Im actually using a BT Car Handsfree kit Parrot CK3100 with my SE z800 mobile phone... but since I started using the Universal it doesnt work.
I read somewhere that WM5.0 doesnt support BT Stereo Audio until the AKU2 WM5 is released... do you know what may I do while? It is possible to make it runing even in mono or something like that?
I use the Qtek 9000 with a Ck3100 without any problem
(except for the fact that automatic phonebook sync is not supported)
I use mine with one, not too sure of the model but its the colour one that stores contacts, and it works amazing well.
Yes that configuration works for me as well. The only issue is that it will not automatically transfer the Contacts list to the Parrot. That isn't supported with the Universal. Actually I don't bother anyway as I have the Universal in a cradle and I dial directly from it.
Can you bond the Universal with the Parrot?
i have a ck3300 and it works wonderfuly i use http://www.pocketinformant.com/products_info.php?p_id=pi&dir=wm
to beam all the contacts over... works great. from reading the parrot forums when the update is released it will sync the contacts over but not in a address format
ie at the moment i have
Paul
mobile 077
home 015
bus 015
in the new version it will be
Paul mob 077
Paul home 015
Paul Bus 015
if that makes sense
Paul
Related
Hi!
Recently I Bought a XDA-II and now i want to use it with my Sony Ericson HBH-15 bluetooth headset but XDA doent pair with it...
Kindly guide me in how to overcome with this problem or XDA doesnt support this pirticular models..
----
Sanjeev K Purohit
Had the same problem with my HBH-10, but found the solution.
You have to pair your HBH-15 with a Ericsson Phone, and then change the default passkey 0000 to a diffrent one, and then it should pair with your XDA II.
How to do so, check here
wormeyman.com/downloads/HBH10-R3B-EN.pdf
under 'changing the passkey'
A NEw Problem Now!!!
Thnx a lot bro!
But Now thr's a new problem..
Untill using MS bluetooth stack the call used to get transferred to HBH-15 but since I've installed Widdcom Bluetooth stach The widcom can pair with HBH but cant connect..
When I turn it Off and turn On MS bluetooth It transfers the call occasionally may once in five times...
Isnt thr a sure shot way(kinda some tool that will transfer the call to headset straight away...
Regards
Sanjeev :arrow:
yeah, but that's still the problem that no one got the Widcomm stack working a real 100% reliable. I know tha MS BT sucks because of the many missing profiles, and even worth it's not very 'stable' on my Magician, but still the best option. Sorry mate, but you probably have to live with it the way it is.
Hi
I just got my new BMW 330 (E90) with Navigation and Bluetooth. I can pair my MDAc but that's it.
When a call comes in, My BMW signals it. Sometimes I can get the call with the button in the steering wheel. Sometimes not. Sometimes I can but the connection breaks down in the middle of the call.
I see the reception of my MDAc in the display and when a call comes I also see the number of the caller.
I cannot make a call (dial out).
I read a lot but did not find a solution yet. Has anyone experience with BMW carkits or any advice what to change in order to get it going. I sort of refuse to have another handy...
BTW I have the latest T-Mobile Update (1.12) but I did not install everything from the extended ROM.
I have exactly the same problem with Audi bluetooth, with my Nokia 6230 works perfectly, with my S100 I have the same problems you have experienced. I have an old ROM 1.06, but I see that even with 1.12 the problems are not solved.
I tell what I tried: I've installed various BT stacks (Toshiba, Widcomm, Bluesoleil also with crack). Toshiba pairs but does not find any service, Widcomm does not run, Bluesoleil does not have the needed profiles.
I have installed the CAB from VCABT project (see the thread in this forum), I can answer from the car I can call using the car voice command but I can't use the S100 buttons.
Hope that somebody could help us.
dgv
fdigianv, have you tried the new A2DP Stereo BT Tool to see if it works better with your Audi.
I just upgraded my JAM to 1.12 and have yet to try it with my Audi A6 4.2 2005 MMI BT System.
