Database Users

Error 270

I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.

diacronic said:
I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.
Click to expand...
Click to collapse
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?

dougstoner said:
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?
Click to expand...
Click to collapse
ok that was disabled. I enabled it, same problem.
Seems to be running Open Touch 5.0.
Just bought it off ebay.

Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.

If it had OpenTouch 5.0, it might have already been HardSPLed. Either way, I'm glad you found the answer yourself. It shows that you actually did your research.

diacronic said:
Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.
Click to expand...
Click to collapse
That's really not a bad idea. I know I was EXTREMELY confused the first time I flashed my rom. It took me a lot of reading to finally understand RUU stood for rom update utility. You do know for some roms, it's not necessary to hard spl. I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?

There's a walkthrough by me somewhere in the forums.

dougstoner said:
.... I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?
Click to expand...
Click to collapse
Just downloaded ivan's kitchen , but I'm having problems getting it to run. Going to use that to probably make my own and get used to the programs that are out there.

Trouble Wit My Wing

first i have no idea where i should have put this thread i figured that thiz might be right well my problem is i flashed open touch on my phone it worked good but now it just gets stuck on the blue open touch in the beginning so itryed to recover it by installin the original rom but it always goes to 1 percent and restarts to the open touch menu what should i do

boot loader
try going into boot loader and running the original t-mobile stock rom, not the new one but the one it came with. You could find all the unbricking info here
http://forum.xda-developers.com/showthread.php?t=345411 . good luck also try to hard reset by holding both soft keys and hitting the soft reset button.

O THANX DASHER U SAVED ME LOLZ Now one more question i dnt kno if i should start another thread but yea how do i install the touch it radial i followed the directions but it seems that it stays at COPYFILETOTFFS is this normal that it stays there for a while

try this
ricanchriz said:
O THANX DASHER U SAVED ME LOLZ Now one more question i dnt kno if i should start another thread but yea how do i install the touch it radial i followed the directions but it seems that it stays at COPYFILETOTFFS is this normal that it stays there for a while
Click to expand...
Click to collapse
Let it do its thing for a while I dont know if it is normal but if you need help on instaling a touch it rom or anything else read http://forum.xda-developers.com/showthread.php?t=327046 it is a very good guide written by a newb. hope that helps

and try to use proper english! It's really good fun

OK ill use proper english now and i left the thing for about 1 hour and it still hasnt moved from the copytotffs part should i disconnect it or something?

make sure
ricanchriz said:
OK ill use proper english now and i left the thing for about 1 hour and it still hasnt moved from the copytotffs part should i disconnect it or something?
Click to expand...
Click to collapse
go ahead and restart and make sure your running from the tmob stock rom and read all the directions. hope it works

OK i tried to install the tmobile stock rom but they will not install i dont know why any ideas?

ricanchriz said:
OK i tried to install the tmobile stock rom but they will not install i dont know why any ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=358615 read this and dont hard spl use uspl. you download a program called flash center. Inside the rom folder put in the NBH file of touch it and go back and click run. hope that helps

i decided to just install open touch by ttran but THANKS lolz

Flash-help needed

Hi there guys,
i have i question/problem. Yesterday i wanted to flash my cruise with the dutch M-Amine-rom. I,ve done some flashes with my old wizard somewere like a year ago. Now I did read the polaris/cruise-wike, did succesfully install hardspl. I made an activesync-connection and brought my cruise in bootloader-mode. The problem (for me though) was that when te cruise comes in bootloader mode there was no more activesync-connection, there seems to be an usb-connection because in the tree-collored screen you can see 'usb'. My problem is that de second RUU-screen makes you clear that there has to be an active-sync-connection before you can flash/update your rom. So i didn't flash because i was affraid to brick my phone. Maybe it's normal and maybe the RUU will make the connection when running but i cant find the answer to that question. Can somebody help me? Is it normal that there's no active-sync-connection in bootloader-mode? Will the RUU make the connection and flash the device anyway?
Second strange thing: i secondly decided to flash with my sd instead according the discribed procedure. I ended up with an os with the number 1.28.00.00!!! So just an older version of wm6!!?? Afterwards I flashed back the official rom (3.13...) without being in bootloader but with an activesync connection because i thought with the official one you don't have to be in bootloader. Is this a right thought?? Anyway, I succeeded to replace original rom.
Sweat on the forehead!
Thanks in advance for great help.
Greetz!
Should I remove this tread after getting an answer?

Relax Ron - you have nothing to fear
The behaviour you describe in bootloader mode is normal - no need for activesync. You can click OK and away you'll go!
As for flashing from your sd card, only thing I can think of is that you somehow renamed an old nbh file, rather than the M-Amine nbh you were trying to flash.
I've used both methods (the sd card way has got me out of trouble a couple of times) and they both work fine.
Good luck!

cr1960 said:
Relax Ron - you have nothing to fear
The behaviour you describe in bootloader mode is normal - no need for activesync. You can click OK and away you'll go!
As for flashing from your sd card, only thing I can think of is that you somehow renamed an old nbh file, rather than the M-Amine nbh you were trying to flash.
I've used both methods (the sd card way has got me out of trouble a couple of times) and they both work fine.
Good luck!
Click to expand...
Click to collapse
Thanks for quick reply. I'll try to flash this day. In fact i'm quit sure it was the right nbh-file, so that part of the problem still remains a mystery. You're a great help, Thank you.

