Did you try manual upgrade procedure immediately after running the Siemens' upgrade?
I knew the RS version A.20.10 will work with Cingular in roaming mode. I tried this RS version while I'm in Houston Texas, and also in Indianapolis Indiana. But when I arrived at my office in a small town 60 miles from Indianapolis, which is the Cingular local service where I got my cell phone, my XDA stopped working. I then upgrade RS to A.33.02 and still no luck.
I will be back to Houston in Feb 19, then will test the XDA with RS A.33.02.
To get the the RS A.20.10, go to www.yorch.net, click Upgrades, then select A.20.10 to download.
Regards
tperri said:
Ok here is what I have in my system settings:
ROM version A.30.05 ENG
ROM date 11/17/03
Radio version 6.12
Protocol Version 324e4
I didn't get version 30.09 when I installed from this link below, I got the 30.05.
What is the radio stack you are on that allows you to use Cingular? Do you know how I can upgrade to that radio stack?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hey Guys,
My friend gave me a pocket pc with phone edition. When I tried to insert my sim card it asked me to the unlock code. My friend used this mobile for T-Mobile sim card in US.
Here is the ROM Versino: 4.01.16 ENG
ROM Date: 02/04/04
Radio Version: 6.25.02
Protocol Version: 324e4
After typing my PIN code it asks me to unlok the sim.
What can I do to resolve this problem
Thanks,
bm_t
Try the XDA unlock tool. You can find it on the website.
I have unlocked tmobile using that tool. However if it gives you problems unlocking.... I would suggest installing the xda rom and then try.
I am going to unlock a new Tmobile on tuesday. If this does not work you can get in touch with me on any chat and I will walk you through the process.
lemme know if you need anymore help.
Cheers!
Diki :lol:
Thanks Diki for your reply.
I have tried XDA Unlock and XDA2Unlock but failed.
When I tried XDA2Unlock it reports some error like COM2 0X..... (Hex #)
You have seen my ROM version and Radio version. How do i install new xda rom .
I only have the USB cable. Do I need a serial cable?
thanks
As much as i know, it will not work for you to unlock your device.
xda2unlock is only for the second Version of XDA (MDA II, MDA II,...), so you have to use the xdaunlock tool.
there are several postingsa, that unlocking will fail with your radioversion.
Maybe they have changed the code in this version.
There is a guy (cgigate) that promise he is able to repair and unlock all devices, but personal i don't believe this.
i believe changing ROM will not change anything. But you can try it. Look for the XDA deelopsers special ROM 1.2 or use the 3.17.03 ROM and the unlock tool.
But flashing a device could be dangerous.
Changing the radioversion is also possible, but the risc to end ata paperweight is very high...
Stefan
Hello LumpiStefan,
Where do I found 3.17.03 ROM. I have tried in your site(Romkitchen) but I couldn't able to download.
http://lumpistefan.dynsdns.org
After selecting the ROM and some additional softwares, I clicked the 'Build Rom Now' Button but nothing comes.
Can you help me with this?
thanks
bm_t
bm_t said:
Where do I found 3.17.03 ROM. I have tried in your site(Romkitchen) but I couldn't able to download.
http://lumpistefan.dynsdns.org
After selecting the ROM and some additional softwares, I clicked the 'Build Rom Now' Button but nothing comes.
Click to expand...
Click to collapse
Cooking process works well for me.
Maybe you have to wait a few minutes more.
Cooking process can be up until 5 minutes.....
Otherwise try again the Build Rom now button....
HTH
Stefan
Hello LumpiStefan,
I have tried serveral times but I couldn't able to download the ROM.
Do I have to register or download some other application to download your ROM.
Here is what I did to download the ROM
After Entering ur site LumpiStefan, http://lumpistefan.dynsdns.org
I clicked PPC 2002 and select 3.17.03 with XDA developers (Default ).
and clicked 'Build Rom Now' button.
When I clicked 'Build Rom Now' button, the only thing that changes is the graphs (right hand side of the page). I have tried many times but only the graphs changes.
Did I miss something (some procedures or .....)
thank you for ur time
After clicking cook rom you should have the option to specify where to download it.
Hello,
I have 128 kbps line but couldn't able to download the rom for the site.
http://lumpistefan.dyndns.org/
It doesn't respond the site except changing the cpu ... graphs
Is there any other site to download 3.17.03 Rom for XDA-I.
thanks
bm_t said:
I have 128 kbps line but couldn't able to download the rom for the site.
http://lumpistefan.dyndns.org/
It doesn't respond the site except changing the cpu ... graphs
Is there any other site to download 3.17.03 Rom for XDA-I.
Click to expand...
Click to collapse
You can try http://xda.weblink.net or use http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe to download the xda developers ROM based on 3.17.03 including the unlock tool....