I'm tired of waiting for Audi to fix anything. It seems like the only fixes or upgrades they offer come in the form of a new car release.
I like you can call out from the Audi, but those on thger other end of the call complain about sound quality.
I'm getting ready to make a move to the new Treo MS Mobile device, or a smartphone that works better with my Audi.
I spoke to BMW this morning and they claim has more to do with the version of Bluetooth installed on the phone than BMW's implementation of Bluetooth.
BMW supports Bluetooth verson 2 and up.
Please , please can anyone tell me if it is possible to remove the crap $icrosoft Bluetooth drivers and on my SPV M500 and install better ones. As they are so crap and have taken out alot of function.
Please tell me there is a way
Thanks
Brian
What do you want??? I'm using that same MS stack on my S110 and I cannot say I miss anything compared to Widcomm on my old iPAQ, everything I need (ActiveSync, OBEX, SerialPort) can be done via BT. What are you missing???
Besindes you can install another stack like the Toshiba one or one from Bluesoleil and disable the MS one (cannot be uninstalled because it is in ROM).
Magican with 64MB RAM cant run Widcom but maybe the 128MB ones like the S110 can, but I'm not brave enough to test it. Despite I've no idea where to get the Widcom stack for PPC.
one of the most important things is my car kit requires me to activate the serial port on port 5, but My IPAQ in the bluetooth i click on the carkit port and select connect, and works fine, but i do not have that fuction with my Orange M500, until i can connect the port it will not work so thats why i need other bluetooth software that has this fuction. it seems like $icrosoft is the onlt bluetooth stact that does not have this fuction, and they have cut it down
Hope you understand that
Well I use my Holux 236 GPS on Port5 using SPP (SerialPortProfile) so the functionality is in the MS stack for sure.
Sorry and by the way, where can i get the Toshiba one or one from Bluesoleil bluetooth stack drivers and how do i disable the $icrosoft ones
Thanks again
Brian
Yes, but it does not have the manual connect fuction like other bluetooth statcks do, and i can not connect to the carkit without it. my other device have that fuction and works well, just not my M500
Brian
You can get the bluesoleil one here: http://forum.xda-developers.com/viewtopic.php?t=18537&highlight=bluesoleil
The Toshiba one can be found here: http://forum.xda-developers.com/viewtopic.php?t=15604&highlight=toshiba
Important: Both stacks are not perfect. The bluesoleil is limited because the Magician is not a device it is registered on and because of that it has a 5MB data trasfer limit before you need to start it again (like a trial). The Toshiba one is really good but unstable at times.
You best bet is prolly the Bluesoleil one and the "trial" limitation can be removed, see here: http://forum.xda-developers.com/viewtopic.php?t=24801&highlight=bluesoleil
Instructions are avail in those two threads too. Could you let me know how it goes, I'm thinking of using another stack too.
Using a GPS mouse should work without problems. I guess you're doing something wrong. The MS stack establishes the serial port connection automatically once an application tries to use that port. I don't know how it works, but the stack can separate between a connection through the serial profile using Active Sync and a connection using a navigation software to the GPS mouse. For me, it works with no problem. I can use ActiveSync and afterwards go into my car, switch on TomTom and it connects to my bluetooth GPS mouse automatically.
I guess it also has to do how the corresponding navigation software deals with the BT stack. Therefore you should try another software and see if it works better.
It's basically true, that you can do almost everything with the crippled MS stack aswell. Even browsing the net through ActiveSync, even though it has no PAN profile. What it really lacks is the A2DP profile. I think WM5 also features HID, for keyboards, mouses and stuff.
i do not have any problem with any other bluetooth device, it just my CK3500 karkit requires you to do a manual connect, and the MS stack does not have that function.
And thanks to Private-Cowboy, will try this and post update
Thanks again
brian colston said:
i do not have any problem with any other bluetooth device, it just my CK3500 karkit requires you to do a manual connect, and the MS stack does not have that function.