Steady Ron said:
Thanks for quick reply. I'll try to flash this day. In fact i'm quit sure it was the right nbh-file, so that part of the problem still remains a mystery. You're a great help, Thank you.
Click to expand...
Click to collapse
Anyway if you have problems or you are not sure on how to proceed ... go here and read, is a very nice guide for Polaris
http://forum.xda-developers.com/showthread.php?t=381600
ciao ciao

bimiki said:
Anyway if you have problems or you are not sure on how to proceed ... go here and read, is a very nice guide for Polaris
http://forum.xda-developers.com/showthread.php?t=381600
ciao ciao
Click to expand...
Click to collapse
Thanks, i know that tread. I've spend lots of ours reading and searching before flashing because i want to prepare myself. I don't want to be some idiot that starts flashing before he knows what he is doing you know.
By the way. I downloaded the rom again to be really sure i have the right file.
Again thanks for your help!

Yeeeeeeeeeeeaaaaaaaaaaaaaaaaah, I succeeded!
Thanks to you all! Long live xda!
Greetz.

HELP!! would like to htc back to Original settings

hello there,
I have flashed my T-Mobile Wing and i currently have TouchFlo.
Unfortunately i'm having mayor problems with this O.S., It constanly freezes, if i'm writting a text it will go back to the home page without me doing anything, I have an outlook account every time I go to my e-mails to see them it freezes and it wont do anything else i have to reset the device.
Great looks, wont denie that, but it's just not working for me.
If someone could help me return my T-mobile wing back to O.G. settings.
Please I would Greatly apprecitated!!!

miltus said:
hello there,
I have flashed my T-Mobile Wing and i currently have TouchFlo.
Unfortunately i'm having mayor problems with this O.S., It constanly freezes, if i'm writting a text it will go back to the home page without me doing anything, I have an outlook account every time I go to my e-mails to see them it freezes and it wont do anything else i have to reset the device.
Great looks, wont denie that, but it's just not working for me.
If someone could help me return my T-mobile wing back to O.G. settings.
Please I would Greatly apprecitated!!!
Click to expand...
Click to collapse
I assume you flashed another ROM and not just installed TouchFlo onto your stock ROM? How did you flash the ROM, what ROM did you flash? Has the freezing always been this way since you flashed?
Sorry I can't give a ton of answers without more information.

ok ok .... to start out i'm a mayor nub when it comes to this..
onward, I saw a video on youtube with directions on how to flash your device...ok i plugged my T-mobile usb to my my laptop i downloaded a .rar file named "flashing with rapi enabled" It told me to put this rapi folder that was in the .rar file in my t-mobile documents,i extracted the file in desktop, double clicked it and this black box appeared with and started to to its thing.. thats it i think i flashed it DID I? The freezing started ever since i got it.
thanks for your prompt reply man appreciate it!!

Okay... The method you used is called a USPL flash. Is the device you are using a T-Mobile Wing?
EDIT: Just read your first post, nevermind about that question.
You have two choices here. You can flash back to the stock ROM... You can do this by downloading the T-Mo Stock ROM from here: http://forum.xda-developers.com/showthread.php?t=321717 . Put the phone in bootloader by holding the camera button while pressing the stylus into the reset hole. Maker sure the phone is connected to your computer. Run the installer.
or
You can flash another ROM like JustStable v2 or JustHome. You can find more info here: http://thewingster.com/ivanmmj.aspx This is what I recommend as they are great and fast ROMs. A lot faster than the stock ROM. TO flash these, you can follow the same directions you saw in the video. Just replace the nbh file in the RUU folder with the one you download from that site. Note: You cannot flash any of the ROMs marked with LZX or Micro with the method you followed before

Thanks man! I honestly thank you!
just one last question:
on your NOTE ABOUT LZX OR MICRO ROMS how would i tell which is which? are the ROMS that you are recommending LZX OR MICRO? i really dont understand.
Thanks man!!

miltus said:
Thanks man! I honestly thank you!
just one last question:
on your NOTE ABOUT LZX OR MICRO ROMS how would i tell which is which? are the ROMS that you are recommending LZX OR MICRO? i really dont understand.
Thanks man!!
Click to expand...
Click to collapse
On the link I gave you. Next to the name and version they tell you JustHome LZX, or JustStable Micro.

Thank you!!! I just flashed my t-mobile wing with justhome great stuff thnak you for all your help!!! Thank you!!!

miltus said:
Thank you!!! I just flashed my t-mobile wing with justhome great stuff thnak you for all your help!!! Thank you!!!
Click to expand...
Click to collapse
Okay, I'm glad I could help! Now that you have JustHome running, if you experience any problems or bugs, post them on this JustHome forum thread here: http://forum.xda-developers.com/showthread.php?t=498140 .