I think you're the first guy that has problem to download a rom from the kitchen.
What for browser are you using? Have you ever tried another ROM?
HTH
Stefan
Hi LumpiStefan,
Thanks for ur reply.
I have checked both sites (i.e http://lumpistefan.dyndns.org/ and http://xda.weblink.net)
I have tried also another rom but the same problme. I have tried to download the rom from Linux and win XP pc.
I have aslo downloaded http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
but when I executed this file from my win XP machine ( I have connected my XDA through USB cable and installed ActiveSync 3.7.1) it reports error (something like Unable to find the XDA Please connect Serial/USB cable)
I'm really really stuck with this phone
thanks
it seems that you don't followed the correct procedure.
This link it's a wizard and could help you: http://wiki.xda-developers.com/wiki/UnlockWiz
Hello Folks,
I have seen a post in form.xda-develpers.com that this file http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
will not work because my phone (i.e PC2003) (the adaptROM is not compatible with PC2003)
He said the only option to Unlock the SIM is only using this xdarit.exe application. Since my SD is 8 MB, I can't load the ROM with this space.
As far as I have seen the situation, my only option is getting the serial cable.
Do you have any suggestions?
Thanks
bm_t said:
As far as I have seen the situation, my only option is getting the serial cable.Thanks
Click to expand...
Click to collapse
Get the serial cable.
SIM Lock
Hi,
Every time I run "XDA-developers-SER-v12.exe" I get a message, error getting data, and then the program close.
plz advise. thanks
'error getting data'
I had the same error. I read somewhere on one of these posts that
there was some capatibility between Programme A.exe and Activesync 3.7.1.
Apparently you could downgrade your activesync version or use XDATools to push the nk.nbf file down to an SD card and flash from there. Use winzip or something else to extract all the files in the SER installation exec. In the English folder you'll find the NBF file to use.
In XDATools put this as the Source, target is the SD card in the device. Go to bootloader utilities (power+soft reset and maybe press contacts) and depending on your bootloader version it may detect you have a flash image on your SD card. Follow the instructions on the pda to flash the rom.
Hi rhodwyn,
Thank you for your support, but still I cannot downgrade my "BootLoader" to "5.15" with every boot I'm geeting "5.22" even after loading the spocial edition ROM.
Also, I cannot find (XDArit & Wallaby bootloader version 5.15 files) in the neet.
Please advice.
Thanks.
Hi ALL,
I did unlock (SIM LOCK) my phon.
Thanks you all for help & support.
Dear All,
Is it possible to unlock the SIM on universal
Is tit possible to change the language on the phone from french to English
Can you please guide me on how to do the above as I dont speak french
Is it possible to save the current settings on the phone if the above fails
as the operator sayzs that the warrantz on the phone is void if the language is changed or the SIM is unlocked
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
I can help you change language from french to english.
Doesn't your Universal have a place where you can download the french ROM? If not, it is still possible to backup the french ROM. A little complicated, but i'm sure i can walk you thru the process.
Regarding the unlocking, i don't think it is possible at the moments. The geniuses are working on it but as of now, you can have it unlocked thru your provider. Just pay the fee (which i think is around 20-30€)
Dear Jorgee,
I would appreciatte if you can walk me htrough the language change, I have tried the provider which is orange switherland, that the lock is definite
A Bellah
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Dear Jorge
My current configuration
operatpor 7.113.5.132
Rom version 1.13.51 FRE
Rom Date 22-09-2005
Radio 1.03.00
Protocol Version 42.36.P8
Ext rom 1.13.132 FRE
and I want to change into english
Which of the following ROM's would you like?
O2
QTEK
IMATE
Take note, flashing the ROM/Changing the language doesnt get rid of the SIM Lock
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
abellah30 said:
Dear Jorge,
Which ever you think is best out of all the three you have listed.
ANother question if I may, Would this affect the phone configurations by orange
Thanks
Click to expand...
Click to collapse
I guess if you want the fastest or newest? The fastest in MY opinion is the QTEK because it has few customizations. The newest I believe is O2 ROM
Regarding Phone configurations of Orange, the configurations are set thru a .CAB file which is stored in Extended ROM. All you have to do before changing ROM is to backup the extended ROM, then Flash the device to english, then run the CAB file that has the Orange customizations.
If you can give me a list of the files in your Extended ROM, i'll do my best to explain what each file does
Dear Jorge,
I guess I will use the same as youy which I thinkl would be the qtek.
Ok where do i get the programme to back upo the extended rom
Thanks
Backing up extended rom, have to install Total Commander. Then in total commander, type \EXTENDED_ROM which will show you the contents of the extended ROM. Just copy to the SD card and save in your computer, that's how you backup extended ROM
For backing up the OS ROM, refer to this thread as it was BUZZ that helped me find out what to do.