And thanks to Private-Cowboy, will try this and post update
Thanks again
Click to expand...
Click to collapse
Then really it's the car kit that's at fault. :?
TheBrit, looks like you was correct, problem with the carkit
Thanks
Brian
Dandie said:
Using a GPS mouse should work without problems. I guess you're doing something wrong...
...It's basically true, that you can do almost everything with the crippled MS stack aswell. Even browsing the net through ActiveSync, even though it has no PAN profile. What it really lacks is the A2DP profile. I think WM5 also features HID, for keyboards, mouses and stuff.
Click to expand...
Click to collapse
I'm afraid I not fully agree with you...
In my case (I have a MDA Compact) for my bluetooth GPS mouse to work properly within TomTom 5, I need to bond the GPS mouse with COM5. And that means that I cannot connect simultaniously to an external GSM (for TomTom Traffic via GPRS).
Why an external phone on my MDA Compact? On the MDA I have my work provider and on an external phone I have my private provider with GPRS (a bit difficult I know).
As said to two functions together doesn't work with the MS stack because of the bonding of the GPS mouse on COM5.
Except...
Except when I install an old version of Bluetooth Tools!!! With Bluetooth tools I can bond my GPS mouse to a virtual COM port, which TomTom 5 recognizes! And now I can also use my external GPRS phone!
OK, I can have 2 connection through my MS stack. as i do it
i bound com 5 to my portable Slim GPS until and run tomtom 5.10 in my car, and that works fine, then on my car kit i click connect to paired device and it then connect fine,(so i have a com 5 connection to my GPS and a connection to my hands free car kit). all through my Orange SPV 500 at once
This work great,
But i wanted to use the car kit for handfree and GPS, but as my gps does not work on my car kit i am stuck with my portable Slim GPS unit for now
Brian
brian colston said:
OK, I can have 2 connection through my MS stack. as i do it
i bound com 5 to my portable Slim GPS until and run tomtom 5.10 in my car, and that works fine, then on my car kit i click connect to paired device and it then connect fine,(so i have a com 5 connection to my GPS and a connection to my hands free car kit). all through my Orange SPV 500 at once
This work great,
But i wanted to use the car kit for handfree and GPS, but as my gps does not work on my car kit i am stuck with my portable Slim GPS unit for now
Brian
Click to expand...
Click to collapse
Yes, it works with a handsfree carkit. But it doesn't with an external phone, maybe because the phone is a 2-way connection? Try it and you'll see it doesn't!
Ok sorry about that
Brian
I'm hoping someone is having the same experiences or can help recommend a solution.
I have trinity (Obviosuly) with the latest WM6 rom from the Manufacturer, with Radio 1.50.
I use a TomTom One v2 (with bluetooth), and a Parrot 3200ls.
The TomTom has the latest firmware, as does the Parrot.
When trying to get traffic updates to the tomtom thorugh my trinity, the connction works the first time, but switch off both the tomtom and the trinity, the connection never works again and has to be re-setup.
The Parrot will connect to the phone, but sometimes will not connect at all until i reset the trinity, when it does connect sometimes the sound and mic wont be routed to the car kit and you have top physically pick up the phone , not a good idea in communist Great Britain when your driving!
Ive tried different ROMS, I even tried downgrading my radio to 1.45 with no success.
The trinity is a great device but not being able to use the bluetooth car kit safely, and the tomtom plus services, is seriously making me consider going back to my SE k610, which I really dont want to do but I know works flawlessly.
Thanks in advance.
Craig f said:
I'm hoping someone is having the same experiences or can help recommend a solution.
I have trinity (Obviosuly) with the latest WM6 rom from the Manufacturer, with Radio 1.50.
I use a TomTom One v2 (with bluetooth), and a Parrot 3200ls.
The TomTom has the latest firmware, as does the Parrot.