I will do that man!! Once again thank you!!!

miltus said:
hello there,
I have flashed my T-Mobile Wing and i currently have TouchFlo.
Unfortunately i'm having mayor problems with this O.S., It constanly freezes, if i'm writting a text it will go back to the home page without me doing anything, I have an outlook account every time I go to my e-mails to see them it freezes and it wont do anything else i have to reset the device.
Great looks, wont denie that, but it's just not working for me.
If someone could help me return my T-mobile wing back to O.G. settings.
Please I would Greatly apprecitated!!!
Click to expand...
Click to collapse
alright man u came to da right place
first if u still have ur touchflo rom installed then good
now hard reset the touchflo if it freezes try as many time as you can get to the point where it restarts
then when it restart connect ur wing to pc and download the pagepool size
http://www.megaupload.com/?d=JB2AC9FD
then open it (make sure active sync is enabled)
then open it there are couple of .nb and .bat files
open 6mb or 8mb (which changes the pagepool)
6mb is recommened
on ur wing it going to ask to open some file
(on custom roms it wont ask)
so after dat then it should exit itself
then disconnect usb from pc and reset ur wing (use a pen or something pointy to press the reset button on the left under volume button)
Well miltus, u just got ur wing back!!!!!!!!!!
trust me it wont freeze anymore on start up or anyway
it might freeze if you keep sliding it back and forth
it will freeze if TOO many programs running in backround example if 20 programs running then yes it will freeze.
oh yeah if u still have official rom (4.10.2.523 something like that)
then this will work, only it will be faster!!!
oh yeah say thinks!!!!!!!

thanks for the feed back man appreciate it!! but i changed the TouchFlo for another ROM named JUSTHOME WORKS GREAT!!!
Thank you for your help!!!

SPL 3.08 Warning

To all Prophet users
I flashed this SPL in the belief that it would improve the quality of the phone, but since doing this it went completey bananas with the following faults.
1. would hardly ever power up.
2. when it did power up more often than not it either went into bootloader, hung on splash screen or on the windows screen.
3. had to keep hard reseting until it did work.
4. would lose programs at random.
5. unable to flash shipped NVID rom.
6. flashing hardSPL made no difference.
7. unable to unlock CID using lokiwiz2b.
8. flickering screen.
9. battery lasts about 10 hours if your lucky.
10. battery won't charge unless removed for about 20 minutes.
11. possibly lose Wifi.
12. can not downgrade SPL.
Basically avoid this SPL like the plague. It was intended for the Charmer and not the Prophet.
The only way I sorted it out in the end was to bin the motherboard. A bit drastic I know but luckily I had a spare.
If anyone does have a solution perhaps they would be kind enough to share thier knowledge as I believe a lot of users have had the same problems.

Same problem for me .........
in my case mobile doesn't start without a charger and after that i cant put it in Bootloader mode and can't even soft/hard reset the phone. after getting on phone works very slow and cant it flash also........ what to do ????? Pls if any one can help
thnx in advance........

simppleguy said:
Same problem for me .........
in my case mobile doesn't start without a charger and after that i cant put it in Bootloader mode and can't even soft/hard reset the phone. after getting on phone works very slow and cant it flash also........ what to do ????? Pls if any one can help
thnx in advance........
Click to expand...
Click to collapse
why would u flash a SPL version not supported for the prophets and not even recomplemented by our chiefs? and is the anyway to fix this problem aswell there was already a topic about this I think its a flash error as that SPL is not for our Device at all I dont know what to tell you but I remember a user said that he is working on a fix for this problem you can contact him and ask him if he had any luck he is here http://forum.xda-developers.com/showthread.php?t=512541 user Dixiesmu good luck

SPL 3.08
If you have a look at this post it might explain more
http://forum.xda-developers.com/showthread.php?t=316062
Or this may help. IT COULD BE THE ANSWER ?
http://omgili.com/jmp/.0rSU5LtMgx8S...H.EbP4QdmWUkuYRbmEO9s76nM2NMxOxQRVoFdMr5OOPE-

SPL 3.08
I have nearly sorted this out, but need one more piece to the puzzle.
Can someone please be kind enough to tell me where the IPL and SPL are stored on the phone.
Is it in the DOC or the External Rom
Thanks in advance

Please reply fast,, m awaiting it badly

SPL3.08
If you follow the second link in post 4 this gives you the info required and it does work.
Follow this link and download the ORANGE UK Rom.
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Put your phone into bootloader and flash HARDSpl then flash the no ID rom and then follow the information provided in post 4 2nd link.
It takes a few attempts but IT does work.
Many thanks to ASRDIAS for working this one out. I am still working on a better solution and will post when available.

wen will u post the other method????????

Dear Dixiesmu,
When will u Post better Solution?????????
Kinldy post it soon ....... i can't wait .... pls help

ur working on it or no????? pls reply.

Yes I am still on the case, but for the momment stay with the original solution as my prophet is in for repairs. Found out the hard way that kids, xmas, baths and prophets are not a healthy mixture

ok will wait for ur reply.