Its : http://www.buzzdev.net/index.php?op...=view&id=8573&catid=33&limit=15&limitstart=15
Just download the file at the bottom of this page (page 2) then continue on to page 3 and 4 which explains how to do it. Just PM me regarding where you are already and I will walk you thru the rest as I have already done the procedure
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
abellah30 said:
Hello Jorgee,
I got to this stage and created the file on the desktop but I tried to run the command in dos but I got an error message
Where can I download the qtek rom from
Thanks
A.Bellah
Click to expand...
Click to collapse
What command did you enter that caused you to get an error message?
go here ftp://xda:xdaftp.xda-developers.com/Uploads/Universal/Shipped ROMs and download UNI_Qtek_WWE_11364_151_10300_Ship.exe for the English ROM.
are you sure you don't want to backup your ROM first?
Just drop me a message if you get lost.
dos command
i want to back it up first but I am getting the folowing error on the dos command
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\> pdocread 0x0 0x3FA0000 QTEK.RAW
'pdocread' is not recognized as an internal or external command,
operable program or batch file.
Did you install EnableRapi on the PPC first before doing this?
THen you have to disable the USB connect option of ActiveSync,
Then enter Bootloader mode on yor universal,
then connect it to the computer,
then run the pdocread
is this what you did?
no I followed the articel your refered me to, I ran the enable rapi, then connected to the usb and then ran the programme.
I also tryed to download the qtek system but the link you gave me does not let me acess the site
you have to put xda:xda in the link as this is the username and password. Or use an ftp program to access the site, this might be easier
I put it in the bootloader state and still the same message
I put it in the bootloader state and still the same message, but the message on the article you refered me toi says not to do so, I have tried both methods and cantr seem to be able to get it done
Sorry, but i don't know what to say. Are you using the original cable?
Re: [AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1 (Mar07 RE-UP) | PIE QS-TOGGLE, Bat %
Jorgee said:
First step is to tell me which ROM you would like? O2, Qtek, Imate or T-Mobile?
and i assume you would like it in english?
Just tell me what ROM you need and i will walk you thru it
Click to expand...
Click to collapse
Did you do a clean install and latest gapps?
Sent from my Nexus 4
Login Dopod International Web site (www.dopodasia.com) and find that 838 ROM Code Update (English OS Only) is avilable for download.
1 Dopod 838 ROM Code Update (2006/4/19)
Dopod 838 Rom Code (2006/04/19)
ROM version: 2.21.13.1 WWE
ROM date: 03/09/06
Radio Version: 02.19.11
Protocol Version: 4.1.13.09
ExtROM version: 2.21.13.102
Updates:
1) Provides client-side support for Microsoft DirectPush (push mail).
2) Improved Comm Manager interface for 1-click DirectPush on/off and data connection detach.
Installation Guide:
*IMPORTANT! - please read these instructions carefully before updating your device
1. Download the .zip file and extract the .exe file within.
2. Ensure latest version of Activesync v4.xx is installed on PC/laptop.
3. Connect Dopod 838 to PC/laptop.
4. VERY IMPORTANT! - Ensure the Dopod 838 is connected properly to the PC/laptop.
5. Make sure the battery is charged to at least 50%.
6. Double-click on the .exe file to run the update utility
7. VERY IMPORTANT! - All data and software previously installed will be lost after the update. Please backup the data first.
8. Please close all programs when running the update utility.
9. VERY IMPORTANT! - Do not unplug the device when the update process is running, doing so may damage the device.
10. After updating, the device will reboot, this is normal.
I would like to flash my mda vario with the qtek rom, to solve the issue with the device resetting itself due to having a sd card installed, and to generally speed things up etc. I have visited the wizard ftp site on here, and navigated to the qtek folder, but there are about a million files listed. I am currently a UK user running an mda vario with t-mobile. Which file should I use? Once I have the correct file how do I then install it to my device? After the update will I be able to restore my previous files and settings with my SPB backup file?
Thanks!
bump
as a newbie myself maybe i can lend you a hand.
first of all...in order for you to flash your mda to other rom, you need to sim and cid unlock ur phone. then you download the latest ROM with WWE to your desktop.
connect your wizard to your pc via activesync 4.1, make sure your device is fully charge at all time. after you have sim/cid unlock ur phone, soft reset your device. then run the ROM exe file and follow on screen instruction.
before you start unlock and flasing ur phone, please use the search function and try to look for step by step instruction. thats wht i have done for a few days and manage to flash my mda vario with the latest qtek rom and a custom radio rom. cant say how happy i am with the phone now.
This is the latest qtek wwe rom ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
with spb backup no you will not be able to do a full restore because it will overwrite the registry etc..
Do a custom backup and tick all boxes except system data