When trying to get traffic updates to the tomtom thorugh my trinity, the connction works the first time, but switch off both the tomtom and the trinity, the connection never works again and has to be re-setup.
The Parrot will connect to the phone, but sometimes will not connect at all until i reset the trinity, when it does connect sometimes the sound and mic wont be routed to the car kit and you have top physically pick up the phone , not a good idea in communist Great Britain when your driving!
Ive tried different ROMS, I even tried downgrading my radio to 1.45 with no success.
The trinity is a great device but not being able to use the bluetooth car kit safely, and the tomtom plus services, is seriously making me consider going back to my SE k610, which I really dont want to do but I know works flawlessly.
Thanks in advance.
Click to expand...
Click to collapse
Hi there,
I havebeen struggling with issues on my P3600i (trinity) and Parrot 3200 LS. It seems parrot have issues with WM6. The problems I was facing was reset of parrot during call, random divert of calls through handset, I answr sometimes and have to turn off handsfree on the call menu on my phone so I can hear the caller through my handset.
Today I downloaded the latest software for the parrot and uploaded it to the car kit via bluetooth on my laptop. There is a new feature in the paired devices list of "Forced Connection". I used that and low and behold my issues apparently have stopped. I noticed that my phone book isnt synchronising but the fact that I can actually use the car kit is fantastic!!!! I have been dealing with these issues for over 7 months!
Update to the latest version and see if this fixes it.!.!.!
Hi,
i have a new JVC car radio (AVX33) with builtin Bluetooth and a Bluetooth GPS Mouse. Everything work fine also A2DP stereo but only one at time When my BA (with last Explode Rom) is connected to the radio and i want navigate with TomTom or any other programm i cant connect to the GPS mouse.
Disconnect the Radio, the GPS Mouse worked fine but when i reconnect the radio, it disconnect the GPS mouse.
Is there any way to use both at the same time?
Thanks,
tasar
It seems that all BA WM6 (6.1) ROM do not manage correctly multiple connections with BT devices at the same time. There is no way, for example, to grant BT ActiveSync connection while connected to a stupid BT hearphone (or to a GPS unit, as in your example).
I will downgrade to WM 2003 very soon...
Not good to hear But when i go back to 2003 i cant play music over BT,right? No A2DP with 2003?
Is this a problem form the BA or from WM6? I tkink to buy another PDA (which?) but when there is the same problem, i can keep my BA.
Tasar
Correct Mixture can be possible
Unfortunately, the current answer is a mixture between the WWE os and BT Software with know sacrafice.
My current build is: BA 5.2.19202 with MS BT
This is the current issue that you are defining.
Previous build:
TouchFlo 5.2.1938 with Broadcom 1.7.1
This allows the use of BT GPS and A2DP stereo at the same time.
Unfortunately it is at the cost of the phone feature. If you pair the headset feature of the of the stereo device, it will always choose the headset and not A2DP.
So the end question is: what enviroment do you want. A phone pda or pda
One final issue: The Broadcom 1.7.1 software does not work with all os. My 5.2.1902 will not work and the uninstall restores an older version of the MS BT with problems. I ended up reflashing the device.
aerotrike said:
So the end question is: what enviroment do you want. A phone pda or pda
Click to expand...
Click to collapse
What a question Of course i want a Phone PDA!
But is the Bluetooth Problem an BA problem or a WM6? I think to buy another/newer PDA but when this is an WM6 Problem i can keep my BA.
Tasar
Push this to top again.
Is there a solution for this problem...?
I want to connect my BA (WM6) to a BT-Mouse and to a BT-Headset (mono) at the same time. Does this cause any Problems, or does it work...?
Greets Rossi
You should try; i connect my BT-GPS receiver and my BT-headset in the same time, with no problems.
Can you tell which GPS and Headset, and what are youre settings...?
I tried with these and it won't work:
- Navilock BT-348 Bluetooth GPS
- MIDLAND Rider Bluetooth Headset
Which version of WM6, eg. HELMIs...?
Greets Rossi